Electronic Devices Research Articles

High-Performance Gate-Voltage-Tunable Photodiodes Based on Nb2Pd3Se8/WSe2 Mixed-Dimensional Heterojunctions.

The mixed-dimensional (MD) van der Waals (vdWs) heterojunction for photodetectors has garnered significant attention owing to its exceptional compatibility and superior quality. Low-dimensional material heterojunctions exhibit unique photoelectric properties attributed to their nanoscale thickness and vdWs contact surfaces. In this work, a novel MD vdWs heterojunction composed of one-dimensional (1D) Nb2Pd3Se8 nanowires and two-dimensional (2D) WSe2 nanosheets is proposed. The heterojunction's energy band engineering is accomplished by manipulating the Fermi level of the bipolar 2D material via gate voltage, resulting in a rectification characteristic that can be adjusted with gate voltage. Under 685 nm laser irradiation, it demonstrates exceptional self-powered photodetection performance, attaining a photoresponsivity of 1.45 A W-1, an ultrahigh detectivity of 6.8 × 1012 Jones, and an ultrafast response time of 37/64 μs at zero bias. In addition, a broadband photodetector from 255 to 1064 nm is realized. These results demonstrate the great potential of Nb2Pd3Se8/WSe2 MD heterostructures for advanced electronic and optoelectronic devices.

The value of D-dimer in the prognosis of dilated cardiomyopathy: a retrospective cohort study.

D-dimer is a biomarker of coagulation and fibrinolytic system activation in response to the hypercoagulable state of the body. The research aimed to analyze the value of D-dimer in the prognosis of patients with dilated cardiomyopathy (DCM). Patients admitted to our center for the first time with DCM were enrolled consecutively. The clinical characteristics variables were obtained from the electronic medical record system, and the prognostic information was obtained using telephone return visits and a review of repeated hospitalization records. Univariate and multivariate Cox regression was used to explore the association of D-dimer with all-cause mortality. Smooth curve fitting, threshold saturation effect analysis, and subgroup analysis were performed. Ultimately, 534 patients were included. After a follow-up of the enrolled patients, 485 patients obtained prognostic information, of which 159 died from all causes, and the main cause of death was heart failure (89/159), the sudden death accounted for about 17%. The independent positive association between D-dimer and all-cause mortality remained unchanged in both unadjusted and adjusted Cox regression models. In the fully adjusted model, each standard deviation increase in D-dimer was associated with a 14% increase in all-cause mortality (HR = 1.14; 95% CI: 1.02 ~ 1.27; P < 0.05). Curve fitting and threshold effect analysis showed an inflection point in the relationship between D-dimer and all-cause mortality (non-linear test: P = 0.03). When D-dimer was equal to 362ng/ml, HR = 1; and as the value increased, the risk of all-cause mortality increased by 34.7% for every 2-fold increase in D-dimer gradually (HR = 1.347; 95% CI: 1.069 ~ 1.697; P = 0.012). In subgroup analysis, D-dimer and BMI had a significant interaction on all-cause mortality, with a significantly increased risk of all-cause mortality in subjects with BMI ≥ 25kg/m2 (HR = 1.99; 95% CI: 1.34 ~ 2.97; P < 0.01). The ROC curve showed that D-dimer was a good predictor of all-cause mortality, and the areas under the curve at 1-, 3-, and 5-year were 0.71, 0.64, and 0.59, respectively. In addition, D-dimer improved the predictive performance of the MAGGIC heart failure score in patients with DCM. D-dimer is not only independently associated with all-cause mortality in DCM patients, but also has good predictive value, suggesting that D-dimer may be an early and useful marker for improving the management of DCM patients.

Health Indicator Development for Low-Voltage Battery Diagnostics and Prognostics in Electric Vehicles

Each electric vehicle (EV) requires a low-voltage (e.g., 12V) auxiliary battery to provide electric power to onboard electronic control units, lighting systems, and various sensors during power off. Therefore, when the low-voltage battery is in low state of health (SOH) or low state of charge (SOC), it may cause no-start events. The existing OnStar Proactive Alert service can effectively predict low SOC or low SOH events for low-voltage batteries in Internal Combustion Engine vehicles using cranking signals. However, it does not work for EVs since there is no cranking event. In this work, a diagnostic and prognostic solution for the low-voltage battery of EVs is proposed. Four novel health indicators (HIs) along with the decision-making system are developed based on equivalent circuit models. Furthermore, the selection process of appropriate HIs tailored to various operational states of the vehicle is described. The validation results based on GM test EV data have demonstrated the effectiveness and robustness of the proposed solution.

Flexible Thermoelectric BiSbTe/Carbon Paper/BiSbTe Sandwiches for Bimode Temperature‐Pressure Sensors

AbstractBimode temperature‐pressure sensors hold significant promise in personal health monitoring, wearables and robotic signal detection. Traditional bimode sensors typically combine two independent sensors, leading to fabrication complexity. This study develops a bimode temperature‐pressure sensor by using a facile electrodeposition method to create sandwiched BiSbTe/Carbon Paper/BiSbTe thin films and stacking them to a vertical structure. It demonstrates high sensitivity for temperature sensing, capable of detecting temperature difference as low as 1 K, and a rapid response time of 0.92 s due to a vertical structure. Utilizing its thermoelectric mechanism, the sensor achieves self‐powered sensing for finger touch and respiration states. Furthermore, its island‐like contact surface ensures high sensitivity with an extremely fast response time of 0.17 s, by rapidly changing contact resistance under pressure, allowing it to detect various human behaviors, including body movements and micro‐expressions. Beyond its sensing capabilities, the film excels in flexibility, electromagnetic interference shielding, and stability, presenting significant potential for integration into self‐powered electronic skin systems for health monitoring, wearables, artificial intelligence, and other electronic skin applications.

Clinical profile and etiological spectrum of patients presenting with corneal hydrops over a 12-year period.

To describe the demographics, clinical characteristics, and management of corneal hydrops in patients presenting to a multi-tier ophthalmology hospital network in India. Cross-sectional hospital-based study. Of the total of 3,140,941 new patients presenting between October 2010 and March 2022, patients with a clinical diagnosis of corneal hydrops in at least one eye were included in the study. All the data was collected using an electronic medical record system. 1291 eyes of 1110 patients were diagnosed with corneal hydrops and included in the study and 961 patients (83.69%) had a unilateral affliction. Corneal hydrops was noted to be significantly more common in males (62.43%) and adults (62.7%). The most common age group at presentation was during the second decade of life with 472 (42.52%) patients. They were more commonly from the higher socio-economic status (77.3%) and from the urban geography (44.23%). In the 1291 eyes, 567 (43.92%) eyes had a visual impairment of blindness (> 20/400-20/1200) followed by moderate visual impairment (> 20/70-20/200) in 166 (12.86%) eyes. Overall, the most common etiology was keratoconus in 1,082 (83.81%) eyes followed by primary congenital glaucoma (PCG) in 91 (7.05%) eyes. Surgical intervention to hasten the recovery of hydrops was performed in 7.82% of eyes with ectasia and as a definite management in 7.05% eyes with PCG. Visual rehabilitation was with contact lenses in 29.1% eyes and keratoplasty in 13.94% eyes. Corneal hydrops is predominantly unilateral and is more common in males. Keratoconus was the commonest etiological condition; however, the risk of hydrops was highest in keratoglobus, followed by PMD. Most affected age was the second decade of life and visual impairment was severe in majority (60%). A surgical intervention was performed in a third of the cases.

Research on motion control strategy of athlete muscle training based on blockchain and visual image analysis

Muscle training is an important part of athletes’ physical training. Its goal is to keep athletes in high intensity and improve sports performance in physical training. With the continuous improvement of the level of competitive sports, there are still many problems in the training of competitive athletes. The research on the control strategies of some technical movements in the process of athletes’ muscle development would help to improve the efficiency and effect of athletes’ training. By analyzing and quant description of muscle movement control process based on blockchain and visual image processing technology, the muscle movement control rule is discussed and then a complete movement database is constructed. At the same time, combined with the sports experiment method and cognitive behavioral theory, this paper analyzed the exercise load, exercise time allocation, muscle training time allocation methods and the corresponding muscle training strategy selection methods under different muscle states, providing theoretical basis for athletes to conduct muscle strength training scientifically and efficiently. This paper first analyzed the importance of athletes’ muscle training action control. After that, the research was mainly carried out from the following two aspects. The first is to analyze the motion control strategy of athlete muscle training based on blockchain and visual image, and summarize its characteristics. The second is to use electronic imaging technology to analyze the data related to posture control in athletes’ muscle training, and explore the characteristics and changes of muscle posture. At last, this paper put forward relevant algorithms about visual images and conducted experimental research on athletes’ physical indicators and performance under different muscle training according to the research in this paper. It was concluded that the score ratio of athletes’ performance after muscle training action control was 7.39% higher than that of general muscle training. Therefore, it is very important to strengthen the research of movement technology in muscle training and analyze the influence of some training control strategies on the development of athletes’ muscles in training.

Interface analysis of oxide free MoS2 films fabricated by solution process.

We report a solution-based approach for the synthesis of oxidation-free MoS2 films, focusing on interface analysis. Through a sulfurization-free solution process and single-step annealing, the oxidation-free MoS2 film is successfully prepared on Si3N4 surfaces, showing improved uniformity with a surface roughness below 0.5nm and a thickness of 4nm at a precursor solution concentration of 30 mM, annealed between 700 and 800ºC. The MoS2 films exhibit a hexagonal lattice structure with crystallographic orientations of (1 1 0 0) and (1 2 1 0) with lattice spacings of 0.27nm and 0.16nm respectively. Interfacial analysis by X-ray photoelectron spectroscopy (XPS) on SiO2 reveals migration of oxygen species as evidenced by a shift in the Si 2p spectrum at binding energies between 102.6eV and 102.8eV. MoS2 films on Si3N4 show a complex Si 2p peak evolution at binding energies between 100.9 and 101.8eV, providing valuable insights into the synthesis of oxide-free MoS2 films for potential applications in advanced electronic devices.

Strain engineering for the interfacial thermal resistance of few-layer graphene with porous defects

As electronic devices continue to advance toward higher integration, thermal management issues have become a bottleneck, limiting device performance at the nanoscale. In this study, we reveal the bistable structural characteristics of circular hole defects in few-layer graphene, exhibiting both adhered and separated states, through molecular dynamics simulations. We propose a mechanical model that considers the interplay between the bending energy and cohesive energy to determine the critical size of the hole defect, at which the structure transits between the adhered and separated states. We further demonstrate that strain engineering can adjust the interfacial thermal resistance by more than fivefolds, which drives the structure transit between bistable states. The strain effect on the interfacial thermal resistance of the structure can be accurately described using analytical models. These findings illustrate that strain engineering is an effective method for precisely controlling the interfacial thermal resistance in few-layer graphene and provide new insights into possible thermal switch applications.

Magnetic resonance imaging in patients with cardiac implantable electronic devices: the RESONANCE Spanish registry.

Despite increasing evidence demonstrating the safety of magnetic resonance imaging (MRI) in patients with cardiac implantable electronic devices (CIEDs), this procedure is often neglected in this population. This Spanish registry aimed to determine the proportion of MRI referrals and performance among patients with pacemakers (PMs) or implantable cardioverter-defibrillators (ICDs). This prospective, multicenter, open-label registry involved 21 Spanish centers. Data were collected upon implant of PMs or ICDs from BIOTRONIK and one year after, and included the number of MRIs and computed tomography scans prescribed, performed and denied, and reasons for denial. Data from 1105 patients (mean age: 74.2 years) were analyzed and 982 completed the follow-up. Of them, 82.2% had a PM and 17.8% an ICD. A total of 351 imaging tests were prescribed in 220 patients (19.9%), including 52 MRIs in 39 patients (3.5%) and 299 computed tomography scans in 196 patients (17.8%). Among the MRIs, 44 (84.6%) were performed, five (9.6%) were not performed, and three (5.8%) were replaced by an alternative test. Most of the indicated computed tomography scans were performed (97.7%). The proportion of patients with an MRI scan referral was 4.6% during the pre-COVID-19 period and 2.6% during the COVID-19 period. No MRI-related arrhythmic ventricular event was reported. This registry revealed that only 3.5% of patients with CIEDs had an MRI referral over the study, with rates decreasing to 2.6% during the COVID-19 period. These rates contrast with the 85 MRIs conducted per 1000 inhabitants in Spain in 2020.

Molecular Break Junction: A Stage for Redox Transformations

AbstractAn exceptionally brilliant strategy to miniaturize electronic devices is to employ a single‐molecule between two electrodes for carrier conduction at single‐molecule break junctions (SMBJ). To understand the intrinsic mechanisms of operation at these junctions, extremely crucial is to study physical, chemical, and electrochemical properties employing single‐molecules at SMBJs. Further, redox‐based transformations at the nano‐junction could be achieved electrochemically to allow efficient switching between different redox states of a single‐molecule, showcasing the possibility of maneuvering transport properties with on‐off states of the molecule. Herein, are presented the fundamentals of SMBJs, and the electrochemically influenced transformations or switching of organic molecules pursued at SMBJs. Such an understanding of electrochemical phenomena at the nanoscale dimension could bridge the knowledge gap between macroscopic electronic circuits and single‐molecule electronic circuits, whereby the feasibility of switching between the states could maneuver the electronic properties as well as other photophysical parameters.

Development of Literacy and Digital Learning on Students' Learning Motivation at Madrasah Aliyah Negeri 2 Sukabumi

This article aims to determine the development of literacy and digital learning on student learning motivation at Madrasah Aliyah Negeri 2 Sukabumi City. This type of research uses a qualitative method with a qualitative descriptive approach which focuses on collecting data and information from relevant sources using the interview method. Digital literacy is an individual's ability to use digital technology effectively in accessing, streaming, storing, producing and communicating using information online. Digital learning refers to the use of digital technology in the learning process, which involves the use of electronic devices and the internet to access and share knowledge. This article will review students' opinions regarding how the development of digital literacy and learning plays a role in increasing the accessibility, synchronization and effectiveness of learning in the current era. As well as its influence on student learning motivation. This research will also explore how increasing digital literacy and the use of digital learning can influence students' learning motivation, by considering factors such as ease of access to information, comfort in using technology, and the ability to learn more personally and appropriately. for individual needs. Thus, it is hoped that this article can provide insight into the importance of literacy and digital learning in the context of modern education, as well as how these two aspects can support increasing student learning motivation at Madrasah Aliyah Negeri 2 Sukabumi City.

Tunable Rectification in 2D Porphyrinic Metal–Organic Framework Nanosheets Molecular Heterojunctions

AbstractAs functional electrical devices advance, new strategies for regulating electrical properties are essential for achieving diverse electrical performance. In this study, molecular heterojunction rectifiers are constructed by connecting porphyrinic 2D metal–organic framework (2D MOF) nanosheets and oligophenylene thiols self‐assembled monolayers (OPT SAMs) within metal electrodes. The rectification characteristics can be tuned by the molecular length of OPT and the coordinated metal atom in the center of 2D MOFs. Specifically, a rectification ratio of more than 1.67 orders of magnitude is achieved in the heterojunction composed of 2D Zn‐TCPP MOF nanosheet (TCCP, tetrakis(4‐carboxyphenyl) porphyrin) and OPT3 SAM. Combining Kelvin probe force microscopy measurements and first‐principles calculations of the 2D MOF nanosheets, it elucidates that the rectification variations come from the adjustment of energy level alignment at OPT SAMs//2D MOF interface, leading to asymmetric charge transport with the voltage polarities. This strategy can be further extended to Cu‐MOF nanosheets, which also exhibit rectification behaviors when placed on OPT2 SAMs. This work provides a universal and flexible strategy for regulating the electrical behaviors of MOFs without the need for specific design and synthesis, paving the way for the development of MOF‐based functional electronic devices.

2D heterostructures of graphene oxide and MoS2 to improve sensitivity performance of flexible pressure sensor with shell biological structure

Inspired by the multilayer structure of the shellfish, a novel two-dimensional (2D) composite structure consisting of graphene oxide, MoS2 and graphene oxide (G/M/G) was integrated to the flexible pressure sensing. The composite structure was prepared by the vacuum suction filtration in order to imitate the high toughness of shellfish. Based on the strategy of strain engineering, a comprehensive experimental bench capable of meeting different strain conditions was connected to a push–pull meter and an LCR digital bridge, and then a computer was used to record the changes in transducer capacitance when an external load was applied to the meter. Graphene oxide (GO) and G/M/G supercells were constructed, and density functional theory (DFT) simulations of the initial energy band structure under strain-free conditions were carried out to determine the relationship between the band gap, conductivity, capacitance, and sensitivity of the G/M/G structure based on band gap theory, and to easily understand the mechanism of the shellfish heterostructure leading to enhanced sensitivity of the sensors. Using two-point bending and axial tensile tests, a flexible pressure sensing device was designed to realize positive strains in the ranges of 0%–5 % and 5%–50 %. The results show that the sensitivity of both GO and G/M/G capacitive pressure sensors decreased with increased strain, and the sensitivity of the G/M/G sensors was significantly improved by 75%–102 % compared to the GO sensors at the same strain. The parallel-plate capacitor model and crack growth theory well explain the experimental results at small and large strains. Our results provide new concepts for the design of novel flexible sonar with high sensitivity and large strain operating range by a simple vacuum filtration method, which can be extended to the design of other high-performance 2D flexible electronic devices.

An Overview of the R&amp;D of Flywheel Energy Storage Technologies in China

The literature written in Chinese mainly and in English with a small amount is reviewed to obtain the overall status of flywheel energy storage technologies in China. The theoretical exploration of flywheel energy storage (FES) started in the 1980s in China. The experimental FES system and its components, such as the flywheel, motor/generator, bearing, and power electronic devices, were researched around thirty years ago. About twenty organizations devote themselves to the R&amp;D of FES technology, which is developing from theoretical and laboratory research to the stage of engineering demonstration and commercial application. After the research and accumulation in the past 30 years, the initial FES products were developed by some companies around 10 years ago. Today, the overall technical level of China’s flywheel energy storage is no longer lagging behind that of Western advanced countries that started FES R&amp;D in the 1970s. The reported maximum tip speed of the new 2D woven fabric composite flywheel arrived at 900 m/s in the spin test. A steel alloy flywheel with an energy storage capacity of 125 kWh and a composite flywheel with an energy storage capacity of 10 kWh have been successfully developed. Permanent magnet (PM) motors with power of 250–1000 kW were designed, manufactured, and tested in many FES assemblies. The lower loss is carried out through innovative stator and rotor configuration, optimizing magnetic flux and winding arrangement for harmonic magnetic field suppression. Permanent magnetic bearings with high load ability up to 50–100 kN were developed both for a 1000 kW/16.7 kWh flywheel used for the drilling practice application in hybrid power of an oil well drilling rig and for 630 kW/125 kWh flywheels used in the 22 MW flywheel array applied to the flywheel and thermal power joint frequency modulation demonstration project. It is expected that the FES demonstration application power stations with a total cumulative capacity of 300 MW will be built in the next five years.

Effectiveness of Facial Massage and Exercise in Alleviating Visual Fatigue: A Systematic Review

Background: With the widespread use of electronic devices, visual fatigue has become a prevalent issue in modern society. Non-pharmacological interventions, such as facial massage and exercise, have been proposed as effective methods for alleviating visual fatigue. However, the specific effects and mechanisms behind these interventions require further exploration. Objectives: This systematic review aims to evaluate the effectiveness of facial massage and exercise in reducing visual fatigue and to explore the underlying mechanisms of these interventions. Methods: A comprehensive search was conducted across multiple databases, including PubMed, Web of Science, Scopus, and the Cochrane Library. Randomized controlled trials and crossover experiments were included for both quantitative and qualitative analyses of relevant studies. Results: The findings suggest that both facial massage and exercise can reduce visual fatigue. Facial massage alleviates eye strain by stimulating the parasympathetic nervous system, reducing stress and anxiety, relaxing muscles, and improving blood circulation. Exercise alleviates visual fatigue through two mechanisms: (1) enhancing overall blood circulation, reducing stress, improving sleep quality, and overall health; (2) directly exercising eye muscles through eye yoga, which helps relieve visual fatigue. Conclusions: Preliminary research indicates that facial massage, full-body exercise, and eye yoga hold potential as non-pharmacological interventions for visual fatigue. Eye yoga has experimental support for its ability to strengthen eye muscles and improve focus. Massage stimulates parasympathetic activity and boosts blood circulation, while full-body exercise enhances systemic circulation to relieve eye fatigue. Future research should focus on investigating the mechanisms of these interventions in more detail and comparing the effects of various types, intensities, and durations to provide more precise clinical recommendations.

Crack Development and Electrical Degradation in Chromium Thin Films Under Tensile Stress on PET Substrates

The mechanical and electrical deterioration of chromium (Cr) thin films sputtered onto polyethylene terephthalate (PET) substrates under tensile strain was studied. Understanding mechanical and electrical stability due to imposed strain is particularly important for device reliability, as the demand for flexible electronic devices increases. Cr thin films, widely spread across the field of electronic and sensor applications, face crack propagation with electrical degradation with tensile stress that can seriously compromise the performance. Accordingly, this study offers new findings on how Cr film thickness might influence crack formation and electrical resistance differently and also the general guidelines for flexible electronic component design with respect to long-term durability. Electrical resistances were measured while mechanically stretching 100- and 200 nm thin sheets. The study focused on crack development and propagation mechanisms in both film thicknesses and their effects on percentage change in electrical resistance (PCER). Scanning electronic microscopy (SEM) was used to characterize surface morphology and observe cracks as the strain rose. Early crack formation in 100 nm Cr films led to rapid PCER increases due to quick crack propagation and fast electrical degradation. Thicker 200 nm films, however, showed a more gradual PCER rise with fewer but deeper cracks, indicating a regulated strain response. Unlike the sharp PCER spike in 100 nm films, 200 nm samples were more variable, with three out of four showing a slight PCER decrease at the end, hinting at partial crack repair or conductive realignment before full failure. These results underscore the role of layer thickness in managing crack propagation and electrical stability, relevant for flexible electronics and strain sensors. This paper is aligned with the ninth goal of the United Nations Sustainable Development Goals, specifically Target 9.5: Enhance Research and Upgrade Industrial Technologies.

Long-term clinical outcomes of remote monitoring for implantable cardioverter-defibrillators in Singapore.

Remote monitoring (RM) for cardiac implantable electronic devices is on the rise and has been shown to reduce the burden of in-clinic follow-up visits. We aimed to investigate the long-term clinical outcomes of RM versus no RM. This was a prospective, single-centre cohort study of consecutive patients with an implantable cardioverter-defibrillator (ICD) or cardiac resynchronisation therapy-defibrillator (CRT-D) followed up from 2018 to 2023. Patients who received non-ICD devices were excluded. In general, RM was offered to all patients, but uptake depended on patient preference. For data analysis, patients were stratified according to whether RM was used. The primary outcome was all-cause mortality; secondary outcomes were hospitalisation for heart failure and device therapy (shocks and electrical storm). Of 551 patients, 284 (51.5%) received RM and 267 (49.5%) did not. Baseline demographics were similar between the two arms. All-cause mortality was significantly lower in RM versus non-RM patients (hazard ratio [HR] 0.45, 95% confidence interval [CI] 0.33-0.60, P <0.001), as was hospitalisation for heart failure (HR 0.39, 95% CI 0.25-0.59, P <0.001); these remained significant after adjustment for baseline covariates. More patients on RM received appropriate antitachycardia pacing (ATP) (17.6% vs. 10.7%, P = 0.035) and appropriate shocks (24.1% vs. 14.7%, P = 0.017). The incidences of inappropriate ATP, inappropriate shocks and electrical storm were similar. More patients on RM underwent pulse generator change (34.1% vs. 10.1%, P <0.001). Remote monitoring was associated with significantly lower mortality in both ICDs and CRT-Ds and in primary and secondary indications, as well as fewer heart failure hospitalisations. This supports current guidelines recommending the use of RM in all patients with ICD or CRT-D.

Advancements in Nanowire-Based Devices for Neuromorphic Computing: A Review.

Neuromorphic computing, inspired by the highly interconnected and energy-efficient way the human brain processes information, has emerged as a promising technology for post-Moore's law era. This emerging technology can emulate the structures and the functions of the human brain and is expected to overcome the fundamental limitation of the current von Neumann computing architecture. Neuromorphic devices stand out as the key components of future electronic systems, exhibiting potential in shaping the landscape of neuromorphic computing. Especially, nanowire (NW)-based neuromorphic devices, with their advantages of high integration, high-speed computing, and low power consumption, have recently emerged as candidates for neuromorphic computing technology. Here, a critical overview of the current development and relevant research in the field of NW-based neuromorphic devices are provided. Neuromorphic devices based on different NW materials are comprehensively discussed, including Ag NW-based, organic NW-based, metal oxide NW-based, and semiconductor NW-based devices. Finally, as a foresight perspective, the potentials and the challenges of these NW-based neuromorphic devices for use as future brain-like electronics are discussed.

H-BN-assisted-transferred metal contacts to InSe for twodimensional multifunctional electronic devices

Abstract Metal contacts to two-dimensional semiconductors play a crucial role in determining the electrical performance of the electronic devices. However, traditional three-dimensional metal deposition processes will bring damage to two-dimensional semiconductors and cause significant Fermi-level-pinning effects. In this work, we report a hexagonal boron nitride (h-BN)-assisted-transferred method for metal contacts to few-layered InSe for construction of two-dimensional functional electronic devices. Using transferred Pt electrodes as the contact, p-type dominated ambipolar conduction behavior with the hole Schottky barrier height (SBH) approaching 0 meV was observed in field-effect transistors (FETs) based on multilayered InSe. Based on this, using a dual-gate modulating method, multiple types of InSe homojunctions, including p-p, n-n, p-n and n-p junctions, could be constructed. For InSe p-n homojunctions, a current rectification ratio of over 104 and optoelectronic detection capabilities were achieved. Furthermore, a complementary metal-oxide-semiconductor (CMOS) inverter with an ultra-high voltage gain exceeding 60 at VDD = -1 V was constructed. Our h-BN-assistedtransferred metal contact method can be easily extended to other two-dimensional semiconductors for the construction of complementary electronic and optoelectronic devices.

Assessment of Factors Influencing Healthcare Provider’s Acceptance of Electronic Health Record in Jordanian Hospitals

Acceptance of electronic health record systems is considered an essential factor for effective implementation among healthcare providers. In an attempt to understand healthcare providers’ perceptions of electronic health record systems implementation and evaluate the factors influencing healthcare providers’ acceptance of electronic health record systems, the current research examines the effects of individual (user) context factors and organisational context factors using the technology acceptance model. A quantitative cross-sectional survey design was used, in which 319 healthcare providers from five public hospitals participated in the present study. Data were collected using a self-administered questionnaire, which was based on the technology acceptance model. Jordanian healthcare providers demonstrated positive perceptions of the usefulness and ease of use of the electronic health record systems and subsequently accepted the technology. The results indicated that they had a significant effect on the perceived usefulness and perceived ease of use of the electronic health record, which in turn was related to positive attitudes towards the electronic health record systems as well as the intention to use them. User attributes, organisational competency, management support and training and education are essential variables in predicting healthcare providers’ acceptance towards electronic health records. These findings should be considered by healthcare organisations’ administration to introduce an effective system to other healthcare organisations.