Design Of Logic Gates Research Articles

A novel method of high-speed all-optical logic gate based on metalens

This paper introduces a novel approach to constructing all-optical logic gates based on metalens. The designed structure enables the realization of five commonly used logic gates (AND, OR, NOT, XOR, XNOR). Each logic gate is composed of two to three metalenses. The advantages of this approach are as follows: 1. Metalens offer flexible phase control capabilities, overcoming the strict phase requirements in traditional optical logic gate design. 2. The miniaturization of the metalens makes integration possible and provides a potential method for high-speed parallel optical computing. 3. By controlling different types and quantities of metalens, various types of logic gates can be formed, enhancing programmability during use. The contrast values for the designed logic gates are as follows: 27.95 dB (OR), 18.18 dB (AND), 10.83 dB (NOT), 10.29 dB (XNOR), and 13.56 dB (XOR). With similar structures, the bit rates for the five logic gates at a 50% duty cycle range from 1.04 to 1.05 Tb/s. Overall, these results demonstrate a successful balance between contrast and transmission speed when utilizing metalens to realize all-optical logic gates. From the results, the logic gate proposed in this paper has high contrast and transmission speed, which proves the rationality of using metalens to realize all-optical logic gate.

Data encryption/decryption and medical image reconstruction based on a sustainable biomemristor designed logic gate circuit

Memristors are considered one of the most promising new-generation memory technologies due to their high integration density, fast read/write speeds, and ultra-low power consumption. Natural biomaterials have attracted interest in integrated circuits and electronics because of their environmental friendliness, sustainability, low cost, and excellent biocompatibility. In this study, a sustainable biomemristor with Ag/mugwort:PVDF/ITO structure was prepared using spin-coating and magnetron sputtering methods, which exhibited excellent durability, significant resistance switching (RS) behavior and unidirectional conduction properties when three metals were used as top electrode. By studying the conductivity mechanism of the device, a charge conduction model was established by the combination of F-N tunneling, redox, and complexation reaction. Finally, the novel logic gate circuits were constructed using the as-prepared memristor, and further memristor based encryption circuit using 3-8 decoder was innovatively designed, which can realize uniform rule encryption and decryption of medical information for data and medical images. Therefore, this work realizes the integration of memristor with traditional electronic technology and expands the applications of sustainable biomemristors in digital circuits, data encryption, and medical image security.

Design of Ultra-Compact and Multifunctional Optical Logic Gate Based on Sb2Se3-SOI Hybrid Platform.

Optical logic devices are essential functional devices for achieving optical signal processing. In this study, we design an ultra-compact (4.92 × 2.52 μm2) reconfigurable optical logic gate by using inverse design method with DBS algorithm based on Sb2Se3-SOI integrated platform. By selecting different amorphous/crystalline distributions of Sb2Se3 via programmable electrical triggers, the designed structure can switch between OR, XOR, NOT or AND logic gate. This structure works well for all four logic functions in the wavelength range of 1540-1560 nm. Especially at the wavelength of 1550 nm, the Contrast Ratios for XOR, NOT and AND logic gate are 13.77 dB, 11.69 dB and 3.01 dB, respectively, indicating good logical judgment ability of the device. Our design is robust to a certain range of fabrication imperfections. Even if performance weakens due to deviations, improvements can be obtained by rearranging the configurations of Sb2Se3 without reproducing the whole device.

Ultra Low Power Consumption Optoelectronic Logic Operation of CuO/BaTiO3 Heterojunction Photodetector with Tunable Internal Electric Field Based on Poling Effect

AbstractThe study presents a novel self‐powered ultraviolet (UV) photodetector harnessing both polarization fields and photovoltaic effects, enabling the realization of ultra‐low power, reconfigurable optoelectronic logic gates. The approach is demonstrated on a CuO/BaTiO3 heterojunction photodetector. The behavior of the photodetector is augmented by the poling effect, aligning the internal electric field of the BaTiO3 through the application of a robust external electric field, thereby facilitating the implementation of optoelectronic logic gates. In the unpoled state, the “XOR” and “OR” logic gates operated at voltages of 750 and −500 µV, respectively. However, upon poling up state, the “XOR” logic gate exhibits reduced operation voltage, operating at 500 µV, while the “OR” logic gate implements clarity at −500 µV. In the unpoled state the “AND” logic gate does not operate; however, upon poling in the downward direction, it operated at −500 µV. The achievement demonstrates successful ultra‐low‐power logic operations, utilizing voltages in the hundreds of micron scale, under a 310 nm wavelength and a light intensity of 0.52 mW·cm−2. Furthermore, controllable polarization electric fields in BaTiO3 enable the operation of “AND” logic gate in the unpoled state, presenting a promising avenue for future research in optoelectronic logic gate design.

Optimized Logic Gate Design using QCA

Optimized Logic Gate Design using QCA

The construction of peroxidase-like Cu-BDC@FeMo6 for colorimetric detection of H2O2 and dopamine

Artificial mimic enzymes have attracted wide attention for their superior characteristics to natural enzymes in extensive applications of diagnosis and therapy. In this paper, a nanozyme Cu-BDC@FeMo6 was designed and fabricated by embedding polyoxometalate (NH4)3[FeMo6O18(OH)6]·6H2O (FeMo6) into a copper-based metal–organic framework (Cu-BDC). The integration of FeMo6 and Cu MOF based on the synergies of oxidability of FeMo6 and oxygen-driven reversible Cu+/Cu2+ enhanced the peroxidase mimicking activity, which accomplished the sensitive visual monitoring of H2O2 and dopamine (DA). The detection of H2O2 was driven by Cu-BDC@FeMo6 catalyzing the oxidation of TMB with colorimetric evolution to blue, and consecutive monitoring DA via the reverse process of reduction of ox-TMB was further achieved. The limit of detection (LOD) of H2O2 and DA were 10 μM and 2.27 μM, with excellent stability, and outstanding selectivity. The mechanism of the catalysis was further evaluated, and the generation of O2·- played a crucial role in the catalysis for oxidation. The logic gate design was constructed to illustrate the process and application. This work provides a feasible reference for the reasonable design of simulated enzyme in biosensor applications.

Mechanical logic gate design based on multi-stable metamaterial with multi-step deformation

Mechanical metamaterials exhibit remarkable design versatility, enabling a series of unconventional mechanical properties via structural modifications. However, it is worth noting that many existing mechanical metamaterials either possess a singular deformation path or only multi-step deformation paths without reusability. This study proposes a novel multi-step deformation metamaterial that possesses multiple stable configurations. This metamaterial produces a unique two-step deformation mode under displacement loading, where the curved beams of the unit cells undergo snap-through and the vertical beams buckling. The influence of geometrical parameters on the multistability of the structure is thoroughly examined, and a theoretical prediction model for the buckling load is formulated. To validate the accuracy of the model, experimental tests and finite element simulations are conducted on the two-step deformation mode of periodic array of the unit cell. Additionally, a bi-material design approach for the unit cell is further introduced to enhance the specific energy absorption of the structure while reinforce the negative stiffness effect. Leveraging the multistable characteristics of the structure, mechanical logic gates such as AND, OR, NOT and NAND are conceptualized and experimentally validated. Through the implementation of rational designs and combinatorial connections within the logic gate structure, more complex logic operations can be realized.

Design and implementation of the logic gates using electrically doped configurable polarity control double gate tunnel FET

This paper designs and implements the basic logic and universal gates based on the proposed electrically doped, configurable polarity control double gate tunnel FET (ED-CPC-DGTFET). In contrast to the CMOS and MOSFET, the primary concern of the proposed device is to overcome the transistor count needed to design logic gates. A few compact realizations of logic gates have been reported earlier using conventional double-gate TFETs. The main key to designing and implementing logic gates with the proposed structure is controlling the channel’s tunneling barrier height by altering the gate electrode work function. Additionally, abrupt interband tunneling of TFET by varying gate bias makes the device appropriate for implementing logic gates. The proposed device has a dynamic configuration that can change from n-type to p-type DGTFET by varying the bias at PG-1 and PG-2. Since lightly doped TFETs have a low ON-state current therefore, a high-k material (HfO 2 ) is employed in place of SiO 2 on top of the source side to enhance the ON-state current. Using two-dimensional simulations, the device is designed to implement logic gates with gate lengths of 50 nm and silicon body thicknesses of 10 nm (t si ). OR and AND logic gates are implemented using the n-type ED-CPC-DGTFET structure, and universal gates are implemented using the p-type variant of the proposed ED-CPC-DGTFET structure by independently biasing the top and bottom gates against various inputs.

Voltage-controlled cryogenic Boolean logic gates based on ferroelectric SQUID and heater cryotron

The recent progress in quantum computing and space exploration led to a surge in interest in cryogenic electronics. Superconducting devices such as Josephson junction, Josephson field effect transistor, cryotron, and superconducting quantum interference device (SQUID) are traditionally used to build cryogenic logic gates. However, due to the superconducting nature, gate-voltage-based control of these devices is extremely difficult. Even more challenging is to cascade the logic gates because most of these devices require current bias for their operation. Therefore, these devices are not as convenient as the semiconducting transistors to design logic gates. Here, to overcome these challenges, we propose a ferroelectric SQUID (FeSQUID) based voltage-controlled logic gates. FeSQUID exhibits two different critical current levels for two different voltage-switchable polarization states of the ferroelectric. We utilize the polarization-dependent (hence, voltage-controllable) superconducting to resistive switching of FeSQUID to design Boolean logic gates such as Copy, NOT, AND, and OR gates. The operations of these gates are verified using a Verilog-A-based compact model of FeSQUID. Finally, to demonstrate the fanning out capability of FeSQUID-based logic family, we simulate a two-input XOR gate using FeSQUID-based NOT, AND, and OR gates. Together with the ongoing progress on FeSQUID-based non-volatile memory, our designed FeSQUID-based logic family will enable all FeSQUID-based cryogenic computer, ensuring minimum mismatch between logic and memory blocks in terms of speed, power consumption, and fabrication process.

Memristor-Inspired Digital Logic Circuits and Comparison With 90-/180-nm CMOS Technologies

Compact low-power devices with ultrafast processing speed are the fundamental building blocks for the development of the state-of-the-art logic systems and memristor prominently fulfills these demands and plays a major role in digital circuit design. In this work, design, implementation, and performance evaluation of memristor-based logic gates, such as NOT, AND, NAND, OR, NOR, XOR, and XNOR, and combinational logic circuits, such as adder, subtractor, and 2 <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\times$</tex-math> </inline-formula> 1 mux, are presented via SPECTRE in Cadence Virtuoso. Herein, we propose an optimized design of memristor-based logic gates and combinational logic circuits and draw a comparative analysis with the conventional 180-nm complementary metal–oxide–semiconductor (CMOS) technology. The utilized memristor model is thoroughly validated with the experimental results of a high-density Y <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$_{\text{2}}$</tex-math> </inline-formula> O <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$_{\text{3}}$</tex-math> </inline-formula> -based memristive crossbar array (MCA), which shows a significantly low values of coefficient of variabilities in device-to-device (D2D) and cycle-to-cycle (C2C) operation. The area, power, and delay calculated from these combinational circuits are found to be reduced by more than 71.4%, 40%, and 54%, respectively, as compared to the conventional 180-nm CMOS technology. The impact of multiple CMOS technology nodes (90 and 180 nm) on the power consumption at the chip-level logic circuit implementation has also been investigated. The adopted memristor-based design significantly improves the performance of various logic designs, which makes it area and power efficient and enables a major breakthrough in designing various low-power, low-cost, ultrafast, and compact circuits.

Design of all-optical logic gate based on two-dimensional photonic crystal

Design of all-optical logic gate based on two-dimensional photonic crystal

Refined Design of DNA Logic Gate for Implementing DNA-based Three-level Circuit

DNA computing circuits are favored by researchers due to their high density, high parallelism, and biocompatibility. However, compared with electronic circuits, current DNA circuits have significant errors in understanding the...

Multi-Gate In-Plane Actuated NEMS Relays for Effective Complementary Logic Gate Designs

Multi-Gate In-Plane Actuated NEMS Relays for Effective Complementary Logic Gate Designs

Review on Reversible Logic Gates

Abstract: Reversible logic gates have emerged as a pivotal area of research in the field of digital circuit design, offering the promise of ultra-low power consumption. This survey paper comprehensively explores the foundations and practical applications of reversible logic gates. Beginning with an introduction to the fundamental principles of reversibility, it delves into the design of reversible gates, covering CNOT, Feynman, Toffoli, Peres, Fredkin gates, and beyond. The paper offers a systematic review of state-of-the-art research in the field, discussing various optimization techniques and quantum-inspired reversible circuits. It also investigates real-world applications, ranging from low-power VLSI design to quantum computing. By summarizing the key findings, challenges, and potential future directions in reversible logic gate design, this survey paper provides a valuable resource for researchers, engineers, and enthusiasts seeking a comprehensive understanding of this transformative technology

A split-type electrochemical biosensor using enzyme-linked DNA magnetic beads realizes the detection of BCR/ABLp210 fusion gene in clinical samples: Duplex ligation chain reaction coupled with OR logic gate design

Detection of BCR/ABLp210 transcript levels, allowing for the early diagnosis of chronic myelocytic leukemia (CML) and its minimal residual disease (MRD) monitoring, plays a decisive role in the cure of CML. Herein, to realize the sensitive detection of BCR/ABLp210 transcript by electrchemical DNA (E-DNA) sensors in clinical samples, a split-type strategy using enzyme-linked DNA magnetic beads (MBs) was intelligently provided. Specifically, the utilization of magnetic separation makes the target recognition event separate from electrochemical measurements, avoiding the interference of complex matrices on the sensing interface. Besides, the MBs adopted as dispersible electrodes could improve mass transfer of target compared to that of a planarelectrode. Consequently, the proposed E-DNA sensor combined with the ligation chain reaction (LCR) could achieve an exceptional performance with a low detection limit of 1 aM, a broad linear concentration range, and a remarkable specificity with a single-base resolution. Also, K562 cells in up to a 1000-fold excess of NB4 cells could be successfully detected by this E-DNA sensor. Finally, the integration of duplex LCR and OR logic gate into the E-DNA sensor has enabled the detection of e13a2/e14a2/both isoforms of BCR/ABLp210 transcript in a single assay in both newly diagnosed CML patients and those undergoing or having undergone treatment by tyrosine kinase inhibitors. Therefore, this method offers an alternative for the early diagnosis of CML and its MRD monitoring, and holds a huge potential of clinical translation due to its advantage of low cost, ease of miniaturization and generalizability.

Grey Wolf Cuckoo Search Algorithm for Training Feedforward Neural Network and Logic Gates Design

This paper presents a new hybrid Swarm Intelligence (SI) algorithm based on the Cuckoo Search Algorithm (CSA) and Grey Wolf Optimizer (GWO) called the Grey Wolf Cuckoo Search (GWCS) algorithm. The GWCS algorithm extracts and combines CSA and GWO features for efficient optimization. To carry out the comprehensive validation, the developed algorithm is applied to three different scenarios with their counterparts. The first validation is carried out on standard optimization benchmark problems. Further, they are used to train Feedforward Neural Networks and finally applied to design logic gates. The comprehensive results are presented and it is found that the proposed GWCS algorithms perform better compared to the state-of-the-art.

Lysine based dipeptides-molecular rectifiers with very high rectification ratio and their application towards designing logic gates

In this research paper, we have enquired the dipeptides (i.e., smallest peptides) consisting of oppositely charged amino acids namely, Lysine-Aspartic and Lysine-Glutamic, where l-Lysine is positively charged, and both L-Aspartic and L-Glutamic are negatively charged amino acids. The l-Glutamic acid has only one extra CH2 chain as compared with l-Aspartic acid. These two dipeptides are stringed to Au, Ag and Cu electrodes, to form molecular devices. Distinct parameters including conductance, Homo-Lumo gap, dipole moment, current-voltage characteristics are intrigued using NEGF-DFT technique. Au-Lysine-Aspartic-Au offers the negative differential resistance regime with the highest peak-to-valley current ratio of 28.79. Lysine-Aspartic with Cu electrodes and Lysine-Glutamic with Au electrodes offers the highest rectification ratio of 146.96 and 34.31 respectively, as compared with other electrodes. Lysine-Aspartic based dipeptides offer higher rectification ratio as compared with Lysine-Glutamic based dipeptides. Moreover, these two dipeptides offer opposite correlation between dipole moment, coupling strength and switching regimes. The reason behind rectification ratio and negative differential resistance is elaborated using transmission spectra, molecular projected self-Hamiltonian states and transmission pathway. The OR, AND and XOR logic gates are proposed using switching regimes of Au-Lysine-Aspartic-Au. We have also detected the thermal stability of one of the heterostructure using ab initio molecular dynamics simulation.

Amorphous hollow manganese silicate nanosphere oxidase mimic for ultrasensitive and high-reliable colorimetric detection of biothiols.

Metal-based nanozymes with exceptional physicochemical property and intrinsic enzymatic properties have been widely used in industrial, medical, and diagnostic fields. However, low substrate affinity results in unsatisfying catalytic kinetic and instability in complicated conditions, which significantly decreases their sensitivity and reliability. Herein, an amorphous hollow manganese silicate nanosphere (defined as AHMS) has been successfully synthesized via a facile one-step hydrothermal method and utilized in the archetype for colorimetric detection of biothiols with highsensitivity and high reliability. The experimental data demonstrates that ultrafast affinity of thesubstrate contributes to enhanced sensitivity with outstanding catalytic kinetic features(Km = 27.1 μM) and lowlimit of detection (LODGSH = 20 nM). Thedesigned sensor demonstrates a reliable applicabilityfor analysis ofbiological liquids (fetal calf serum and Staphylococcus aureus) and design of visual logic gates. Therefore, AHMS provides a promising strategy for ultrasensitive and high-reliable biosensing.

Genetic Optimization of the Y-Shaped Photonic Crystal NOT Logic Gate

The present paper is devoted to the actual problem of photonic crystal (PhC) logic gate design. The development of components for photonic digital computing systems will provide opportunities for high-efficient information processing. The use of 2D photonic crystals is one of the most promising approaches to designing interference logic gates. Photonic crystal band gap and use of lattice defects are giving opportunities for flexible control of waveguiding light. Interference logic gates of NOT, OR, AND, and XOR types based on the Y-shaped structure are well known. However, known realizations have limited energy efficiency. Earlier, a method for minimizing energy losses at the PhC waveguide bending based on genetic optimization of the PhC waveguide topology was proposed and investigated. In this paper, the genetic algorithm for optimization of the PhC interference logic gate of the NOT type was used. Optimization of the Y-shaped topology allowed for an increase in the energy efficiency of the logic gate to 95%. A description of the developed numerical procedure as well as computer simulation results are presented. The developed procedure includes the possibility of taking into account the limitations of the technology to be used for the realization of a designed 2D PhC structure.

Mechanism of Fluoride Ion Encapsulation by Magnesium Ions in a Bacterial Riboswitch.

Riboswitches sense various ions in bacteria and activate gene expression to synthesize proteins that help maintain ion homeostasis. The crystal structure of the aptamer domain (AD) of the fluoride riboswitch shows that the F- ion is encapsulated by three Mg2+ ions bound to the ligand-binding domain (LBD) located at the core of the AD. The assembly mechanism of this intricate structure is unknown. To this end, we performed computer simulations using coarse-grained and all-atom RNA models to bridge multiple time scales involved in riboswitch folding and ion binding. We show that F- encapsulation by the Mg2+ ions bound to the riboswitch involves multiple sequential steps. Broadly, two Mg2+ ions initially interact with the phosphate groups of the LBD using water-mediated outer-shell coordination and transition to a direct inner-shell interaction through dehydration to strengthen their interaction with the LBD. We propose that the efficient binding mode of the third Mg2+ and F- is that they form a water-mediated ion pair and bind to the LBD simultaneously to minimize the electrostatic repulsion between three Mg2+ bound to the LBD. The tertiary stacking interactions among the LBD nucleobases alone are insufficient to stabilize the alignment of the phosphate groups to facilitate Mg2+ binding. We show that the stability of the whole assembly is an intricate balance of the interactions among the five phosphate groups, three Mg2+, and the encapsulated F- ion aided by the Mg2+ solvated water. These insights are helpful in the rational design of RNA-based ion sensors and fast-switching logic gates.