Concentrations Of Hydrocarbons Research Articles

Historical sedimentary and evolutionary characteristics of POPs and EDCs in typical regions of the three Gorges reservoir, China

The historical sedimentary and evolutionary characteristics of persistent organic pollutants and endocrine disruptors in typical regions of the Three Gorges Reservoir are scarcely studied. Herein, the 96-year data on contaminated sediment history were reconstructed using Caesium 137 isotope dating. Polychlorinated biphenyl concentrations in the involved sediment cores ranged from non-detected (ND) to 11.39 ng/g. The concentrations of polycyclic aromatic hydrocarbons ranged from ND to 2075.20 ng/g and peaked in the 1970s owing to natural, agricultural and human activities. Further, phthalate esters (PAEs) and heavy metals (HMs) were detected at concentrations ranging from ND to 589.2 ng/g and 12.10–93.67 μg/g, respectively, with highest values recorded in the 1980s owing to rapid industrialisation and insufficient management during China's early reform and development stages. PAE and HM concentrations have increased in recent years, suggesting the need to focus on industrial and agricultural activities that have caused this impact. Although current pollutant concentrations in sediments do not pose a risk to the aquatic ecosystem, they should be continuously monitored.

Relationship between foliar polycyclic aromatic hydrocarbons (PAHs) concentrations and plant traits: Intracanopy variability for a broadleaf species in an urban environment

The emission of potentially harmful compounds, including polycyclic aromatic hydrocarbons (PAHs), and the resulting air pollution is a serious problem in modern cities. It is therefore important to develop mitigation strategies, such as “smart” planting of trees that act as sinks for PAHs. However, the intra-individual (within-tree) variability in leaf PAH concentrations remains unknown. In this paper, we studied 15 ornamental apple trees (Malus × moerlandsii ‘Profusion’) growing on a main street in a medium-sized city in Galicia (NW Spain). We determined the PAH concentrations at 12 canopy positions in each tree (2 orientations and 2 distances from the trunk at 3 heights), measured various ecological traits (specific leaf area [SLA], δ13C, stomatal density, fatty acid contents and leaf hairiness) and analyzed the variability in traits within the canopy in relation to PAH concentrations. We observed high intra-individual variability in the PAH concentrations and the leaf traits. Statistical analyses revealed that leaf height was the main source of variability both in the PAH concentrations and in the traits, mainly due to the leaf morphology, particularly to the SLA. Therefore, the ideal vegetation to remove PAHs would be high leaf biomass trees, not too tall and with a high proportion of shade leaves.

Mucor thermorhizoides—A New Species from Post-mining Site in Sudety Mountains (Poland)

Mucor representatives are mostly rapidly growing cosmopolitan soil saprotrophs of early diverged Mucoromycotina subphylum. Although this is the most speciose genus within the group, some lineages are still understudied. In this study, new species of Mucor was isolated from the post-mining area in southwestern Poland, where soil chemical composition analysis revealed high concentration of hydrocarbons and heavy metals. Phylogenetic analysis based on multigene phylogeny showed that the new isolate clusters distinctly from other Mucor species as a sister group to Mucor microsporus. New species Mucor thermorhizoides Abramczyk (Mucorales, Mucoromycota) is characterized by the extensive rhizoid production in elevated temperatures and formation of two layers of sporangiophores. It also significantly differs from M. microsporus in the shape of spores and the size of sporangia. M. thermorhizoides was shown to be able to grow in oligotrophic conditions at low temperatures. Together with M. microsporus they represent understudied and highly variable lineage of the Mucor genus.

Enhanced Natural Attenuation Technique, Edaphic and Microbiological Changes in Oil-Impacted Soil of Odhiaje Community, Rivers State

Oil spills in the Niger Delta could exert environmental pressures on the soil component. We investigated the impacts of oil spills and the effect of the Enhanced Natural Attenuation (ENA) remediation method on contaminated soil and resident microbial populations in the Odhiaje community in Rivers State, Nigeria. Soil samples for microbiological studies were collected weekly during a 17-week remediation period, while those for edaphic parameters were taken before and after remediation, all at 4 sampling points (SPs). Serial dilution of the oil-impacted soils for microbial density enumeration was carried out according to standard methods. Results revealed that mean concentrations of Total Petroleum Hydrocarbon Contents (THC) (Sig.value = 0.009), SO42- ions (Sig.value = 0.001), and sand compositions (Sig.value = 0.045) all differed markedly across the sampling points at p<0.05. Mean levels of EC (Sig.tvalue = 0.039) and ΣN (Sig.tvalue = 0.058) & K+ ions (Sig.tvalue = 0.004) differed significantly before and after the remediation exercise at the 95% confidence interval. Application of nutrients was rapidly accompanied by microbial population increases, leading to the consumption of oil contaminants in soils to levels comparable to control over the remediation period. Total Heterotrophic Bacteria counts correlated with pH (r = 0.501) and SO42- ions (r = 0.500) (p<0.05), and K+ ions (r = -0.800) (p<0.01); Total Heterotrophic Fungi correlated with pH (r = 0.520) (p<0.05), and Mg2+ ions (r = 0.820) (p<0.01); Hydrocarbon Utilizing Bacteria correlated with available P (r = 0.530) and silt composition (r = -0.504) (p<0.05), and K+ (r = 0.626) and Mg2+ ions (r = 0.733) (p<0.01); and Hydrocarbon Utilizing Fungi correlated with K+ (r = 0.500) & Mg2+ ions (r = 0.506) (p<0.05). Results indicate improvement in C/N ratios and effectiveness of the current cost-effective bioaugmentation technique in the restoration of arable soil productivity in the Odhiaje community.

Impacts of LNAPL types on mechanisms and rate of natural source zone depletion

Understanding the mechanisms of natural source zone depletion (NSZD) will support an improved understanding of the long-term sustainability of NSZD as a site remedy and how NSZD rates may change over time. This is the first study that has quantified and compared the rate of three NSZD mechanisms (methanogenesis, vaporization, and aqueous biodegradation) between two chemically distinct light non-aqueous phase liquid (LNAPL) source zones (aliphatic-rich naphtha for Zone #1 vs aromatic-rich pyrolysis gasoline for Zone #2) within the same geologic and climate conditions. The rates of NSZD attributable to vaporization (400 mg C/m2/d vs. 300 mg C/m2/d) and aqueous biodegradation (92 mg C/m2/d vs. 67 mg C/m2/d) were similar for Zone #1 and #2; however, the rate of methanogenesis NSZD was 6x higher in Zone #1 (1000 mg C/m2/d vs. 170 mg C/m2/d). These results suggest that the aliphatic hydrocarbons content in an LNAPL source may be a factor in the rate of methanogenesis NSZD. For both Zone #1 and #2, total NSZD rate determined using this “three mechanism” measurement method was in reasonable agreement with two other methods used to measure total NSZD rates (CO2 Gradient Method and Dynamic Closed Chamber Method), validating the “three mechanism” method as a tool to measure the total NSZD rate at a site and to provide an improved understanding of the predominant NSZD mechanism. Overall, this study highlights the importance of LNAPL type and chemical characteristics in determining source zone natural attenuation mechanism and its total rates.

Energy strategy alteration, rather than toxicity itself, interferes with the population fluctuation of Brachionus plicatilis exposed to water-accommodated fractions (WAFs) of crude oil

Oil spills are reported to have conflicting impacts of either injury or resilience on zooplankton communities, and physiological plasticity is speculated to be the possible causative factor. But how? An explanation was sought by exposing the marine rotifer Brachionus plicatilis to a series of water-accommodated fractions (WAFs) of crude oil under controlled laboratory conditions, and population dynamics, which is the core issue for zooplankton facing external stress, were analyzed. The total hydrocarbon concentration of WAFs was quickly degraded from a concentration of 5.0 mg L−1 to half within 24 h and then remained stable. No acute lethality was observed; only motion inhibition was observed in the group treated with 10 %, 50 % and 100 % WAFs, which occurred simultaneously with inhibition of feeding and filtration. However, sublethal exposure to the WAFs concentration series presented stimulation impacts on reproduction and even the population of B. plicatilis. The negative correlation between motion and reproduction seemed to indicate that a shift in the distribution of individual energy toward reproduction rather than motion resulted in increased reproduction after exposure to WAFs. More evidence from transmission electron microscopy (TEM) revealed ultrastructural impairment in both the ovaries and cilia in each treated group, and imbalance in mitochondrial numbers was one of the distinct features of alteration. WAFs stress may alter the energy utilization and storage paradigm, as indicated by the significant elevation in glycogen and the significant decrease in lipid content after WAFs exposure. Further evidence from metabolomics analysis showed that WAFs stress increased the level of lipid metabolism and inhibited some of the pathways in glucose metabolism. Sublethal acute toxicity was observed only in the first 24 h with WAFs exposure, and an energy strategy consisting of changes in the utilization and storage paradigm and reallocation is responsible for the population resilience of B. plicatilis during oil spills.

EFFECT OF THE FEED GAS MIXTURE COMPOSITION AT METHANOL DEHYDROGENATION TO FORMALDEHYDE ON SUPPORTED OXIDE CATALYSTS

The article presents the results of a study of the activity of deposited oxide catalysts in the process of obtaining formaldehyde from methanol. Model catalysts were prepared by impregnation of finely porous silica gel with nitrate solutions of zinc, copper, silver, sodium, followed by heat treatment. The catalytic properties of the samples were studied in the reaction of methanol dehydrogenation in the flow mode on a fine fraction of the catalyst. With the complication of the composition of the feed gas mixture, part of argon was replaced with hydrogen, mono- and carbon dioxide. The reaction mixture was analyzed by gas chromatography, IR spectroscopy and photocolorimetry. At a temperature of ~350 °C, a noticeable formation of formaldehyde begins, upon reaching a temperature of 500 °C in the reactor, methanol processing begins to decrease, while the concentration of formaldehyde changes insignificantly. Along with formaldehyde, dimethyl ether, methane and carbon dioxide are fixed in the reaction products. At the end of the tests on the surface of the catalyst, carbon, oxygen and hydrogen are quantified using elemental analysis methods, the ratio between which corresponds to the formula (-COH-)n. That is, along with the target reaction, methanol is consumed for the formation of surface hydrocarbons. Oxymethylene oligomers can decompose along two competing routes to form formaldehyde or carbon and CO2. The addition of carbon dioxide to the feed gas mixture after the catalyst enters the stationary mode leads to a significant increase in its formaldehyde yield. It is obvious that the route with the formation of carbon dioxide is associated with the target reaction of formaldehyde production, where the catalytic reaction maintains a certain concentration of active centers. Thus, it can be assumed that carbon dioxide as a product of decomposition of surface oxymethylene compounds affects the rate of the catalytic reaction by maintaining a certain concentration of surface hydrocarbons, which are necessary as an element of the active catalytic center. For citation: Morozov L.N., Vorobyov A.S., Kunin A.V., Egorov N.A., Timoshin E.S. Effect of the feed gas mixture composition at methanol dehydrogenation to formaldehyde on supported oxide catalysts. ChemChemTech [Izv. Vyssh. Uchebn. Zaved. Khim. Khim. Tekhnol.]. 2024. V. 67. N 7. P. 88-95. DOI: 10.6060/ivkkt.20246707.7003.

Measuring ecological quality status in low-diversity Arctic intertidal foraminiferal assemblages using a diversity-based index

EcoQS assessment of the marine intertidal zone based on its fauna is challenging because the assemblages have a low diversity and consist of stress tolerant species. The new approach we propose is to pool foraminiferal diversity (effective number of species exp(H'bc)) across the whole intertidal zone including the salt marsh and tidal flat. In seven fjordheads studied in northern Fennoscandia, polycyclic aromatic hydrocarbon (PAH) concentrations indicated low levels of pollution (EcoQSPAH Excellent to Moderate). Jadammina or Balticammina dominated the salt marsh, Elphidium albiumbilicatum, Elphidium williamsoni, Elphidium clavatum, and Buccella frigida occurred in the tidal flat. Ovammina opaca thrived in both belts. While foraminiferal test abnormalities are often proposed to measure pollution impacts, we did not detect any correlation with PAHs. EcoQS based on foraminiferal diversity (EcoQSforam Excellent to Good) matched EcoQS based on PAHs suggesting that pooled foraminiferal diversity reliably measures intertidal EcoQS.

Determination of Polycyclic Aromatic Hydrocarbons (PAHs) Concentration in Borehole Water from Orhuworhun Town, Delta State, Nigeria.

The quest for quality water and its importance have made it necessary to assess the potability of the water supply. This investigation was carried out to evaluate the concentration of PAHs in borehole water obtained from Orhuwhorun town in Delta State, Nigeria. The water sample was collected from a resident borehole and stored in a sterile bottle to avoid contamination. The water sample was analyzed for PAHs with the use of a gas chromatography mass spectrometer (GC-MC). The total concentration of PAH in water (?16 EPA PAHs), which are 16, includes chrysene (Chry), benzo[b]fluoranthene (BbF), acenaphthene (Ace), benz[a]anthracene (BaA), acenaphthylene (AcPy), anthracene (Ant), benzo[k]fluoranthene (BkF), benzo[ghi]perylene (BghiP), benzo[a]pyrene (BaP), Indeno[1,2,3- cd]pyrene (IndP), fluoranthene (Flu), dibenz[a,h]anthracene (DahA), naphthalene (Nap), pyrene (Pyr), phenanthrene (Phe), and fluorene (Flu). The mean concentration in this study ranges from 22.729 to 102.109 mg/L. The concentration of dibenz[a,h]anthracene (DahA) was observed to be the highest, while the concentration of Chry was found to be the lowest amongst all Ó16 PAH congeners detected. The result of this study was compared with the U.S. EPA Standard Limit, and all PAH congeners were found to exceed the standard limit, which shows that the sample is not fit for drinking. This significant concentration of PAH in the water can be attributed to various anthropogenic activities and untreated waste containing PAH. Therefore, there is an urgent need for regulatory agencies to make sure that industries check for environmental compliance.

Recent Advances in Sample Preparation and Chromatographic/Mass Spectrometric Techniques for Detecting Polycyclic Aromatic Hydrocarbons in Edible Oils: 2010 to Present.

Polycyclic aromatic hydrocarbons are considered to be potentially genotoxic and carcinogenic to humans. For non-smoking populations, food is the main source of polycyclic aromatic hydrocarbons exposure. Due to their lipophilic nature, oils and fats rank among the food items with the highest polycyclic aromatic hydrocarbon content. Consequently, the detection of polycyclic aromatic hydrocarbons in edible oils is critical for the promotion of human health. This paper reviews sample pretreatment methods, such as liquid-phase-based extraction methods, adsorbent-based extraction methods, and the QuEChERS (quick, easy, cheap, effective, rugged, and safe) method, combined with detection techniques like mass spectrometry and chromatography-based techniques for accurate quantification of polycyclic aromatic hydrocarbons in edible oils since 2010. An overview on the advances of the methods discussed herein, along with a commentary addition of current challenges and prospects, will guide researchers to focus on developing more effective detection methods and control measures to reduce the potential risks and hazards posed by polycyclic aromatic hydrocarbons.

Investigation of the pollutant load of artisanal-refined gasoline in the Niger Delta region of Nigeria and its implications on air quality

In order to examine the gaseous pollutants generated by artisanal refined gasoline and the contribution to air pollution associated with such combustion in the Niger-Delta region of Nigeria, this study collected a sample of indigenously refined gasoline product each from thirty (30) different randomly selected artisanal camps in the Niger-Delta region and subjected all the collected samples to combustion. Fifty (50) ml of each gasoline sample was combusted at controlled conditions, and the concentrations of gaseous emissions from the process were measured using a combustion emission analyser. Pollutants characterised by the Department of Petroleum Resources which include sulphur dioxide (SO2), carbon monoxide (CO), oxides of nitrogen (NOx), hydrocarbons (HC) and carbon dioxide (CO2) were characterised. The average concentrations of the emissions were 211.50 mg/m3, 7.18 mg/m3, 17.51 mg/m3, 3011.33 mg/m3, and 500.39 mg/m3 for CO, NOx, SO2, CO2, and HC respectively. The concentrations of SO2 and NOx measured were within the Federal Environmental Protection Agency (FEPA) set limits for combustion emissions from stationary sources but breached World Health Organization (WHO), World Bank and Environmental Guidelines and Standard for Petroleum Industry in Nigeria (EGASPIN) set limits. The concentrations of CO and HC exceeded FEPA, WHO, World Bank and EGASPIN set limits and hazardous on Air Quality Index (AQI) classification. Elevated concentrations of CO and HC in the atmosphere pose a major threat to ambient air quality and human health, especially in locations where artisanal-refined fuel is predominantly utilised. Associated risks include poor visibility, occurrence of acid rain, blood poisoning and cancer-related diseases. In addition to these effects are the worsening global warming crises associated with CO2 emission, a major product of fossil fuel combustion.

Characterization and bio-oil analysis of microalgae and waste tires by microwave catalytic co-pyrolysis

Waste tires (WT) are difficult to degrade in natural conditions, but co-pyrolysis with other substances can release environmental pressure. Thus, microwave catalytic co-pyrolysis of WT and Chlorella vulgaris (CV) were studied. The effects of material mixing ratio, catalysts (NiO, CoO and CeO) and their addition amounts (5%, 10%, 15% and 20%) on the co-pyrolysis were analyzed. The results showed that bio-oil yield was boosted by co-pyrolysis and the maximum value (19.77%) appeared at C6W4 (CV:WT = 6:4). While adding 15%NiO, the maximum yield of bio-oil increased by 8.66%. Compared with CV pyrolysis alone, the deoxidation rate, denitrification rate, and desulfurization rate of C6W4 were as high as 44.57%, 59.82% and 52.59%, respectively. Catalysts improved the quality of bio-oil, the highest hydrocarbon content (58.3%) and denitrification rate (27.07%) were obtained at the 15%NiO. The highest aromatic hydrocarbon content (33.2%) and deoxygenation rate (10.31%) appeared in 15%CoO.

Investigation of the speciation and environmental risk of heavy metals in biochar produced from textile sludge waste by pyrolysis at different temperatures

The aim of the present study was to find environmentally friendly solutions for the disposal of problematic and toxic textile sludge (TS) by producing textile sludge biochar (TSB) by pyrolysis and evaluating its chemical properties, polycyclic aromatic hydrocarbon (PAH) content, heavy metals (HMs) speciation, environmental risks, and effects on seed germination. Pyrolysis of TS at temperatures ranging from 300 to 700 °C significantly reduced (85–95%) or eliminated certain PAHs in the biochar, enriched heavy metal content within land use limits, and increased bioavailability of HMs in biochar produced at 300 °C and decreased leaching capacity of HMs in biochar produced at 700 °C. The speciation of HMs and their bioavailability during pyrolysis processes was strongly temperature dependent, with lower temperatures increasing the toxic and bioavailable forms of Zn and Ni, while higher temperatures converted the bioavailable Ni to a more stable form, while Cu, Cr, and Pb were transformed from stable to toxic and bioavailable forms. The ecological risk index (RI) values of TSB-300 and TSB-700 are below the threshold value of 150, indicating a low-risk level, and the risk level decreases at temperatures above 500 °C. Further, the extracts of TSB-300 and TSB-700 had the highest percentage of germinating seeds, while the extracts of TS and TSB-500 inhibited seed germination by 20–30% compared to the control. These results indicate that pyrolysis effectively reduces PAHs and binds leachable HMs in biochar, however, the specific pyrolysis temperature influences metal speciation, bioavailability, seed germination, and environmental risk.

Release and generation of polycyclic aromatic hydrocarbons during co-pyrolysis of straw and coal: A case of corn straw and brown coal

The release of polycyclic aromatic hydrocarbons (PAHs) during the pyrolysis of corn straw, brown coal, and their mixtures was investigated in this study. The mixing ratios were the essential factor in determining the release and generation of PAHs. Adjustments to the mixing ratio revealed that the activation energy reached its nadir at a corn straw proportion of 75%. As the corn straw proportion increased, PAHs’ yield and toxic equivalents decreased. Furthermore, this study elucidated the generation of PAHs in the products by integrating experiments and reaction kinetics calculations. Low-ring and medium-ring PAHs were generated more readily, while the content of high-ring PAHs and product toxicity decreased rapidly upon adding corn straw. Finally, the high oxygen content in corn straw generates oxygen radicals that reduce the concentration of hydrocarbons and benzenes, which mitigates the generation of PAHs and enhances the quality of the resultant oil.

One-pot synthesis of Fe modified lignin biochar for ex-situ catalytic fast pyrolysis of enzymatic hydrolysis lignin to promote the generation of aromatic hydrocarbons

The utilization of waste lignin to produce bio-oil rich in aromatics aromatic hydrocarbons is promising and attractive for a wide range of applications. Fe-modified lignin biochar (xFe/ALC) prepared using a one-step method was utilized as catalysts to investigate their impact on product distribution, aromatic hydrocarbon generation, and pathways during ex-situ catalytic fast pyrolysis of enzymatic hydrolysis lignin. The results revealed that the addition of Fe enhanced the production of gas products such as H2, while decreasing bio-oil yield. The lowest bio-oil yield, at 12.10 wt%, was observed at a Fe loading of 25 wt%, however the relative content of aromatic hydrocarbons reached a maximum value of 16.24 area%. Compared to the pyrolysis of lignin alone, their contents increased by 2.46 times, with the content of monocyclic aromatic hydrocarbons (toluene, ethylbenzene, styrene, xylene) increasing by 1.5–3.8 times. Spent 25Fe/ALC had good stability on the production of aromatic hydrocarbons. Compared with non-catalytic pyrolysis of lignin, the aromatic hydrocarbons content for spent 25Fe/ALC after four cycles increased by 26.70%.

Microbial community structure and metabolic profile of anthropized freshwater tributary channels from La Plata River, Argentina, to develop sustainable remediation strategies.

Microbial communities from freshwater sediments are involved in biogeochemical cycles and they can be modified by physical and chemical changes in the environment. Linking the microbial community structure (MCS) with physicochemistry of freshwater courses allows a better understanding of its ecology and can be useful to assess the ecological impact generated by human activity. The MCS of tributary channels from La Plata River affected by oil refinery (C, D, and E) and one also by urban discharges (C) was studied. For this purpose, 16S rRNA metabarcoding analysis, in silico metagenome functional prediction, and the hydrocarbon degradation potential (in silico predictions of hydrocarbon-degrading genes and their quantification by qPCR) of the MCS were studied. Principal coordinate analysis revealed that the MCS was different between sites, and it was not structured by the hydrocarbon content. Site C showed physicochemical characteristics, bacterial taxa, and an in silico functional prediction related to fermentative/heterotrophic metabolism. Site D, despite having higher concentration of hydrocarbon, presented autotrophic, syntrophic, and methanogenic pathways commonly involved in natural processes in anoxic sediments. Site E showed and intermediate autotrophic/heterotrophic behavior. The hydrocarbon degradation potential showed no positive correlation between the hydrocarbon-degrading genes quantified and predicted. The results suggest that the hydrocarbon concentration in the sites was not enough selection pressure to structure the bacterial community composition. Understanding which is the variable that structures the bacterial community composition is essential for monitoring and designing of sustainable management strategies for contaminated freshwater ecosystems.

The potential of Serratia marcescens in Bioremediation of Crude-oil Polluted Soil

Bioremediation, which involves the use of microorganisms, is an environmentally friendly approach in restoring crude-oil polluted environments. The use of Serratia marcescens (SM) in bioremediation of crude-oil polluted soil was investigated in this study. Soil from a farm was inoculated in nutrient broth for bacterial enrichment. The broth culture was inoculated on nutrient agar and incubated at ambient temperatures (27 – 32 °C). Bacterial isolates with red colonies were selected and identified. Identified SM was used in preparing bacterial-mineral-salts suspension. The bioremediation experiment consisted of two setups: Control (CT) and setup treated with SM (TSM). Both setups contained crude-oil polluted soil. Mineral-salt solution and the bacterial-mineral-salt suspension were added to setup CT and TSM, respectively. Total hydrocarbon concentration (THC), total heterotrophic bacteria (THB), hydrocarbon utilizing bacteria (HUB), total fungi (TF), and hydrocarbon utilizing fungi (HUF) in the setups were determined at various times. About 38.3 % and 46.5 % THC reduction were achieved in setup CT and TSM, respectively. The percentage of THB that are HUB was higher in setup TSM on day 7 (8.8 %) and day 28 (4.4 %) but higher in setup CT on day 14 (1.7 %) and day 21 (6.6 %). The percentage of TF that are HUF was higher in setup TSM on day 14 (98.0 %) and on day 28 (41.6 %) but higher in setup CT on day 21 (85.3 %). It is concluded that SM has a potential for use in bioremediation of crude-oil polluted soil

The Significance of Processing Techniques on the Quality of Smoked African Cat Fish (Clarias gariepinus) Using Different Energy Sources

There is unavoidable need for fish smoking as a preservative technique to reduce rampant post harvest losses in the tropical Africa. However the imperative of healthier and quality smoked products through improved processing method were however investigated. Organoleptic and chemical assessment of African catfish collected from a reputable fish farm in Ogbomoso, Oyo state Nigeria was carried out. Eviscerated and non-eviserated fish samples were smoked using four different smoke sources: Gmelina (Gmnelina arborea), Parkia (Parkia biglobosa), Neem (Azadirachita indica) and charcoal. Overall acceptability was based on 5-point Hedonic scale (excellent (5) - poor (1). Chemical test was on Polycyclic Aromatic Hydrocarbon contents (benzo(a)pyrene, Fluoranthene, Napthalene, Acenapthalene, Chrysene and Benzo(ghi) perylene). Data were subjected to one way Analysis of Variance (ANOVA) using general linear mode (GLM) of Factorial Experimental Design and means were separated by Duncan’s multiple range tests (P<0.05). Non- eviscerated smoked African catfish samples had lower scores for colour than eviscerated smoked samples for energy sources used. Eviscerated samples had mean scores of 4.64, 3.91, 3.36 and 2.82 for charcoal, Gmelina, Neem and Parkia smoked samples respectively, much better than scores of 4.36, 2.46, 2.36 and 2.27 obtained for non-eviscerated samples. Total concentrations of polycyclic aromatic hydrocarbons (PAH) were highest in samples produced using Gmelina as smoke source and Neem for eviscerated (15.25 µg/kg) and non-eviscerated (29.43 µg/kg) samples respectively. Evisceration of fish prior to smoking enhances its sensory characteristics however; concentrations of PAHs for both eviscerated and non-eviscerated fish samples were within the recommended international standard limit.

Water Quality and the First-Flush Effect in Roof-Based Rainwater Harvesting, Part II: First Flush

Rainwater runoff samples from a range of roofing materials were temporally collected from 19 small-scale roof structures and two commercial buildings through simulated and actual storm events, and the concentrations of polycyclic aromatic hydrocarbons (PAHs), phosphorus flame retardants (PFLs), and pyrethroid insecticides and other water quality parameters were analyzed. In Part I of this research, the concentrations of these contaminants in roof runoff and soils receiving runoff from a range of roofing materials were evaluated. In Part II, recommendations have been developed for a first-flush exclusion to improve the quality of water harvesting for nonpotable uses. Recommendations focus on a first-flush diversion based on mass removals of total suspended solids (TSS) and PAHs linked to conductivity measurements throughout a storm event. Additionally, an upper-confidence limit (UCL) was constructed to determine the minimum diversion required to obtain 50, 75, 90, and 95% mass removal of TSS and PAH contaminants. The majority of TSS were produced during the initial 1.2 mm of runoff. Likewise, the majority of PAHs were removed during the initial 1.2 mm of runoff, except for the asphalt shingle roofs, where high PAHs were observed after 6 mm of runoff. The Texas Water Development Board (TWDB)-recommended first-flush diversion of one gallon for every 100 square feet of rooftop was not always adequate for removing 50% of TSS and PAHs from the roofs. Rainwater runoff conductivity decreased drastically between 1.2 to 2.4 mm of rainwater runoff. Diverting the first flush based on conductivity has the potential to also divert the majority of TSS and PAHs in roof runoff.

Hazards Associated with Plastic Wastes in the Communities of Niger Delta, Nigeria

The goal of this study was to investigate into the negative impacts that the presence of plastic waste in the communities located in the Niger Delta may have on the environment and human health. The following physico-chemical properties of the water, fish, sediment, and human blood samples were measured and analyzed: pH, electrical conductivity, total dissolved solids, temperature, dissolved oxygen, nitrate, and phosphate. Furthermore, an assessment of polycyclic aromatic hydrocarbons (PAHs) was included of the inquiry. Gas chromatography mass spectrometry (GC-MS) was used to measure the concentrations of polycyclic aromatic hydrocarbons (PAHs). The data was analyzed using the Statistical Package for the Social Sciences, Version 25.0. Standard deviation, mean, and percentage were among the descriptive statistical metrics used. Furthermore, inferential statistical techniques like Turkey's Test and Analysis of Variance (ANOVA) were used to determine the presence of this correlation within a 0.05 confidence interval. The study's findings showed that polycyclic aromatic hydrocarbon (PAH) congeners came in 10, 9, and 11 distinct varieties in fish, water, and human blood, respectively. Therefore, it is essential to conduct routine monitoring to assess the effects that waste plastic is having on the aquatic resources and the local people in the Niger Delta. This will help evaluate how these environmental risks are now manifesting and how they affect public health.