Coordination-driven Self-assembly Research Articles

Coordination-Driven Self-Assembly of Discrete Molecular Nanotubular Architectures.

Two new M8L4 tetrafacial nanotubes (T1 and T3) of different lengths have been synthesized in water using ligands L1 and L2, respectively, with acceptor cis-[(dch)Pt(NO3)2] (M) using coordination-driven self-assembly [where dch is 1,2-diaminocyclohexane, L1 is 1,4-di(pyrimidin-5-yl)benzene, and L2 is 4,4'- di(pyrimidin-5-yl)-1,1'-biphenyl]. In addition to complex T1, a tetrahedral cage of composition [M12(L1)6] (T2) was also formed in the self-assembly reaction of ligand L1 with cis-[(dch)Pt(NO3)2]. The precise composition of the products (T1 and T2) in solution was confirmed by 1H NMR and ESI-MS. Pure tube T1 was separated out by a crystallization technique and fully characterized by 1H NMR and X-ray diffraction. Temperature- and concentration-dependent NMR studies indicated no equilibrium between T1 and T2 in the solution phase, and the proportion of T1 and T2 in the mixture depends on the temperature of the reaction. In contrast to ligand L1, the self-assembly of the longer ligand, L2, with cis-[(dch)Pt(NO3)2] gave only tetrafacial tube [M8(L2)4] (T3) without any tetrahedral cage.

Topological Characterization of Coordination-Driven Self-assembly Complexes: Applications of Ion Mobility-Mass Spectrometry.

Coordination-driven self-assembly (CDSA) is increasingly used to synthesize coordination complexes containing metal-centered electron acceptors and typically nitrogen-containing electron donors. Characterization of the structures obtained from CDSA via crystallographic or spectroscopic means is limited due to difficulties in forming single crystals for X-ray studies and overlapping precursor and product signals in NMR. Here, we employ ion mobility-mass spectrometry (IM-MS), which provides a direct measure of size and shape of the CDSA complexes, to study the intact reaction productsof a rhomboid-shaped complex. This approach negates the need for product isolation and crystallization and allows for tracking of the product distribution as a function of time. A potential challenge of IM-MS is that the size/shape of the observed CDSA complexes can vary with internal energy; however, we show that proper tuning of the instrument reduces the effects of collisional activation thereby allowing for retention of ion conformations that reflect solution-phase ion structures. Graphical Abstract.

Coordination-Driven Self-Assembly of Triazole-Based Apoptosis-Inducible Metallomacrocycles.

Ru(II)-metallomacrocycles containing 4-pyridyl-1,2,3-triazole moiety were realized by coordination-driven self-assembly. All new compounds were characterized by electrospray ionisation mass spectrometry, elemental analysis, and 1H and 13C NMR spectroscopic techniques. The molecular structure of metallomacrocycle 8 was determined by single-crystal X-ray crystallography. The anticancer activities of metallomacrocycles 5–8 were evaluated by cytotoxicity, cell cycle analysis, and related protein expression. Metallomacrocycle 7 showed the highest cytotoxicity in HepG2 human hepatocellular carcinoma cells. In addition, apoptotic HepG2 cells were analyzed when metallomacrocycle 7 was treated. Our results suggest that metallomacrocycle 7 induces liver cancer cell death by increasing apoptosis and cell cycle arrest and that it has potential use as an agent for the treatment of human hepatocellular carcinoma.

Supramolecular Arene-Ruthenium Metallacycle with Thermotropic Liquid-Crystalline Properties

Functionalization of 1,4-di(4-pyridinyl)benzene with poly(arylester) dendrimers bearing cyanobiphenyl end-groups gives a bidentate dendromesogenic ligand (L) that exhibits thermotropic liquid-crystalline properties. Combination of the diruthenium complex [Ru2(p-cymene)2(donq)][DDS]2 (M) with L, by coordination-driven self-assembly, affords the discrete and well-defined metallacycle M2L2. Like L, this supramolecular dendritic system displays mesomorphic properties above 50 °C. Both compounds L and M2L2 show smectic phases, characterized by a multilayered organization of the multiple components.

Investigation of the Anticancer Activity of Coordination-Driven Self-AssembledTwo-Dimensional Ruthenium Metalla-Rectangle.

Coordination-driven self-assembly is an effective synthetic tool for the construction of spatially and electronically tunable supramolecular coordination complexes (SCCs), which are useful in various applications. Herein, we report the synthesis of a two-dimensional discrete metalla-rectangle [(η6-p-cymene)4Ru4(C6H2O4)2(2)2](CF3SO3)4 (3) by the reaction of a dinuclear half-sandwich ruthenium (II) complex [Ru2(η6-p-cymene)2(C6H2O4)Cl2] (1) and bis-pyridyl amide linker (2) in the presence of AgO3SCF3. This cationic ruthenium metalla-rectangle (3) has been isolated as its triflate salt and characterized by analytical techniques including elemental analysis, Fourier-transform infrared spectroscopy (FT-IR), proton nuclear magnetic resonance spectroscopy (1H-NMR), carbon nuclear magnetic resonance spectroscopy (13C-NMR), 1H-1H correlation spectroscopy (COSY), 1H-1H nuclear Overhauser effect spectroscopy (NOESY), diffusion ordered spectroscopy (DOSY), and high-resolution electrospray ionization mass spectrometry (HR-ESI-MS). Significantly, the 2D cationic ruthenium metalla-rectangle showed better anticancer activity towards three different cell lines (A549, Caki-1 and Lovo) as compared with the parent ruthenium complex (1) and the commercially used drug, cisplatin.

Geometrically Complementary Self-Assembly of a Hexarhomboid Architecture from Two Ruthenium(II)-Organic Building Blocks.

A shape-persistent metallosupramolecular multirhomboid that inlays a hexarhomboid polygon in a three-lobed flat structure was prepared by means of coordination-driven self-assembly. The key ligands were synthesized by a "reaction on complex" strategy that becomes accessible to troublesome metalloorganic ligand L3. The formation here consists of four different starting components and two metal ions. Complementarity of the shape and size drives molecular puzzling and results in the multicomponent, quantitative self-assembled construct.

Endo- and Exo-Functionalized Tetraphenylethylene M12L24 Nanospheres: Fluorescence Emission inside a Confined Space.

The intrinsic relationship between the properties of green fluorescent protein (GFP) and its encapsulated small molecular light machine has spurred many biomimicking studies, aiming at revealing the detailed mechanism and further promoting its wide applications in different disciplines. However, how to build a similar confined microenvironment to mimic the cavity of a β-barrel and the fluorescence turn-on process is a fundamental challenge for both chemists and biologists. Herein, two distinct exo- and endo-functionalized tetraphenylethylene (TPE)-based M12L24 nanospheres with precise distribution of anchored TPE moieties and unique photophysical properties were constructed by means of a coordination-driven self-assembly strategy. Under dilute conditions, the nanospheres fluoresce more strongly than the corresponding TPE subcomponents. Meanwhile, the endo-functionalized sphere is able to induce a higher local concentration and more restrained motion of the enclosed 24 TPE units compared with exo-functionalized counterpart and thus induces much stronger emission due to the restriction of the rotation of the pendant TPE units. The biomimetic methodology developed here represents a promising way to understand and construct artificial GFP materials on the platforms of supramolecular coordination complexes.

Influence of Conformational Change and Interligand Hydrogen Bonding in a Chiral Metal-Organic Cage.

We report about the coordination-driven self-assembly of a chiral bis-pyridyl ligand (1), synthesized from steroidal cholic acid, with Pd(II) ions to form a chiral metal-organic Pd2(1)4 cage. The self-assembly of the cage was facilitated by favorable conformational change in the alkyl chain of the cholic acid. Interligand hydrogen bonding played a crucial role in directing the formation of a C4 symmetric cage among different possible isomers, as suggested by DFT studies, and control experiments with different ligands.

Coordination-driven self-assembly of a molecular figure-eight knot and other topologically complex architectures

Over the past decades, molecular knots and links have captivated the chemical community due to their promising mimicry properties in molecular machines and biomolecules and are being realized with increasing frequency with small molecules. Herein, we describe how to utilize stacking interactions and hydrogen-bonding patterns to form trefoil knots, figure-eight knots and [2]catenanes. A transformation can occur between the unique trefoil knot and its isomeric boat-shaped tetranuclear macrocycle by the complementary concentration effect. Remarkably, the realization and authentication of the molecular figure-eight knot with four crossings fills the blank about 41 knot in knot tables. The [2]catenane topology is obtained because the selective naphthalenediimide (NDI)-based ligand, which can engender favorable aromatic donor-acceptor π interactions due to its planar, electron-deficient aromatic surface. The stacking interactions and hydrogen-bond interactions play important roles in these self-assembly processes. The advantages provide an avenue for the generation of structurally and topologically complex supramolecular architectures.

Selective Metal-Phenolic Assembly from Complex Multicomponent Mixtures.

Selective self-assembly in multicomponent mixtures offers a method for isolating desired components from complex systems for the rapid production of functional materials. Developing approaches capable of selective assembly of "target" components into intended three-dimensional structures is challenging because of the intrinsically high complexity of multicomponent systems. Herein, we report the selective coordination-driven self-assembly of metal-phenolic networks (MPNs) from a series of complex multicomponent systems (including crude plant extracts) into thin films via metal chelation with phenolic ligands. The metal (FeIII) selectively assembles low abundant phenolic components (e.g., myricetrin and quercetrin) from plant extracts into thin films. This selective metal-phenolic assembly is independent of the substrate properties (e.g., size, surface charge, and shape). Moreover, the high selectivity is consistent across different target phenolic ligands in model mixtures, even though each individual component can form thin films from single-component systems. A computational simulation of film formation suggests that the driving force for the selective behavior stems from differences in the number of chelating sites in the phenolic structures. The MPN films are shown to demonstrate improved antioxidant properties compared with the corresponding phenolic compounds in their free form, therefore exhibiting potential as free-standing antioxidant films.

Cavity-directed nitroaromatics sensing within a carbazole-based luminescent supramolecular M2L3 cage

The design and preparation of luminescent M2L3 metal-organic cage via the coordination-driven self-assembly of carbazole-based ligand with a V-shaped geometry is described. The cage Zn-L1 with an open cavity which equipped aromatic rich ligands shows the highest emission quenching efficiency towards picric acid than other nitroaromatic explosives. The quenching ability depended on whether there formed the host-guest molecules are well explored by electrospray ionization mass spectrometry (ESI-MS), and isothermal titration microcalorimetry (ITC).

Water Trapping of Metal–Organic Cages with Endohedral Variation

A series of lantern-shaped M2L4 metal–organic cages was synthesized by coordination-driven self-assembly of palladium(II) centers with aromatic amide bidentate ligands, and their crystal structures were investigated. Amide-functionalized ligands provide the complex with polar internal environment and the ability to encapsulate water. Tuning the size of the internal substituent allows to adjust the conformation of the ligand as well as to operate the pattern of counter-anions via steric effect and, further, to influence the arrangement of the encapsulated water guests. Contrary to expectations, the cage decorated with fluorine atoms only encapsulates two water molecules, whereas the cage substituted with larger methoxy groups can bind six water molecules with a chair arrangement. The enlarged capacity was attributed to the extrusion of two nitrate counter-anions from the cavity.

Molecular Lemniscates from Organic-Metal Terpyridine-Based Self-Assembly and Host-Guest Recognition.

The intricate discrete supramolecular architectures via two or more noncovalent interactions are very attractive for chemists. In this paper, a series of homomeric metallo-supramolecular lemniscates were prepared in nearly quantitative yields by assembling either dialkylammonium salt- or benzo-21-crown-7 (B21C7)-containing terpyridyl metallo-organic ligands with Zn2+. Furthermore, the heteromeric analogue could be obtained through two ways: (1) the cooperative interaction of coordination-driven self-assembly and host-guest recognition and (2) the transformation from homodimers to heterodimers driven by host-guest interaction. These supramolecules were characterized by nuclear magnetic resonance (NMR), diffusion-ordered NMR spectroscopy, electrospray ionization mass spectrometry, and two-dimensional (2D) ion-mobility mass spectrometry.

Ruthenium(II) Metalla[2]catenanes and Macrocycles via Donor-Dependent Self-Assembly.

Donor-selective coordination-driven self-assembly of a bis(dipyrrin)-bridged new diruthenium acceptor (RuA) with dipyridyl and diimidazolyl donors has been reported. The self-assembly of the ruthenium(II) acceptor with imidazolyl donors resulted in the formation of either [2 + 2] self-assembled monomeric macrocycles (MMs) or a mixture of metalla[2]catenanes (MCs) and MMs depending on the solvents used. On the contrary, similar self-assembly with the pyridyl donors resulted in simple [2 + 2] macrocycles (MMs) exclusively, irrespective of the solvents used. The new ruthenium acceptor and self-assembled macrocycles were systematically characterized by multinuclear NMR and electrospray ionization mass spectrometry study. The structure of one of the metalla[2]catenanes (MC1) was further confirmed by single-crystal X-ray diffraction studies. Density functional theory calculations inferred that the interlocked structures with imidazolyl donors are stabilized by π-π interactions between the benzene rings, while such interactions cease to exist with the pyridyl linkers, leading to the formation of noninterlocked macrocycles.

Highly Selective Synthesis of Iridium(III) Metalla[2]catenanes through Component Pre-Orientation by π⋅⋅⋅π Stacking.

A series of molecular metalla[2]catenanes featuring Cp*Ir vertices have been prepared by the template-free, coordination-driven self-assembly of dinuclear iridium acceptors and 1,5-bis[2-(4-pyridyl)ethynyl]anthracene donors. The metalla[2]catenanes were formed by using a strategically selected linker type that is capable of participating in sandwich-type π-π stacking interactions. In the solid state, the [2]catenanes adopt two different configurations depending on the halogen atoms at the dinuclear metal complex bridge. Altering the solvent or the concentration, as well as the addition of guest molecules, enabled controlled transformations between metalla[2]catenanes and tetranuclear metallarectangles.

Designed Conformation and Fluorescence Properties of Self-Assembled Phenazine-Cored Platinum(II) Metallacycles.

A series of platinum(II) metallacycles were prepared via the coordination-driven self-assembly of a phenazine-cored dipyridyl donor with a 90° Pt(II) acceptor and various dicarboxylate donors in a 1:1:2 ratio. While the metallacycles display similar absorption profiles, they exhibit a trend of blue-shifted fluorescence emission with the decrease in the bite angles between the carboxylate building blocks. Comprehensive spectroscopic and dynamic studies as well as a computational approach were conducted, revealing that the difference in the degree of constraint imposed on the excited-state planarization of the phenazine core within these metallacycles results in their distinct photophysical behaviors. As such, a small initial difference in the dicarboxylate building blocks is amplified into distinct photophysical properties of the metallacycles, which is reminiscent of the efficient functional tuning observed in natural systems. In addition to the pre-assembly approach, the photophysical properties of a metallacycle can also be modulated using a post-assembly modification to the dicarboxylate building block, suggesting another strategy for functional tuning. This research illustrated the potential of coordination-driven self-assembly for the preparation of materials with precisely tailored functionalities at the molecular level.

Soft Materials with Diverse Suprastructures via the Self-Assembly of Metal-Organic Complexes.

Inspired by assemblies in the natural world, researchers have prepared diverse suprastructures with distinct spatial arrangements by artificial self-assembly, including micelles, vesicles, ribbons, films, fibers, and tubes. The field of assembly is undergoing a transition from single-component to multicomponent assembly and single-step to multistep processing. Control over the size, shape, and composition of these building blocks has enabled the formation of suprastructures with substantial structural diversity. More importantly, harnessing noncovalent interactions to create suprastructures in a controlled manner will lead to a better understanding of the formation of complex self-organized patterns. However, for the construction of multiscale self-assemblies with controllable shapes and functions, the selection of a suitable protocol remains challenging. Coordination-driven self-assembly provides a bottom-up approach to construct various metal-organic complexes (MOCs), which could be further used as building blocks with controllable shapes and sizes. Despite the tremendous progress made in the design of MOC-based supramolecular materials, most of these MOCs have dimensions of only several nanometers, and investigations of these structures rely on the characterization of their crystal structure. However, most of the functional suprastructures in living organisms have dimensions ranging from microns to centimeters and have the form of soft materials. Thus, obtaining MOC-based highly ordered materials of larger size remains a challenge. This Account focuses on our recent advances in the construction of soft suprastructure materials with MOCs. A series of functionalized MOCs was first constructed through coordination-driven self-assembly. Then, further self-assembly of the as-prepared MOCs gave rise to the formation of higher-order structures. By changing the functional groups in the acceptors and donors in the MOCs, different suprastructures, including nanospheres, nanodiamonds, nanorods, nanofibers, membranes, films, and gels, were prepared. These studies suggest that using MOCs as building blocks is a highly efficient strategy to achieve complex architectures and functional materials for the development of desired MOC-based soft materials with high precision and fidelity.

Supramolecular Control of Photocycloadditions in Solution: In Situ Stereoselective Synthesis and Release of Cyclobutanes.

A new class of supramolecular metallacycles capable of undergoing photochemical reactions and in situ release of cyclobutanes in solution is described. The molecular metallacycles were generated through coordination-driven self-assembly of dinuclear metal-carbene complexes as organometallic clips with olefin-functionalized bridging ligands. Photolysis of these molecular metallacycles in situ led to structural interconversion and release of the formed cyclobutane products with quantitative conversion. Further modifications of the obtained cyclobutanes provided a series of new species containing the cyclobutane skeleton.

Multicomponent Porphyrin-Based Tetragonal Prismatic Metallacages and their Photophysical Properties.

Multicomponent coordination-driven self-assembly has proved to be a convenient approach to prepare advanced supramolecular coordination complexes (SCCs), especially for those with three-dimensional structures. Herein, we report the preparation of three tetragonal prismatic cages via the self-assembly of Pt(PEt3)2(OTf)2, three different linear dipyridyl ligands and porphyrin-based sodium benzoate ligands. Due to the efficient charge separation in the coordination process of Pt(PEt3)2(OTf)2 with pyridine and carboxylic acid and the directionality of metal-coordination bonds, these cages were prepared in high isolated yields (more than 90%). The absorption and emission properties as well as the singlet oxygen quantum yields of these cages were also studied, showing their potential applications as contrast agents for bio-imaging and photosensitizers for photodynamic therapy.

AIE-active Metal-organic Coordination Complexes Based on Tetraphenylethylene Unit and Their Applications

Tetraphenylethylene (TPE) and its derivatives, as the widely used aggregation-induced emission (AIE) fluorophores, have attracted rapidly growing interest in the fields of material science and biological technology due to their unique light-emitting mechanism—they are nearly non-emissive in dilute solution but emit brilliant fluorescence in the aggregate state because of the restriction of intramolecular motion. Coordination-driven self-assembly, which provides a highly effective method to put the individual chromophores together, is consistent with the AIE mechanism of TPE. During the past few years, some AIE-active metal-organic coordination complexes have been successfully constructed via coordination-driven self-assembly, and their AIE properties and applications have been investigated. In this review, we survey the recent progress on TPE-based metal-organic coordination complexes and their applications in fluorescence sensors, cell imaging, and light-emitting materials. We will introduce them from three different types of structures: metallacycles, metallacages, and metal-organic frameworks (MOFs).