Diisobutylene/maleic Acid Research Articles

Allosteric inhibition of the T cell receptor by a designed membrane ligand.

The T cell receptor (TCR) is a complex molecular machine that directs the activation of T cells, allowing the immune system to fight pathogens and cancer cells. Despite decades of investigation, the molecular mechanism of TCR activation is still controversial. One of the leading activation hypotheses is the allosteric model. This model posits that binding of pMHC at the extracellular domain triggers a dynamic change in the transmembrane (TM) domain of the TCR subunits, which leads to signaling at the cytoplasmic side. We sought to test this hypothesis by creating a TM ligand for TCR. Previously we described a method to create a soluble peptide capable of inserting into membranes and binding to the TM domain of the receptor tyrosine kinase EphA2 (Alves et al., eLife, 2018). Here, we show that the approach is generalizable to complex membrane receptors, by designing a TM ligand for TCR. We observed that the designed peptide caused a reduction of Lck phosphorylation of TCR at the CD3ζ subunit in T cells. As a result, in the presence of this peptide inhibitor of TCR (PITCR), the proximal signaling cascade downstream of TCR activation was significantly dampened. Co-localization and co-immunoprecipitation in diisobutylene maleic acid (DIBMA) native nanodiscs confirmed that PITCR was able to bind to the TCR. AlphaFold-Multimer predicted that PITCR binds to the TM region of TCR, where it interacts with the two CD3ζ subunits. Our results additionally indicate that PITCR disrupts the allosteric changes in the compactness of the TM bundle that occur upon TCR activation, lending support to the allosteric TCR activation model. The TCR inhibition achieved by PITCR might be useful to treat inflammatory and autoimmune diseases and to prevent organ transplant rejection, as in these conditions aberrant activation of TCR contributes to disease.

Copolymeric nanodiscs do not retain the native membrane environment, but do maintain protein-lipid interactions.

Polymer stabilized lipid-protein nanoparticles have become invaluable tools in membrane biology since they can isolate individual proteins with their surrounding lipids. These nanoparticles, termed nanodiscs, have historically relied on membrane scaffolding proteins, but can now be formed using amphipathic copolymers that directly intercalate into membranes. Since copolymeric nanodiscs are formed directly from membranes without requiring detergent solubilization, they have been presumed to retain the native membrane environment, but this assumption has not been thoroughly tested. To test if native membrane lipid packing is retained in styrene-maleic acid (SMA) and diisobutylene-maleic acid (DIBMA) stabilized nanodiscs, lipid packing was analyzed using solvatochromic dyes Laurdan, C-Laurdan, and Pro12A. SMA and DIBMA copolymeric nanodiscs were formed from membranes increasing in complexity from single and binary lipid mixture, to biomimetic ternary mixtures composed of palmitoyl-sphingomyelin (PSM), 1-palmitoyl-2-oleoylphosphatidylcholine (POPC), and cholesterol, and ultimately to mammalian cellular membranes. For all synthetic model membranes, lipid packing of fluid-disordered membranes was significantly increased in both SMA and DIBMA nanodiscs compared to intact membranes, with DIBMA being the least perturbing. In contrast, lipid packing in ordered membranes was unaffected. For cellular membranes, lipid packing was also higher inside nanodiscs than in native membranes. Our data challenges the assumption that native membrane properties are retained inside nanodiscs. While not maintaining native membrane properties, nanodiscs can be useful models for studying protein-lipid interactions, as they are composed of membrane lipids. Interestingly, nanodiscs can exchange lipids through collisions, allowing tuning of their lipid compositions. We used this capability to analyze the preferred surrounding lipidome of multi-pass transmembrane proteins. Altogether, our studies demonstrate that copolymeric nanodiscs have different properties to those of intact membranes, but they are useful models in studying the paralipidomes of membrane proteins.

Structural Insights into Polymer-Bounded Lipid Nanodiscs.

Membrane proteins are an essential part of signaling and transport processes and are targeted by multiple drugs. To isolate and investigate them in their native state, polymer-bounded nanodiscs have become valuable tools. In this study, we investigate the lipid model system dimyristoyl-phosphocholine (DMPC) with the nanodisc-forming copolymers styrene maleic acid (SMA) and diisobutylene maleic acid (DIBMA). Using small-angle X-ray scattering (SAXS) and dynamic light scattering (DLS), we studied the influence of polymer concentration and temperature on the nanodisc structure. In Tris buffer, the size of nanodiscs formed with SMA is smaller compared to DIBMA at the same polymer ratio. In both cases, the size decreases monotonically with increasing polymer concentration, and this effect is more pronounced when using SMA. Measurements at temperatures (T) between 5 and 30 °C in phosphate buffer showed an incomplete solubilization at high T even at polymer/lipid ratios above that required for complete lipid solubilization. For DIBMA, the nanodiscs developed at lower temperatures are stable and the net repulsion increases, while for SMA, the individual nanodiscs possess smaller sizes and are less affected by T. However, using DLS, one can observe SMA agglomerates at low T. Interestingly, for both polymers, no drastic changes of the observable parameters (radius and bilayer thickness) are seen upon cooling, which would indicate a sharp (first-order) phase transition from liquid-crystalline to gel, but only gradual changes. Hence, we conclude that the transition from a gel toward a liquid-crystalline lipid phase proceeds over a broad T-range compared to a continuous lipid bilayer. These results can pave the way toward the development of better protocols for studying membrane proteins stabilized in this type of membrane mimics.

Lipid packing is disrupted in copolymeric nanodiscs compared with intact membranes

Discoidal lipid-protein nanoparticles known as nanodiscs are widely used tools in structural and membrane biology. Amphipathic, synthetic copolymers have recently become an attractive alternative to membrane scaffold proteins for the formation of nanodiscs. Such copolymers can directly intercalate into, and form nanodiscs from, intact membranes without detergents. Although these copolymer nanodiscs can extract native membrane lipids, it remains unclear whether native membrane properties are also retained. To determine the extent to which bilayer lipid packing is retained in nanodiscs, we measured the behavior of packing-sensitive fluorescent dyes in various nanodisc preparations compared with intact lipid bilayers. We analyzed styrene-maleic acid (SMA), diisobutylene-maleic acid (DIBMA), and polymethacrylate (PMA) as nanodisc scaffolds at various copolymer-to-lipid ratios and temperatures. Measurements of Laurdan spectral shifts revealed that dimyristoyl-phosphatidylcholine (DMPC) nanodiscs had increased lipid headgroup packing compared with large unilamellar vesicles (LUVs) above the lipid melting temperature for all three copolymers. Similar effects were observed for DMPC nanodiscs stabilized by membrane scaffolding protein MSP1E1. Increased lipid headgroup packing was also observed when comparing nanodiscs with intact membranes composed of binary mixtures of 1-palmitoyl-2-oleoyl-phosphocholine (POPC) and di-palmitoyl-phosphocholine (DPPC), which show fluid-gel-phase coexistence. Similarly, Laurdan reported increased headgroup packing in nanodiscs for biomimetic mixtures containing cholesterol, most notable for relatively disordered membranes. The magnitudes of these ordering effects were not identical for the various copolymers, with SMA being the most and DIBMA being the least perturbing. Finally, nanodiscs derived from mammalian cell membranes showed similarly increased lipid headgroup packing. We conclude that nanodiscs generally do not completely retain the physical properties of intact membranes.

Mechanisms of Formation, Structure, and Dynamics of Lipoprotein Discs Stabilized by Amphiphilic Copolymers: A Comprehensive Review.

Amphiphilic copolymers consisting of alternating hydrophilic and hydrophobic units account for a major recent methodical breakthrough in the investigations of membrane proteins. Styrene–maleic acid (SMA), diisobutylene–maleic acid (DIBMA), and related copolymers have been shown to extract membrane proteins directly from lipid membranes without the need for classical detergents. Within the particular experimental setup, they form disc-shaped nanoparticles with a narrow size distribution, which serve as a suitable platform for diverse kinds of spectroscopy and other biophysical techniques that require relatively small, homogeneous, water-soluble particles of separate membrane proteins in their native lipid environment. In recent years, copolymer-encased nanolipoparticles have been proven as suitable protein carriers for various structural biology applications, including cryo-electron microscopy (cryo-EM), small-angle scattering, and conventional and single-molecule X-ray diffraction experiments. Here, we review the current understanding of how such nanolipoparticles are formed and organized at the molecular level with an emphasis on their chemical diversity and factors affecting their size and solubilization efficiency.

Detergent Alternatives: Membrane Protein Purification Using Synthetic Nanodisc Polymers.

The development of styrene maleic acid (SMA) and diisobutylene maleic acid (DIBMA) copolymers provides an alternative to traditional detergent extraction of integral membrane proteins. By inserting into the membrane, these polymers can extract membrane proteins along with lipids in the form of native nanodiscs made by poly(styrene co-maleic anhydride) derivatives. Unlike detergent solubilization, where membrane proteins may lose annular lipids necessary for proper folding and stability, native nanodiscs allow for proteins to reside in the natural lipid environment. In addition, polymer-based nanodiscs can be purified using common chromatography methods similar to protocols established with detergent solubilization purification. Here we describe the solubilization screening and purification of an integral membrane protein using several commercial copolymers.

Functional solubilization of the β2-adrenoceptor using diisobutylene maleic acid

SummaryThe β2-adrenoceptor (β2AR) is a well-established target in asthma and a prototypical G protein-coupled receptor for biophysical studies. Solubilization of membrane proteins has classically involved the use of detergents. However, the detergent environment differs from the native membrane environment and often destabilizes membrane proteins. Use of amphiphilic copolymers is a promising strategy to solubilize membrane proteins within their native lipid environment in the complete absence of detergents. Here we show the isolation of the β2AR in the polymer diisobutylene maleic acid (DIBMA). We demonstrate that β2AR remains functional in the DIBMA lipid particle and shows improved thermal stability compared with the n-dodecyl-β-D-maltopyranoside detergent-solubilized β2AR. This unique method of extracting β2AR offers significant advantages over previous methods routinely employed such as the introduction of thermostabilizing mutations and the use of detergents, particularly for functional biophysical studies.

Nanoscale Model System for the Human Myelin Sheath.

Neurodegenerative disorders are among the most common diseases in modern society. However, the molecular bases of diseases such as multiple sclerosis or Charcot-Marie-Tooth disease remain far from being fully understood. Research in this field is limited by the complex nature of native myelin and by difficulties in obtaining good in vitro model systems of myelin. Here, we introduce an easy-to-use model system of the myelin sheath that can be used to study myelin proteins in a native-like yet well-controlled environment. To this end, we present myelin-mimicking nanodiscs prepared through one of the amphiphilic copolymers styrene/maleic acid (SMA), diisobutylene/maleic acid (DIBMA), and styrene/maleimide sulfobetaine (SMA-SB). These nanodiscs were tested for their lipid composition using chromatographic (HPLC) and mass spectrometric (MS) methods and, utilizing spin probes within the nanodisc, their comparability with liposomes was studied. In addition, their binding behavior with bovine myelin basic protein (MBP) was scrutinized to ensure that the nanodiscs represent a suitable model system of myelin. Our results suggest that both SMA and SMA-SB are able to solubilize the myelin-like (cytoplasmic) liposomes without preferences for specific lipid headgroups or fatty acyl chains. In nanodiscs of both SMA and SMA-SB (called SMA(-SB)-lipid particles, short SMALPs or SMA-SBLPs, respectively), the polymers restrict the lipids' motion in the hydrophobic center of the bilayer. The headgroups of the lipids, however, are sterically less hindered in nanodiscs when compared with liposomes. Myelin-like SMALPs are able to bind bovine MBP, which can stack the lipid bilayers like in native myelin, showing the usability of these simple, well-controlled systems in further studies of protein-lipid interactions of native myelin.

Structures and Dynamics of Native-State Transmembrane Protein Targets and Bound Lipids.

Membrane proteins work within asymmetric bilayers of lipid molecules that are critical for their biological structures, dynamics and interactions. These properties are lost when detergents dislodge lipids, ligands and subunits, but are maintained in native nanodiscs formed using styrene maleic acid (SMA) and diisobutylene maleic acid (DIBMA) copolymers. These amphipathic polymers allow extraction of multicomponent complexes of post-translationally modified membrane-bound proteins directly from organ homogenates or membranes from diverse types of cells and organelles. Here, we review the structures and mechanisms of transmembrane targets and their interactions with lipids including phosphoinositides (PIs), as resolved using nanodisc systems and methods including cryo-electron microscopy (cryo-EM) and X-ray diffraction (XRD). We focus on therapeutic targets including several G protein-coupled receptors (GPCRs), as well as ion channels and transporters that are driving the development of next-generation native nanodiscs. The design of new synthetic polymers and complementary biophysical tools bodes well for the future of drug discovery and structural biology of native membrane:protein assemblies (memteins).

Molecular‐Level Interactions of Nanodisc‐Forming Copolymers Dissected by EPR Spectroscopy

AbstractThis study focuses on analyzing the noncovalent interaction patterns between three lipid‐nanodisc‐forming polymers and nitroxide radicals which are used as small organic tracer molecules. Besides the negatively charged polymers diisobutylene/maleic acid (DIBMA) and styrene/maleic acid (SMA) (2:1), the solvation behavior of a newly synthesized zwitterionic styrene/maleic amide sulfobetaine copolymer named SMA‐sulfobetaine (SB) is characterized. The applied spin probes vary in their respective chemical structure, allowing the report of different local micropolarities and nanoscopic regions by recording temperature‐dependent continuous‐wave electron paramagnetic resonance (CW EPR) spectra. In combination with light scattering experiments, a nanoscopic interpretation of the dominant polymer/guest molecule interaction patterns is provided. The results indicate that in SMA and DIBMA, ionic interactions dominate the interaction patterns with other molecules. In SMA‐SB, the zwitterionic side chains mainly induce a dynamic assembly with guest molecules due to weaker noncovalent interactions. Depending on the applied spin probe, temperature‐dependent CW EPR measurements reveal nanoscopic cloud points depending on the interaction patterns with SMA‐SB which can occur more than 20 °C below its macroscopically observed upper critical solution temperature. Finally, the detailed dissection of interaction patterns may provide a better understanding that may even allow tuning the polymers’ properties for use in lipid nanodisc formation.

Structure of Diisobutylene Maleic Acid Copolymer (DIBMA) and Its Lipid Particle as a "Stealth" Membrane-Mimetic for Membrane Protein Research.

The study of membrane proteins remains challenging, especially in a native membrane environment. Recently, major progress has been made using maleic acid copolymers, such as styrene maleic acid, to purify membrane proteins and study them directly with native lipids associated with the membrane. Additional maleic acid copolymers, such as diisobutylene maleic acid (DIBMA) membrane-mimetic systems, are being developed and found to have improved spectroscopic properties and pH stability. We studied DIBMA and its lipid particles in solution to better understand its assembly, without and with the lipids, to provide an insight regarding how to use it in solution for better membrane extraction. Using small-angle neutron and X-ray scattering (SANS/SAXS), we show that DIBMA organizes into structures of different size scales at various concentrations and ionic strengths. The polymer performed reasonably well under most solvent conditions except in very low concentrations and high-salt conditions that could result in limited interaction with lipids. To explore DIBMA lipid particles as a suitable membrane-mimetic system for neutron scattering studies of membrane proteins, we measured and determined the contrast-matching point of DIBMA to be ∼12% (v/v) D2O - similar to that of most protiated lipid molecules but distinct from that of regular protiated proteins - providing a natural contrast for separating their neutron scattering signals. Using SANS contrast variation, we demonstrated that the scattering from the whole lipid particle can be annihilated. Further, we determined that a well-defined lipid nanodisc structure with DIBMA was contrast-matched. These results demonstrate that the DIBMA lipid particle is an outstanding "stealth" membrane-mimetic for membrane proteins. The results provide a structural framework for understanding the organization and assembly process of the polymer itself and the lipid molecules. Such an understanding is imperative for structural techniques such as cryo-electron microscopy, nuclear magnetic resonance, small-angle scattering, and other biophysical techniques.

Detergent-free purification and reconstitution of functional human serotonin transporter (SERT) using diisobutylene maleic acid (DIBMA) copolymer

Structure and function analysis of human membrane proteins in lipid bilayer environments is acutely lacking despite the fundame1ntal cellular importance of these proteins and their dominance of drug targets. An underlying reason is that detailed study usually requires a potentially destabilising detergent purification of the proteins from their host membranes prior to subsequent reconstitution in a membrane mimic; a situation that is exacerbated for human membrane proteins due to the inherent difficulties in overexpressing suitable quantities of the proteins. We advance the promising styrene maleic acid polymer (SMA) extraction approach to introduce a detergent-free method of obtaining stable, functional human membrane transporters in bilayer nanodiscs directly from yeast cells. We purify the human serotonin transporter (hSERT) following overexpression in Pichia pastoris using diisobutylene maleic acid (DIBMA) as a superior method to traditional detergents or the more established styrene maleic acid polymer. hSERT plays a pivotal role in neurotransmitter regulation being responsible for the transport of the neurotransmitter 5-hydroxytryptamine (5-HT or serotonin). It is representative of the neurotransmitter sodium symporter (NSS) family, whose importance is underscored by the numerous diseases attributed to their malfunction. We gain insight into hSERT activity through an in vitro transport assay and find that DIBMA extraction improves the thermostability and activity of hSERT over the conventional detergent method.

Lipid Dynamics in Diisobutylene-Maleic Acid (DIBMA) Lipid Particles in Presence of Sensory Rhodopsin II.

Amphiphilic diisobutylene/maleic acid (DIBMA) copolymers extract lipid-encased membrane proteins from lipid bilayers in a detergent-free manner, yielding nanosized, discoidal DIBMA lipid particles (DIBMALPs). Depending on the DIBMA/lipid ratio, the size of DIBMALPs can be broadly varied which makes them suitable for the incorporation of proteins of different sizes. Here, we examine the influence of the DIBMALP sizes and the presence of protein on the dynamics of encased lipids. As shown by a set of biophysical methods, the stability of DIBMALPs remains unaffected at different DIBMA/lipid ratios. Coarse-grained molecular dynamics simulations confirm the formation of viable DIBMALPs with an overall size of up to 35 nm. Electron paramagnetic resonance spectroscopy of nitroxides located at the 5th, 12th or 16th carbon atom positions in phosphatidylcholine-based spin labels reveals that the dynamics of enclosed lipids are not altered by the DIBMALP size. The presence of the membrane protein sensory rhodopsin II from Natronomonas pharaonis (NpSRII) results in a slight increase in the lipid dynamics compared to empty DIBMALPs. The light-induced photocycle shows full functionality of DIBMALPs-embedded NpSRII and a significant effect of the protein-to-lipid ratio during preparation on the NpSRII dynamics. This study indicates a possible expansion of the applicability of the DIBMALP technology on studies of membrane protein–protein interaction and oligomerization in a constraining environment.

Evaluation of DIBMA nanoparticles of variable size and anionic lipid content as tools for the structural and functional study of membrane proteins

Amphiphilic maleic acid-containing polymers allow for the direct extraction of membrane proteins into stable, homogenous, water-soluble copolymer/lipid nanoparticles without the use of detergents. By adjusting the polymer/lipid ratio, the size of the nanoparticles can be tuned at convenience for the incorporation of protein complexes of different size. However, an increase in the size of the lipid nanoparticles may correlate with increased sample heterogeneity, thus hampering their application to spectroscopic and structural techniques where highly homogeneous samples are desirable. In addition, size homogeneity can be affected by low liposome solubilization efficiency by DIBMA, which carries a negative charge, in the presence of high lipid charge density.In this work, we apply biophysical tools to characterize the size and size heterogeneity of large (above 15 nm) lipid nanoparticles encased by the diisobutylene/maleic acid (DIBMA) copolymer at different DIBMA/lipid ratios and percentages of anionic lipids. Importantly, for nanoparticle preparations in the diameter range of 40 nm or below, the size homogeneity of the DIBMA/lipid nanoparticles (DIBMALPs) remains unchanged. In addition, we show that anionic lipids do not affect the production, size and size homogeneity of DIBMALPs. Furthermore, they do not affect the overall lipid dynamics in the membrane, and preserve the functionality of an enclosed membrane protein.This work strengthens the suitability of DIBMALPs as universal, native-like lipid environments for functional studies of membrane proteins and provide useful insight on the suitability of these systems for those structural techniques requiring highly homogeneous sample preparations.

The MscS-like channel YnaI has a gating mechanism based on flexible pore helices

The mechanosensitive channel of small conductance (MscS) is the prototype of an evolutionarily diversified large family that fine-tunes osmoregulation but is likely to fulfill additional functions. Escherichia coli has six osmoprotective paralogs with different numbers of transmembrane helices. These helices are important for gating and sensing in MscS but the role of the additional helices in the paralogs is not understood. The medium-sized channel YnaI was extracted and delivered in native nanodiscs in closed-like and open-like conformations using the copolymer diisobutylene/maleic acid (DIBMA) for structural studies. Here we show by electron cryomicroscopy that YnaI has an extended sensor paddle that during gating relocates relative to the pore concomitant with bending of a GGxGG motif in the pore helices. YnaI is the only one of the six paralogs that has this GGxGG motif allowing the sensor paddle to move outward. Access to the pore is through a vestibule on the cytosolic side that is fenestrated by side portals. In YnaI, these portals are obstructed by aromatic side chains but are still fully hydrated and thus support conductance. For comparison with large-sized channels, we determined the structure of YbiO, which showed larger portals and a wider pore with no GGxGG motif. Further in silico comparison of MscS, YnaI, and YbiO highlighted differences in the hydrophobicity and wettability of their pores and vestibule interiors. Thus, MscS-like channels of different sizes have a common core architecture but show different gating mechanisms and fine-tuned conductive properties.

Functional Solubilisation of the Β2-Adrenoceptor (Β <sub>2</sub>AR) Using Diisobutylene Maleic Acid (DIBMA)

The β2-adrenoceptor (β2AR) is a well-established target in asthma and a prototypical GPCR for biophysical studies. Solubilisation of membrane proteins has classically involved the use of detergents. However, the detergent environment differs from the native membrane environment and often destabilises membrane proteins. Use of amphiphilic copolymers is a promising strategy to solubilise membrane proteins within their native lipid environment in the complete absence of detergents. Here we show the isolation of the β2AR in the polymer Diisobutylene maleic acid (DIBMA). We demonstrate that β2AR remains functional in the DIBMA lipid particle (DIBMALP) and shows improved thermal stability compared to the n-Dodecyl-β-D-Maltopyranoside (DDM) detergent solubilised β2AR. This unique method of extracting β2AR offers significant advantages over previous methods routinely employed such as the introduction of thermostabilising mutations and the use of detergents, particularly for functional biophysical studies.

Solubilization and Stabilization of Membrane Proteins by Cycloalkane-Modified Amphiphilic Polymers.

Membrane proteins (MPs) need to be extracted from biological membranes and purified in their native state for most structural and functional in vitro investigations. Amphiphilic copolymers, such as amphipols (APols), have emerged as very useful alternatives to detergents for keeping MPs water-soluble under their native form. However, classical APols, such as poly(acrylic acid) (PAA) derivatives, seldom enable direct MP extraction. Poly(styrene maleic anhydride) copolymers (SMAs), which bear aromatic rings as hydrophobic side groups, have been reported to be more effective extracting agents. In order to test the hypothesis of the role of cyclic hydrophobic moieties in membrane solubilization by copolymers, we have prepared PAA derivatives comprising cyclic rather than linear aliphatic side groups (CyclAPols). As references, APol A8-35, SMAs, and diisobutylene maleic acid (DIBMA) were compared with CyclAPols. Using as models the plasma membrane of Escherichia coli and the extraction-resistant purple membrane from Halobacterium salinarum, we show that CyclAPols combine the extraction efficiency of SMAs with the stabilization afforded to MPs by classical APols such as A8-35.

Lipid exchange among polymer-encapsulated nanodiscs by time-resolved Förster resonance energy transfer.

Some amphiphilic copolymers such as diisobutylene/maleic acid (DIBMA) and styrene/maleic acid (SMA) copolymers are able to directly extract cellular membranes into nanosized polymer-bounded lipid-bilayer patches. These polymer-encapsulated nanodiscs offer the possibility to investigate delicate membrane proteins along with their surrounding lipids and, thus, protein/lipid interactions, in a near-native bilayer environment. By dissecting the kinetics of lipid exchange among DIBMA- and SMA-bounded nanodiscs, we have recently shown that the encapsulated lipid bilayer does not represent a static snapshot of the membrane at the time point of solubilisation. Instead, nanoscale lipid-bilayer patches remain in equilibrium with one another through lipid exchange enabled by nanodisc collisions. This finding is important for correctly interpreting any attempts at studying protein/lipid interactions with the aid of polymer-based nanodiscs and will be relevant to characterising the rapidly growing repertoire of new amphiphilic copolymers for membrane extraction. A highly sensitive and efficient technique for measuring the kinetics of lipid transfer among various kinds of nanosized membrane mimics consists in time-resolved Förster resonance energy transfer (TR-FRET) monitored in a stopped-flow apparatus. Here, we provide detailed instructions on how to measure the kinetics and unravel the underlying mechanisms of lipid exchange among lipid-bilayer nanodiscs under various solution conditions.

A comparison of SMA (styrene maleic acid) and DIBMA (di-isobutylene maleic acid) for membrane protein purification

The use of styrene maleic acid co-polymer (SMA) for membrane protein extraction and purification has grown in recent years. SMA inserts in the membrane and assembles into small discs of bilayer encircled by polymer, termed SMA lipid particles (SMALPs). This allows purification of membrane proteins whilst maintaining their lipid bilayer environment. SMALPs offer several improvements over conventional detergent approaches, however there are limitations, most notably a sensitivity to low pH and divalent cations. Recently it was shown that the aliphatic diisobutylene-maleic acid (DIBMA) copolymer, was also able to directly solubilise membranes forming DIBMALPs (DIBMA lipid particles), and that this polymer overcame some of the limitations of SMA. In this study the ability of DIBMA to solubilise and purify functional membrane proteins has been compared to SMA. It was found that DIBMA is able to solubilise several different membrane proteins from different expression systems, however for some proteins it gives a lower yield and lower degree of purity than SMA. DIBMA extracted G protein-coupled receptors retain ligand- and G protein-binding. DIBMALPS are larger than SMALPs and display a decreased sensitivity to magnesium. However the stability of DIBMALPs appears to be lower than SMALPs. The lower purity and lower stability are likely linked to the larger size of the DIBMALP particle. However, this also offers a potentially less rigid lipid environment which may be more amenable to protein dynamics. Therefore the optimal choice of polymer will depend on which features of a protein are to be investigated.

Membrane Solubilization by Diisobutylene-Maleic Acid (DIBMA) Copolymers and Characterization of the Resulting Native Nanodiscs

Amphipathic copolymers such as styrene-maleic acid (SMA) [1,2] and more recently diisobutylene-maleic acid (DIBMA) [3] are gaining attention due to their ability to spontaneously solubilize lipid bilayers into discoidal nanoparticles. As such they are convenient tools to isolate and study membrane proteins within their native lipid environment. For SMA copolymers it has been shown that average length and composition of the copolymers are important parameters in determining the efficiency of solubilization and properties of the resulting nanodiscs.