Abstract

In petrochemistry, normal paraffins are used mainly as raw materials for the production of alkylbenzenes, alkanesulfonates, synthetic fatty acids, secondary alcohols, a-olefins (thermocracking), internal olefins (dehydrogenation). Currently, the market for synthetic detergents (SMC) is one of the most dynamically developing in the world. According to the forecasts of the leading companies producing alkyl benzenes, in the next 10 years, the demand for intermediates for the production of synthetic detergents is expected to grow both in domestic markets and in the global market as a whole. At hydrotreatment units, a wide fraction of n-paraffins (C9–C20) is released from hydrotreated diesel fuel. After that, the C9–C20 fraction is sent to the pre-fractionation unit of the olefin production unit, where the C14–C17 fraction is separated from the wide fraction. This fraction is marketable and requires preliminary purification from aromatic hydrocarbons. Typically, the content of aromatic hydrocarbons in the crude fraction С14+ is from 0.5 to 2.0 wt%. The residual content of aromatic hydrocarbons in the purified fraction should not exceed 0.01% wt. To remove aromatic hydrocarbons, the С14+ fraction is fed to the oleum treatment unit. At the oleum purification unit, post-treatment is carried out using oleum with a concentration of 20–24% wt. After sulfonation, it is necessary to neutralize with caustic soda. Obtaining dearomatized liquid paraffins from diesel fuel using oleum purification has many disadvantages, since working with fuming sulfuric acid requires a high degree of protection of the human body and the strictest observance of safety regulations. Due to the difficulties in disposing of spent sulfuric acid, plant shutdowns and downtime are not uncommon. This article presents the results of a comprehensive study of the adsorption of aromatic hydrocarbons from higher alkanes on zeolite CaX. The main parameters of statics, dynamics and kinetics of adsorption are determined

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call