The aim was to determine whether lead containing and lead free composite garments in current use provide the level of radiation protection stated by manufacturers. Fifteen garments, produced by five different manufacturers using eight different composites, were randomly selected for testing from four hospitals in South Australia. Labelling, material composition, design, and condition of the garments were assessed by direct garment examination, garment label, and product information. Garment attenuation was tested in a simulated angiography suite using a Siemens Ysio Max digital Xray machine. The front and back panels of each garment were tested under direct beam at 100 kVp. A Perspex phantom was used to simulate the density and scatter properties of the human abdomen. The front panels of each garment were tested under scattered radiation at Xray tube voltages of 50 and 70 kVp. Forty-seven per cent of front panels and 90% of back panels provided lower lead equivalence than claimed by the manufacturer. Twenty per cent of front panels and 62% of back panels tested did not meet the minimum International Electrotechnical Commission requirements for angiographic use. There was a 38 fold difference in front panel performance of garments to scatter radiation, which were all labelled 0.5mm lead equivalence. 56% of garments had differences in scatter transmission of at least 49% when tested at 50 and 70 kVp. The results show that lead containing and lead free composite garments probably provide less radiation protection than manufacturer stated lead equivalence. The demonstrated wide variations in attenuation of scatter radiation are greater than previously reported. It was found that most garments failed to comply with labelling standards. The study highlights challenges in radiation shielding and the need to identify composites that consistently provide better attenuation per unit weight than lead.