Concentrations Of Hydrocarbons Research Articles

Autochthonous bioaugmentation strategies for the successful bioremediation of high-salt petrochemical wastewater using a biosurfactant-producing Enterobacter cloacae Z11

Petrochemical wastewater contains a high concentration of refractory aliphatic and aromatic hydrocarbons. Bioremediation of these hazardous materials using autochthonous bioaugmentation (ABA) strategy is attracting increasing interest. Herein, an indigenous biosurfactant-producing bacteria Z11 was isolated and identified as Enterobacter sp. The reintroduction of Z11 into petrochemical wastewater led to a substantial reduction (P < 0.01) in TPHs, decreasing from 8099 to 1723 mg/L, as well as a significant decrease in COD, decreasing from 8064.2 to 1689.2mg/L. At a critical micelle concentration of 200mg/L, the biosurfactant synthesized by Z11 exhibited an extraordinary decrease in surface tension from 67.5 to 29 mN/m. The biosurfactant demonstrated favorable surface activity over a wide pH, temperature, and salinity range. Based on a series of chemical analyses, the biosurfactant was classified as phospholipid. The autochthonous bioaugmentation technique developed by Z11 indicated a significant increase (P < 0.05) in the degradation of n-alkanes of varying chain lengths and polycyclic aromatic hydrocarbons. The analysis of the microbial composition demonstrated that the addition of Z11 caused a rise in bacterial populations capable of hydrocarbon decomposition, such as Pseudomonas sp. and Stenotrophomonas sp. The activities of two enzymes involved in degradation, alkane hydroxylase and alcohol dehydrogenase, increased dramatically and showed a significant (P < 0.05) correlation with Enterobacter sp. Z11. The proposed mechanism could be elucidated that functional genes regulate the secretion of biodegradation enzymes and biosurfactants to promote the deep degradation of petroleum hydrocarbons. This study provides technical support for the reintroduction of autochthonous microorganisms capable of producing biosurfactants in implementing in situ ABA strategies.

Investigation of the pollutant load of artisanal-refined gasoline in the Niger Delta region of Nigeria and its implications on air quality

In order to examine the gaseous pollutants generated by artisanal refined gasoline and the contribution to air pollution associated with such combustion in the Niger-Delta region of Nigeria, this study collected a sample of indigenously refined gasoline product each from thirty (30) different randomly selected artisanal camps in the Niger-Delta region and subjected all the collected samples to combustion. Fifty (50) ml of each gasoline sample was combusted at controlled conditions, and the concentrations of gaseous emissions from the process were measured using a combustion emission analyser. Pollutants characterised by the Department of Petroleum Resources which include sulphur dioxide (SO2), carbon monoxide (CO), oxides of nitrogen (NOx), hydrocarbons (HC) and carbon dioxide (CO2) were characterised. The average concentrations of the emissions were 211.50 mg/m3, 7.18 mg/m3, 17.51 mg/m3, 3011.33 mg/m3, and 500.39 mg/m3 for CO, NOx, SO2, CO2, and HC respectively. The concentrations of SO2 and NOx measured were within the Federal Environmental Protection Agency (FEPA) set limits for combustion emissions from stationary sources but breached World Health Organization (WHO), World Bank and Environmental Guidelines and Standard for Petroleum Industry in Nigeria (EGASPIN) set limits. The concentrations of CO and HC exceeded FEPA, WHO, World Bank and EGASPIN set limits and hazardous on Air Quality Index (AQI) classification. Elevated concentrations of CO and HC in the atmosphere pose a major threat to ambient air quality and human health, especially in locations where artisanal-refined fuel is predominantly utilised. Associated risks include poor visibility, occurrence of acid rain, blood poisoning and cancer-related diseases. In addition to these effects are the worsening global warming crises associated with CO2 emission, a major product of fossil fuel combustion.

Parameterization of H2SO4 and organic contributions to volatile PM in aircraft plumes at ground idle.

Volatile Particulate Matter (vPM) emissions are challenging to measure and quantify, since they are not present in the condensed form at the engine exit plane and they evolve to first form in the aircraft plume and then continue to grow and change as they mix and dilute in the ambient atmosphere. To better understand the issues associated with the initial formation and growth of vPM, a modeling study has been undertaken to examine several key parameters that affect the formation and properties of the vPM that is created in the initial cooling and dilution of the aircraft exhaust. A modeling tool (Aerosol Dynamic Simulation Code, ADSC) that was developed and enhanced over a series of past research projects supported by NASA, DoD's SERDP/ESTCP, and FAA (Wong et al. 2010, 2014, 2015) was used to perform a parametric analysis of vPM. The parameters of fuel sulfur content (FSC), emitted condensable hydrocarbon (HC) concentrations, and the species profile of the HCs were used to construct a computational matrix that framed a wide range of expected parameter values. This computational matrix was executed for two representative commercial aircraft engines at ground idle and results were obtained for distances of 250 m and 1000 m downstream. From prior results, the most significant vPM emissions occur at the lowest power settings, so an engine power condition of 7% rated thrust was used. A primary goal of the parametric study is to develop an updated vPM modeling methodology and also to help interpret data collected in experimental campaigns. The parameterization proposed here allows the vPM emission composition and particle numbers to be estimated in greater detail than current methods. The aim is to provide additional understanding on how the vPM properties vary with fuel and engine parameters to increase the utility of vPM predictions.Implications: Volatile ParticulateMatter (vPM) is an important contribution to the total PM emitted by aviationengines. While vPM is not currently a part of engine emissions certificationregulations, vPM is used in aviation environmental impact assessments and forair quality modeling in and around airports. Current methods in use, such asFOA (Wayson et al. 2009), were developed before many recent advances inexperimental data acquisition and in understanding of vPM processes. Theparameterization proposed here allows the vPM emission composition and particlenumbers to be estimated in greater detail than current methods. These estimatescan be used to develop inventories and provide a better estimate of total PMemission for most aviation engines. Its use in international regulatory toolscan inform possible future regulatory actions regarding vPM.

A quantitative study of microstructure of Indian Gondwana shale: a fractal and algebraic topology approach

This paper covers a novel micro-level application of image processing in understanding the topological and petrophysical properties of Indian Gondwana Shale using an X-ray computed micro tomography images. The complexity and randomness in the pore system are explained through the concept of fractal dimension (FD). In this article, a quantitative analysis of 2D and 3D fractal dimension of pores, grains, and interface has been done for the Indian Gondwana Shale, using the Box counting method. A pore network is formed by the connection of many sub-pore clusters, each with a different volume. Hence, an image segmentation algorithm has been applied to label different sub-clusters, and subsequently, analysis of FD is done on such sub-clusters of pores and grains. We implemented a novel application of Betti numbers (B0, B1 and B2) and Euler characteristics on our sample and calculated the possible flow channels of the sample. The FD of grains was found to be greater than the FD of pore-grains interface, while the FD of pores was found to be the least. Consequently, we also observed how the FD of both pores and grains is majorly controlled by the largest sub-cluster, and during fluid intrusion, we see a significant decrease in FD of pores. Lastly, the pore network, with a larger B0 and larger difference of B1 can be proved best for the storage of hydrocarbon content and its fluid movement understanding due to more flow channels.

The Significance of Processing Techniques on the Quality of Smoked African Cat Fish (Clarias gariepinus) Using Different Energy Sources

There is unavoidable need for fish smoking as a preservative technique to reduce rampant post harvest losses in the tropical Africa. However the imperative of healthier and quality smoked products through improved processing method were however investigated. Organoleptic and chemical assessment of African catfish collected from a reputable fish farm in Ogbomoso, Oyo state Nigeria was carried out. Eviscerated and non-eviserated fish samples were smoked using four different smoke sources: Gmelina (Gmnelina arborea), Parkia (Parkia biglobosa), Neem (Azadirachita indica) and charcoal. Overall acceptability was based on 5-point Hedonic scale (excellent (5) - poor (1). Chemical test was on Polycyclic Aromatic Hydrocarbon contents (benzo(a)pyrene, Fluoranthene, Napthalene, Acenapthalene, Chrysene and Benzo(ghi) perylene). Data were subjected to one way Analysis of Variance (ANOVA) using general linear mode (GLM) of Factorial Experimental Design and means were separated by Duncan’s multiple range tests (P&lt;0.05). Non- eviscerated smoked African catfish samples had lower scores for colour than eviscerated smoked samples for energy sources used. Eviscerated samples had mean scores of 4.64, 3.91, 3.36 and 2.82 for charcoal, Gmelina, Neem and Parkia smoked samples respectively, much better than scores of 4.36, 2.46, 2.36 and 2.27 obtained for non-eviscerated samples. Total concentrations of polycyclic aromatic hydrocarbons (PAH) were highest in samples produced using Gmelina as smoke source and Neem for eviscerated (15.25 µg/kg) and non-eviscerated (29.43 µg/kg) samples respectively. Evisceration of fish prior to smoking enhances its sensory characteristics however; concentrations of PAHs for both eviscerated and non-eviscerated fish samples were within the recommended international standard limit.

Water Quality and the First-Flush Effect in Roof-Based Rainwater Harvesting, Part II: First Flush

Rainwater runoff samples from a range of roofing materials were temporally collected from 19 small-scale roof structures and two commercial buildings through simulated and actual storm events, and the concentrations of polycyclic aromatic hydrocarbons (PAHs), phosphorus flame retardants (PFLs), and pyrethroid insecticides and other water quality parameters were analyzed. In Part I of this research, the concentrations of these contaminants in roof runoff and soils receiving runoff from a range of roofing materials were evaluated. In Part II, recommendations have been developed for a first-flush exclusion to improve the quality of water harvesting for nonpotable uses. Recommendations focus on a first-flush diversion based on mass removals of total suspended solids (TSS) and PAHs linked to conductivity measurements throughout a storm event. Additionally, an upper-confidence limit (UCL) was constructed to determine the minimum diversion required to obtain 50, 75, 90, and 95% mass removal of TSS and PAH contaminants. The majority of TSS were produced during the initial 1.2 mm of runoff. Likewise, the majority of PAHs were removed during the initial 1.2 mm of runoff, except for the asphalt shingle roofs, where high PAHs were observed after 6 mm of runoff. The Texas Water Development Board (TWDB)-recommended first-flush diversion of one gallon for every 100 square feet of rooftop was not always adequate for removing 50% of TSS and PAHs from the roofs. Rainwater runoff conductivity decreased drastically between 1.2 to 2.4 mm of rainwater runoff. Diverting the first flush based on conductivity has the potential to also divert the majority of TSS and PAHs in roof runoff.

Integrated geophysical and geochemical characterization of hydrocarbon contaminated site in Erhoike-Kokori, Southern Nigeria

The effectiveness of geophysical and geochemical methods in delineating hydrocarbon contamination in a spill site is carried out around theErhoike flow station in Kokori, Ethiope East LGA, Delta State. Wenner array was used for the transverse in acquiring the data which spanned a transverse of 200m and 3D model resistivity images were obtained from the inversion and presented in horizontal depth slices. Well water samples were also taken for Total Petroleum Hydrocarbon (TPH) content while soil samples from the location were also taken for Porosity and coefficient of permeability. The result of the 3D horizontal depth slices in the location reveals that Erhoike is impacted with hydrocarbon plume to a depth of 31.7m. The concentration of TPHCs from the water analysis shows that the wells around the suspected zones are affected by hydrocarbon. The laboratory tests for porosity (Փ ) and coefficient of permeability (k) for the soil samples are indicative of sand/silty sand which thus allows the flow of PHCs plume to the soil and groundwater in the study area. The results of the study have shown that the soil is permeable and porous which would allow the passage of the leaked and spilled PHCs through the soil to groundwater where the PHCs could mix, float and sink into groundwater. The 3D analysis revealed the presence of PHCs up to a depth of 33.7m but prominent at a depth of 10m which indicates the presence of PHCs in the wells. The hydrochemical analysis also proved the same results as that of the 3D which authenticated the reliability of the method used in the study.

Sequential oxidation-composting-phytoremediation treatment for the management of an oily sludge from petroleum refinery

Oily sludges are generated in large quantities in petroleum refinery wastewater treatment plants. Given their complex composition, they are classified as hazardous waste. Selecting a single treatment technique for their remediation is challenging.This work aims to assess the extent of composting followed by phytoremediation on an oily sludge from an API separator unit, pre-treated by chemical oxidation with alkaline activated persulfate (PS). 18% of total petroleum hydrocarbons (TPH) were determined by IR spectroscopy. The aliphatic hydrocarbon content was 4714 ± 250 ppm by GC-FID, and aromatics were not detectable, suggesting a high amount of non-chromatographable complex hydrocarbons. The density of generalist and hydrocarbon-degrading populations of the oily sludge estimated by quantitative polymerase chain reaction (qPCR) evidenced an autochthonous microbiota with hydrocarbon-degrading capacity. The oxidative treatment with PS removed 31% of the TPH determined by IR after 20 days. The significant reduction of the native bacterial community was counterbalanced by coupling a composting treatment. Co-composting the sludge with goat manure and oat straw produced, after a year, a 96% reduction in TPH content, regardless of the oxidative pretreatment. Organic matter transformation was evidenced by the decrease of dissolved organic carbon (DOC) and the variation in E4/E6 ratio. The matrices obtained of composting were used as substrates for phytoremediation for 4 months. Ryegrass seeds were planted in both PS-treated and untreated sludge substrates. The presence of the plant grown in the pre-oxidised and composted substrate resulted in a higher aerial biomass of ryegrass (67%), an increase in enzymatic activities, and higher concentration of DOC, although without evidence of additional dissipation of TPH.The dynamics of the bacterial communities of the different substrates generated during the biological treatment were analyzed by Illumina NovaSeq DNA sequencing of 16S rRNA amplicons. The findings mirrored a succession compatible with that described in contaminated matrices, but also in other non-contaminated ones.According to these findings, an organic matter transformation process occurred, which included the complex hydrocarbons of the oily sludge, resulting in an active substrate that promoted the retention of nutrients and water and provided the necessary support for plant development.

Обеспечение канцерогенной безопасности копченой рыбной продукции

The purpose of the study is to develop recommendations for rational smoke generation parameters that ensure the quality and environmental safety of smoked fish products. Objectives: to establish the influence of smoke generation parameters on the assessment of the carcinogenicity of smoked products; to evaluate the quality and safety of smoked products produced under optimal smoke generation parameters; to develop recommendations to ensure the quality and safety of smoked fish products. Research was carried out at the department of Management of Technical Systems at the Federal State Budgetary Educational Institution of Higher Education Dalrybvtuz (Vladivostok, Primorsky Region). The object of the study is the process of smoke generation. Analytical, physical and chemical methods, and mathematical modeling methods were used. To prepare smoke-drying smoke samples, 10 kg of alder sawdust with a moisture content of 30–35 % was prepared. Hot smoked smelt samples were obtained under optimal smoke generation conditions. The overall organoleptic index was 5. The content of individual polyaromatic hydrocarbons was: chrysene – 71 ng/kg; benz(a)anthracene – 70 ng/kg; benz(b)fluoranthene – 602 ng/kg; benz(a)pyrene – 64 ng/kg; benz(e)pyrene – 667 ng/kg; dibenz(a,c)anthracene – 57 ng/kg; dibenz(a,h)anthracene – 69 ng/kg, which corresponds to a generalized quality index of 0.99 (very good). During the study, the influence of smoke generation parameters on the assessment of the carcinogenicity of smoked fish products was established, and the dependence of the content of individual polyaromatic hydrocarbons on the excess air coefficient in the smoke generation zone was confirmed. Optimal smoke generation modes: smoke generation temperature 475 °C, excess air coefficient – 0.4. Rational smoke generation parameters: smoke generation temperature 450–500 °C, excess air coefficient – 0.3–0.6.

Volatile Profiles and DNA Barcodes of Myrtaceae species with Occurrence in the Brazilian Amazon.

Myrtaceae family includes many species with taxonomic challenges, making it one of the most complex families to identify. This study used DNA barcoding to find molecular markers for species authentication based on the Myrtaceae family's chemical composition and genetic diversity. Essential oils and genetic material were extracted from the leaves of six different species:Eugenia uniflora,E. patrisii,Myrcia splendens,Psidium guajava,P. guineense, andPsidiumsp. The samples were analyzed based on compound classes and grouped into two categories. Group I included samples with high amounts of oxygenated sesquiterpenes (3.69-76.05%) and fatty acid derivatives (0.04-43.59%), such asE. uniflora,Myrcia splendens, andE. patrisii. Group II included samplesP. guajava,P. guineense, andPsidiumsp., which had a significant content of monoterpene hydrocarbons (0.69-72.35%), oxygenated sesquiterpenes (8.06-68.1%), phenylpropanoids (0.45-22.59%), and sesquiterpene hydrocarbons (0.27-21.84%). ThePsbA-trnHgene sequences had a high genetic variability, allowing the species to be distinguished. A phylogenetic analysis showed two main clusters with high Bootstrap values corresponding to the subtribes Eugeniineae, Myrciinae, and Pimentinae. The results suggest a weak correlation between genetic and chemical data in these Myrtaceae species.

Modeling polycyclic aromatic hydrocarbons (PAHs) concentrations from wildfires in California

In recent years, wildfires in California have increased in frequency and intensity due to climate change and prolonged drought. The air pollutants released by wildfires cause significant health consequences, among which polycyclic aromatic hydrocarbons (PAHs) are particularly toxic. Estimating PAH emissions from wildfires is challenging due to variability in vegetation types. In this study, we estimate PAH emission rates across California at a high resolution, based on laboratory-measured PAH emission rates from 22 different vegetation types and detailed vegetation mapping. By combining these estimates with biomass burning data from the NCAR Fire Inventory, the Community Multiscale Air Quality Modeling System simulates PAH concentrations for the 2017 fire season. The modeling results compare favorably to measurements from three PAH monitoring sites in California. The peak PAH emissions from wildfire events are up to be 80 times higher in the gas phase and 32 times higher in the particle phase compared to a case without fire emissions. The population-weighted PAH concentrations from the fire case (0.053 µg/m3) are 47 % higher compared to a non-fire case (0.036 µg/m3) in the particle phase and 11 % higher in the gas phase (9.82 ppt compared to 8.83 ppt) during the study period. While highly depended on the meteorological condition, the simulated spatial distribution indicates that gas-phase PAHs are less likely to travel long distances from the fire source and are prone to aging into the particle phase during transport. Consequently, populations are more likely to be exposed to particle-phase PAHs during wildfire events. This finding has important implications for understanding the health impacts of wildfire-induced PAH concentrations, as particle-phase PAHs may have different toxicological effects compared to gas-phase PAHs.

Degradation of petroleum hydrocarbon contaminants by Rhodococcus erythropolis KB1 synergistic with alfalfa (Medicago sativa L.).

Petroleum hydrocarbons are a stubborn pollutant that is difficult to degrade globally, and plant-microbial degradation is the main way to solve this type of pollutant. In this study, the physiological and ecological responses of alfalfa to petroleum hydrocarbons in different concentrations of petroleum hydrocarbon-contaminated soil with KB1 (Rhodococcus erythropolis) were analyzed and determined by laboratory potting techniques. The growth of alfalfa (CK) and alfalfa with KB1 (JZ) in different concentrations of petroleum hydrocarbons contaminated soil was compared and analyzed. The results of the CK group showed that petroleum hydrocarbons could significantly affect the activity of alfalfa antioxidant enzyme system, inhibit the development of alfalfa roots and the normal growth of plants, especially in the high-concentration group. KB1 strain had the ability to produce IAA, form biofilm, fix nitrogen, produce betaine and ACC deaminase, and the addition of KB1 could improve the growth traits of alfalfa in the soil contaminated with different concentrations of petroleum hydrocarbons, the content of soluble sugars in roots, and the stress resistance and antioxidant enzyme activities of alfalfa. In addition, the degradation kinetics of the strain showed that the degradation rate of petroleum could reach 75.2% after soaking with KB1. Furthermore, KB1 can efficiently degrade petroleum hydrocarbons in advance and significantly alleviate the damage of high concentration of petroleum hydrocarbons to plant roots. The results showed that KB1 strains and alfalfa plants could effectively enhance the degradation of petroleum hydrocarbons, which provided new ideas for improving bioremediation strategies.

A bioprocess engineering approach for the production of hydrocarbons and fatty acids from green microalga under high cobalt concentration as the feedstock of high-grade biofuels

Botryococcus braunii, a colonial green microalga which is well-known for its capacity to synthesize hydrocarbons, has significant promise as a long-term source of feedstock for the generation of biofuels. However, cultivating and scaling up B. braunii using conventional aqua-suspended cultivation systems remains a challenge. In this study, we optimized medium components and light intensity to enhance lipid and hydrocarbon production in a multi-cultivator airlift photobioreactor. BBM 3N medium with 200 μmol/m2/s light intensity and a 16 h light–8 h dark regimen yielded the highest biomass productivity (110.00 ± 2.88 mg/L/day), as well as the highest lipid and hydrocarbon content. Cultivation in a flat-panel bioreactor resulted in significantly higher biomass productivity (129.11 ± 2.74 mg/L/day), lipid productivity (32.21 ± 1.31 mg/L/day), and hydrocarbon productivity (28.98 ± 2.08 mg/L/day) compared to cultivation in Erlenmeyer flasks and open 20-L raceway pond. It also exhibited 20.15 ± 1.03% of protein content including elevated levels of chlorophyll a, chlorophyll b, and carotenoids. This work is noteworthy since it is the first to describe fatty acid and hydrocarbon profiles of B. braunii during cobalt treatment. The study demonstrated that high cobalt concentrations (up to 5 mg/L of cobalt nitrate) during Botryococcus culture affected hydrocarbon synthesis, resulting in high amounts of n-alkadienes and trienes as well as lipids with elevated monounsaturated fatty acids concentration. Furthermore, pyrolysis experiments on microalgal green biomass and de-oiled biomass revealed the lipid and hydrocarbon compounds generated by the thermal degradation of B. braunii that facilitate extra economical value to this system.

Microbial community response to hydrocarbon exposure in iron oxide mats: an environmental study.

Hydrocarbon pollution is a widespread issue in both groundwater and surface-water systems; however, research on remediation at the interface of these two systems is limited. This interface is the oxic-anoxic boundary, where hydrocarbon pollutant from contaminated groundwaters flows into surface waters and iron mats are formed by microaerophilic iron-oxidizing bacteria. Iron mats are highly chemically adsorptive and host a diverse community of microbes. To elucidate the effect of hydrocarbon exposure on iron mat geochemistry and microbial community structure and function, we sampled iron mats both upstream and downstream from a leaking underground storage tank. Hydrocarbon-exposed iron mats had significantly higher concentrations of oxidized iron and significantly lower dissolved organic carbon and total dissolved phosphate than unexposed iron mats. A strong negative correlation between dissolved phosphate and benzene was observed in the hydrocarbon-exposed iron mats and water samples. There were positive correlations between iron and other hydrocarbons with benzene in the hydrocarbon-exposed iron mats, which was unique from water samples. The hydrocarbon-exposed iron mats represented two types, flocculent and seep, which had significantly different concentrations of iron, hydrocarbons, and phosphate, indicating that iron mat is also an important context in studies of freshwater mats. Using constrained ordination, we found the best predictors for community structure to be dissolved oxygen, pH, and benzene. Alpha diversity and evenness were significantly lower in hydrocarbon-exposed iron mats than unexposed mats. Using 16S rDNA amplicon sequences, we found evidence of three putative nitrate-reducing iron-oxidizing taxa in microaerophile-dominated iron mats (Azospira, Paracoccus, and Thermomonas). 16S rDNA amplicons also indicated the presence of taxa that are associated with hydrocarbon degradation. Benzene remediation-associated genes were found using metagenomic analysis both in exposed and unexposed iron mats. Furthermore, the results indicated that season (summer vs. spring) exacerbates the negative effect of hydrocarbon exposure on community diversity and evenness and led to the increased abundance of numerous OTUs. This study represents the first of its kind to attempt to understand how contaminant exposure, specifically hydrocarbons, influences the geochemistry and microbial community of freshwater iron mats and further develops our understanding of hydrocarbon remediation at the land-water interface.

Seasonal Variation of Groundwater Quality in Bonny Island, Rivers State Nigeria

This study investigated the seasonal variations in physicochemical parameters, heavy metals, and petroleum hydrocarbons in groundwater samples collected in nine locations in Bonny Island, Rivers State Nigeria. The water samples for the dry season were collected in December and January while for the wet season, water samples were collected in July and October. A quantitative approach was employed, involving the collection of quantitative data through field sampling and laboratory analysis. Physicochemical parameters, including pH, electrical conductivity, dissolved oxygen, and nutrient levels, were measured using standard analytical techniques. Heavy metal concentrations (Fe, Cd, etc.) were determined using atomic absorption spectrophotometry, while petroleum hydrocarbons (total hydrocarbons and polycyclic aromatic hydrocarbons) were analyzed through solvent extraction and gas chromatography techniques. The study revealed significant seasonal variations in several parameters, with notable significant decreases in phosphate during the wet season and significant increases in chromium and cadmium levels during the dry season (p-value &lt; 0.05). Petroleum hydrocarbon concentrations also exhibited seasonal fluctuations, potentially influenced by precipitation patterns, oil and gas activities, and accidental spills or leaks which were observed during the dry season.

Enhanced catalytic activity of Sm/CeO2 to produce gasoline-range hydrocarbons from pyrolysis of spent coffee grounds

This study investigated the application of Sm/CeO2 catalyst for hydrocarbon production in catalytic pyrolysis (CP) of spent coffee grounds (SCGs). A temperature range of 450–750 °C and catalyst/biomass (C/B) ratios of 0.5–4 were employed in the CP. The results showed that an increase in pyrolysis temperature consistently increased the quantity of hydrocarbons and considerably decreased the oxygenated compounds like acids and phenols. At temperatures of 450 and 550 °C, C/B ratios of 2 or 1 generated the maximum amount of hydrocarbons. At 650 and 750 °C temperatures, C/B ratios of 0.5 and 1 were capable to achieve a higher content of hydrocarbons in bio-oils, suggesting the synergistic effect of temperature and catalyst activity. The hydrocarbons in bio-oils were found in the gasoline range, mainly containing benzene, toluene, ethylbenzene, xylene (BTEX), olefins, and cycloalkenes. Primary reactions involved to convert oxygenated compounds into hydrocarbons were dehydration, decarboxylation, decarbonylation, dehydrogenation, isomerization, and aromatization reactions.

Insights into bacterial diversity in industrial post-processing water from underground coal gasification (UCG) process

This study represents the first culture-independent profiling of microbial diversity in post-processing wastewater from underground coal gasification (UCG) processes. Three types of post-processing wastewater, named W1, W2 and W3, were obtained from three UCG processes involving two types of coal and two gasification agents, namely oxygen-enriched air and oxygen. Very high concentrations of BTEX (benzene, toluene, ethylbenzene, xylene), polyaromatic hydrocarbons (PAHs), and phenol were detected in the wastewater, classifying it into the fifth toxicity class, indicating very high acute toxicity. The values for the Shannon (H), Ace and Chao1 indices in W2 were the lowest compared to their values in W1 and W3. The dominate phyla were Proteobacteria, contributing 84.64% and 77.92% in W1 and W3, respectively, while Firmicutes dominated in W2 with a contribution of 66.85%. At the class level, Gammaproteobacteria and Alphaproteobacteria were predominant in W1 and W3, while Bacilli and Actinobacteria were predominant in W2. Among Bacilli, the Paenibacillus and Bacillus genera were the most numerous. Our results suggest that the main differentiating factor of the bacterial structure and diversity in the wastewater could be the gasification agent. These findings provide new insights into the shifting patterns of dominant bacteria in post-processing wastewater and illustrate the spread of bacteria in industrial contaminated wastewater.

Assessment of water quality and associated human health risk of a tropical freshwater body in Edo State, Nigeria

The quality of freshwater sources is a key factor in sustainable development. This study investigated the water quality suitability of Ossiomo River for human consumption and the implications for public health. Water samples were collected and analysed from October 2021 to March 2022. Results indicated that the water physico-chemical parameters from sampled locations were within their respective National Environmental Standards and Regulation Enforcement Agency (NESRA) permissible limits except for pH (< 6.5), dissolved oxygen (< 6.0mg L−1), cadmium (> 0.005m /L−1), manganese (> 0.05mg L−1) and total hydrocarbon content (>10mg L−1). Comprehensive pollution index (0.4–1.0) and water quality index (251.57–765.37) values indicate that the water body was slightly polluted and unsuitable for human consumption (WQI > 50). Health risk assessment showed that children and adults were predisposed to non-carcinogenic risk (HIoral > 1) and carcinogenic risk (ICR: 1.21E-02 and 2.84E-03) from heavy metals through oral exposure. Natural run-off and anthropogenic activities were identified sources of heavy metals and hydrocarbons within the catchment. The study has provided data for water resource quality monitoring and raised concerns as to the need for immediate action to safeguard the public health of communities surrounding the Ossiomo River, through the provision of alternative sources of potable water.

STUDY OF THE DYNAMICS OF THE PROCESS OF ADSORPTION OF AROMATIC HYDROCARBONS FROM ALKANE

In petrochemistry, normal paraffins are used mainly as raw materials for the production of alkylbenzenes, alkanesulfonates, synthetic fatty acids, secondary alcohols, a-olefins (thermocracking), internal olefins (dehydrogenation). Currently, the market for synthetic detergents (SMC) is one of the most dynamically developing in the world. According to the forecasts of the leading companies producing alkyl benzenes, in the next 10 years, the demand for intermediates for the production of synthetic detergents is expected to grow both in domestic markets and in the global market as a whole. At hydrotreatment units, a wide fraction of n-paraffins (C9–C20) is released from hydrotreated diesel fuel. After that, the C9–C20 fraction is sent to the pre-fractionation unit of the olefin production unit, where the C14–C17 fraction is separated from the wide fraction. This fraction is marketable and requires preliminary purification from aromatic hydrocarbons. Typically, the content of aromatic hydrocarbons in the crude fraction С14+ is from 0.5 to 2.0 wt%. The residual content of aromatic hydrocarbons in the purified fraction should not exceed 0.01% wt. To remove aromatic hydrocarbons, the С14+ fraction is fed to the oleum treatment unit. At the oleum purification unit, post-treatment is carried out using oleum with a concentration of 20–24% wt. After sulfonation, it is necessary to neutralize with caustic soda. Obtaining dearomatized liquid paraffins from diesel fuel using oleum purification has many disadvantages, since working with fuming sulfuric acid requires a high degree of protection of the human body and the strictest observance of safety regulations. Due to the difficulties in disposing of spent sulfuric acid, plant shutdowns and downtime are not uncommon. This article presents the results of a comprehensive study of the adsorption of aromatic hydrocarbons from higher alkanes on zeolite CaX. The main parameters of statics, dynamics and kinetics of adsorption are determined

The Effect of Burning on the Polycyclic Aromatic Hydrocarbons (PAH) Content in Goat Satay in the East Java Region

The Effect of Burning on the Polycyclic Aromatic Hydrocarbons (PAH) Content in Goat Satay in the East Java Region