Density Functional Theory Results Research Articles

Exploring induced smectic phases of hydrogen bond liquid crystals for nonlinear optical applications: Theoretical (DFT) and experimental approach

A new intermolecular hydrogen bond liquid crystal (HBLC) complex has been isolated and characterized. The HBLC complex is synthesized by mixing of non mesogenic (E)-3-(3,4,5-trimethoxyphenyl)prop‑2-enoic acid (3,4,5-Trimethoxycinnamic acid, TMCA) and mesogenic (E)-3-(4-Methoxyphenyl)prop‑2-enoic acid (4-Methoxycinnamic acid, 4MCA). Mesogenic textures and its LC parameters are analyzed using polarizing optical microscope (POM) and differential scanning calorimeter (DSC). The manifestation of cyclic dimer H-bonds between TMCA and 4MCA is confirmed via FTIR spectrum by observing peak at 3593cm−1 (OH) and C = O at 1683cm−1. It is noteworthy to observe that the induced smectic A (Sm A) with batonnets texture (during cooling cycle) at 129.3 °C and smectic G (Sm G) with multi color mosaic texture at 116.5 °C in TMCA+4MCA, while compared to its individuals. To understand the molecular level modifications in the LC phases, with the aid of density functional theory (DFT), the nature (H-bond length, MEP, FMO, QTAIM, etc.,) and strength of intermolecular H-bonds are explored. The NLO parameters of HBLC complex have been discussed. In this present paper, the DFT result is compared with experimental observations and the special significances are studied to identify the potent applications of HBLCs.

Long-Range Effects in Topologically Defective Arm-Chair Graphene Nanoribbons.

The electronic structure of 7/9-AGNR superlattices with up to eight unit cells has been studied by means of state-of-the-art Density Functional Theory (DFT) and also by two model Hamiltonians, the first one including only local interactions (Hubbard model, Hu) while the second one is extended to allow long-range Coulomb interactions (Pariser, Parr and Pople model, PPP). Both are solved within mean field approximation. At this approximation level, our calculations show that 7/9 interfaces are better described by spin non-polarized solutions than by spin-polarized wavefunctions. Consequently, both Hu and PPP Hamiltonians lead to electronic structures characterized by a gap at the Fermi level that diminishes as the size of the system increases. DFT results show similar trends although a detailed analysis of the density of states around the Fermi level shows quantitative differences with both Hu and PPP models. Before improving model Hamiltonians, we interpret the electronic structure obtained by DFT in terms of bands of topological states: topological states localized at the system edges and extended bulk topological states that interact between them due to the long-range Coulomb terms of Hamiltonian. After careful analysis of the interaction among topological states, we find that the discrepancy between ab initio and model Hamiltonians can be resolved considering a screened long-range interaction that is implemented by adding an exponential cutoff to the interaction term of the PPP model. In this way, an adjusted cutoff distance λ=2 allows a good recovery of DFT results. In view of this, we conclude that the correct description of the density of states around the Fermi level (Dirac point) needs the inclusion of long-range interactions well beyond the Hubbard model but not completely unscreened as is the case for the PPP model.

Effect of Fatty Acid Unsaturation on the Intermolecular Weak Interaction at the Low-Rank Coal-Water Interface: Density Functional Theory Calculations and Experimental Study.

The study on the effect of fatty acid saturation on low-rank coal (LRC) flotation is still limited. In this investigation, density functional theory (DFT) combined with Zeta potential and Fourier transform infrared spectroscopy (FTIR) was used to study the mechanism of intermolecular weak interaction at the LRC-water interface of fatty acids (decanoic acid (DA), undecylenic acid (UA), and phenyl propionic acid (PA)) with different saturations and different dodecane (D) composition hydrocarbon oil-fatty acid mixed collectors (D-DA, D-UA, D-PA). The findings demonstrated that the hydrogen bond interaction and electrostatic interaction between the UA/PA with unsaturated bonded carbon chains and the LRC molecular fragments/water molecules were stronger than DA without a saturated bond carbon chain, and UA/PA strengthened its interaction with water molecules on the whole, even PA molecules would preferentially interact with water molecules. The unsaturated bond had a minimal impact on the adsorption of the LRC hydrophobic site, and the strength of the hydrogen bond between the mixed collector and LRC is D-DA > D-UA > D-PA. In the actual flotation process, the strong hydrogen bonding and electrostatic interaction between UA/PA and water molecules weaken the collection performance of the mixed collector D-UA/D-PA for LRC, which also confirmed the research results of DFT, FTIR, and Zeta.

Ultra-efficient decontamination via functionalized reactive electrochemical membrane for peroxymonosulfate activation: High water flux with extremely low energy consumption

A perovskite LaCoO3 functionalized Ti4O7 reactive electrochemical membrane (REM) was developed for electro-enhanced peroxymonosulfate (PMS) activation (E-REM-PMS), addressing limitations in wastewater treatment efficiency, reusability, and interference resistance. It achieved 100% carbamazepine (CBZ) removal at a rate constant of 39.69 min−1, 233 and 23 times of electro-REM (E-REM) system without PMS and REM-PMS system without electricity. In-situ Fourier transform infrared spectroscopy (FTIR) highlighted the promotion of electro-activation on PMS, while density functional theory (DFT) calculations elucidated mechanism differences under three adsorption configurations. 1O2 (2.97×10−9 M), SO4•− (2.09×10−11 M) and •OH (7.36×10−12 M) dominated the E-REM-PMS system, consistent with sequence of reactive species by DFT results. Continuous treatment of pharmaceutical wastewater confirmed 100% CBZ removal and 60%-70% TOC mineralization at ultrahigh water flux (642.86 L/m2·h) with minimal energy consumption (0.01 kWh/m3·order). This work proposed a high-performance and anti-fouling REM, offering an efficient and economical solution for wastewater treatment.

Investigation of hexagonal boron nitride monolayer with pores as an anode material for sodium-ion batteries

The hexagonal boron nitride monolayer (h-BNML) used as an anode material for metal-ion batteries was assumed pristine form. However, inspired by the imperfections in natural materials, this study investigates the effect of defects on the electrochemical properties of h-BNML. Within the current piece of research, h-BNML with pores is introduced to develop an anode material for sodium ion battery (SIBs) by undertaking density-functional theory (DFT) computations. During the diffusion and storage process of Na ions, the pores effect was thoroughly investigated. The boron atoms were removed from the structure of the pure h-BNML in order to form the h-BNML with pores, which mimicked the pore formation. Based on the DFT results, after the pore formation, the h-BNML retained its planarity. Following the introduction of vacancies, significant alterations occurred in the electronic structure characteristics of h-BNML within the pores, facilitating the effective adsorption of Na ions within the pore. The results of quantum theory of atoms in molecules indicated that there were interactions between the pores and Na ions through an electrostatic-type attraction. The h-BNML with pores was capable of retaining a large number of Na ions at its surface without any change in its planar structure. This led to an increase in its theoretical specific capacity, which increased with porosity. Hence, unlike the pure h-BNML, the pore formation improved the diffusion of Na ions. This can be promising to designing highly efficient anodes for SIBs. The methodological approach in this study can be used for tailoring porous BN materials for SIBs.

Effect of metal (Cr, Sr, Ag, Cu) doping on the performance of lead-free RbSnI3 based perovskite solar cells: A theoretical approach

Perovskite solar cells based on lead have witnessed unprecedented growth over the past decade, achieving an impressive power conversion efficiency (PCE) of 26.1%. However, lead toxicity remains a concern for commercialization. In order to resolve the matter, scientists have been investigating alternative materials; in this context, rubidium-based lead-free perovskites like RbSnI3 may be a promising alternative because it has a high optical conductivity and absorption coefficient. Density Functional Theory (DFT)-based first-principles studies are used in this work to examine the effect of metal doping (specifically Cr, Sr, Ag, and Cu) on the optoelectronic and structural characteristics of orthorhombic RbSnI3 perovskite. In addition, we conducted a comprehensive study to investigate the impact of metal doping on the formation energy, structural stability, and HOMO–LUMO energy levels of RbSnI3 perovskite. Introducing transition metal cations (Cr2+, Ag+, and Cu+) at the Rb site results in a flat band in the conduction band region, transforming the RbSnI3’s indirect band gap into a direct one and significantly affecting the optoelectronic properties. The DFT results are then integrated into the Solar Cell Capacitance Simulator (SCAPS-1D) to estimate the effectiveness of the modeled device. The Cu-doped RbSnI3 device exhibits the highest PCE of 20.2%. Furthermore, Ag and Cu doping in RbSnI3 increases bond length, which reduces exciton binding energy and helps with charge carrier generation.

Combined experimental and DFT investigation on photovoltaic performance of low-cost metal-free organic dye-sensitized solar cells

Metal-free organic dyes, viz. eosin yellow (eosin-Y), fluorescein and curcumin were used as sensitizers in zinc oxide (ZnO) nanoparticles thin film photoanode based dye-sensitized solar cell (DSSC) and also investigated by density functional theory (DFT). UV–vis spectrophotometer was employed to determine absorption feature of dyes in solar spectrum, adsorption tendency towards ZnO photoanode surface, molar-extinction coefficient and desorbed dye molecules from the photoanode surface. The photovoltaic performance of metal-free organic DSSCs employing imidazole based liquid electrolyte and platinum counter electrode was evaluated under standard light exposure of 85 mW/cm2. Among the dyes, eosin-Y DSSC delivered overall energy conversion efficiency (η) of 0.95 % with short-circuit photocurrent density (Jsc) of 2.98 mA cm−2, open-circuit photovoltage (Voc) of 0.54 V and fill factor (FF) of 0.50, which was about 20 % and 40 % higher than that of the energy conversion efficiency of DSSCs sensitized with fluorescein and curcumin dyes, respectively. The better photovoltaic performance exhibited by the eosin-Y DSSC is credited to its high molar extinction coefficient, intense light absorption in the solar spectrum and good adsorption on ZnO thin film photoanode surface. The maximum driving force for dye molecules regeneration and electron injection value of eosin-Y dye attached on the surface of ZnO cluster (eosin-Y + ZnO) resulted in higher Voc. The outcomes of this experimental data are in well agreement with DFT results.

Detection of paracetamol by a montmorillonite-modified carbon paste sensor: A study combining MC simulation, DFT computation and electrochemical investigations

This study aims to develop a suitable electrochemical electrode through the incorporation of potassium montmorillonite (MMTK10)clay into the carbon matrix for the direct and sensitive determination of paracetamol (PAR) in pharmaceutical formulations. Electrochemical characterization of the electrodes involves the use of techniques such as cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and differential pulse voltammetry (DPV). The results reveal that the voltammetric response of PAR is linear over a wide concentration range (1.0–15 μM), with a low detection limit of 0.46 μM. Analytically, PAR recovery results were around 94%, indicating that the developed electrode is highly suitable for PAR detection in pharmaceutical formulation. Additionally, density functional theory (DFT) is employed to investigate the reactivity of PAR and explain the interaction process of PAR on the electrode surface at different pH values. A Monte Carlo simulations model is developed to provide a deeper understanding of the adsorption mechanism, particularly to comprehend molecular interactions and preferential orientations of PAR with MMT fractions at the electrode surface. Reduced Density Gradient is calculated and discussed using techniques such as Multiwfn and Visualization of Molecular Dynamics. The developed CPE-MMTK10 sensor provided a simple preparation method, rapid response, high sensitivity, reproducibility, strong selectivity, and extended stability. Moreover, there is a good correlation between most parameters calculated by DFT and experimental results, thereby reinforcing the validity of the theoretical approach in this study.

Ab initio morphology prediction of Pd, Ag, Au, and Pt nanoparticles on (0001) sapphire substrates

We energetically predict the morphology of Pd, Ag, Au, and Pt nanoparticles on (0001) sapphire substrates, using density functional theory (DFT) simulations and the well-known Young–Dupre equation. In all cases, the contact angles exceed 90°, indicating that the nanoparticles are spherical. Notably, Au nanoparticles exhibit a higher contact angle than those of their counterparts. The validity of the proposed abinitio nanoparticle morphology prediction approach based on DFT simulations was assessed in comparison with our previous experimental findings pertaining to the time variation of the full width at half maximum (FWHM) of the resonant peak. Furthermore, the diffusivities of single Pd, Ag, Au, and Pt atoms on the substrate were evaluated by calculating the activation energy, offering insights into the underlying physics governing the timing of FWHM peaks. The analysis confirms a higher diffusivity of Au and Ag compared with Pd and Pt. According to the comparison between DFT and experiment results, although no clear relation is observed between the contact angles and timing of FWHM peaks, the diffusivity of sputtered atoms may influence the timing of FWHM peaks. Thus, timing can help to clarify the nanoparticle size, rather than shape.

Unveiling structural and optical properties of Sn-doped β-Ga2O3: A correlation of experimental and theoretical observations

This work presents the experimental and theoretical insights into the structural and optical properties of tin (Sn)-doped β-Ga2O3. Sn-doped β-Ga2O3 films were fabricated using the low-pressure chemical vapor deposition (LPCVD) method onto the c-plane sapphire substrate. Further, deposited thin films were characterized for their structural and optical properties. XRD pattern depicts the crystalline nature of β-Ga2O3. The energy band gap (Eg) obtained from UV–Vis spectra has been decreased from 4.82 eV to 4.77 eV for as-deposited β-Ga2O3 to Sn-doped β-Ga2O3, respectively. However, an increase in absorbance has been observed in Sn-doped β-Ga2O3 films. Further, the first principle study based on density functional theory (DFT) has been used to comprehend the effect of Sn doping in β-Ga2O3 films. DFT result reveals the expansion of the lattice parameter of intrinsic β-Ga2O3 on the introduction of the Sn atom. Furthermore, a reduction in Eg has been observed upon Sn doping into the β-Ga2O3 structure similar to the experimental results. The reason behind the reduction in the Eg may be due to the Sn-5s energy level at the bottom of the conduction band as revealed in density of state (DOS) investigations. Also, the DOS results of Sn-doped β-Ga2O3 suggest that the atom has tended to form the ionic bond characteristics with the introduction of Sn into the β-Ga2O3, where the free electrons of the Sn-5s orbital state will fill the conduction band and may improve the conductivity. Additionally, optical properties such as reflectance and dielectric loss of function have been investigated. The reflectance and dielectric loss of function result proposed that more energy was absorbed when Sn was introduced to β-Ga2O3. Therefore, our observation suggests that upon Sn doping into β-Ga2O3, optical as well as structural properties were improved and these improved properties may be useful for optoelectronic devices.Novelty statementβ-Ga2O3 is an emerging material for optoelectronic device applications due to its excellent wide energy band gap, high critical electric field strength, high melting point, high Baliga figure of merits (BFOM), and exceptional physical and chemical stability. However, intrinsic β-Ga2O3 suffers from poor mobility and surface defects. Therefore, β-Ga2O3 needs a dopant material to enhance its' structural and optical properties. In this case, Sn doping may improve the optoelectronic properties of β-Ga2O3. Therefore, detailed theoretical and experimental investigations on Sn-doped β-Ga2O3 become necessary to understand inside phenomena. However, lots of experimental and theoretical works have been performed on Sn-doped β-Ga2O3. But, to date, there is no available report related to the correlation of theoretical and experimental data-based studies on Sn-doped β-Ga2O3. In this work, we have explored the structural and optical properties of Sn-doped β-Ga2O3 thin films deposited by the LPCVD method on the c-plane sapphire substrate. Further, the experimental results obtained were correlated with the first principal based DFT results. Our observation suggests that upon Sn doping into β-Ga2O3, optical as well as structural properties were improved and these improved properties may be useful for optoelectronic devices.

Modulating the Electronic States of Pt Nanoparticles on Reducible Metal-Organic Frameworks for Boosting the Oxidation of Volatile Organic Compounds.

The adsorption and activation of pollutant molecules and oxygen play a critical role in the oxidation reaction of volatile organic compounds (VOCs). In this study, superior adsorption and activation ability was achieved by modulating the interaction between Pt nanoparticles (NPs) and UiO-66 (U6) through the spatial position effect. Pt@U6 exhibits excellent activity in toluene, acetone, propane, and aldehyde oxidation reactions. Spectroscopic studies, 16O2/18O2 kinetic isotopic experiments, and density functional theory (DFT) results jointly reveal that the encapsulated Pt NPs of Pt@U6 possess higher electron density and d-band center, which is conducive for the adsorption and dissociation of oxygen. The toluene oxidation reaction and DFT results indicate that Pt@U6 is more favorable to activate the C-H of toluene and the C═C of maleic anhydride, while Pt/U6 with lower electron density and d-band center exhibits a higher oxygen dissociation temperature and higher reactant activation energy barriers. This study provides a deep insight into the architecture-performance relation of Pt-based catalysts for the catalytic oxidation of VOCs.

Oxygen Vacancies Alter Methanol Oxidation Pathways on NiOOH.

A thorough comprehension of the mechanism underlying the methanol oxidation reaction (MOR) on Ni-based catalysts is critical for future electrocatalytic design and development. However, the mechanism of MOR on these materials remains a matter of controversy. Herein, we combine in situ surface-enhanced infrared absorption spectroscopy (SEIRAS) and density functional theory (DFT) calculations to identify the active sites and determine the mechanism of MOR on monometallic Ni-based catalysts in alkaline media. The SEIRAS results show that formate and (bi)carbonate are formed after the commencement of the MOR with potential-dependent relative distributions. These spectroscopic results are in good agreement with the DFT-computed reaction profiles over an oxygen vacancy, suggesting that the MOR mainly proceeds through the formate-involving pathway, in which the early consumption of methanol yields formate as the major product, while increasing potential drives further oxidation of formate to (bi)carbonate. We also find a parallel pathway for the generation of (bi)carbonate at high potentials that bypasses the formation of formate. The two main pathways are thermodynamically more feasible than the one predominantly reported in the literature for MOR on NiOOH that involves CHO and/or CO as key intermediates. These DFT results are supported by spectroscopic evidence showing that no band associated with CHO or CO can be detected by SEIRAS, which is attributed to the nature of the oxygen vacancies as the active sites, suppressing deep dehydrogenation of CH2O to CHO. This work thus shows the promising role of defect engineering in promoting the electrocatalytic MOR activity and selectivity.

The Impact of ortho-substituents on Bonding in Silver(I) and Halogen(I) Complexes of 2-Mono- and 2,6-Disubstituted Pyridines: An In-Depth Experimental and Theoretical Study.

The coordination nature of 2-mono- and 2,6-disubstituted pyridines with electron-withdrawing halogen and electron-donating methyl groups for [N-X-N]+ (X=I, Br) complexations have been studied using 15 N NMR, X-ray crystallography, and Density Functional Theory (DFT) calculations. The 15 N NMR chemical shifts reveal iodine(I) and bromine(I) prefer to form complexes with 2-substituted pyridines and only 2,6-dimethylpyridine. The crystalline halogen(I) complexes of 2-substituted pyridines were characterized by using X-ray diffraction analysis, but 2,6-dihalopyridines were unable to form stable crystalline halogen(I) complexes due to the lower nucleophilicity of the pyridinic nitrogen. In contrast, the halogen(I) complexes of 2,6-dimethylpyridine, which has a more basic nitrogen, are characterized by X-crystallography, which complements the 15 N NMR studies. DFT calculations reveal that the bond energies for iodine(I) complexes vary between -291 and -351 kJ mol-1 and for bromine between -370 and -427 kJ mol-1 . The bond energies of halogen(I) complexes of 2-halopyridines with more nucleophilic nitrogen are 66-76 kJ mol-1 larger than those of analogous 2,6-dihalopyridines with less nucleophilic nitrogen. The experimental and DFT results show that the electronic influence of ortho-halogen substituents on pyridinic nitrogen leads to a completely different preference for the coordination bonding of halogen(I) ions, providing new insights into bonding in halogen(I) chemistry.

Size-dependent reactivity of Rh cationic clusters to reduce NO by CO in the gas phase at high temperatures.

The reactivity of the reduction of NO pre-adsorbed on Rh2-9+ clusters by CO was investigated using a combination of an alternate on-off gas injection method and thermal desorption spectrometry. The reduction of RhnNxOy+ clusters by CO was evaluated by varying the CO concentration at T = 903 K. Among the RhnNxOx+ clusters, the Rh3N2O2+ cluster exhibited the highest reduction activity, whereas the other clusters, Rh2,4-9NxOx+, showed lower reactivity. Density functional theory (DFT) calculations for Rh3+ and Rh6+ revealed that the rate-determining step for NO reduction in the presence of CO was NO bond dissociation through the kinetics analysis using the RRKM theory. The reduction of Rh3N2O2+ is kinetically preferable to that of Rh6N2O2+. The DFT results were in qualitative agreement with the experimental results.

Error of relativistic effective core potentials for closed-shell diatomic molecules of p-block heavy and superheavy elements in DFT and TDDFT calculations.

Pseudopotentials (PP) are extensively used in electronic structure calculations, particularly for molecules containing heavy elements. Parameters in PPs are mainly determined from abinitio results, and errors of such PPs in density functional theory (DFT) calculations have been studied previously. However, PP errors on results with spin-orbit coupling and those in time-dependent DFT (TDDFT) calculations have not been reported previously. In this work, we investigate the error of the small-core energy-consistent Stuttgart/Koln pseudopotentials in DFT and TDDFT calculations with and without spin-orbit coupling. Ground state bond lengths, harmonic frequencies, dissociation energies, and vertical excitation energies for a series of closed-shell diatomic heavy and superheavy p-block molecules are calculated using several popular exchange-correlation functionals. PP errors are estimated by comparing with results using the all-electron Dirac-Coulomb (-Gaunt) Hamiltonian. Our results show that the difference between ground state properties and most excitation energies in scalar-relativistic calculations with the PP and those of all-electron calculations is quite small. This difference becomes somewhat larger when spin-orbit coupling (SOC) is present, especially for properties that are affected by SOC to some extent. In addition, the errors of the PPs are insensitive to the employed exchange-correlation functionals in most cases. Our results indicate that reasonable DFT and TDDFT results can be obtained using the small-core energy-consistent Stuttgart/Koln pseudopotentials for heavy and super-heavy p-block molecules.

Modeling the Atomic Layer Deposition of Metal Thin Films: Studying the Surface Reaction Mechanism By Density Functional Theory Simulations

Atomic layer deposition (ALD) is widely used in microelectronics and semiconductor industry to deposit thin films as part of device fabrication in nano- or subnano-dimensions. The key advantages of ALD are the conformality and precise thickness control at the atomic scale, which are difficult for physical or traditional chemical vapor deposition methods. The atomic scale understanding of ALD is vital and essential to design and optimize the deposition process, where density functional theory (DFT) calculations play an important role in providing detailed reaction mechanism, theoretical screening of suitable precursors and estimated growth-per-cycle (GPC).In this study, we show our recent works on DFT calculations of the growth mechanism study of Cobalt (Co) thin film by plasma-enhanced ALD1,2. We first addressed the surface reaction mechanism at the metal precursor pulse and plasma half-cycle on NHx-terminated Co surfaces, which corresponds to the steady growth for the PE-ALD. The adsorption and reactions of metal precursors (CoCp2) on NHx terminated metal surfaces were investigated with the inclusion of van der Waals corrections. The plausible reaction pathways include: precursor adsorption, hydrogen transfer, CpH formation and CpH desorption. The direct Cp dissociation mechanism is not considered on these NHx-terminated metal surfaces due to experimentally observed minimal C impurities at the deposited metal thin films, which indicates that most of the Cp ligand is removed completely. The barrier for proton transfer was calculated using climbing image nudged elastic band (CI-NEB) method.The reactions at the initial stages on typical H:Si(100) surface are investigated to gain atomic insight on the effect of different substrates on the elimination of Cp ligands. Our work is important to reveal the mechanism and feasibility of atomic layer deposition of metals using N-plasma.In addition, we present our recent works3, 4 on the thermal ALD of Co using reducing agent Zn(DMP)2 and thermal ALD of Fe4Zn9 thin film with diethyl zinc (DEZ). Our DFT results show that by selecting suitable reducing agent, we can control the deposited thin films to be Zn-free high quality Co thin film or desired intermetallic thin film with high Zn content.These DFT results are important to understand the reaction mechanism for ALD and provides new knowledge in depositing the thin films by adjusting the reducing agents.

Advancing sustainability with inverse vulcanization of waste sulfur catalyzed with TiO2

There is a need for sustainable valorization solutions for the problem of excess sulfur arising from abundant natural sources of sulfur and the production of millions of tons of sulfur annually as a byproduct of refineries. Developing sulfur-based polymers with enhanced mechanical properties using the process of inverse vulcanization could be a valuable endeavor, since the poor mechanical properties of current sulfur polymers limit their scale-up and widespread application. Herein, we studied the performance of titanium oxide (TiO2) in improving the mechanical properties of the sulfur polymer through copolymerization with oleic acid. To study the efficacy of TiO2 and oleic acid in copolymerization with sulfur. we used laboratory experiments and a computational approach geared toward the use of the density functional theory (DFT). Based on the DFT results, the coordination of the third and fourth ligands (oleic acid chains) to the Ti4+ ion are not as strong as the coordination of the first two ligands mainly because of the high steric hindrance around the metal ion. The low values of binding energy for Ti2+–di oleate and Ti+–tri oleate make them more accessible to sulfur chains. This in turn, promotes the cross-linking reactions in a process of inverse vulcanization. This was further reflected in an increase of up to 637.3% in sulfur–oleic acid blends in presence of TiO2. This study contributes to the sustainable use of abundant sulfur and the sustainable development of the polymer industry.

Unraveling the sorption mechanisms of ciprofloxacin on the surface of zeolite 4A (001) in aqueous medium by DFT and MC approaches

The adsorption mechanism of ciprofloxacin (CIP) and its ionic form were investigated using density functional theory (DFT) and molecular dynamics (MD), with the goal of forecasting their adsorption behavior in terms of gap energy, global reactivity descriptors, Fukui functions, adsorption energies, and density of state on the surface of zeolite 4A (001). Quantum chemical parameters related to the adsorption process were calculated, as well as the overall reactivity. According to DFT calculations, the zwetterionic form CIP± are the most stable and reactive and have a greater power of electron transfer compared to the other species. Under aqueous conditions, zeolite can adsorb ciprofloxacin (CIP) and its ionic forms, as revealed by molecular dynamics simulation. Ciprofloxacin in the zwitterionic form (CIP±) were more efficiently adsorbed to the surface of zeolite 4A (001) than the cationic (CIP+), anionic (CIP−), and neutral(CIP) forms; through the evaluation of adsorption energy, probability distribution, interaction, and density of state. The results also demonstrated that the compounds studied were adsorbed via the process of chemical bonding, which was confirmed by the negative values of the interaction energy. Furthermore, the negative adsorption energy values suggest a significant adsorption of all compounds, with electrostatic interactions (physisorption), diffusion into the pores, and n-π bonds (chemisorption) on the zeolite surface. The increase in adsorption energies and the proximity of the molecules studied to the zeolite surface indicate the predominance of chemisorption, and the adsorption of ciprofloxacin was found to be an exothermic and spontaneous process. Molecular dynamics (MD) modeling was in agreement with the DFT results.

Development of U-Zr-Xe ternary interatomic potentials appropriate for simulation of defect and Xe behaviors in U-Zr system

U-10Zr metallic fuel (alloys of U with 10 wt% Zr) is considered as a potential candidate for fast reactors due to its excellent performance. However, the fission gas swelling has a significant impact on its properties and prevents it from reaching higher burnup. To gain a deeper understanding of the fission gas swelling mechanism, molecular dynamics simulations based on interatomic potentials are underway to fill the key knowledge gaps. In this work, two modified embedded-atom method (MEAM) potentials are developed for the U-Zr system with Xe, one for α-U-Zr and δ-UZr2, and the other for γ-U-Zr. The parameters of the potentials are determined by fitting the material properties from experiments or density functional theory (DFT) calculations. It is verified that the potentials can reproduce well the lattice constants, elastic constants, point defects, surface energy, and the melting point of U. In addition, the lattice constants, elastic constants, cohesive energy, and point defect formation energy of Zr are in good agreement with the experimental and DFT results. For the alloy system, the typical defect properties of Zr and Xe in U, as well as the formation energy and elastic constant of δ-UZr2 are close to the DFT. The lattice constant, linear thermal expansion, and mixing enthalpy of γ-U-Zr alloy are following the experimental values. The results show that the obtained potentials are suitable for simulating the defect evolution and Xe behaviors in the U-Zr system.

Repurposing of Strychnine as the Potential Inhibitors of Aldo-keto Reductase Family 1 Members B1 and B10: Computational Modeling and Pharmacokinetic Analysis.

AKR1B1 and AKR1B10 are important members of aldo-keto reductase family which plays a significant role in cancer progression by modulating cellular metabolism. These enzymes are involved in various metabolic processes, including the synthesis and metabolism of hormones, detoxification of reactive aldehydes, and the reduction of various endogenous and exogenous compounds. This study aimed to explore the potential of strychnine as an anticancer agent by targeting AKR1B1 and AKR1B10 via drug repurposing approach. To assess the drug-like properties of strychnine, a physiologically based pharmacokinetic (PKPB) model and High Throughput Pharmacokinetics (HTPK) approach were employed. The obtained results fell within the expected range for drug molecules, confirming its suitability for further investigation. Additionally, density functional theory (DFT) studies were conducted to gain insight into the electronic properties contributing to the drug molecule's reactivity. Building upon the promising DFT results, molecular docking analysis using the AutoDock tool was performed to examine the binding interactions between strychnine and the proposed targets, AKR1B1 and AKR1B10. Findings from the molecular docking studies suggested a higher probability of strychnine acting as an inhibitor of AKR1B1 and AKR1B10 with docking scores of - 30.84 and - 29.36kJ/mol respectively. To validate the stability of the protein-ligand complex, Molecular Dynamic Simulation (MDS) studies were conducted, revealing the formation of a stable complex between the enzymes and strychnine. This comprehensive approach sheds light on the potential effectiveness of strychnine as a treatment for breast, lung, liver, and pancreatic cancers, as well as related malignancies. The novel insights gained from the physiologically based pharmacokinetic modeling, density functional theory, molecular docking, and molecular dynamics simulations collectively support the prospect of strychnine as a promising molecule for anticancer therapy. Further investigations are warranted to validate these findings and explore the therapeutic potential of strychnine in preclinical and clinical settings.