Concentrations Of Hydrocarbons Research Articles

Morphological traits, yield, antioxidant activity and essential oil composition of oregano as affected by biostimulant foliar applications

Biostimulants are interesting products which can promote the plant growth and improve its qualitative traits. In this research, the effects of foliar applications of four biostimulants on oregano (Origanum vulgare L.) crop have been investigated by evaluating morphological parameters, fresh and dry yield, antioxidant activity, total phenolic content, and chemical composition of essential oil. The highest plant height (78 cm), inflorescence height (22.2 cm), inflorescences+leaves dry yield (0.5 t ha−1), dry matter yield (38.3 %) and essential oil yield (3.4 %) were obtained in plants treated with biostimulant BlueN®, composted of Methylobacterium symbioticum SB23. Plants treated with Acadian MPE®, containing vitamins, amino acids and proteins, and betaines, showed the highest total phenolic content (60.3 GAE mg mL−1). The combination of 21 traits with principal component analysis (PCA) allowed to discriminate the biostimulant Biostimol Plus plus Peptamin-V Plus®, based on Ascophyllum nodosum extract and other elements as nitrogen, carbon, manganese, zinc and iron chelates, in a correlated way with p-cymene, α-thujene, α-terpinene, β-myrcene contents, showing values significantly higher. The heat-map identified two main clusters where the treatments with biostimulants were clearly separated from the control. Biostimulant treatments influenced the chemical composition of essential oil by increasing the number of components, monoterpene hydrocarbons and sesquiterpene hydrocarbons contents. Therefore, biostimulants can play an important role with a view to sustainable oregano cultivation by representing a safe source of nitrogen and especially for organic farming.

Optimization of Bioremediation of Crude Oil Polluted Soil through Variation in Moisture Content and Proportion of Augmenting Bacterium and Fungus

Aim: The aim of this study was to enhance bioremediation of crude-oil polluted soil through optimization procedures. Study Design: The Box-Benkhen coded values format and experimental design were used in the design of the study. Place and Duration of Study: The study was carried out in the Microbiology laboratory of the Department of Microbiology, Rivers State University, Nigeria, between February 2024 and July 2024. Methodology: Hydrocarbon utilizing bacteria (HUB) & fungi (HUF) were isolated from crude-oil polluted soil, and screened for hydrocarbon degrading ability (HCDA). HUB and HUF with the highest HCDA were identified and used for bioremediation optimization experiment. In the experiment, different combination of moisture content (MC), and proportion of HUB (pHUB) & HUF (pHUF) were investigated for their effect on extent of hydrocarbon reduction (EoHR). EoHR obtained from the different combinations were fitted using a generalized polynomial model so as to obtain a polynomial equation for predicting EoHR. The equation was used in generating prediction profiles from which the combined values of the 3 parameters that will lead to the highest EoHR was determined. The predicted combined values were implemented in a new setup. A control and a setup enhanced with fertilizer were also prepared. The setups were maintained for 3 weeks. On day 0, 14, and 21 samples were collected and analyzed for total hydrocarbon concentration (THC). Results: The results obtained showed that among the coded isolated HUB and HUF, HB5 and HF1 had the highest HCDA; 36.4% and 4.1% respectively, and were identified phenotypically as Klebsiella ornithinolytica and Aspergillus flavus respectively. The results of the optimization experiment and prediction profiles showed that the highest (68.6%) EoHR was achievable at MC = 20%, pHUB = 10%, and pHUF = 1%. The actual EoHR on day 21 in the optimized, enhanced optimized, and control setups were 60.3, 58.9, and 39.9% respectively. Conclusion: Bioremediation optimization studies is advantageous and should be carried out on crude-oil polluted sites before carrying out bioremediation.

Construction of Fe3O4@Dop-Triazine-CuCl2 as a novel and green nanocatalyst for C–Se coupling reaction of heterocyclic compounds

In this research, we first fabricated Fe3O4@Dop-Triazine-CuCl2 nanocatalyst by simple method, then its catalytic activity was investigated in the preparation of various derivatives of aryl-heteroaryl and di-heteroaryl selenides through C–Se coupling reactions of aryl iodides with powder selenium and various derivatives of heterocyclic compounds (with active C–H bonds). The catalyst exhibited spherical morphology with a diameter of approximately 20–30 nm and a magnetic saturation moment of 50.032 emu/g. The hydrocarbon content was measured to be around 12% by weight. In this method, a wide range of aryl-heteroaryl and di-heteroaryl selenides (36 examples) were synthesized with high yields (85–97%) using catalytic amount of the Fe3O4@Dop-Triazine-CuCl2 nanomaterial in the presence of KHCO3 in [BMIM]PF6 as solvent. This method has several remarkable features, which can be mentioned as follows: the synthesis of aryl-heteroaryl and di-heteroaryl selenide derivatives with high yields, performing the reactions in a suitable time (4 h), the applicability of this catalytic system for a wide range of substrates, the use of ionic liquid as solvent, high efficiency of Fe3O4@Dop-Triazine-CuCl2 catalyst, simple separation and high reusability of nanocatalyst.

Effect of thermal pretreatments on the quality attributes and irradiation markers of sesame oil extracted from sesame seeds without and with gamma irradiation

This study comparatively studied the effects of three thermal pretreatment methods, i.e., wet-heat (WT), roasting (RT) and microwave (MT), on the quality attributes and irradiation markers of sesame oil obtained from sesame seeds without and with gamma irradiation. Results showed that gamma irradiation had negligible effect on the quality of sesame seeds and their extracted oils. The effects of thermal pretreatments on irradiated and non-irradiated sesame seeds and their oils were similar, little synergistic effects were observed. The RT-treated oils had more carotenoids, chlorophyll, total phenols, tocopherols, and heterocyclic volatiles content, as well as longer oxidation induction time, but darker color compared with their WT- and MT-treated counterparts. All oil samples had identical FTIR spectra. Eight radiolytic hydrocarbons were identified in the irradiated sesame oils. Thermal pretreatments reduced the content of radiolytic hydrocarbons, but did not significantly change their composition. Our study helps to identify products from irradiated sesame seeds.

Survival and reproduction tests using springtails reveal weathered petroleum hydrocarbon soil toxicity in boreal ecozone.

Survival and reproduction tests were conducted using two native springtail (subclass: Collembola) species to determine the toxicity of a fine-grained (< 0.005 - 0.425 mm) soil from an industrial site located in the Canadian boreal ecozone. Accidental petroleum hydrocarbon (PHC) release continuously occurred at this site until 1998, resulting in a total hydrocarbon concentration of 12,800mg/kg (soil dry weight). Subfractions of the PHC-contaminated soil were characterized using Canadian Council of Ministers of the Environment Fractions, which are based on effective carbon numbers (nC). Fraction 2 (> nC10 to nC16) was measured at 8400mg/kg and Fraction 3 (> nC16 to nC34) at 4250mg/kg in the contaminated soil. Age-synchronized colonies of Folsomia candida and Proisotoma minuta were subject to 0%, 25%, 50%, 75%, and 100% relative contamination mixtures of the PHC-contaminated and background site soil (< 100mg/kg total PHCs) for 28 and 21days, respectively. Survival and reproduction decreased significantly (Kruskal-Wallis Tests: p < 0.05, df = 4.0) in treatments of the contaminated site soil compared to the background soil. In both species, the most significant decline in survival and reproduction occurred between the 0% and 25% contaminated soil. Toxicity responses in the two springtails were ascribed to the standardized test design, short lifespans, and high fecundity in both species. This study showed that 25 + years of soil weathering has not eliminated the toxicity of fine-grained PHC-contaminated soil on two native terrestrial springtail species. Adverse effects to springtail health were attributed to exposure to soils dominated by genotoxic PHC Fraction 2 compounds and slow weathering processes due to the cold climate at the site.

Ecological and Geochemical Assessment of the State of Soils in the City of Baikalsk According to the Content of Polycyclic Aromatic Hydrocarbons

The pollution of the topsoils of the city of Baikalsk (Irkutsk region) under the influence of industrial emissions and wastes of the Baikal Pulp and Paper Mill (BPPM) was studied. The content of 16 individual PAH structures in samples of urban and background soils taken during the soil geochemical survey in the summer of 2019 was analyzed. Relatively low levels of PAH content were found in the lignin sludge from the BPPM and СHP ash. The concentration of total PAHs in CHP ash reaches 46 mg/ kg with a predominance of low molecular weight compounds (the proportion of naphthalene and its homologues is 24% and 34% of the total PAHs, respectively), among high molecular weight PAHs, 5-nuclear benzo(b)fluoranthene dominates (16%). In lignin sludge, the amount of PAHs is 7.16 mg/kg with the predominance of benzo(b)fluoranthene (83%). In the soils of Baikalsk, the average total content of PAHs (38.4 mg/kg) is 5 times higher than the background content. In urban soils, 4–5-nuclear fluoranthene (61.1%) and benzo(b)fluoranthene (29.4%) prevail. This makes it possible to attribute soil pollution to the fluoranthene type. The soils of the motor transport (total PAH 105 mg/kg) and industrial (59.5 mg/ kg) zones are the most polluted, where the most contrasting PAH anomalies were formed. In descending order of the amount of PAHs, the land use zones of the city form a series: motor transport industrial residential one-storey railway transport residential multi-storey recreational zone. Several local anomalies in the amount of PAHs are distinguished, forming two large pollution halos in the western and eastern parts of the city. The leading factors in the accumulation of high molecular weight PAHs in soils are acid-alkaline conditions and soil organic matter, while the accumulation of low molecular weight polyarenes is mainly controlled by pH. The environmental hazard of pollution of Baikalsk soils with polyarenes is due to benzo(b)fluoranthene, its contribution is 83.5%.

Behaviors and mechanism of volatiles producing during coal pyrolysis with calcium oxide loading: Insights from model compounds analysis

Calcium is a highly effective catalyst for controlling the tar compounds produced during the pyrolysis of low-rank coal, forming valuable end products. However, the exact catalytic mechanism of calcium in coal pyrolysis remains unclear due to the complex nature of coal. In this study, the pyrolysis process and tar composition of lignite, both with and without the addition of calcium, were investigated across three distinct temperature intervals. The addition of calcium oxide increased the hydrocarbon content of tar by 16.39 % in the low-temperature range and 26.53 % in the intermediate-temperature range. Four model compounds containing different coal-related functional groups were selected to investigate the effects of calcium on pyrolysis performance and tar composition using thermogravimetric analysis, fixed bed reactor experiments, gas chromatography/mass spectrometry, in situ Fourier transform infrared spectroscopy, X-ray diffractometer, and X-ray photoelectron spectroscopy. The addition of calcium did not affect the thermal decomposition of polystyrene or polyethylene terephthalate; however, the primary pyrolysates underwent secondary reactions on the surface of calcium, which affected the composition of the liquid pyrolysis product. Meanwhile, calcium interacted with the carboxyl and phenolic hydroxyl groups in trimeric acid and phenolic resin to form carboxylates and phenates, which affected the thermal reaction and distribution of liquid products. The influence of calcium on the transformation mechanism of coal-related functional groups provides a theoretical basis for understanding the mechanism of calcium-catalyzed coal pyrolysis.

Microwave co-pyrolysis of Chlorella vulgaris and tea oilseed residues under metal-organic frameworks derived catalysts

The co-pyrolysis of Chlorella vulgaris (CV) and tea oilseed residue (TR) is beneficial for improving the pyrolysis characteristics and bio-oil quality. In this study, the effects of different added amounts (5 %, 10 %, 15 %, and 20 %) of metal-organic frameworks (MOFs) derived catalysts (Cu/C, Co/C, Cu-Co/C) on the co-pyrolysis of CV and TR were investigated using microwave pyrolysis oven. The results showed that the MOFs derived catalysts improved the co-pyrolysis reaction; the maximum average reaction rate (Rv, 0.02466 wt%/s), and the minimum reaction time (Ts, 2900 s) were obtained at 20 % Cu-Co/C. In addition, 15 % Co/C obtained the highest bio-oil yield, which reached 23.26 wt%. In the case of bio-char, the highest yield (29.83 wt%) was obtained at 5 % Cu-Co/C. Finally, GC-MS analysis showed that compared to C1T1 (CV:TR = 1:1), the Cu/C and Cu-Co/C catalysts increased the hydrocarbon content in bio-oil by 7.68 % and 9.68 % respectively, while reducing the contents of phenols and amines, whereas Co/C reduced the ester content of bio-oil by 19.14 %.

Catalytic pyrolysis of wheat straw based on dual catalyst CaO/ZSM-5 with acid washing and torrefaction pretreatment to enhance aromatic yield in bio-oils

In this paper, the catalytic pyrolysis integrating combined pretreatment (acid washing and torrefaction) and dual catalysts was adopted to improve the quality of bio-oil and the selectivity of aromatic hydrocarbons. Combined pretreatment is a highly effective method to improve the quality of biomass feedstock. It was capable of the removal of alkali and alkaline earth metals from wheat straw, with a K removal rate of 97.79 %. Under the combined pretreatment, the aromatic hydrocarbon content in bio-oil increased to 68.8 % using the ZSM-5 catalyst alone. Compared with ZSM-5, CaO could remove part of the oxygenated functional groups and had a better acid removal effect, but the aromatic hydrocarbon yield was low to 7.95 %. After combined pretreatment using simulated aqueous phase bio-oil for acid washing, catalytic pyrolysis using CaO/ZSM-5 dual catalysts greatly enhanced the quality of the bio-oil. The oxygenated compounds content was reduced to 17.58 %, and the total hydrocarbon yield was increased to 82.42 %, especially the aromatic hydrocarbons yield was increased to 79.91 %, of which the monocyclic aromatic hydrocarbons were as high as 68.38 %, and the benzene, toluene, and xylene content reaching 49.39 %. Thus, integrating dual catalysts (CaO/ZSM-5) with combined pretreatment can effectively increase the aromatic yield for producing high-quality bio-oil.

Preparation of metal-modified carbon-based catalyst and experimental study on catalytic pyrolysis of distillers dried grains with solubles

Distillers dried grains with solubles (DDGS) offer high calorific value, suited for catalytic rapid pyrolysis for energy and chemical applications, yet tar and coke formation during bio-oil upgrading necessitates exploration of cost-effective, durable biocarbon-based catalysts for tar removal. In this study, a carbon-based catalyst was prepared by metal modification of alkaline biochar for catalytic pyrolysis with Distillers dried grains with solubles (DDGS) biomass. Brunauer–Emmet–Teller (BET), X-ray diffraction (XRD), Fourier Transform Infrared (FTIR) were used to characterized the morphology and microstructure of the metal-modified carbon-based catalysts. Pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) was used to analysis the pyrolysis-gas of catalytic pyrolysis. Furthermore, the effects of the loading and metal mass ratio of carbon-based monometallic catalysts (Fe and Co) and carbon-based bimetallic catalysts (Fe-Co) on the distribution of the DDGS pyrolysis products were further investigated. The results showed that the 8 wt% of loading rate of bimetallic catalyst significantly reduced the oxygenated compounds but increased the aromatic hydrocarbons. Compared with pyrolysis without catalyst, when the catalyst was 2Fe6Co (mass ratio of Fe/Co 1:3), the hydrocarbons increased from 36.42 % to 44.53 %, the oxygen-containing compounds decreased from 60.36 % to 52.35 %, and the aromatics increased significantly from 0.73 % to 25.37 %. This study provides a new route of increasing the aromatic hydrocarbon content of catalytic pyrolysis to offer theoretical basis for carbon-based catalysts of biomass conversion.

Production of Bio-Oil from Sugarcane Bagasse through Hydrothermal Liquefaction Processes with Modified Zeolite Socony Mobil-5 Catalyst

In response to the increasing global demand for sustainable energy alternatives, this research explores the efficient conversion of sugarcane bagasse to bio-oil through hydrothermal liquefaction (HTL) processes with modified Zeolite Socony Mobil-5 catalysts (ZSM-5). The study systematically investigates the impact of feedstock quantity, reaction temperature, duration, and catalyst loading on bio-oil yield and quality. Optimisation experiments revealed that a feedstock amount of 10 grammes, an HTL temperature of 340 °C for 60 min and a ZSM-5 catalyst loading of 3 grammes resulted in the highest bio-oil yield. Furthermore, the introduction of Ni and Fe metals to ZSM-5 exhibited enhanced catalytic activity without compromising the structure of the zeolites. Comprehensive characterisation of modified catalysts using SEM-EDS, XRD, TGA, TEM, and FTIR provided insight into their structural and chemical properties. The successful incorporation of Ni and Fe into ZSM-5 was confirmed, highlighting promising applications in hydrothermal liquefaction. Gas chromatography–mass spectrometry (GC-MS) analysis of bio-oils demonstrated the effectiveness of the 2% Fe/ZSM-5 catalyst, highlighting a significant increase in hydrocarbon content. FTIR analysis of the produced bio-oils indicated a reduction in functional groups and intensified aromatic peaks, suggesting a shift in chemical composition favouring aromatic hydrocarbons. This study provides valuable information on HTL optimisation, catalyst modification, and bio-oil characterisation, advancing the understanding of sustainable biofuel production. The findings underscore the catalytic prowess of modified ZSM-5, particularly with iron incorporation, in promoting the formation of valuable hydrocarbons during hydrothermal liquefaction.

Hydrocarbon Traps for the Air Intake System: Component Test Rig and SHED Test Procedure for Determining Their Efficiencies

Hydrocarbon traps in the air intake system (AIS) are a common method for controlling evaporative emissions from the air intake path. Several different systems are available, but there is no standard method for determining their efficiencies. Therefore, a component test rig for hydrocarbon traps was developed. Some optimizations were necessary to achieve emission characteristics observed in engine measurements. Using this setup, several measurements were performed on four different hydrocarbon traps. The results were in reasonable agreement with those from engine measurements. Two different hydrocarbon (HC) traps were selected for further studies. In these studies, the repeatability and the dependency of the emission mass level were investigated. Furthermore, the hydrocarbon concentration in the air filter box was determined using point source flame ionization detector (FID) sampling and a metal oxide semiconductor (MOS) sensor. The data showed a correlation with the emission mass determined in a sealed housing emission determination (SHED) test.

Vegetal layer restoration of contaminated sites from petroleum industry using sewage sludge

Soil is a non-renewable natural resource, extremely valuable for maintaining life on Earth. Large areas of soil are often polluted with petroleum products as a result of various human activities. In this case, it is necessary to remediate the contaminated soils from the oil industry and return them to the natural and economic circuit. In addition, large quantities of sewage sludge are generated daily by sewage treatment plants. The purpose of this study was to use the soil subjected to a bioremediation experiment with sewage sludge as support for the development of a new vegetal layer to restore the natural balance. The grass was sown in the land, which had previously been treated with sewage to monitor its development. Through microbiological analysis, we observed that soil and sewage sludge mixtures have a high content of heterotrophic bacteria and filamentous fungi that could play an important role in seed germination. IR (infrared spectroscopy) analysis revealed a decrease in hydrocarbon concentrations in the petroleum- contaminated soil treated with sewage sludge. By using the combined methods SEM-EDX (scanning electron microscopy – energy dispersive X-ray), we also analyzed the soil microstructure and the distribution of chemical elements to highlight the plants' evolution. The present study considers soil regeneration in areas contaminated with petroleum products and opens new perspectives for the use of sewage sludge in the ecological reconstruction of petroleum-contaminated sites.

In-situ hydrothermal upgrading and mechanism of heavy oil with nano-Fe2O3 in the porous media

Hydrothermal upgrading is a promising technology for heavy oil, yet the impact of reservoir conditions on the catalytic effect of catalysts and the pathway are not clear. In this study, the effect of the formation environment on the catalytic upgrading process was investigated through simulating the reservoir conditions (2000 mD permeability, 25 % porosity) for catalytic hydrothermal cracking of heavy oil. Under the hydrothermal upgrading conditions（240 ℃, 24 h, 50 wt%, 0.1 wt% nano-Fe2O3）, 9.15 % of the heavy component(5.1 % resin and 4.05 % asphaltene) was converted to light component. The content of hydrocarbons below C17 in the saturated fraction increased from 36.29 % to 59.85 %. The structure of the asphaltene was disrupted resulting in a lower level of asphaltene stacking, and NC/NH ratio increased 13.61 % compared to heavy oil. In addition, the reservoir condition with quartz as the supporting medium improved the catalytic ability of iron oxide nanoparticles. When injected into the reservoir medium, nano-size facilitated dispersion on the surface of the proppant and inhibited the aggregation of nanoparticles, which ensured the continuous operation of the active sites on the surface of the catalyst. Electron transfer of Fe2+/Fe3+ catalyzed the heterolytic cleavage of covalent bonds of H2O/heavy oil molecules was the mechanism for heavy oil upgrading. These findings demonstrated the feasibility of in-situ upgrading of heavy oil through the use of nano-catalysts under reservoir conditions.

Assessment of Hydrocarbon Contamination Using 2D Resistivity Imagining Method and Geochemical Analysis in Ibadan, Southwestern Nigeria

The study examined the use of 2D resistivity imaging survey and geochemical analysis to map and assess the level of soil contamination due to hydrocarbon spillage in Araromi Auto Spare Parts Market Ibadan, Southwestern Nigeria. The objectives are to provide 2D inverted resistivity sections beneath the study area, delineate anomalously low resistivity zones indicative of long-term hydrocarbon contamination in the sections, and determine concentrations of Polycyclic Aromatic Hydrocarbons (PAHs) in the suspected soils. Five traverses were run using Wenner array with electrode spacing varied from 5 m to 15 m and station increment of 5 m. The resistivity data were processed by using 2D inversion procedure to generate the 2D inverted resistivity sections. Geochemical analysis was conducted on five soil samples collected at 1 m depth in the low resistivity zones delineated on the 2D inversion sections, to determine the concentration of Polycyclic Aromatic Hydrocarbons (PAHs) to assess the level of contamination. The 2D inverted sections delineated low resistivity anomalies, ranging from 1.25 Ωm to 5.54 Ωm, characteristic of mature biodegraded hydrocarbon contamination. The results of geochemical analysis revealed total PAH concentration of 1390 µg/kg to 16140 µg/kg suggesting that the study area is heavily contaminated by the used motor oil. The combined use of 2D resistivity imaging and geochemical analysis has shown that soils beneath the study area has been heavily contaminated by the used motor oil, and may constitute potential health risk to the soil and groundwater systems in its vicinity. The results are expected to serve as useful guide in planning remediation programme.

Multiple endpoints analysis of the effects of diesel oil on a commercial species, Carcinus maenas

Fuel spills in marine environments pose significant threats to aquatic ecosystems, evidencing the intricate relationship between fuel utilization and its impact on benthic species of commercial value for human consumption. This interconnectedness of human, animal and environmental welfare falls within the One Health framework. The aim of the present study was to evaluate the toxicological effects of diesel oil on the green crab Carcinus maenas, and make a parallelism between tested concentrations and petrogenic hydrocarbon levels in natural environments. Mortality, locomotion and feeding behavior, molting, somatic growth, morphological malformations, stress biomarkers, and nutritional variables were analyzed in three different bioassays. In Bioassay 1, prepuberal females were exposed to diesel oil water accommodated fraction (WAF) to determine the median lethal concentration (LC50) at different periods. In Bioassay 2, prepuberal females were exposed to 168 h LC50 and LC25 of diesel oil WAF for 7 days, and were subsequently exposed to clean water. In Bioassay 3, prepuberal females were exposed to 168 h LC12 and LC6 of diesel oil WAF for 30 days. Petrogenic hydrocarbon levels in the field were quantified at a port and a nature reserve, with concentrations of aromatic hydrocarbons being 1.92 μg/g in the former and below 0.01 μg/g in the latter. In Bioassay 1, the 168 h LC50 was estimated to be 1.04 % of diesel oil. The results obtained in Bioassays 2 (LC50 and LC25) and Bioassays 3 (LC12 and LC6) suggest that environmental exposure to petrogenic hydrocarbons produces high mortality or interferes with the molting process of crabs, leading to reduced growth and developmental abnormalities. Such malformations were observed in chelipeds, pereiopods, gills chambers and eye peduncles, and affected feeding and locomotion behaviors. Overall, this could impact on population size and health, and consequently alter the ecological role and commercial exploitation of economically important species like C. maenas.

Chemical Recycling of Mixed Polyolefin Post-Consumer Plastic Waste Sorting Residues (MPO323)-Auto-Catalytic Reforming and Decontamination with Pyrolysis Char as an Active Material.

Mixed plastic packaging waste sorting residue (MPO323) was treated by thermal pyrolysis to utilize pyrolysis oil and char. The pyrolysis oil was found to contain aromatic and aliphatic hydrocarbons. The chlorine and bromine contents were as high as 40,000 mg/kg and 200 mg/kg, respectively. Additionally, other elements like sulfur, phosphorous, iron, aluminum, and lead were detected, which can be interpreted as impurities relating to the utilization of oils for chemical recycling. The pyrolysis char showed high contents of potentially active species like silicon, calcium, aluminum, iron, and others. To enhance the content of aromatic hydrocarbons and to reduce the level of contaminants, pyrolysis oil was reformed with the corresponding pyrolysis char to act as an active material in a fixed bed. The temperature of the reactor and the flow rate of the pyrolysis oil feed were varied to gain insights on the cracking and reforming reactions, as well as on performance with regard to decontamination.

Effects of anthropogenic activities on the microbial community diversity of Ologe Lagoon sediment in Lagos State, Nigeria.

The impact of pollution on the Ologe Lagoon was assessed by comparing physicochemical properties, hydrocarbon concentrations and microbial community structures of the sediments obtained from distinct sites of the lagoon. The locations were the human activity site (OLHAS), industrial-contaminated sites (OLICS) and relatively undisturbed site (OLPS). The physicochemical properties, heavy metal concentrations and hydrocarbon profiles were determined using standard methods. The microbial community structures of the sediments were determined using shotgun next-generation sequencing (NGS), taxonomic profiling was performed using centrifuge and statistical analysis was done using statistical analysis for metagenomics profile (STAMP) and Microsoft Excel. The result showed acidic pH across all sampling points, while the nitrogen content at OLPS was low (7.44 ± 0.085mg/L) as compared with OLHAS (44.380 ± 0.962mg/L) and OLICS (59.485 ± 0.827mg/L). The levels of the cadmium, lead and nickel in the three sites were above the regulatory limits. The gas chromatography flame ionization detector (GC-FID) profile revealed hydrocarbon contaminations with nC14 tetradecane > alpha xylene > nC9 nonane > acenaphthylene more enriched at OLPS. Structurally, the sediments metagenomes consisted of 43 phyla,75 classes each, 165, 161, 166 orders, 986, 927 and 866 bacterial genera and 1476, 1129, 1327 species from OLHAS, OLICS and OLPS, respectively. The dominant phyla in the sediments were Proteobacteria, Firmicutes, Actinobacteria, and Chloroflexi. The principal component ordination (PCO) showed that OLPS microbial community had a total variance of 87.7% PCO1, setting it apart from OLHAS and OLICS. OLICS and OLHAS were separated by PCO2 accounting for 12.3% variation, and the most polluted site is the OLPS.

Role of Organic Vapor Precursors in Secondary Organic Aerosol Formation: Concurrent Observations of IVOCs and VOCs in Guangzhou

AbstractSecondary organic aerosol (SOA) formed through the atmospheric transformation of organic vapors constitutes a significant portion of fine particulate matter or PM2.5. While recent laboratory studies underscore the importance of intermediate‐volatility organic compounds (IVOCs) as key precursors to SOA, field observations that recognize the role of both volatile organic compounds (VOCs) and IVOCs in SOA formation remain scarce. In this study, we conducted concurrent measurements of VOCs and IVOCs in ambient air at urban and suburban sites in Guangzhou during a PM2.5 pollution event in winter 2021. The results reveal that between 12:00–15:00 local time, the photochemically adjusted initial concentrations of VOCs at both sites were approximately 7 times higher than that of IVOCs. However, the SOA formation potential (SOAFP) of primary hydrocarbon IVOCs exceeded that of VOCs by over 3–4 times. Receptor modeling results further indicated that while ship emissions contributed to less than 10% of the C2–C22 primary hydrocarbons concentration (VOCs + primary carbonaceous IVOCs), they accounted for the most significant source (approximately 40%) of SOA formation. This study highlights the substantial role of IVOCs in SOA formation and emphasizes the importance of future PM2.5 pollution control measures targeting major IVOCs contributors, such as ship emissions in harbor cities.

Microwave catalytic co-pyrolysis of microalgae and high density polyethylene over activated carbon supported bimetallic: Characteristics and bio-oil analysis

Three activated carbon (AC) supported bimetallic catalysts (Ce-Fe/AC, Ce-Ni/AC, Ce-Cu/AC) were prepared, and the catalysts' impacts on the microwave co-pyrolysis of Chlorella vulgaris (C. vulgaris) and high density polyethylene (HDPE) (mixing ratio of 1:1, C1HP1) were explored. The findings indicated that the catalysts promoted the co-pyrolysis of C1HP1 substantially at 40 % and 50 % additions. The minimum reaction time (2945 s) was observed at 40 % Ce–Fe/AC. Compared to the C1HP1 group, Ce-Fe/AC groups exhibited a pronounced promotional impact on bio-oil production, with the maximum bio-oil yield (25.8 %) catalyzed by 30 % Ce–Fe/AC. Furthermore, the catalyst's high hydrogenation activity and deoxygenation promoted the formation of H2O, NH3 and HCN, achieving over 40 % efficiencies in deoxygenation and denitrification for bio-oil. 40 % Ce–Cu/AC exhibited superior performance with the highest hydrocarbon (67.43 %) and aromatic hydrocarbon content (50.75 %), as well as leading deoxygenation (44.38 %) and nitrogen removal (58.63 %) efficiency among the AC supported bimetallic catalysts.