Delivery System Research Articles

DEVELOPMENT AND OPTIMIZATION OF A DOLUTEGRAVIR NANOSUSPENSION USING BOX BEHNKEN DESIGN

Objective: This study aimed to develop and optimize a nanosuspension of Dolutegravir, an integrase inhibitor with low aqueous solubility, using the sonoprecipitation technique. The objective was to enhance the drug's solubility and oral bioavailability by preparing nanosuspension. Methods: A box-behnken design was employed to systematically investigate the impact of stabilizer concentration, sonication amplitude, and time on the particle size and polydispersibility of the nanosuspension formulations. Various stabilizers, including Soluplus®, Poloxamer 188, Poly Vinyl Pyrrolidone (PVP) K90, Hydroxy Propyl Methyl Cellulose (HPMC), and Tween 80, were evaluated. Fourier transform infrared spectroscopy confirmed drug-polymer interactions, while differential scanning calorimetry and X-ray diffraction revealed partial amorphization. Scanning electron microscopy confirmed nanoscale particle size and morphology. Results: The optimized formulation (NS6) with 1% Soluplus®, 65 W amplitude, and 10 min sonication exhibited nanoparticles of 75.3 nm with low polydispersity. NS6 demonstrated enhanced drug release compared to the pure drug, attributed to particle size reduction and amorphization. In vitro tests indicated acceptable stability over time and temperature. Conclusion: The application of Box-Behnken design resulted in an optimized nanosuspension formulation capable of improving the oral bioavailability of poorly soluble Dolutegravir. The formulation exhibited favorable characteristics, including reduced particle size, amorphization, and enhanced drug release, highlighting its potential as an effective delivery system for Dolutegravir in Human Immuno Deficiency Virus (HIV) treatment.

Fractional Analysis of Magnetohydrodynamics Maxwell Flow Over an Inclined Plate with the Effect of Thermal Radiation

This current study provides a comprehensive examination of a novel method for studying the dynamics of a fractionalized Maxwell flow near an inclined plate, considering non-uniform mass transfer through a permeable media. Through the use of partial differential equations, incorporating heat and mass movement effects, the study employs a combination of generalized Fick’s and Fourier’s law with the Caputo operator. Transforming the fractionalized model into dimensionless form using appropriate dimensionless values, semi-analytical solutions for the non-dimensional transmitted fractional model are obtained via the Laplace transformation method. Through graphical analysis, the precise contributions of key parameters such as heat generation, radiation, and chemical reactions are elucidated, including their impacts on the calculated heat generation parameter (Qo), radiation parameter (Nr), and others. The study’s significance lies in its implications for the design of efficient heat exchangers, fluid flow systems, and cooling components in complex engineering systems, including nuclear reactors and power generation plants. Furthermore, the fractional derivative approach offers a more accurate representation of the viscoelastic behavior of materials like polymers, crucial for optimizing fabrication processes such as extrusion and molding. The insights gained from this study extend to the realm of miniaturized fluidic devices, including bio-analysis tools, lab-on-a-chip technology, and microfluidic drug delivery systems, where improved performance and control need a grasp of Maxwell fluid dynamics. The physical outcome of this research lays the groundwork for future investigations that will maximize heat transfer efficiency in real-world systems and give insightful information on the behavior of complicated fluids. We compute and display the skin friction, mass and heat transfer rate in tabular form.

DEVELOPMENT AND OPTIMIZATION OF RABEPRAZOLE CHRONO-MODULATED DRUG DELIVERY SYSTEMS

Objective: Development and optimization of chrono-modulated pulsatile drug delivery systems (CPDDS) loaded with Rabeprazole for treating nocturnal acid breakthrough in ulcer patients was set as the major objective of this work. Methods: CPDDS were developed to provide drug release as two pulses with predetermined gap. Separate microparticles for delayed instant release (DIR) and delayed extended-release (DER) were formulated. Through the optimization of several formulation and process parameters, ER microparticles were created as matrix microspheres. Central composite design was used to understand how the factors affected the responses. The optimized ER microspheres and plain drug were separately subjected to enteric coating to obtain DER and DIR portion microparticles, respectively. Results: With the exception of stirring speed's impact on drug release, every other factor was found to have a significant influence (p<0.05) on every response. The mechanism underlying the Rabeprazole's delayed prolonged release was explained by the SEM images. The microspheres made with Eudragit RSPO at 0.72 g and polyethylene oxide at 0.5 g for 1 g of Rabeprazole at 400 rpm were shown to be the optimal formulation based on the graphical optimization results. After being coated with a terminal enteric coating, this formulation showed delayed release for a duration of 6 h. Conclusion: After oral administration of equal doses of DIR microcapsules along with the optimized DER microspheres could release Rabeprazole effectively as two different pulses at the desired time intervals.

3D Printing of Succulent‐Inspired Microneedle Array for Enhanced Tissue Adhesion and Controllable Drug Release

AbstractControllable and long‐term release remains a great challenge in current drug delivery systems. Benefiting from their efficient drug loading and painless administration, microneedles (MNs) have emerged as a promising platform for transdermal drug delivery, while they often fail to achieve long‐term tissue adhesion and controllable extended drug release. Here, 3D printing of an innovative MN patch is presented with succulent‐inspired responsive microstructures and light‐controllable long‐term release capability. The MN exhibits a reversible shrink‐swell volume change behavior in response to surrounding humidity, which enables sufficient mechanical strength for skin penetration under the shrinkage conditions and efficient long‐term adhesion when swollen in skin tissues. Moreover, the MN patch introduces a controllable long‐term drug release system, achieved through the integration of thiolated heparin (Hep‐SH) for sustained growth factor release and graphene oxide (GO) nanosheets for controlled drug release via near infrared (NIR) laser irradiation. The MN patches with growth factor loading have good biocompatibility and can promote the proliferation, migration, and proangiogenesis of endothelial cells is further demonstrated. Thus, it is believed that such flexible MN patches can be promising candidates for controllable long‐term transdermal drug delivery as well as other related tissue engineering applications.

Advancements in Aptamer-Driven DNA Nanostructures for Precision Drug Delivery.

DNA nanostructures exhibit versatile geometries and possess sophisticated capabilities not found in other nanomaterials. They serve as customizable nanoplatforms for orchestrating the spatial arrangement of molecular components, such as biomolecules, antibodies, or synthetic nanomaterials. This is achieved by incorporating oligonucleotides into the design of the nanostructure. In the realm of drug delivery to cancer cells, there is a growing interest in active targeting assays to enhance efficacy and selectivity. The active targeting approach involves a "key-lock" mechanism where the carrier, through its ligand, recognizes specific receptors on tumor cells, facilitating the release of drugs. Various DNA nanostructures, including DNA origami, Tetrahedral, nanoflower, cruciform, nanostar, nanocentipede, and nanococklebur, can traverse the lipid layer of the cell membrane, allowing cargo delivery to the nucleus. Aptamers, easily formed in vitro, are recognized for their targeted delivery capabilities due to their high selectivity for specific targets and low immunogenicity. This review provides a comprehensive overview of recent advancements in the formation and modification of aptamer-modified DNA nanostructures within drug delivery systems.

In Vivo Delivery of Spherical and Cylindrical In Vitro Reconstituted Virus-like Particles Containing the Same Self-Amplifying mRNA.

The dramatic effectiveness of recent mRNA (mRNA)-based COVID vaccines delivered in lipid nanoparticles has highlighted the promise of mRNA therapeutics in general. In this report, we extend our earlier work on self-amplifying mRNAs delivered in spherical in vitro reconstituted virus-like particles (VLPs), and on drug delivery using cylindrical virus particles. In particular, we carry out separate in vitro assemblies of a self-amplifying mRNA gene in two different virus-like particles: one spherical, formed with the capsid protein of cowpea chlorotic mottle virus (CCMV), and the other cylindrical, formed from the capsid protein of tobacco mosaic virus (TMV). The mRNA gene is rendered self-amplifying by genetically fusing it to the RNA-dependent RNA polymerase (RdRp) of Nodamura virus, and the relative efficacies of cell uptake and downstream protein expression resulting from their CCMV- and TMV-packaged forms are compared directly. This comparison is carried out by their transfections into cells in culture: expressions of two self-amplifying genes, enhanced yellow fluorescent protein (EYFP) and Renilla luciferase (Luc), packaged alternately in CCMV and TMV VLPs, are quantified by fluorescence and chemiluminescence levels, respectively, and relative numbers of the delivered mRNAs are measured by quantitative real-time PCR. The cellular uptake of both forms of these VLPs is further confirmed by confocal microscopy of transfected cells. Finally, VLP-mediated delivery of the self-amplifying-mRNA in mice following footpad injection is shown by in vivo fluorescence imaging to result in robust expression of EYFP in the draining lymph nodes, suggesting the potential of these plant virus-like particles as a promising mRNA gene and vaccine delivery modality. These results establish that both CCMV and TMV VLPs can deliver their in vitro packaged mRNA genes to immune cells and that their self-amplifying forms significantly enhance in situ expression. Choice of one VLP (CCMV or TMV) over the other will depend on which geometry of nucleocapsid is self-assembled more efficiently for a given length and sequence of RNA, and suggests that these plant VLP gene delivery systems will prove useful in a wide variety of medical applications, both preventive and therapeutic.

Trackable Liposomes for In Vivo Delivery Tracing toward Personalized Medicine Care under NIR Light on Skin Tumor.

We report an near-infrared (NIR)-trackable and therapeutic liposome with skin tumor specificity. Liposomes with a hydrodynamic diameter of ∼20 nm are tracked under the vein visualization imaging system in the presence of loaded paclitaxel and NIR-active agents. The ability to track liposome nanocarriers is recorded on the tissue-mimicking phantom model and in vivo mouse veins after intravenous administration. The trackable liposome delivery provides in vitro and in vivo photothermal heat (∼40 °C) for NIR-light-triggered area-specific chemotherapeutic release. This approach can be linked with a real-time vein-imaging system to track and apply area-specific local heat, which hitchhikes liposomes from the vein and finally releases them at the tumor site. We conducted studies on mice skin tumors that indicated the disappearance of tumors visibly and histologically (H&E stains). The ability of nanocarriers to monitor after administration is crucial for improving the effectiveness and specificity of cancer therapy, which could be achieved in the trackable delivery system.

Alternative Approaches for the Treatment of Chagas Disease

AbstractChagas disease (CD), or American trypanosomiasis, caused by the parasitic protozoa Trypanosoma cruzi, is a substantial global health burden. This comprehensive review explored the multifaceted landscape of CD treatment, providing a historical perspective on the development and discontinuation of benznidazole (BNZ) and nifurtimox (NF), the primary medications. Efforts towards a pediatric version of BZN in Brazil address demographic‐specific treatments, while concerns over drug resistance prompt the exploration of alternative medications like Amiodarone, Allopurinol, Posaconazole, Ravuconazole, and Fexinidazole, which were clinically tested as antichagasic drugs. In recent years, some of the synthesized derivative (1,3‐thiazoles, 4‐thiazolidinones, 2‐styrylquinolines, imidazole‐containing nitrophthalazine, and some others) were found to better activity as compared to standard drug. Traditional herbal alternatives (Resveratrol, curcumin, 1,8‐cineole, β‐pinene, and some others) rooted in traditional practices show promise, with various plant extracts exhibiting anti‐parasitic properties. The frontier of nanomedicine unfolds with studies on solid nanomedicines, PLA‐nanoparticles, ZIF‐8, BNZ carriers, and PLGA nanoparticles, showcasing improved drug delivery systems and controlled release mechanisms. The absence of a definitive vaccine accentuates ongoing research in recombinant antigens, peptide‐based vaccines, and nanoparticle formulations, with notable candidates like TcG1, TcG2, TcG4, MASPpep‐KLH, adenovirus vectors, Tc24 protein, and integrin activators. A novel strategy combining a recombinant protein vaccine with low dose BZN treatment presents promising results in a mouse model, emphasizing the urgency for further research and potential advancements in CD therapeutics.

Designing of a new transdermal antibiotic delivery polymeric membrane modified by functionalized SBA-15 mesoporous filler

A new drug delivery system using an asymmetric polyethersulfone (PES) membrane modified by SBA-15 and glutamine-modified SBA-15 (SBA-Q) was prepared in this study by the aim of azithromycin delivery enhancement in both in vitro and ex vivo experiments. The research focused on optimizing membrane performance by adjusting critical parameters including drug concentration, membrane thickness, modifier percentage, polymer percentage, and pore maker percentage. To characterize the fabricated membranes, various techniques were employed, including scanning electron microscopy, water contact angle, and tensile strength assessments. Following optimization, membrane composition of 17% PES, 2% polyvinylpyrrolidone, 1% SBA-15, and 0.5% SBA-Q emerged as the most effective. The optimized membranes demonstrated a substantial increase in drug release (906 mg/L) compared to the unmodified membrane (440 mg/L). The unique membrane structure, with a dense top layer facilitating sustained drug release and a porous sub-layer acting as a drug reservoir, contributed to this improvement. Biocompatibility assessments, antibacterial activity analysis, blood compatibility tests, and post-diffusion tissue integrity evaluations confirmed the promising biocompatibility of the optimized membranes. Moreover, long-term performance evaluations involving ten repeated usages underscored the reusability of the optimized membrane, highlighting its potential for sustained and reliable drug delivery applications.

Targeting pentamidine towards CD44-overexpressing cells using hyaluronated lipid-polymer hybrid nanoparticles.

Biodegradable nanocarriers possess enormous potential for use as drug delivery systems that can accomplish controlled and targeted drug release, and a wide range of nanosystems have been reported for the treatment and/or diagnosis of various diseases and disorders. Of the various nanocarriers currently available, liposomes and polymer nanoparticles have been extensively studied and some formulations have already reached the market. However, a combination of properties to create a single hybrid system can give these carriers significant advantages, such as improvement in encapsulation efficacy, higher stability, and active targeting towards specific cells or tissues, over lipid or polymer-based platforms. To this aim, this work presents the formulation of poly(lactic-co-glycolic) acid (PLGA) nanoparticles in the presence of a hyaluronic acid (HA)-phospholipid conjugate (HA-DPPE), which was used to anchor HA onto the nanoparticle surface and therefore create an actively targeted hybrid nanosystem. Furthermore, ionic interactions have been proposed for drug encapsulation, leading us to select the free base form of pentamidine (PTM-B) as the model drug. We herein report the preparation of hybrid nanocarriers that were loaded via ion-pairing between the negatively charged PLGA and HA and the positively charged PTM-B, demonstrating an improved loading capacity compared to PLGA-based nanoparticles. The nanocarriers displayed a size of below 150nm, a negative zeta potential of -35mV, a core-shell internal arrangement and high encapsulation efficiency (90%). Finally, the ability to be taken up and exert preferential and receptor-mediated cytotoxicity on cancer cells that overexpress the HA specific receptor (CD44) has been evaluated. Competition assays supported the hypothesis that PLGA/HA-DPPE nanoparticles deliver their cargo within cells in a CD44-dependent manner.

Development and comparison of machine learning models for in-vitro drug permeation prediction from microneedle patch

The field of machine learning (ML) is advancing to a larger extent and finding its applications across numerous fields. ML has the potential to optimize the development process of microneedle patch by predicting the drug release pattern prior to its fabrication and production. The early predictions could not only assist the in-vitro and in-vivo experimentation of drug release but also conserve materials, reduce cost, and save time. In this work, we have used a dataset gleaned from the literature to train and evaluate different ML models, such as stacking regressor, artificial neural network (ANN) model, and voting regressor model. In this study, models were developed to improve prediction accuracy of the in-vitro drug release amount from the hydrogel-type microneedle patch and the in-vitro drug permeation amount through the micropores created by solid microneedles on the skin. We compared the performance of these models using various metrics, including R-squared score (R2 score), root mean squared error (RMSE), and mean absolute error (MAE). Voting regressor model performed better with drug permeation percentage as an outcome feature having RMSE value of 3.24. In comparison, stacking regressor have a RMSE value of 16.54, and ANN model has shown a RMSE value of 14. The value of permeation amount calculated from the predicted percentage is found to be more accurate with RMSE of 654.94 than direct amount prediction, having a RMSE of 669.69. All our models have performed far better than the previously developed model before this research, which had a RMSE of 4447.23. We then optimized voting regressor model’s hyperparameter and cross validated its performance. Furthermore, it was deployed in a webapp using Flask framework, showing a way to develop an application to allow other users to easily predict drug permeation amount from the microneedle patch at a particular time period. This project demonstrates the potential of ML to facilitate the development of microneedle patch and other drug delivery systems.

Influence of structural variations in polysarcosine functionalized lipids on lipid nanoparticle‐mediated mRNA delivery

AbstractLipid nanoparticles (LNPs) have been demonstrated to be potent and well‐tolerated vehicles for delivering mRNA in vaccination and therapeutics. However, the presence of anti‐poly(ethylene glycol) (PEG) antibodies in the body resulted in the problems of hypersensitivity reaction, accelerated blood clearance and high systemic reactogenicity after repeated dosing of PEG lipid‐contained LNPs, thus limiting the utility for in vivo messenger RNA (mRNA) delivery. Here, we synthesized well‐defined polysarcosine functionalized lipids (pSar‐lipids) with various hydrophobic tail lengths and molecular weights by the accelerated ring‐opening polymerization of sarcosine N‐carboxyanhydride (NCA). The obtained pSar‐lipids were utilized as PEG lipid alternatives to explore structure–activity relationships of pSar‐lipid‐based LNPs. The results demonstrated that pSar‐lipid‐based LNPs by intravenous administration represented higher mRNA delivery efficiency in the liver and spleen with the increased hydrophobic tail length of pSar‐lipids. Importantly, more significant preference for mRNA delivery into the liver was identified by increasing the molecular weight of pSar segments. As a result, this work elucidated the effect of structural variations in pSar‐lipids on LNP‐mediated in vivo mRNA delivery, providing clues to optimize pSar‐lipids as potential alternatives to PEG lipids for developing next‐generation of LNP delivery systems.

Stimuli-Responsive Dendrimers as Nanoscale Vectors in Drug and Gene Delivery Systems: A Review Study

Stimuli-Responsive Dendrimers as Nanoscale Vectors in Drug and Gene Delivery Systems: A Review Study

Advancing Novel Strategies against Post-surgical Tendon Adhesion Bands, Exploring New Frontiers.

Current interest in adhesion formation stems from its global impact on the function and quality of life, spanning a spectrum of subtle impairments to significant disabilities, based on the affected area and the extent of adhesion. Yet therapeutic agents are restricted to prophylactic anti-inflammatories, revision surgeries, and biological and physical techniques, none of which grant a decent outcome. Recent advancements in tissue- engineered biomaterials, drug delivery systems, and fabricating technologies such as nanoparticles, hydrogels, and weaving or braiding demonstrate potential for improved outcomes. However, none of the mentioned methods have reliable outcomes, thus this study aims to elucidate the mechanisms involved in the pathophysiology of tendon adhesion and post-surgical adhesion band formation (PSAB), with a closer look at inflammatory pathways stimulating the process. This article consolidates information on diverse therapeutic and prophylactic methods and cutting-edge technologies, aiming to provide a comprehensive update on this topic, and providing researchers an avenue for new and innovative ideas for further investigations.

A Macrophage Membrane-Functionalized, Reactive Oxygen Species-Activatable Nanoprodrug to Alleviate Inflammation and Improve the Lipid Metabolism for Atherosclerosis Management.

Atherosclerosis (AS) management typically relies on therapeutic drug interventions, but these strategies typically have drawbacks, including poor site specificity, high systemic intake, and undesired side effects. The field of cell membrane camouflaged biomimetic nanomedicine offers the potential to address these challenges thanks to its ability to mimic the natural properties of cell membranes that enable enhanced biocompatibility, prolonged blood circulation, targeted drug delivery, and evasion of immune recognition, ultimately leading to improved therapeutic outcomes and reduced side effects. In this study, a novel biomimetic approach is developed to construct the M1 macrophage membrane-coated nanoprodrug (MM@CD-PBA-RVT) for AS management. The advanced MM@CD-PBA-RVT nanotherapeutics are proved to be effective in inhibiting macrophage phagocytosis and facilitating the cargo delivery to the activated endothelial cells of AS lesion both in vitro and in vivo. Over the 30-day period of nanotherapy, MM@CD-PBA-RVT is capable of significantly inhibiting the progression of AS, while also maintaining a favorable safety profile. In conclusion, the biomimetic MM@CD-PBA-RVT shows promise as feasible drug delivery systems for safe and effective anti-AS applications.

Cell-Membrane-Coated Metal–Organic Framework Nanocarrier Combining Chemodynamic Therapy for the Inhibition of Hepatocellular Carcinoma Proliferation

Chemodynamic therapy (CDT) employs hydrogen peroxide (H2O2) within the tumor microenvironment (TME) to initiate the Fenton reaction and catalyze the generation of hydroxyl radicals (·OH) for targeted therapy. Metal ion-based nanomaterials have garnered significant attention as catalysts due to their potent anti-tumor effects. Hypoxia in the TME is often associated with cancer cell development and metastasis, with HIF-1α being a pivotal factor in hypoxia adaptation. In this study, an organic framework called MIL-101 (Fe) was designed and synthesized to facilitate H2O2-induced ·OH production while also serving as a carrier for the HIF-1α inhibitor Acriflavine (ACF). A biomimetic nanomedical drug delivery system named MIL-101/ACF@CCM was constructed by encapsulating liver cancer cell membranes onto the framework. This delivery system utilized the homologous targeting of tumor cell membranes to transport ACF, inhibiting HIF-1α expression, alleviating tumor hypoxia, and catalyzing ·OH production for effective tumor eradication. Both in vivo and in vitro experiments confirmed that combining ACF with chemotherapy achieved remarkable tumor inhibition by enhancing ROS production and suppressing HIF-1α expression.

Enhanced efficacy of brucine dissolving-microneedles as a targeted delivery system in rheumatoid arthritis treatment: a comprehensive pharmacokinetic-pharmacodynamic analysis.

Our previous studies have shown the therapeutic efficacy of brucine dissolving-microneedles (Bru-DMNs) in treating rheumatoid arthritis (RA). Bru delivered via the DMNs can bypass some of the issues related to oral and systemic delivery, including extensive enzymatic activity, liver metabolism and in the case of systemic delivery via hypodermic needles, pain resulting from injections and needle stick injury. However, the underlying mechanism of Bru-DMNs against RA has not been investigated in depth at the pharmacokinetic-pharmacodynamic (PK-PD) level. In this study, a microdialysis-based method combined with ultra-performance liquid chromatography-tandem mass spectrometry was developed for the simultaneous and continuous sampling and quantitative analysis of blood and joint cavities in fully awake RA rats. The acquired data were analyzed by the PK-PD analysis method. Bru delivered via microneedles showed enhanced distribution and prolonged retention in the joint cavity compared to its administration in blood. The correlation between the effect of Bru and its concentration at the action site was indirect. In this study, we explored the mechanism of Bru-DMNs against RA and established a visualization method to express the PK-PD relationship of Bru-DMNs against RA. This study provides insights into the mechanism of action of drugs with potential side effects administered transdermally for RA treatment.

Novel in silico nano-drug design and delivery systems employing the density functional theory: a review

Novel in silico nano-drug design and delivery systems employing the density functional theory: a review

Comparative evaluation of pharmacokinetic parameters between a pure nisoldipine suspension and a nisoldipine-loaded bilosome suspension

Bilosomes are nanocarriers that contain bile salts in their vesicular bilayer, thereby enhancing their flexibility and durability in the gastrointestinal tract. Unlike conventional vesicular systems they provide distinct advantages such as streamlined manufacturing procedures, cost efficiency, and improved stability. The main objective of this study was to attain a comparison of the pharmacokinetic parameters of nisoldipine (NSD) after administering an ordinary NSD suspension and an NSD-loaded bilosome suspension. The study used 60 Swiss albino rats weighing 200±15 g and divided into two groups (n=30 each). A dose of 2.2 mg/kg of NSD was administered from the ordinary NSD suspension to the rats of the first group and the same dose of NSD-loaded bilosome suspension was administered to the rats of the second group. NSD levels were determined in the rat plasma by using high-performance liquid chromatography. Our results showed that the Cmax, the Tmax, and the AUC0-36 were 51.47±0.94 ng/mL, 2±0.3 h, and 323.33±21 ng×h/mL for the pure suspension, and 116.41±1.22 ng/mL, 4±0.7 h, and 916±64.09 ng×h/mL for the bilosome suspension, respectively. The maximum concentration was significantly different between the pure and the bilosomal preparation (P<0.05), while the relative bioavailability of the pure suspension was 2.9 times that of the bilosomal suspension, 36 h after a single-dose NSD administration. In conclusion, the prepared bilosomal suspension enhanced the bioavaila¬bility of NSD, and could be considered as a vital delivery system.

Preparation and characterization of nanoparticles loaded with dimethyl fumarate for the treatment of multiple sclerosis

When nanotechnology is used in medicine, it makes it easier to find and treat a wide range of diseases. One of the oral options for treating multiple sclerosis (MS) is dimethyl fumarate (DMF). DMF has been shown to be effective in lowering inflammatory diseases; nevertheless, it is characterized by several undesirable side effects that reduce pa¬tient compliance and add financial obstacles. The aim of this study was to use platelet membranes and platelet na¬noparticles to generate a drug delivery system that works like a cell, so as to treat MS. During the experiments, there is a chance that the DMF solution might harden at room temperature. Therefore, in order to produce solid lipid nano¬particles (SLNs), DMF was combined with biocompatible lipids. The creation of SLNs involved the use of hot emulsion and ultrasonication. These DMF-SLNs were characterized by means of scanning electron microscopy, and Fourier-transform infrared spectroscopy. The herein demonstrated enhanced qualities of the devised SLNs suggest that the formulation may be a potential, longer-acting formulation for the improved management of MS. SLNs could change the way many illnesses are treated in a big way, if they are used for the delivery of medicines.