Carbon Content Research Articles

Sintering process optimization of the additively manufactured pure copper parts through the metal paste deposited process

The fabrication process, sintering cycles through two sintering methods, microstructural and texture characterization, mechanical properties, and electrical conductivity of metal paste-deposited copper parts were investigated in this study. In the first condition, samples were air-debinded for carbon content removal followed by a sintering cycle. A sintering profile with the maximum sintering temperature and time of 1080 °C and 1hr. was implemented after performing the air-debinding cycle at 250 °C for 2 hrs. In the second condition, samples were sintered in the environment of copper oxide for carbon removal in the early stages of the sintering cycle, i.e., 1070 °C for 1hr and 1080 °C for 1, 2, and 3 hrs. The microstructural observations revealed coarser grains in the air-debinded samples, perhaps due to additional generated heat during carbon oxide formation, which may produce destructive effects on the boundary (HAGBs, twins, and CSL) volume and densification behavior of copper parts. However, through the second method, much finer grains and higher densities of boundaries were detected in the microstructure. Despite the significant effect of sintering conditions on the microstructure, texture interpretations revealed minor changes in the pole figures for different situations. Using the second sintering method and owing to the less carbon content and based on the density of the boundaries and their configurations, higher electrical conductivity (98.4±1.3% IACS) was recorded by sintering the green parts. The comparison between the data from this study with other parts printed through other additive manufacturing techniques demonstrated a superior electrical conductivity level and acceptable balance between strain and strain notably with the sample sintered for 3 hrs.

Synergistic adsorption–photocatalytic degradation of the emerging contaminant hydroxybenzotriazole by a 3D sponge-like easy separation polypyrrole/TiO2 composite

Herein, a 3D sponge-like polypyrrole/TiO2 (Ppy-TiO2) composite aerogel was developed for the first time to remove hydroxybenzotriazole (HOBt) from water. Mesoporous TiO2 was prepared via a sol–gel method, and then the Ppy-TiO2 composite hydrogel was prepared by oxidative polymerization and converted to aerogel by freeze-drying. The morphological, compositional, and surface characteristics of the prepared materials were detailly characterized. The characterization studies revealed that pure anatase mesoporous TiO2 nanoparticles were successfully prepared and incorporated into amorphous 3D Ppy with a porous chain-like network structure. Coupling Ppy and TiO2 extended the light absorption to the visible region and decreased the electron/hole recombination rate. The performance studies revealed that the Ppy-TiO2 composite has higher adsorption and photocatalytic activities than the sum of the individual components. Optimum performance was obtained at pH 5.3 using 0.25 g/L of the Ppy-TiO2 composite with a Ppy: TiO2 mass ratio of 1:1. The intermolecular hydrogen bonding was pivotal in the adsorption process which was multilayer. The degradation of HOBt occurs primarily by holes, then superoxide anion radicals. The total organic carbon (TOC) analysis showed a 90% reduction in carbon content after 30 min of treatment. The toxicity study indicated that the photocatalytic process decreased the toxicity of the HOBt solution. The synergism between adsorption and photocatalysis, easy separation, and reusability promote the application of Ppy-TiO2 composite aerogel for water treatment.

Insights into potential of banana leaf powder as a mud soil stabilizer

This study proposes a novel method for managing surplus soil in urban construction projects by investigating the use of banana leaf powder (BLP) as an eco-friendly and efficient mud-soil stabilizer. This study is pioneering in its focus on the use of an agricultural waste product, BLP, as an alternative to conventional methods that frequently rely on cement or lime, which pose environmental concerns owing to their high alkalinity and carbon emissions. BLP, derived from dried and pulverized banana leaves, traditionally used in various industries, was evaluated for its suitability as a stabilizer against orange peel biopolymer (OBP) and fly ash (FA). The findings of this study are groundbreaking. BLP’s water absorption capacity, Wab, although lower than that of OBP, was significantly higher than that of FA, demonstrating its potential as a mud soil stabilizer. BLP increased the compaction and strength of the treated clay, whereas OBP made it more challenging to compact the clay owing to gelatinization. The ease of compaction with BLP is attributed to the absorption of free water into the pores of the particles. These results suggest that differences in the stabilizer’s water absorption mechanism affect the effectiveness of the post-treatment compaction process on the treated soil. An analysis of the impact of water absorption capacity on the cone index, qc, revealed a material-independent relationship between the parameter β (=Wab ×A, where A denotes stabilizer addition content) and qc for BLP and FA. This is because, in contrast to OBP, BLP and FA did not gelatinize the free water that was not absorbed by the stabilizer and remained in the same form within the treated clay. This indicates that understanding the water absorption capacity and mechanism of organic- or inorganic-based stabilizers is important for predicting the strength of treated soil. The same relationship between β and qc holds true for the hybrid-treated clay using both BLP and FA, with β considered to be the sum of β for both BLP and FA. Furthermore, this study innovatively addresses the concern of BLP decay in treated soil by creating a hybrid stabilizer with FA and conducting experiments to accelerate BLP decay using fungal mycelia. These experiments revealed that the hybrid-treated clay exhibited a more gradual decrease in carbon content and stabilized pH levels, implying that FA could inhibit decay by fungal mycelia, improving the BLP-treated soil’s long-term durability. These findings suggest that agricultural wastes with high organic content can be effectively used for soil stabilization and ground improvement in civil engineering construction and maintenance projects by combining inorganic materials and taking advantage of their properties, such as high water absorbency. This can address the issues (such as high alkalinity and high carbon dioxide emissions) associated with cement- and lime-based stabilizers, which were previously widely used.

Assessment of submicron bone tissue composition in plastic-embedded samples using optical photothermal infrared (O-PTIR) spectral imaging and machine learning

Understanding the composition of bone tissue at the submicron level is crucial to elucidate factors contributing to bone disease and fragility. Here, we introduce a novel approach utilizing optical photothermal infrared (O-PTIR) spectroscopy and imaging coupled with machine learning analysis to assess bone tissue composition at 500 nm spatial resolution. This approach was used to evaluate thick bone samples embedded in typical poly(methyl methacrylate) (PMMA) blocks, eliminating the need for cumbersome thin sectioning. We demonstrate the utility of O-PTIR imaging to assess the distribution of bone tissue mineral and protein, as well as to explore the structure-composition relationship surrounding microporosity at a spatial resolution unattainable by conventional infrared imaging modalities. Using bone samples from wildtype (WT) mice and from a mouse model of osteogenesis imperfecta (OIM), we further showcase the application of O-PTIR spectroscopy to quantify mineral content, crystallinity, and carbonate content in spatially defined regions across the cortical bone. Notably, we show that machine learning analysis using support vector machine (SVM) was successful in identifying bone phenotypes (typical in WT, fragile in OIM) based on input of spectral data, with over 86% of samples correctly identified when using the collagen spectral range. Our findings highlight the potential of O-PTIR spectroscopy and imaging as valuable tools for exploring bone submicron composition.

Are Bacterial Communities and Aggregation in Fragile Soils Influenced by the Management System?

Light-textured soils are widely distributed globally and, despite their limitations, have been integrated into agricultural production systems. This study aimed to assess how management systems—conventional tillage (CT) and no-till (NT)—affect aggregate formation pathways (physicogenic and biogenic) and bacterial communities. Two management systems (NT and CT) and three cover crops were evaluated: CJ: Crotalária (Crotalaria juncea (40 kg ha-1); M: Millet (Pennisetum glaucum - 60 kg ha-1); and C: Cocktail (Crotalária - Crotalaria juncea - 10 kg ha-1, Jack bean - Canavalia ensiformis - 75 kg ha-1, and Millet - Pennisetum glaucum - 30 kg ha-1). Undisturbed soil samples were collected from the crop row at a depth of 0.00 to 0.10 m. Aggregates with diameters between 9.7 and 8.0 mm were classified as biogenic or physicogenic. In addition to the chemical attributes of the aggregates, total organic carbon (TOC) and its fractions (mineral-associated organic carbon, MAOC; particulate organic carbon, POC; and free light fraction carbon, FLFC) were quantified. The structure and bacterial composition of the aggregates were also characterized. A higher proportion of biogenic aggregates (53–64%) was observed compared to physicogenic aggregates (36–47%). Cover crops exhibited significant differences in pH, calcium (Ca2+), base saturation, phosphorous (P), and percentage of base saturation. The management systems differed significantly for Ca2+ and P, with CT showing higher values than NT. The management system influenced organic matter accumulation and stabilization in the aggregates, with MAOC content being significantly lower in CT. TOC and POC were also significantly lower in physicogenic aggregates under CT. Bacterial community richness, diversity, and structure were significantly influenced by the management system, with greater richness and diversity in NT compared to CT. Network analysis revealed NT had more nodes and edges (65 and 406, respectively) than CT (52 and 357, respectively. Phyla abundance differed between the systems, with Firmicutes and Entotheonellaeota more abundant in CT, while WPS_2, GAL15, Bdellovibrionota, and Myxococcota were more abundant in NT. Despite the relatively short period of NT implementation (5 years), it had a positive effect on the bacterial community, which may subsequently influence nutrient and carbon content and their fractions in the aggregates.

Passivation and depassivation of reinforcement steel in alkali-activated materials—A review

This paper reviews the formation and breakdown of passive film on the surface of reinforcement steel in alkali-activated materials (AAMs) considering the characteristics of reaction product and pore solution chemistry. The literature review shows that the pore solution of AAMs has higher concentrations of OH-, Na+, silica and aluminium compared to Portland cement (PC). This relatively high alkalinity contributes to the generation of a passive film, which has positive effects on the corrosion resistance of reinforcement steel embedded in AAMs. The silica-aluminium zeolite layer present on the surface of passive film adsorbs chloride ions and effectively inhibits chloride-induced depassivation. Generally, lower ratios of [Cl-]/[SO42-] and [Cl-]/[S2O32-] potentially inhibit the depassivation of reinforcement steel. The high pH value and the elevated concentrations of HS- of AAMs contribute to the increase of critical chloride content (Ccrit). However, the higher content of reduced sulfide mainly dissolved from slag results in the consumption of dissolved oxygen, which is necessary for the formation of passive film. Generally, the presence of reduced sulfide forms Fe-S complexes on the surface of reinforcement steel in AAMs. Even so, higher corrosion resistance for AAMs is mostly expected with longer depassivation time due to finer microstructure and lower chloride penetration rates compared to PC-based materials. The decrease in pH value in the pore solution of the AAMs is the main factor affecting carbonation-induced depassivation of reinforcement steel, while high concentrations of bicarbonate and carbonate ions inhibit depassivation.

Changes in Soil Bacterial and Fungal Community Composition and Functional Groups During the Artificial Restoration of Degraded Grassland of "Black-Soil Mountain".

About 35% of grassland in Sanjiangyuan area of China has degenerated into black-soil mountain. Artificial grassland is considered to be an effective measure to alleviate the severely degraded grassland in the alpine region of the three rivers and has been widely used. However, the pattern, potential function, and changes of carbon and nitrogen contents of soil microorganisms in degraded grassland in Heimushan by planting artificial grassland are still unclear. In this study, mixed-sown artificial alpine grassland (AG) was the focus of our study, whereas degraded black-soil mountain grassland (BG) and natural alpine grassland (NG) served as controls. Illumina 16S and ITS gene sequence analyses were used to analyze the community structure of the soil bacteria and fungi. The functional groups of NG, AG, and BG were predicted using the FAPROTAX and FUNGuild databases. In addition, the levels of soil carbon, nitrogen, and soil enzyme activities were evaluated. The results indicated a significant increase in the aboveground biomass of BG due to the planting artificial grassland. Moreover, the contents of total carbon (TC), total nitrogen (TN), ammonium nitrogen ( ), microbial biomass carbon (MBC), microbial biomass nitrogen (MBN), and leucine aminopeptidase (LAP) increased in the soil. Planting artificial grasslands changed the composition of bacterial and fungal communities. Among these, the bacterial community was more sensitive to planting artificial grasslands. The relative abundance of bacterial functional groups involved in carbon and nitrogen cycling changed significantly, suggesting that bacteria may play a role in regulating nutrient cycling during artificial grassland planting. Soil TC, TN, LAP, and affected the microbial community structure related to carbon and nitrogen. and β-1,4-glucosidase were carbon and nitrogen factors, respectively, that affected functional changes in fungi. These results indicate that planting artificial grasslands can effectively enhance the productivity of degraded black-soil mountain and regulate soil microbial communities and soil physical and chemical properties.

Fertilizer management practices for cassava in acid dryland of Sukabumi Regency, West Java

The productivity of cassava in acid dryland is generally still low. Fertilization, land amelioration, and superior varieties are the main solutions for increasing cassava productivity. This research aimed to determine the response of high-yielding varieties and fertilization technology packages to the growth and yield of cassava in acid dryland of Sukaharja Village, Warung Kiara District, Sukabumi Regency, West Java. The contents of organic carbon, nitrogen, and magnesium of the soil is below the minimum threshold, so the application of N fertilizer, organic matter, and ameliorant is expected to increase plant growth. The research consisted of two treatment factors: two cassava varieties and three fertilization technologies. The treatments were arranged in a completely randomized split-plot experimental design with three replications with variety as the main plot and fertilization technology package as the subplots. The treatment effect was observed on the character of plant height, wet biomass weight, stem diameter, number of tubers, tuber length, tuber diameter, tuber weight (large and small) per plant, and tuber yield per plot to be converted per ha. Tuber quality was observed by observing water content, percent dry matter, and starch yield. The results showed that the fertilization technology package increased plant height, fresh biomass weight, stem diameter, large tuber weight per plant, and yield per hectare in both varieties. Differences in varieties and fertilization technology packages have no effect on starch levels.

Exploring the relationship between personal exposure to multiple water-soluble components and ROS in size-resolved PMs in solid fuel combustion households

Water-soluble species are the main components of particulate matters (PMs), which have important impacts on visibility, climate change and human health. Here, personal exposure (PE) to size-resolved PMs from housewives using different solid fuels (biomass and coal) was collected during winter in rural Yuncheng city, Fenwei Plain, China. The concentrations of water-soluble organic carbon (WSOC) and reactive oxygen species (ROS) were higher in the biomass group than coal group, whereas the concentrations of water-soluble inorganic ions and water-soluble nitrogen were higher in the coal group than biomass group. Almost all measured water-soluble components in both groups showed a pattern of increasing concentration with decreasing particle size, with more than 50% of WSOC and water-soluble total nitrogen (WSTN) enriched in PM0.25. The Pearson correlation result was in general agreement with the relationship between water-soluble components and ROS found by random forest model. There was a strong positive correlation between ROS and WSOC in PMs in the coal group, especially in PMs < 0.25 μm, which may be due to the emission of a large number of transition metals chelated with WSOC from coal combustion. The contribution of Cl- and F- to ROS was greater in the biomass group. NO2- in both coal and biomass groups had a decent positive effect on ROS generation. The strongest positive linear correlation (R = 0.95) between ROS and K+ in total suspended particulates in the biomass group, whereas there was almost no contribution of K+ to ROS when particle size was distinguished or in random forest model, which reflects the specificity of K+ in inducing ROS. The present study provides new insights for a deeper exploration of the relationship between water-soluble components and oxidative potential in PE PMs from domestic combustion sources.

Spatial distribution of bacterial communities driven by environmental factors in the sediment of Lateolabrax japonicus ponds

Dynamic changes of bacterial communities in the sediment are very important for preventing diseases and water quality in aquaculture ponds. In this study, bacterial communities in the sediment of Sea perch Lateolabrax japonicus, an important farmed fish in China, ponds were studied using 16S rRNA Illumina sequencing and functional gene array. At the phylum level, Pseudomonadota, Actinomycetota and Chloroflexota were the dominant species. The bacterial community composition was different in spatial variation. Among the environmental factors, the concentration of nitrogen related factors (TN, NO3−-N NH3-N, NO2−N) and total organic carbon was the main impact on the composition of bacterial community, especially denitrifying bacterial community. Nitrifying and denitrifying bacteria accounted for 4.81 %, and bacteria related to nitrogen cycle accounted for 18.36 %. Higher diversity of bacteria in healthy fish pond than that of the diseased fish pond. In the diseased fish pond, lower abundance of Nitrosospira and higher abundance of Nitrobacter were found, and the contents of NH3-N, NO2−-N and total organic carbon were significantly higher. This study would help to reveal that microbial community structure could reflect the health of cultured animal and surroundings, and it could provide a theoretical reference for the healthy environments in the sediment of Sea perch ponds in South China.

Global Estimates of Particulate Organic Carbon Concentration From the Surface Ocean to the Base of the Mesopelagic

AbstractThe gravitational settling of organic particles from the surface to the deep ocean is an important export pathway and one of the largest components of the ocean carbon pump. The strength and efficiency of the gravitational pump are often measured using metrics reliant on reference depths and empirical formulations that parameterize the relationship between depth and the flux or concentration of particulate organic carbon (POC). Here, BGC‐Argo profiles were used to identify the isolume where POC concentration, [POC], starts to decline, revealing attenuation trends below this isolume that are remarkably consistent across the global ocean. We developed a simple empirical approach that uses observations from the first optical depth to predict [POC] from the surface ocean to the base of the mesopelagic (1,000 m), allowing assessments of spatial and temporal variability in gravitational pump efficiencies. We find that rates of [POC] attenuation are high in areas of high biomass and low in areas of low biomass, supporting the view that bloom events sometimes result in a relatively weak deep biological pump that is characterized by low transfer efficiency to the base of the mesopelagic. Our isolume‐based attenuation model was applied to satellite data to yield the first remote sensing‐based estimate of integrated global POC stock of 3.02 Pg C over the top 1,000 m, with an uncertainty of 0.69 Pg C. Of this total stock, approximately 1.02 Pg was located above the reference isolume where [POC] begins to attenuate.

Vermicomposting organic waste with Eisenia fetida using a continuous flow-through reactor: Investigating five distinct waste mixtures

In this study, the vermicomposting of source-separated organic solid waste was investigated using Eisenia fetida in a continuous flow-through reactor. This novel approach is capable of simulating the complex interactions and dynamics of a full-scale vermicomposting system, offering valuable insights into the optimization of organic waste management. The primary objective of the research was to evaluate the quality of vermicompost produced in the reactor and determine its compliance with regulatory standards. For this purpose, food waste, yard waste, and pruning waste were mixed in different proportions to create five waste mixtures, which were then subjected to an 8-week pre-composting process. Subsequently, vermicompost was produced from the pre-composted waste mixtures using a continuous flow-through reactor that allows for long-term operation without disturbing the worms. While the total Kjeldahl nitrogen (TKN) content of the vermicomposts ranged from 2.04% to 2.48%, the total organic carbon (TOC) content of the vermicomposts was between 25.68% and 32.64%. Therefore, the carbon/nitrogen (C/N) ratio was calculated to be between 12.60 and 13.66. The quality of the final compost product showed that it met the limitations suggested in the European Fertilizer Regulation for the main physico-chemical parameters and heavy metals. It is concluded that vermicomposting in a continuous flow-through system reactor would be applicable to different organic waste streams.

Influence of soil organic carbon fractions on the soil priming effect under different vegetation restoration modes

AbstractThe soil priming effect is a key mechanism influencing carbon (C) cycling processes between the forest soil organic carbon (SOC) pool and the atmosphere. Different vegetation restoration modes have different SOC pool compositions, and it is not clear whether such differences affect the soil priming effect. Therefore, we selected soil from six typical vegetation restoration modes Platycladus orientalis (PO), Pinus sylvestris (PS), Quercus acutissima (QA), shrub (SH) and wasteland (WL) in the soil and rocky mountainous areas of northern China and measured the soil properties, microbial communities, microbial necromass carbon (MNC), SOC fractions and the soil priming effect. The SOC content decreased in the order of PO (21.33 g kg−1), PS (22.00 g kg−1), QA (13.67 g kg−1), SH (13.33 g kg−1) and WL (10.33 g kg−1), and the trends of the mineral‐associated organic carbon (MAOC) and fungal necromass carbon (FNC) content were the same as those of the SOC content. The soil priming effect was greater in both forests and shrublands than in wastelands, with the greatest effect occurring in PO forests, where the soil priming effect reached 159.91 mg CO2‐C kg−1 soil after 30 days of incubation, which was 1.4 times greater than that in WL. The soil priming effect was mainly determined by the difference in MAOC content. In addition, the soil C/N ratio and bacterial community diversity also indirectly affected the soil priming effect by influencing the soil MNC and SOC fractions. Overall, afforestation increased the SOC content, fungal necromass contribution and mineral conservation, increasing the soil priming effect. This theoretical foundation supports the enhancement of SOC sequestration capacity by implementing various modes of vegetation restoration in the future.

Co-culture of rice and aquatic animals enhances soil organic carbon: A meta-analysis

Co-culture of rice (Oryza sativa) and aquatic animals (CRAAs) is an efficient eco-agricultural model and has been widely implemented in many Asia countries. However, its impact on soil organic carbon (SOC) content has not been synthesized and the relative effects of different CRAAs practices on SOC have not been assessed. Our meta-analysis aims to synthesize the effect of diverse CRAAs regimes on SOC content based on results from 200 field experiments. Our results showed that overall, CRAAs significantly increased SOC content by 11.6 % (P < 0.05). The highest relative effect on SOC content was found under the rice and amphibian coculture (P < 0.05). Also, CRAAs increased SOC content more significantly in temperate regions (19.1 %) than in subtropical (9.7 %) and tropical (12.1 %) regions (P < 0.05). In addition, CRAAs were more effective in enhancing SOC content in paddy soils with high nitrogen content (total nitrogen [TN] >1.2 g·N kg−1 soil) or alkaline soils. Further, SOC increased more in the CRAAs with japonica than indica rice, increasing 17.8 % and 6.1 % as compared to their respective rice-monoculture controls. Random forest analysis revealed that animal type was the most important factor influencing SOC under CRAAs. Together, these results indicate that CRAAs can significantly enhance SOC, particularly in low-N, alkaline paddy soils. Our findings suggest that CRAAs with appropriate rice and animal varieties can provide unique opportunities for soil C sequestration, while enhancing farmers' profitability.

Aluminium Bioavailability and Toxicity Disrupted Chloroplast Structure and Inhibited Inorganic Carbon Utilization and Nutrient Uptake in Vallisneria natans at Acidic and Alkaline pH

Vallisneria natans, as submerged aquatic plants, face significant threats from aluminium (Al) toxicity. While the effects of Al at low pH on terrestrial plants have been extensively studied, there is a lack of research on the impacts of both low and high pH on chloroplast ultrastructure and nutrient uptake in submerged plants. This research is important as it aims to fill this gap by exposing the leaves of Vallisneria natans to 100 uM Al at varying pH levels (4.5, 5.5, 7.5, and 9.5) for 48hours. The results showed that inorganic carbon (CT), CO2, and HCO3 content increased at extreme pH levels (4.5 and 9.5), suggesting decreased inorganic carbon utilization under Al stress. Additionally, photosystem II efficiency and electron transport rate were significantly reduced at extreme pH levels, highlighting the sensitivity of V. natans to Al. Chlorophyll a and total chlorophyll content were significantly lower at pH 4.5 compared to pH 7.5. Chloroplast structural disruptions were evident at extreme pH levels coupled with Al exposure, whereas minimal injury was observed at pH 5.5 and 7.5. The study also noted vacuole enlargement, altered plasma membrane permeability, and hematoxylin staining, indicating Al accumulation in leaves. ICP analysis revealed increased Al content at extreme pH levels, underscoring heightened Al bioavailability and toxicity. Significant reductions in macro and micronutrient content (P, Mg, K, Fe, Zn, B, Mn) were observed, likely due to Al-induced root and cell damage and altered nutrient uptake. These findings emphasize the complex interplay between Al exposure, pH fluctuations, and their cascading effects on the physiology and elemental composition of Vallisneria natans, highlighting the need for further research and environmental management strategies.

Molecular properties of dissolved organic matter leached from microplastics during photoaging process

The occurrence of dissolved organic matter (DOM) derived from microplastics (MPs) and its effect on aquatic systems has attracted great interest recently. However, the photoaging effect on the molecular structure of MP-derived DOM (MP-DOM) remains unclear. This paper presents the characteristics of DOM leached from three commercial MPs, i.e., polyethylene (PE), polypropylene (PP) and polyethylene terephthalate (PET) under UV irradiation. With prolonged aging periods, the surface roughness and oxygen-containing groups on the surface of MPs increase as more DOM leachate is generated. Moreover, the dissolved organic carbon (DOC) content of the leached DOM from PET MPs varies from 0.52mg/L to 2.25mg/L, which is higher than PE and PP MPs, due to the larger increased surface reaction area and the cleavage of the benzene ring. According to the excitation-emission matrix and parallel factor analysis (EEM-PARAFAC), the plastic-derived protein/phenolic-like components (C1 and C3) in MP-DOM were changed into photo-induced humic-like components (C2), which were closely related to the intermediates during photo-oxidation. High-performance liquid chromatography-mass spectrometry (HPLC−MS) analysis further identified that the highest proportion of antioxidants (24.8%~34.6%) was contained in MP-DOM. Plasticizers, intermediate additives, and antimicrobial agents were also detected in DOM leachate. Correlation analysis identified that the composition of leached DOM was positively correlated with the surface roughness, the carbonyl index (CI), and the chemical groups of MPs. Moreover, a partial least square structural equation model (PLS−SEM) analysis further verified that the change of morphology and the chemical structure of MPs could affect the DOM structures and fractions directly. This study provides an in-depth understanding of the composition of MP-derived DOM during the aging process, as well as a comprehensive environmental impact assessment of MPs.

Precipitation changes during the last glacial period in the Ili Basin, northern Central Asia, as inferred from the records of loess dolomite

Understanding the climatic evolution in Central Asia (CA) and its drivers is crucial for informed decision-making and predicting global changes due to its significant contribution as a global dust source. Unfortunately, our current understanding of the pre-Holocene precipitation patterns in CA is lacking due to the limited availability of reliable proxy indicators, and our knowledge of future precipitation projections in the region, based on paleoclimatic dynamics, is also quite limited. In this study, we analyzed variations in carbonate and dolomite contents of a loess section in the Ili Basin, northern CA, to understand precipitation changes during the last glacial period. The results showed that changes in carbonate minerals were mainly influenced by the source material supply, driven by reduced precipitation and eluviation during glacial period. We thereby established a precipitation index by removing the influence of provenance signals from the dolomite records. The index indicated lower precipitation during mid-marine isotope stage (MIS) 3 compared to MIS2, likely due to meridional shifts and intensity changes of the westerlies caused by changes in precession and obliquity, with precession playing a major role. Through the comparison of the precipitation index with the δ18O records of the Greenland ice core on a millennial timescale, it was observed that the precipitation in northern CA exhibited a positive correlation with the North Atlantic Oscillation (NAO) mode due to migration of the westerlies. By leveraging our understanding of orbital- and millennial-scale precipitation patterns, we utilized the random forest (RF) regression model and the autoregressive integrated moving average model to forecast precipitation changes for the upcoming 5000–10,000 years. The results indicated a variable pattern marked by a general upward trend, suggesting the possibility of favorable development of agricultural-based economies in the Ili River Valley. People should realize that some integrated measures are designed to improve resilience of agricultural sector in the region and enhance its capacity to adapt to challenges posed by climate change. However, more extensive research is necessary to verify these results through thorough examination and comparisons of loess sections in our research location.

Evolution of solid residue composition during inert and oxidative biomass torrefaction

Biomass torrefaction is a thermochemical pretreatment that can be used to improve biomass properties, contributing to the energy densification of biomass or increasing its grindability, burning and gasification characteristics, porous structure, etc. While it is typically carried out under inert conditions, oxygen-lean torrefaction of biomass can reduce the process cost and complexity. This work proposes a novel extended 2-step kinetics mechanism capable of accurately predicting the evolution of the chemical composition of torrefied biomass. The model parameters are obtained from data collected from an extensive experimental campaign in which the chemical composition of torrefied biomass was measured at different temperatures, residence times, and oxygen fractions. The carbon mass fraction of the torrefied products was found to increase by up to 50% under severe inert torrefaction conditions, i.e., high temperatures and long residence times, whereas the hydrogen fraction decreased. In the presence of oxygen during torrefaction, the carbon and hydrogen contents in the solid residue decrease compared with those produced under inert torrefaction. The extended 2-step model can also be used to determine the high heating value and energy densification of the torrefied biomass, with the latter ranging from 1 to 1.4 for the operating conditions tested.

LITERATUR STUDI MENGENAI ADSORBEN LIMBAH CANGKANG HEWAN LAUT DALAM BERBAGAI KEILMUAN

The utilization of marine animal waste as a base material for adsorbents has become an increasingly popular research topic across various scientific fields, including chemistry, environmental science, and materials science. Waste from marine animals, such as crab shells, oyster shell, seashell, and shrimp shell, possesses high potential to be processed into adsorbents due to their abundant calcium carbonate, chitosan, and protein content. The use of this waste as adsorbents not only provides a solution to environmental issues related to the accumulation of organic waste but also offers cheaper and eco-friendly alternative for water treatment, air purification, and contaminated soil remediation. Research has shown that marine animal waste-based adsorbents are effective in removing various pollutants, including heavy metals, textile dyes, and hazardous organic compounds. With specific modification techniques, the performance of these adsorbents can be enhanced, making them competitive with commercial adsorbents. Overall, the use of marine animal waste as adsorbents represents an innovative approach that contributes to waste reduction and the enhancement of environmental sustainability.

Impacts of anthropogenic resuspension on sediment organic matter: an experimental approach

Globally coastal sediments are frequently disturbed by a wide range of physical anthropogenic processes (e.g. bottom trawling) which causes resuspension of sediment organic matter (OM) into the overlaying water column. In this study we present experimental results showing that anthropogenic sediment resuspension decreases the organic carbon (14x) and nitrogen (3x) content in the sediment material resuspended to the water column, while no measurable response was found for organic phosphorus. Our findings further suggest that the OM bioavailability decreased and the Carbon:Nitrogen:Phosphorus stoichiometry was changed suggesting that anthropogenic resuspension changes the chemical composition, and/or production and degradation pathways of the OM pool. The detected changes in OM biogeochemistry could affect nutrient release, fuel oxygen depletion and at the same time increase CO2 production in coastal waters.