Carbon Source Consumption Research Articles

Transforming the energy system? Technology and organisational legitimacy and the institutionalisation of community renewable energy

Community renewable energy promises to play an important role in reducing the generation and consumption of high carbon sources of power, as well as in demonstrating the viability of novel business models within a transformed energy system built on principles of locality and democracy. The paper argues, however, that community renewable energy, in England at least, remains marginal, undermined by changing government policies and underplayed institutional factors connected with technology and organisational legitimacy. The paper reports on interviews with 29 actors connected with community renewable energy in England. The analysis identifies themes implicating various types of legitimacy with the partial and uneven institutionalisation of community renewable energy. These are bound up with continuing and new institutional rules and the deployment of strategies for (de)legitimising community renewable energy, including associated technologies and organisational forms, adversely impacting on the potential contribution of community renewable energy to energy system transformation.

Enhanced phosphorus storage in suspended biofilm by increasing dissolved oxygen

The phosphorus recovery efficiency in PAOs-biofilm system is so far limited to stimulating phosphorus release by adding concentrated organic carbon solution during the anaerobic stage. In present study, a PAOs-biofilm sequence batch reactor (BSBR) were operated to investigate whether increase of the phosphorus storage content via DO control can stimulate the release in the biofilm. During the operation of BSBR for 160 days, the phosphorus content in biofilm (Pbiofilm) was doubled via increasing dissolved oxygen (DO) from 4 to 6 mg/L. With the COD of 200 mg/L in the anaerobic phase, the phosphorus release was enhaced, resulting in an significant increase of phosphorus concentration from 94.85 to 179.5 mg/L in recirculated solution. Batch tests further clarified explicitly the increase of Pbiofilm stimulated a phosphorus release rate but this must be balanced since high Pbiofilm reduced the phosphorus removal capacity of the biofilm. With analysis of P31-NMR, Ortho-P and Poly-P were the main phosphorus species stored in biofilm. The microbial cell played a more important role than EPS in phosphorus storage. The dominant phylum in the master reactor was Proteobacteria with an abundance of 64.4%, in which the Rhodocyclaceae was the dominant PAOs with an abundance of 10.1%. The outcome of this study elucidated that increase of phosphorus storage via DO control which facilitated more efficient phosphorus release with much lower organic carbon source consumption during the enrichment of phosphorus. Meanwhile, we provided a new perspective for the recovery of phosphorus in future wastewater treatment plants.

Single Cell Oil Production by Wild Type Strain Lipomyces starkeyi Y604

As one of the promising oleaginous yeast, Lipomyces starkeyi has emerged as a great candidate of a single cell oil (SCO) producer. This is due to its ability to accumulate high lipid content and its ability to consume a diverse carbon sources. However, lipid production of the wild type strain is limited and efforts to obtain high producing wild-type strain are demanded. For this purpose, we conducted fermentation of the local wild-type strain of L. starkeyi InaCC Y604, derived from the collections of Indonesian Culture Collection (InaCC). In this study, we employed glucose, xylose, and a combination of glucose and xylose as carbon sources and conducted the fermentation in the batch flask scale. Following the fermentation, parameters such as dry cell weight (DCW), carbon source consumption, SCO production, lipid content and lipid yield were determined. In this study, we obtained that L. starkeyi InaCC Y604 grown in medium contained a mixture of glucose (50 g/L) and xylose (50 g/L) accumulate highest SCO production with 57.04±0.94 g/L and its lipid content reached out 0.17±0.00 w/w. Despite the result is not the best among previous reported literatures, this shows that the Indonesian local strain L. starkeyi InaCC Y604 can be a promising candidate to be further optimized.

Metabolic perturbations in mutants of glucose transporters and their applications in metabolite production in Escherichia coli

BackgroundMost microorganisms have evolved to maximize growth rate, with rapid consumption of carbon sources from the surroundings. However, fast growing phenotypes usually feature secretion of organic compounds. For example, E. coli mainly produced acetate in fast growing condition such as glucose rich and aerobic condition, which is troublesome for metabolic engineering because acetate causes acidification of surroundings, growth inhibition and decline of production yield. The overflow metabolism can be alleviated by reducing glucose uptake rate.ResultsAs glucose transporters or their subunits were knocked out in E. coli, the growth and glucose uptake rates decreased and biomass yield was improved. Alteration of intracellular metabolism caused by the mutations was investigated with transcriptome analysis and 13C metabolic flux analysis (13C MFA). Various transcriptional and metabolic perturbations were identified in the sugar transporter mutants. Transcription of genes related to glycolysis, chemotaxis, and flagella synthesis was downregulated, and that of gluconeogenesis, Krebs cycle, alternative transporters, quorum sensing, and stress induced proteins was upregulated in the sugar transporter mutants. The specific production yields of value-added compounds (enhanced green fluorescent protein, γ-aminobutyrate, lycopene) were improved significantly in the sugar transporter mutants.ConclusionsThe elimination of sugar transporter resulted in alteration of global gene expression and redirection of carbon flux distribution, which was purposed to increase energy yield and recycle carbon sources. When the pathways for several valuable compounds were introduced to mutant strains, specific yield of them were highly improved. These results showed that controlling the sugar uptake rate is a good strategy for ameliorating metabolite production.

Variations and environmental impacts of odor emissions along the waste stream

Odor nuisance related to municipal solid waste (MSW) disposal is one of the main incentives to counter the Not-In-My-Backyard Syndrome. Moreover, integrated odor management contributes to specific odor control at different waste treatment stages. In this study, odor emissions along typical MSW streams were categorized based on their olfactive and environmental impacts after a field investigation of the residential district (RD), transfer station (TS), and landfill (LF) in the Chongming Eco-island. It was found that odorants, especially NH3 and sulfides, increased along the MSW stream, with total chemical concentration increasing from 1241.5 ± 235.6 to 6947.2 ± 1726.8 μg/m3. Source separation and co-landfill system, which premixes the MSW with bottom ash (BA) at a ratio of 5:1, were speculated to efficiently attenuate odorants. Sulfides reduced owing to an increase in trace metal dissolution and carbon source consumption with the addition of BA at the LF, whereas NH3 in the leachate pond increased due to enhanced biodegradation and alkalinity. Photochemical ozone formation (6.7 × 10−8–8.6 × 10−5 personal equivalent, PE), nutrient enrichment (5.4 × 10−8–4.6 × 10−5 PE), and acidification (4.8 × 10−8–4.1 × 10−5 PE) were the major environmental impact categories. The priority odor pollutants screened using ternary fuzzy synthetic system could reflect the impact of olfaction and environment and greatly varied along the waste stream.

Genome-wide sequencing and metabolic annotation of Pythium irregulare CBS 494.86: understanding Eicosapentaenoic acid production

BackgroundPythium irregulare is an oleaginous Oomycete able to accumulate large amounts of lipids, including Eicosapentaenoic acid (EPA). EPA is an important and expensive dietary supplement with a promising and very competitive market, which is dependent on fish-oil extraction. This has prompted several research groups to study biotechnological routes to obtain specific fatty acids rather than a mixture of various lipids. Moreover, microorganisms can use low cost carbon sources for lipid production, thus reducing production costs. Previous studies have highlighted the production of EPA by P. irregulare, exploiting diverse low cost carbon sources that are produced in large amounts, such as vinasse, glycerol, and food wastewater. However, there is still a lack of knowledge about its biosynthetic pathways, because no functional annotation of any Pythium sp. exists yet. The goal of this work was to identify key genes and pathways related to EPA biosynthesis, in P. irregulare CBS 494.86, by sequencing and performing an unprecedented annotation of its genome, considering the possibility of using wastewater as a carbon source.ResultsGenome sequencing provided 17,727 candidate genes, with 3809 of them associated with enzyme code and 945 with membrane transporter proteins. The functional annotation was compared with curated information of oleaginous organisms, understanding amino acids and fatty acids production, and consumption of carbon and nitrogen sources, present in the wastewater. The main features include the presence of genes related to the consumption of several sugars and candidate genes of unsaturated fatty acids production.ConclusionsThe whole metabolic genome presented, which is an unprecedented reconstruction of P. irregulare CBS 494.86, shows its potential to produce value-added products, in special EPA, for food and pharmaceutical industries, moreover it infers metabolic capabilities of the microorganism by incorporating information obtained from literature and genomic data, supplying information of great importance to future work.

Metabolic flux analysis during galactose and lactate co-consumption reveals enhanced energy metabolism in continuous CHO cell cultures

Chinese Hamster Ovary (CHO) cells are the main expression system for production of therapeutic recombinant (r-) proteins. The increased demand for these therapeutics has boosted the development of more robust production processes. Use of optimised feed/media has dramatically improved the performance of CHO cells in culture. However, such progress in biomass synthesis and r-protein production often come with an increased accumulation of lactate. In this study, we present a combined feeding strategy that uses galactose and lactate to replace glucose in CHO cell cultures. Replacement of glucose by galactose and lactate sustained cell growth and r-protein production in CHO cells. This strategy supported a better-balanced and more efficient metabolism, observed by an overall decreased consumption of carbon sources and amino acids, associated with an increased ATP production per C-mol consumed. Our results provide new insights of CHO cell metabolism in glucose-free media based on galactose and lactate.

Impact of Resistant Maltodextrins and Resistant Starch on Human Gut Microbiota and Organic Acids Production

This study is conducted to elucidate the effect of differently engineered resistant maltodextrin (RMD) and resistant starch (RS) on human intestinal microbiotal fermentation. Different types of RMD and RS are used as the sole carbon sources for bacteria in feces from healthy volunteers. The cultured samples are analyzed for changes in microbial groups from which the prebiotic index (PI) is calculated. The metabolic activity of the microbiotal communities is monitored by efficiency of carbon utilization and short chain fatty acid (SCFA) profiling. Bifidobacteria and lactobacilli are found to be increased whereas clostridia (histolyticum subgroup) and bacteroides are decreased. RMD is more efficiently utilized than RS showing up to 78% of carbon source consumption. Utilization of RS provides the highest content of propionic and butyric acid while RMD shows a higher content of acetic and lactic acid. RMD and RS show a superior PI compared to that of glucose. Different types of molecular stearic hindrances, configurational hindrance for RMD, and conformational/aggregational hindrance for RS, prevent their hydrolytic utilization, directly influencing the human gut microbiotal composition and/or fermentation capability in different manners. RMD demonstrates the highest acetic acid content while RS3 and RS4 provide the highest butyric acid content.

Colorimetric assay for active biomass quantification of Fusarium fujikuroi

A colorimetric assay has been developed for quantitative analysis of active biomass of Fusarium fujikuroi, based on the reduction of the tetrazolium salt 2,3-Bis-(2-methoxy-4-nitro-5-sulfophenyl)-2H-tetrazolium-5-carboxanilide (XTT) when menadione was present as an electron coupling agent. The optimum assay-conditions were set as 200 μg/ml XTT, 5 μM menadione and one-hour reaction time. Under these settings, the produced formazan displayed a linear relationship with F. fujikuroi biomass. This method was subsequently applied to evaluate the cell growth behavior, which showed a positive correlation with the carbon source consumption and gibberellin biosynthesis under the industrial fermentation conditions. Our results showed that the XTT-menadione assay is a valuable tool in analyzing the industrial fermentation process of F. fujikuroi, especially when the medium contains insoluble and complex components.

Carbon Consumption Patterns of Microbial Communities Associated with Peltigera Lichens from a Chilean Temperate Forest.

Lichens are a symbiotic association between a fungus and a green alga or a cyanobacterium, or both. They can grow in practically any terrestrial environment and play crucial roles in ecosystems, such as assisting in soil formation and degrading soil organic matter. In their thalli, they can host a wide diversity of non-photoautotrophic microorganisms, including bacteria, which play important functions and are considered key components of the lichens. In this work, using the BioLog® EcoPlate system, we studied the consumption kinetics of different carbon-sources by microbial communities associated with the thallus and the substrate of Peltigera lichens growing in a Chilean temperate rain forest dominated by Nothofagus pumilio. Based on the similarity of the consumption of 31 carbon-sources, three groups were formed. Among them, one group clustered the microbial metabolic profiles of almost all the substrates from one of the sampling sites, which exhibited the highest levels of consumption of the carbon-sources, and another group gathered the microbial metabolic profiles from the lichen thalli with the most abundant mycobiont haplotypes. These results suggest that the lichen thallus has a higher impact on the metabolism of its microbiome than on the microbial community of its substrate, with the latter being more diverse in terms of the metabolized sources and whose activity level is probably related to the availability of soil nutrients. However, although significant differences were detected in the microbial consumption of several carbon-sources when comparing the lichen thallus and the underlying substrate, d-mannitol, l-asparagine, and l-serine were intensively metabolized by both communities, suggesting that they share some microbial groups. Likewise, some communities showed high consumption of 2-hydroxybenzoic acid, d-galacturonic acid, and itaconic acid; these could serve as suitable sources of microorganisms as bioresources of novel bioactive compounds with biotechnological applications.

FORMATION OF NANO STRUCTURES IN RESULT OF HOMOGENOUS NUCLEATION OF CARBON OBTAINED IN THERMAL PLASMA UNDER ATMOSPHERIC PRESSURE

Thermal plasma processing of carbon sources using a plasma jet with high heat capacity is one of the most promising methods for the synthesis of new materials. This paper describes the low-temperature deposition of carbon nanomaterials by remote plasma-enhanced chemical vapor deposition (PECVD) in the absence of catalysts. The remote PECVD process differs from conventional and direct PECVD process in two ways: (a) only a subset of the process reactants and/or diluents are directly plasma excited; and (b) thin film deposition takes place on a substrate that is outside of the plasma glow region. In conventional CVD methods, carbon is produced from the decomposition of carbon sources such as hydrocarbons, carbon monoxide, alcohols, and so on, over a metal catalyst. The unavoidable metal species remaining in carbon nanomaterials would lead to obvious disadvantages for property characterization and application exploration. Despite sustained efforts, it is still an intractable problem to remove metal catalysts completely from carbon nanomaterials samples without introducing defects and contaminations. Good reactor design allowed to overcome problems of chemical and structural purity, and poor process robustness in terms of phase composition of product from run to run. For the synthesis of graphene materials, carbon black, carbon nanotubes, nanowires we used the thermal plasma generator which is a high current divergent anode-channel DC plasma torch. The experiment involved a simultaneous input of hydrocarbons (methane, propane, butane, acetylene) with the plasma forming gas (helium, argon, nitrogen) into the plasma torch, wherein heating and decompositions occurred in the plasma jet and in the region of the arc discharge, followed by condensation of the synthesis product on metallic surfaces. The deposition rate was varied with distance from the plasma. Consumption of carbon source, plasma forming gas and plasma torch power were changed independently from each other. For the experimental conditions the electric power of plasma torch was set up to 40 kW. Regularities of formation of carbon thread-like nanostructures and graphene in the course of hydrocarbons pyrolysis in thermal plasma without participation of catalytic particles were studied by means of electron microscopy, X-ray diffraction, IR-spectrometry and thermogravimetry. Depending on the pyrolytic synthesis parameters, different proportions of crystal carbon and soot may be obtained. It has been demonstrated that the phase composition is varied by hydrocarbons flow rate, plasma forming gas pressure and dc plasma torch power. It has been established through the experiments that carbon nucleation is volumetric and proceeds according to the model of explosive soot formation.

Online measurement of the respiratory activity in shake flasks enables the identification of cultivation phases and patterns indicating recombinant protein production in various Escherichia coli host strains.

Escherichia coli is commonly used for recombinant protein production with many available host strains. Screening experiments are often performed in batch mode using shake flasks and evaluating only the final product concentration. This conventional approach carries the risk of missing the best strain due to limited monitoring capabilities. Thus, this study focuses on investigating the general suitability of online respiration measurement for selecting expression hosts for heterologous protein production. The oxygen transfer rate (OTR) for different T7-RNA polymerase-dependent Escherichia coli expression strains was compared under inducing and noninducing conditions. As model enzymes, a lipase A from Bacillus subtilis (BSLA) and a 3-hydroxybutyryl-CoA dehydrogenase from Thermus thermophilus (HBD) were chosen. Four strains were compared during expression of both enzymes in autoinduction medium. Additionally, four strains were compared during expression of the BSLA with IPTG induction. It was found that the metabolic burden during recombinant protein production induces a phase of constant OTR, while undisturbed cell growth with no or little product formation is indicated by an exponential increase. This pattern is independent of the host strain, expressed enzyme, and induction method. Furthermore, the OTR gives information about carbon source consumption, biomass formation, and the transition from production to noninduced second growth phase, thereby ensuring a fair comparison of different strains. In conclusion, online monitoring of the respiration activity is suited to qualitatively identify, if a recombinant protein is produced by a strain or not. Furthermore, laborious offline sampling is avoided. Thus, the technique is easier and faster compared to conventional approaches. © 2018 American Institute of Chemical Engineers Biotechnol. Prog., 34:315-327, 2018.

The biotechnological production of xanthan on vegetable oil industry wastewaters (part II): Kinetic modelling and process simulation

Xanthan is a microbial biopolymer with a wide range of industrial applications and it is expected that the demand for this product will significantly increase in the coming decade and for this reason it is important to constantly work on improving all aspects of this biotechnological process. The aim of this research was to examine the kinetics of batch cultivation of Xanthomonas campestris ATCC 13951 using vegetable oil industry wastewaters as a basis for the cultivation medium, in order to produce the biopolymer xanthan. Kinetic modelling is very important for process control, reducing process costs and increasing product quality. By performing xanthan production on a medium with optimized content, the experimental values of content of biomass, carbon source and the desired product were obtained and used to determine the kinetics of biosynthesis. In order to describe biomass multiplication, product formation and carbon source consumption, the logistics, the Luedeking-Piret and modified Luedeking- -Piret equation, respectively, were successfully used. Additionally, using process simulation software (SuperPro Designer?), a process and cost model for a xanthan production facility was developed. The developed model represents the basis for a 21,294.29 and 23,107.97 kg/year xanthan production facility, which uses a vegetable oil industry wastewater-based medium and a semi-synthetic medium. The simulation model of the suggested xanthan production process, developed and based on defined kinetic models, represents an excellent basis for its further improvement and for increasing its efficiency.

Freshwater quality of a stream in agricultural area where organic compost from animal and vegetable wastes is used

ABSTRACT Organic compost from biomass residues constitutes a viable alternative for partial or total replacement of mineral fertilizers for growing vegetables. This study evaluated the effects of compost on the water quality of a stream used mainly for irrigation of agricultural crops cultivated in nearby soil that has been treated with organic compost produced by carcasses, animal and vegetable waste for the last ten years. We sampled water biannually for two years, 2013 and 2014, from five locations along the stream. Physical variables and some chemical variables were analyzed. We also analyzed the total number of coliforms (Escherichia coli). Bacterial populations were compared by carbon substrate consumption. Total phosphorus contents in the samples from 2014 exceeded 0.1 mg L-1. The concentrations of other chemical species analyzed and the results for the physical variables were in accordance with the expected values compared with national and international water quality standards. The environment showed differential carbon source consumption and a high diversity of microorganisms, but our results did not show any evidence that the applied compost is changing the microbial population or its metabolic activity. This study shows that the use of the organic compost in agricultural areas seen does not negatively influence the quality of surface water in the study area. These results are important because the process of composting animal and vegetable waste and the use of compost obtained can be an alternative sustainable for adequate destination of these wastes.

Carbon utilization profiles of river bacterial strains facing sole carbon sources suggest metabolic interactions

Microbial communities play a key role in water self-purification. They are primary drivers of biogenic element cycles and ecosystem processes. However, these communities remain largely uncharacterized. In order to understand the diversity-heterotrophic activity relationship facing sole carbon sources, we assembled a synthetic community composed of 20 'typical' freshwater bacterial species mainly isolated from the Zenne River (Belgium). The carbon source utilization profiles of each individual strain and of the mixed community were measured in Biolog Phenotype MicroArrays PM1 and PM2A microplates that allowed testing 190 different carbon sources. Our results strongly suggest interactions occurring between our planktonic strains as our synthetic community showed metabolic properties that were not displayed by its single components. Finally, the catabolic performances of the synthetic community and a natural community from the same sampling site were compared. The synthetic community behaved like the natural one and was therefore representative of the latter in regard to carbon source consumption.

Shifts in soil microbial metabolic activities and community structures along a salinity gradient of irrigation water in a typical arid region of China

Saline water irrigation can change soil environment, which thereby influence soil microbial process. Based on a field experiment, the shifts in soil microbial metabolic activities and community structures under five irrigation salinities were studied using Biolog and metagenomic methods in this study. The results demonstrated that microbial metabolic activities were greatly restrained in saline water irrigated soils, as average well color development (AWCD) reduced under all saline water irrigation treatments. Although no significant difference in carbon substrate utilization of all six categories was observed among Mild, Medium, High and Severe treatments, the consumption of sole carbon source was significantly varied. Especially, asparagine, galacturonic, putrescine and 4-benzoic acid played a decisive role in dominating the differences. Soil bacterial richness and diversity increased with irrigation salinity while the number of bacterial phyla decreased. Three significantly increased (Proteobacteria, Actinobacteria and Chloroflexi), two decreased (Planctomycetes, Bacteroidetes) and two irresponsive (Gemmatimonadetes and Acidobacteria) phyla were observed as the dominant groups in saline water irrigated soils. The results presented here could improve the understanding of the soil biological process under saline circumstance.

Simulation of Microbial Depolymerization Process with Exponential Consumption of Carbon Source

Mathematical techniques were applied to a microbial depolymerization process of exogenous type. Experimental results were incorporated into analysis, and a microbial depolymerization process of polyethylene glycol was simulated. Inverse problems for molecular factor and time factor of a degradation rate are described and numerical techniques are illustrated.

Impact of microbial communities from tropical soils on the mobilization of trace metals during dissolution of cinnabar ore

Biodissolution experiments on cinnabar ore (mercury sulphide and other sulphide minerals, such as pyrite) were performed with microorganisms extracted directly from soil. These experiments were carried out in closed systems under aerobic and anaerobic conditions with 2 different soils sampled in French Guyana. The two main objectives of this study were (1) to quantify the ability of microorganisms to mobilize metals (Fe, Al, Hg) during the dissolution of cinnabar ore, and (2) to identify the links between the type and chemical properties of soils, environmental parameters such as season and the strategies developed by indigenous microorganisms extracted from tropical natural soils to mobilize metals. Results indicate that microbial communities extracted directly from various soils are able to (1) survive in the presence of cinnabar ore, as indicated by consumption of carbon sources and, (2) leach Hg from cinnabar in oxic and anoxic dissolution experiments via the acidification of the medium and the production of low molecular mass organic acids (LMMOAs). The dissolution rate of cinnabar in aerobic conditions with microbial communities ranged from 4.8×10−4 to 2.6×10−3μmol/m2/day and was independent of the metabolites released by the microorganisms. In addition, these results suggest an indirect action by the microorganisms in the cinnabar dissolution. Additionally, because iron is a key element in the dynamics of Hg, microbes were stimulated by the presence of this metal, and microbes released LMMOAs that leached iron from iron-bearing minerals, such as pyrite and oxy-hydroxide of iron, in the mixed cinnabar ore.

Stereoselective Behavior of the Fungicide Benalaxyl During Grape Growth and the Wine-Making Process.

Benalaxyl is widely applied as a fungicide during grape planting processing. In this experiment, the stereoselective behavior of benalaxyl was studied during the grape growth and wine-making process. A simple method based on high-performance liquid chromatography (HPLC) equipped with a chiral column and UV detector was established to separate and determine the enantiomers of benalaxyl. Stereoselective degradation of the two enantiomers of benalaxyl was found in grapes. The degradation of both enantiomers followed pseudofirst-order kinetics, and the degradation rate of R-(-)-benalaxyl was faster than S-(+)-benalaxyl. The half-life of R-(-)-benalaxyl was 27h, while the half-life of S-(+)-benalaxyl was 31h. The enantiomer fraction value decreased from 0.50 to 0.34 and finally only S-(+)-benalaxyl could be detected. In the fermentation process, both enantiomers of benalaxyl were hardly degraded, and no configuration interconversion was observed. Meanwhile, both enantiomers of benalaxyl showed little influence on the growth of the yeast, consumption of carbon sources, or production of alcohol. The result of this study might provide more sufficient data for the evaluation of food safety and potential risk. Chirality 28:394-398, 2016. © 2016 Wiley Periodicals, Inc.

Influence of oxygen transfer on Pseudomonas putida effects on growth rate and biodesulfurization capacity.

The growth rate and desulfurization capacity accumulated by the cells during the growth of Pseudomonas putida KTH2 under different oxygen transfer conditions in a stirred and sparged tank bioreactor have been studied. Hydrodynamic conditions were changed using different agitation conditions. During the culture, several magnitudes associated to growth, such as the specific growth rate, the dissolved oxygen concentration and the carbon source consumption have been measured. Experimental results indicate that cultures are influenced by the fluid dynamic conditions into the bioreactor. An increase in the stirrer speed from 400 to 700 rpm has a positive influence on the cell growth rate. Nevertheless, the increase of agitation from 700 to 2000 rpm hardly has any influence on the growth rate. The effect of fluid dynamics on the cells development of the biodesulfurization (BDS) capacity of the cells during growth is different. The activities of the intracellular enzymes involved in the 4S pathway change with dissolved oxygen concentration. The enzyme activities have been evaluated in cells at several growth time and different hydrodynamic conditions. An increase of the agitation from 100 to 300 rpm has a positive influence on the development of the overall BDS capacity of the cells during growth. This capacity shows a decrease for higher stirrer speeds and the activity of the enzymes monooxygenases DszC and DszA decreases dramatically. The highest value of the activity of DszB enzyme was obtained with cells cultured at 100 rpm, while this activity decreases when the stirrer speed was increased higher than this value.