Data Aggregation Scheme Research Articles

Lightweight verifiable privacy-preserving infectious disease surveillance data aggregation scheme with fault tolerance

Lightweight verifiable privacy-preserving infectious disease surveillance data aggregation scheme with fault tolerance

Data Aggregation Scheme Using Differential Evolution with Sailfish Optimization for Clustering and Routing in IoT

Data Aggregation Scheme Using Differential Evolution with Sailfish Optimization for Clustering and Routing in IoT

A secure and efficient data aggregation scheme for cloud–edge collaborative smart meters

Smart meters are part of the Advanced Measurement Infrastructure (AMI) system in the smart grid. It facilitates data transfer between consumers and electricity suppliers (ES). However, the mass deployment of smart meters (SM) brings heavy overhead to grid operation and poses serious privacy threats. To this end, this paper proposes a secure and efficient data aggregation scheme of cloud–edge collaboration smart meters. At first, we standardize the users’ historical electricity load features and use the improved K-Means clustering algorithm to calculate the Euclidean distance between feature vectors to obtain the classification results of users’ load features. On this basis, ES generates relevant parameters to encrypt meter data and protect users’ data privacy based on classification results. The aggregator (Ag) performs the data aggregation, generates the overall signature using the Schnorr aggregation signature method, and sends it to the cloud server (CS). The ES queries the CS to obtain data and parses it to realize the customer billing service. Meanwhile, this paper executes a series of experiments, and the results show that the proposed scheme exhibits significant advantages in privacy protection and system operation efficiency.

A Short term Electricity Load Forecasting for Community Residents Based on Federated Learning and Considering Privacy Protection

INTRODUCTION: As the penetration rate of renewable energy increases and patterns of energy demand evolve, fluctuations on both the supply and demand sides of electricity are becoming more pronounced. Consequently, accurate forecasting of community residential electrical loads has become crucial. OBJECTIVES: Although the widespread adoption of smart meters among residents provides abundant data for model training, strict challenges arise during the training process due to the need for privacy protection and data security. METHODS: This paper proposes a privacy-preserving community residential short-term electric load forecasting method based on federated learning. Initially, the method applies shared random masking encryption to the sensitive data of community residents, ensuring data privacy while maintaining consistency with the original data after preprocessing. Subsequently, a private data aggregation scheme is established to perform dynamic clustering of the community’s electrical load. RESULTS: The clustered model then serves as the basis for establishing individual load forecasting models for each category of community residents to predict short-term electrical loads. Finally, an empirical analysis is performed using the electrical load data from 120 households across 6 communities in a city in Southern China. CONCLUSION: The analysis demonstrates that the proposed method can achieve the prediction of community residential electrical loads without sharing residents’ data, thus verifying the effectiveness of this approach.

Improved Scheme for Data Aggregation of Distributed Oracle for Intelligent Internet of Things.

Oracle is a data supply mechanism that provides real-world data for blockchain. It serves as a bridge between blockchain and the IoT world, playing a crucial role in solving problems such as data sharing and device management in the IoT field. The main challenge at this stage is determining how to achieve data privacy protection in distributed Oracle machines to safeguard the value hidden in data on the blockchain. In this paper, we propose an improved scheme for distributed Oracle data aggregation based on Paillier encryption algorithm, which achieves end-to-end data privacy protection from devices to users. To address the issue of dishonest distributed Oracle machines running out of funds, we have designed an algorithm called PICA (Paillier-based InChain Aggregation). Based on the aggregation on the Chainlink chain and the Paillier encryption algorithm, random numbers are introduced to avoid the problem of dishonest Oracle machines running out of funds. We use the traffic coverage method to solve the problem of exposed request paths in distributed Oracle machines. Simulation and experimental results show that in small and medium-sized IoT application scenarios with 10,000 data nodes, each additional false request in a single request will result in a delay of about 2 s in data acquisition and can achieve a request response time of 20 s. The proposed method can achieve user data privacy protection.

Deduplication-Aware Healthcare Data Distribution in IoMT

As medical sensors undergo expeditious advancements, there is rising interest in the realm of healthcare applications within the Internet of Medical Things (IoMT) because of its broad applicability in monitoring the health of patients. IoMT proves beneficial in monitoring, disease diagnosis, and better treatment recommendations. This emerging technology aggregates real-time patient health data from sensors deployed on their bodies. This data collection mechanism consumes excessive power due to the transmission of data of similar types. It necessitates a deduplication mechanism, but this is complicated by the variable sizes of the data chunks, which may be either very small or larger in size. This reduces the likelihood of efficient chunking and, hence, deduplication. In this study, a deduplication-based data aggregation scheme was presented. It includes a Delimiter-Based Incremental Chunking Algorithm (DICA), which recognizes the breakpoint among two frames. The scheme includes static as well as variable-length windows. The proposed algorithm identifies a variable-length chunk using a terminator that optimizes the windows that are variable in size, with a threshold limit for the window size. To validate the scheme, a simulation was performed by utilizing NS-2.35 with the C language in the Ubuntu operating system. The TCL language was employed to set up networks, as well as for messaging purposes. The results demonstrate that the rise in the number of windows of variable size amounts to 62%, 66.7%, 68%, and 72.1% for DSW, RAM, CWCA, and DICA, respectively. The proposed scheme exhibits superior performance in terms of the probability of the false recognition of breakpoints, the static and dynamic sizes of chunks, the average sizes of chunks, the total attained chunks, and energy utilization.

PFDAM: Privacy-Preserving Fine-Grained Data Aggregation Scheme Supporting Multifunctionality in Smart Grid

PFDAM: Privacy-Preserving Fine-Grained Data Aggregation Scheme Supporting Multifunctionality in Smart Grid

A novel positive–negative graph convolutional network-based fault diagnosis method with application to complex systems

Fault diagnosis plays a crucial role in ensuring the safe and stable operation of complex industrial systems. Among various existing methods, graph convolutional network (GCN)-based methods can handle graph-structured data commonly found in industrial systems, due to their capability to capture complex relationships within datasets through association graphs. However, conventional GCN models exclusively consider positive association relationship between data, but do not account for the negative one, resulting in embedding vectors that exhibit clustering tendencies and the over-smoothing issue. To address these challenges, a positive–negative GCN-based fault diagnosis method is proposed in this paper. In the method, the conventional association graph is treated as a positive graph, and a corresponding negative one is constructed to capture negative relationships within the dataset. Furthermore, a graph-level data aggregation strategy is introduced to aggregate the information from both association graphs, and incorporate them into the forward propagation process. Fault diagnosis is achieved using a iteratively trained GCN model. Experimental results on two cases demonstrate that the proposed method outperforms existing fault diagnosis methods in terms of diagnostic performance.

A Secure Data Aggregation Algorithm Based on a Trust Mechanism.

Due to the uniqueness of the underwater environment, traditional data aggregation schemes face many challenges. Most existing data aggregation solutions do not fully consider node trustworthiness, which may result in the inclusion of falsified data sent by malicious nodes during the aggregation process, thereby affecting the accuracy of the aggregated results. Additionally, because of the dynamically changing nature of the underwater environment, current solutions often lack sufficient flexibility to handle situations such as node movement and network topology changes, significantly impacting the stability and reliability of data transmission. To address the aforementioned issues, this paper proposes a secure data aggregation algorithm based on a trust mechanism. By dynamically adjusting the number and size of node slices based on node trust values and transmission distances, the proposed algorithm effectively reduces network communication overhead and improves the accuracy of data aggregation. Due to the variability in the number of node slices, even if attackers intercept some slices, it is difficult for them to reconstruct the complete data, thereby ensuring data security.

A privacy-preserving data aggregation system based on blockchain in VANET

In the realm of vehicular ad hoc networks (VANETs), data aggregation plays a pivotal role in bringing together data from multiple vehicles for further processing and sharing. Erroneous data feedback can significantly impact vehicle operations, control, and overall safety, necessitating the assurance of security in vehicular data aggregation. Addressing the security risks and challenges inherent in data aggregation within VANETs, this paper introduces a blockchain-based scheme for secure and anonymous data aggregation. The proposed scheme integrates cloud computing with blockchain technology, presenting a novel blockchain-based data aggregation system that robustly supports efficient and secure data collection in VANETs. Leveraging key escrow resilience mechanisms, the solution ensures the security of system keys, preventing the security problems caused by keys generated by third parties alone in the past. Furthermore, through secondary data aggregation, fine-grained data aggregation is achieved, providing effective support for cloud services in VANETs. The effectiveness of the proposed scheme is confirmed through security analysis and performance evaluations, demonstrating superior computational and communication efficiency compared existing alternatives.

Smart Contract Assisted Privacy-Preserving Data Aggregation and Management Scheme for Smart Grid

Smart Contract Assisted Privacy-Preserving Data Aggregation and Management Scheme for Smart Grid

Dynamic-anonymous privacy-preserving authenticated aggregation for safety-warning system for the Internet of Vehicles

Currently, the connectivity of vehicles using the latest communication and computing technologies has grown as the Internet of Vehicles (IoV). IoV has been utilized to foster an easy traffic flow by sharing safety-warning messages. However, authentication and confidentiality of shared information is a challenging issue. To solve the problem, various privacy-preserving authenticated data-aggregation schemes have been devised. However, existing schemes have shortcomings specifically concerning a heavy computational cost, and the need for a secure channel. Besides, static pseudonyms may increase the risk of a vehicle’s privacy leakage. In response to these challenges, this study introduces a new pairing-less and secure privacy-preserving authenticated data aggregation (PLS-PPADA) scheme. Leveraging the pairing-less and certificate-based setting, the PLS-PPADA scheme emerges as a robust, efficient, and effective solution for safety-warning systems in IoV. Further, to resolve the risk of privacy leakage due to static pseudonyms, the paradigm of fuzzy identity has been utilized. Thus, it achieves efficiency and dynamic anonymity and also does not require a secure channel for key sharing. A comprehensive security analysis underscores its effective data protection capabilities and efficiency comparison presents it as a compelling alternative to existing state-of-the-art schemes.

A comprehensive and secure scheme for privacy-preserving smart meter data aggregation in the smart grid

Smart meters play a crucial role in the functioning of the smart grid by rapidly collecting and transmitting power consumption data to electricity companies. However, the real-time nature of smart meter data poses privacy risks for customers. To address this concern, encrypted aggregation of smart meter power consumption has been widely employed to protect customer privacy. In this paper, we propose an innovative scheme designed specifically for smart grids to fulfill these requirements. Our scheme demonstrates superior performance compared to existing solutions in terms of communication cost, computation, and functionality features. The proposed authentication protocol not only enables the secure sharing of power consumption data but also satisfies various security requirements, including mutual authentication, anonymity, prevention of man-in-the-middle attacks, and more. Furthermore, our framework exhibits significantly lower computing, communication, and storage overhead compared to similar schemes in the context of smart grids. This highlights the comprehensive and secure nature of our suggested framework, surpassing other existing smart grid schemes in terms of overall effectiveness and reliability.

RSDA: A Reliable and Secure Data Aggregation Scheme for Smart Grid

Smart grids are modern power distribution systems that utilize advanced technologies to optimize energy generation, distribution, and consumption. The huge amount of data generated by various sources, such as smart meters, sensors, and other devices, can be aggregated for efficient energy management, supporting demand response etc. However, this data can contain sensitive information about individual’s energy usage patterns, behaviour, and preferences, which raises several privacy concerns. Data reliability is another major issue, as the data send from the smart meters to the aggregators may get corrupted due to errors introduced by the communication channel. In this paper, a private-key additive homomorphic encryption scheme based on polar codes is proposed for privacy preserving data aggregation. The proposed scheme not only ensures data confidentiality but also provide data reliability. The security of this scheme relies on the difficulty in decoding the codeword and is achieved by embedding security in the generator matrix and error vector. Security analysis shows that the proposed scheme is resistant against all known attacks against private-key code-based cryptosystems. The performance analysis is evaluated in terms of error performance, communication overhead and computational complexity. The performance comparison with related additive homomorphic encryption scheme shows the efficiency of the proposed scheme.

VMEMDA: Verifiable Multidimensional Encrypted Medical Data Aggregation Scheme for Cloud-Based Wireless Body Area Networks

VMEMDA: Verifiable Multidimensional Encrypted Medical Data Aggregation Scheme for Cloud-Based Wireless Body Area Networks

Privacy‐preserving data aggregation achieving completeness of data queries in smart grid

AbstractIn smart grid systems, the control center formulates strategies and provides services by analyzing electricity consumption data. However, ensuring the privacy and security of user data is a critical concern. While traditional data aggregation schemes can provide a certain level of privacy protection for users, they also impose limitations on the control center's access to fine‐grained data. To address these challenges, we propose a privacy‐preserving data aggregation scheme supporting data query (PAQ). We designed a multi‐level data aggregation mechanism based on Paillier semi‐homomorphic encryption to achieve efficient aggregation of user data in the control center. Additionally, a data query mechanism based on electricity consumption intervals is introduced, allowing the control center to query aggregated ciphertexts for different user categories from outsourced data on the cloud server. Security analysis demonstrates that PAQ design effectively solves security issues in data aggregation and query processes. Performance analysis indicates that the proposed scheme outperforms existing solutions in terms of efficiency.

Balancing data privacy and sharing in IIoT: Introducing the GFL-LFF aggregation algorithm

As the Industrial Internet of Things (IIoT) continues to evolve, the need for effective data aggregation schemes that balance the imperatives of data sharing and individual data privacy becomes paramount. Traditional data aggregation methods often entail risks of sensitive information exposure during data transmission and storage. This paper proposes a novel Graphical Federated Learning-based Local Fennec Fox (GFL-LFF) algorithm to ensure secure aggregation by minimizing the revelation of individual data. In this study, a Graph Neural Network (GNN) with federated learning is employed to enhance privacy protection for IIoT's data aggregation scheme. A Local search-based fennec fox optimization is utilized for tuning the parameters of GNN. The GFL and LFF approaches are integrated to enhance the security of the data that can be shared through the IIoT system. The MNIST dataset, CIFAR-10 dataset, and LFW dataset were taken to conduct the experimentation results, and the evaluation measures, such as throughput, end-to-end delay, network lifetime, latency, and energy consumption, are utilized to evaluate the proposed GFL-LFF method, and these results are compared with other approaches. The GFL-LFF method achieved a throughput of 0.98 Mbps, an end-to-end delay of 1.2 s, a network lifetime of 5610 rounds, a latency of 1.6 s, and an energy consumption of 0.2 mJ. The experimental results illustrate the effectiveness of the proposed GFL-LFF method for IIoT's data aggregation scheme in privacy protection.

On the Security of Lightweight and Escrow-Free Certificate-Based Data Aggregation for Smart Grid

Recently, to eliminate complex certificate maintenance and key escrow issue, Verma <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">et al.</i> proposed the first certificate-based(CB-based) data aggregation scheme for smart grids, in which a lightweight CB-based signature is proposed to ensure the integrity of the transmitted data. Although they claimed that the proposed certificate-based signature scheme is secure against attacks by a malicious certification authority (CA), unfortunately, by analyzing the security of Verma <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">et al.</i> 's scheme, we show that their scheme is insecure. It can not provide data integrity since a malicious CA can forge a message's signature in the name of any entity. After giving the corresponding attacks, we analyze the reasons for producing such attacks and provide the corresponding suggestions to overcome them.

Secure data aggregation using quantum key management in IoT networks

The Internet of Things and Quantum Computing raise concerns, as Quantum IoT defines security that exploits quantum security management in IoT. The security of IoT is a significant concern for ensuring secure communications that must be appropriately protected to address key distribution challenges and ensure high security during data transmission. Therefore, in the critical context of IoT environments, secure data aggregation can provide access privileges for accessing network services. "Most data aggregation schemes achieve high computational efficiency; however, the cryptography mechanism faces challenges in finding a solution for the expected security desecration, especially with the advent of quantum computers utilizing public-key cryptosystems despite these limitations. In this paper, the Secure Data Aggregation using Quantum Key Management scheme, named SDA-QKM, employs public-key encryption to enhance the security level of data aggregation. The proposed system introduces traceability and stability checks for the keys to detect adversaries during the data aggregation process, providing efficient security and reducing authentication costs. Here the performance has been evaluated by comparing it with existing competing schemes in terms of data aggregation. The results demonstrate that SDA-QKM offers a robust security analysis against various threats, protecting privacy, authentication, and computation efficiency at a lower computational cost and communication overhead than existing systems.

EPri-MDAS: An efficient privacy-preserving multiple data aggregation scheme without trusted authority for fog-based smart grid

With the increasingly pervasive deployment of fog servers, fog computing extends data processing and analysis to network edges. At the same time, as the next-generation power grid, the smart grid should meet the requirements of security, efficiency, and real-time monitoring of user energy consumption. By utilizing the low-latency and distributed properties of fog computing, it can improve communication efficiency and user service satisfaction in smart grids. For the sake of providing adequate functionality for the power grid, various schemes have been proposed. Whereas, many methods are vulnerable to privacy leakage since the existence of trusted authority may increase the exposure to threats. In this paper, we propose the EPri-MDAS: an Efficient Privacy-preserving Multiple Data Aggregation Scheme without trusted authority based on the ElGamal homomorphic cryptosystem, which achieves both data integrity verification and data source authentication with the most efficient block cipher-based authenticated encryption algorithm. It performs well in energy efficiency with strong security. Especially, the proposed multidimensional aggregation statistics scheme can perform the fine-grained data analyses; it also allows for fault tolerance while protecting personal privacy. The security analysis and simulation experiments show that EPri-MDAS can satisfy the security requirements and work efficiently in the smart grid.