Cell Components Research Articles

Towards High-Performance AEM Water Electrolyzers: Transitioning from PGM to Low-PGM and PGM-Free Electrocatalysts

Hydrogen, known for its high gravimetric energy density and low environmental impact, is widely regarded as a promising low-carbon energy carrier. The production of hydrogen via water electrolysis offers a valuable opportunity to efficiently utilize renewable energy resources – both as a storage and transport medium and to produce hydrogen that is a crucial feedstock for multiple industrial and manufacturing applications. Among various water electrolysis technologies, anion exchange membrane water electrolyzers (AEMWEs) are notable for their distinct and advantageous features. Their alkaline operational environment significantly reduces corrosion, allow for the possibility to use catalysts and cell component materials that are earth abundant and cost effective. Moreover, the use of anion exchange membranes (AEMs) as the electrolyte and zero-gap design enhance operational efficiency and hydrogen production rates compared to traditional alkaline electrolyzers. These benefits position AEMWEs as a compelling solution for efficient, cost-effective large-scale hydrogen production.To date, the development of lower-cost AEMWEs has been hindered by several challenges. A critical issue is the activity and durability of catalysts, particularly those that are platinum group metal (PGM)-free. This leads many researchers and electrolyzer manufacturers to lean on PGM catalysts at both the anode and cathode. These catalysts, while effective, significantly increase the cost and complexity of the system, posing a barrier to widespread adoption and commercialization of AEMEL technology in the burgeoning hydrogen economy. PGM-free anodes have been demonstrated for the AEMWE, but there have been fewer PGM-free options for the cathode.This study assessed the performance and durability of various low-PGM and PGM-free electrocatalysts for the oxygen evolution (OER) and hydrogen evolution (HER) reactions. We focused on Lanthanum Strontium Cobalt (LSC), Nickel Ferrite (NiFeOx), and Lead Ruthenate (PbRuOx) for the OER at the anode, and Nickel Molybdenum (NiMo), Nickel Rhenium (NiRe), and a low-PGM PtNi for the HER at the cathode. Furthermore, the performance of the NiMo HER catalyst was enhanced by optimizing the physical properties of both the catalyst powder and the electrodes. These experimental results offer crucial insights into developing PGM-free AEM water electrolyzer systems, marking a progressive step towards their commercial feasibility.

Development of an Onboard Urea Electrolyser to Reduce NOx Emissions in Vehicles By Enhancing the Selective Catalytic Reduction with the Produced H2 and NH3

In the persistent pursuit of reducing nitrogen oxide emissions from diesel exhaust, challenges arise in achieving optimal performance at lower temperatures, especially in urban driving conditions. This research focuses on a pragmatic approach – development of an onboard urea electrolyser using diesel exhaust fluid (DEF) as the hydrogen-rich carrier. The primary goal is to enhance the NOx reduction efficiency at temperatures below 200oC by providing the electrolyser products – hydrogen and ammonia [1]. The reason behind this innovation lies in recognising DEF as a viable electrolyte, offering both safety and a promise of performance increase due to splitting of urea instead of water. Beyond the contribution to NOx reduction, this approach aligns with the broader societal and political imperatives of integrating cleaner energy solutions within the automotive sector. However, the development of a functional urea electrolyser involves certain complexities. The key considerations are the material stability under operating conditions, anode catalyst dissolution in DEF, mass transport limitations, and the reduction of relatively high cathode overpotentials. A notable aspect of our research involves addressing these challenges in scenarios both with and without potassium hydroxide alongside DEF, requiring a nuanced understanding of the electrochemical processes involved. Additionally, weight, packaging, and system integration play an important role in the development of an onboard urea electrolyser.This study systematically explores these challenges to devise a comprehensive understanding of the underlying electrochemical processes involved as well as the integration and operation strategy. The research methodology adopts single cell tests for which activation and measurement protocols have been established to achieve representative and comparable performance curve recordings and electrochemical impedance spectroscopy (EIS) data. Additionally, to various operating conditions of the electrolyte, the cell components screening adds to a considerable effort of this study. We explore the influence on the materials and design of the bipolar plates (BP) and porous transport layers (PTL); electrode performance and durability as well as the membrane selection. Within this study we consider anion exchange membranes (AEM) and bipolar membranes (BPM) for the performance comparison. Adopting both catalyst-coated membrane (CCM) and catalyst-coated substrate (CCS) approaches enables for examination of electrode preparation techniques and their influence on performance of the electrolysis cell. The initial results are promising, especially when employing 1 M KOH in the DEF electrolyte at 70oC, reaching 0.85 A cm-1 at 2 V. The respective performance curve is presented in Figure 1., together with a diagram of the electrolyser system integration into an existing Diesel exhaust line.This research represents a practical stride towards realising the denitrification of transportation sector especially in city cycle driving when the exhaust gases temperature is too low for the state-of-the-art SCR systems. By addressing identified challenges and optimising key parameters, our study lays a robust foundation for the scalable implementation of a functional urea electrolyser for transport applications and a basic understanding of the electrochemical processes behind the performance and stability of such a system.Figure 1.Depicts a recorded polarisation curve of a single cell using an anion exchange membrane (AEM) and nickel catalyst anode fed DEF and 1 M KOH as an electrolyte at 70oC. Below, the suggested integration of the electrolyser into latest generation Diesel exhaust aftertreatment system. It includes diesel oxidation catalyst (DOC), selective Diesel particulate filter (sDPF), hydrogen supported denitrification catalyst ‘H2-deNOx’ and finally a selective catalytic reduction (SCR) step.Reference: Esser, E., Kureti, S., Heckemüller, L., Todt, A. et al., "Low-Temperature NOx Reduction by H2 in Diesel Engine Exhaust," SAE Int. J. Adv. & Curr. Prac. in Mobility 4(5):1828-1845, 2022, https://doi.org/10.4271/2022-01-0538. Figure 1

Understanding Performance Limitation of Liquid Alkaline Water Electrolyzers

Green hydrogen production via water electrolysis powered by renewable energy is a critical technology in the pursuit of a net-zero emission economy1. Liquid alkaline water electrolyzers (LAWEs), being the most commercially mature electrolyzer technology, play a pivotal role in large-scale green hydrogen production2. The utilization of earth-abundant and cost-effective nickel and iron-based materials as cell components of LAWEs reduces capital cost of large-scale electrolyzer cells3. However, LAWEs suffer from low operational efficiency, primarily due to low intrinsic activity of unoptimized electrode materials, as well as high ohmic resistance introduced by separators and gas bubbles within thick electrodes. Herein, we used a lab-scale LAWE cell in combination with various electrode configurations to gain a deeper understanding of the limiting factors affecting conventional LAWE performance. Our results show that the electrochemical active surface area (ECSA), chemical compositions, and pore structure of the electrodes are key design parameters to achieve high efficiencies for advanced LAWEs. Besides, particular attention should be paid to the micro-gaps in between electrode and separator, which can be minimized through using electrodes with lower surface porosity and smaller pore size. Consequently, these enabled us to build LAWEs that are capable of sustaining 2 A cm-2 at 2.2 V and operating steadily at 1 A cm-2 for nearly 600 h with negligible performance decay. These findings establish essential criteria for selecting electrodes to achieve high-performance in LAWE and, in turn, expedite the adoption of LAWE technology in green hydrogen production and the transition towards a low-carbon economy. Acknowledgement The authors acknowledge the Department of Energy-Office of Energy Efficiency and Renewable Energy-Hydrogen and Fuel Cell Technologies Office (DOE-EERE-HFTO) and the H2 from Next-generation Electrolyzers of Water (H2NEW) consortium for funding under Contact Number DE-AC02-05CH11231.

(Invited) Department of Energy, Energy Efficiency and Renewable Energy - Activity Updates in Reversible Fuel Cells and High Temperature Electrolysis

The Hydrogen and Fuel Cell Technologies Office (HFTO) within the U.S. Department of Energy’s (DOE) Office of Energy Efficiency and Renewable Energy (EERE) supports a range of analysis, research, development, and demonstration efforts that fall under the areas of high temperature electrolysis (HTE) and reversible fuel cells (RFCs). These efforts range from earlier stage R&D on cell components to demonstrating early system technology. Particularly when used in conjunction with high temperature process heat, HTE technology shows promise for highly efficient, cost effective, sustainable hydrogen production at high volumes. This potential has led to its inclusion in multiple HFTO initiatives, including two national lab-led consortia separately focused on next generation materials and overcoming technical barriers to manufacturing durable, affordable, and efficient HTE systems. These consortia objectives, efforts, scopes, and developments are discussed in the context of HTE and recent DOE initiatives and announcements, including the Hydrogen Energy Earthshot, Long Duration Energy Storage Earthshot, and Clean Fuels and Products Earthshot.

(Invited) Looking Beyond the Stack: A Systems Engineering Approach to Optimize Stack and System Design of Electrolysers

In the coming decade green hydrogen production is expected to grow at an unparalleled rate. Much of the international focus is currently on the Gigawatt scale plants, with regular announcement of new projects. From a European perspective, the rapid scale-up is necessary to reduce the reliance on fossil fuels and achieve CO₂ reduction targets. Importing green hydrogen or derivatives such as ammonia from regions where renewable electricity cost are low, is key driver for investments for the energy intensive industry, especially in the North Western part of Europe. This will require hydrogen production on a very large-scale. In contrast to the differentiation on application level, a one-size fits all approach for stack manufacturing appears to be attractive, with a high degree of standardisation and volume of production.However, as the case for the Netherlands illustrates, there are more drivers for green hydrogen production, such as addressing (regional) grid congestion, improving the business case for offshore wind farm developments, and providing green energy to small and medium enterprises. For all these use cases the requirements for the electrolyser system differ. Aspects such as the variability of the energy supply, capacity factors, logistics for operation and maintenance, available footprint, are application specific. Therefore, electrolyser system designs may need to be optimized for different markets and applications.At TNO we focus on the development, integration and validation of novel materials and innovative cell components for the different generations of electrolyser technology, both for low temperature (liquid alkaline, PEM, AEM) and high temperature electrolysers. To understand and assess the requirements for future generations of electrolyser technology, a systems engineering approach is developed together with the industrial partners. This allows to translate the requirements from the application, to the system and stack design, down to the requirements on a cell and component level.Results will be presented from several studies carried out by TNO and industrial partners in the field of low temperature electrolyser systems to understand: How to optimize a stack design for a specific application. Should an electrolyser be designed to maximize flexible operation and achieve a broad operating range? Or will a high efficiency be the most important target? And how application specific is such an optimisation.How to bring down the cost of the total system. What impact do the design choices for the electrolyser stack have on the complexity of the system around the electrolyser, the balance-of-plant? What can we learn from this for the future stack requirements?How different operating strategies impact a certain design. Which stack requirements change in large multi-stack systems powered by renewable electricity supply? Can different strategies improve overall system performance and bring down the overall cost of hydrogen production?How can the desired safety level be achieved against the lowest cost by optimizing component and stack design? As both the electrolyser technology and the value chains become more mature, a systems engineering approach will be indispensable, bringing together the requirements of the different levels: from application, electrolyser system and stack design, down to the performance of individual components.

Quantifying Electrolyte Variation through Coupled Molecular Dynamics and Porous Electrode Modeling of Lithium-Ion Battery Cells

Lithium-ion battery cell modeling using physics-based approaches such as porous electrode theory is a powerful tool for battery design and performance analysis both at the beginning and end of life[1]. Cell metrics such as resistance and thermal performance[2-6] can be quickly calculated in a pseudo-two-dimensional (P2D) framework. For engineering of electric vehicle batteries, speed and fidelity of electrochemical models is paramount in a competitive landscape. Physics-based models[7, 8] allow for high fidelity but require detailed knowledge of the cell component material properties. Acquiring these material characteristics typically requires time-consuming and expensive experiments limiting the ability to quickly screen through cell designs. One approach to circumvent costly experiments is to use molecular dynamics[9, 10] to calculate electrolyte transport properties. We demonstrate how cell modeling using simulated transport properties enables predictions of cell level metrics, allowing for experiment-free component screening. We also show how the variation in transport property predictions from molecular dynamics affects the final cell level performance predictions.

(Invited) Lyten’s High Energy Li-S Batteries for a Sustainable and Circular EV Economy

Li-ion batteries (LIB), though widely used in EV batteries will be unable to meet the demands of the rapidly expanding vehicular market, mainly due to the challenges of cost and availability of key materials globally with limited resources, complicated by geopolitical factors. Li-S batteries promise significant advantages over Li-ion batteries with potentially higher specific energy, lower cost, and enhanced safety. However, their implementation has been hampered by poor cycle life due mainly to polysulfide shuttle caused by the soluble polysulfide intermediates. Lyten, an advanced materials company, has developed a family of new 3D Graphene™ materials for various applications including lithium-sulfur batteries. The mechanically flexible and electrically conductive framework of 3D graphene and its hierarchical porous structure make it an ideal host for potentially confining sulfur intermediates and mitigate the polysulfide shuttle. Lyten 3D Graphene™ materials have already shown enhanced sulfur utilization in Li-S cells far superior to the commercial nanocarbons (Fig. 1), even while their further fine-tuning is on-going. Lyten has established environmentally friendly 3D graphene-sulfur cathode fabrication methodology with high sulfur loadings using an aqueous binder.In parallel, Lyten has been developing new protected Li anodes, advanced stable electrolytes that can function at low quantities (electrolyte/sulfur ratio), and multi-functional separators with an ability to block polysulfide crossover. Integration of these cell components resulted in Li-S cells with specific energy comparable to current Li-ion cells (250-275 Wh/kg). The cycle life is, however, relatively modest with 300 cycles @ 100% DOD, C/3 in coin cells, and ~150 cycles@100% DOD and over one thousand cycles @ 50% DOD in multi-layer pouch cells and 18650 cylindrical cells. There is a steady growth in both these categories enabled by further tuning of 3D graphene and advances in other materials.Recently, Lyten has set up semi-automatic assembly lines for both multi-layer pouch and 18650 cylindrical cells, targeting an annual capacity of 2.4 MWh. These cells have started showing excellent consistency in specific energy in both cell formats. Fig.2 shows the narrow variability in the performance of 35 pouch and 18650 cells made recently for a customer.Finally, preliminary safety tests performed on the recent prototype cells have yielded surprisingly good results for the Li-S cells containing Li metal anode. Tolerance to usual abuse conditions, e.g., internal and external shorts, overcharge and overdischarge, as demonstrated in our ARC tests will be an additive advantage of Lyten Li-S cells. Figure 1

Chondrosarcoma Co-Culture 3D Model─An Insight to Evaluate Drugs Acting on TAMs.

Chondrosarcoma (CHS), also known as malignant cartilage tumors, is the second most common bone cancer after osteosarcoma. This tumor is particularly chemo- and radioresistant, and the only therapeutic alternative is surgery with wide margins. The tumor immune microenvironment reveals an infiltration of tumor-associated macrophages (TAMs) sometimes approaching 50% of the tumor mass, mainly differentiated into M2-like phenotype and correlated with poor prognosis and metastasis. Thus, macrophage-targeting therapies could have an interest in the management of CHS. To evaluate these strategies, we propose here the development of a three-dimensional (3D) tumoroid co-culture model between two human CHS cell lines (JJ012 and CH2879) and a human leukemia monocytic cell line (THP-1) in a methylcellulose matrix. These two models were compared to the in vivo xenograft models in terms of macrophage phenotypes, proteoglycans, MMP-9, and COX-2 expression. Finally, mifamurtide, an immunomodulator acting on TAMs, was evaluated on the most in vitro relevant model: 3D co-culture CH2879 model. Our results showed that it is now possible to develop 3D models that very accurately mimic what is found in vivo with the possibility of evaluating treatments specific to a tumor cell component.

A Rechargeable Solid-State Sodium-Oxygen Battery with Enhanced Energy Efficiency and Cycle Life

Sodium-oxygen (Na-O2) batteries offer a promising path for the advancement of high-energy-density inexpensive storage systems to replace current state of the art Li-based batteries owing to the natural abundance and low-cost Na metal. Despite numerous studies to improve the performance of liquid-based electrolyte Na-O2 batteries, this technology suffers from poor cycle life, electrolyte stability issues, and limited choice of cell design as well as growing safety concerns associated with liquid electrolytes. Recently, solid electrolytes received a great attention to substitute traditional liquid electrolytes used in Na-O2 batteries, due to their ability of improving safety and energy density. However, low ionic conductivity and high impedance in contact with the anode and cathode remain as major challenges for the development suitable solid-state electrolyte for Na-O2 batteries.In addressing these challenges, we recently have established a solid-state Na-O2 battery cell that comprises a highly conductive composite polymer-ceramic solid electrolyte with a conductivity of 0.7 mS/cm. This solid electrolyte works in synergy with vanadium phosphide (VP) nanoparticles, serving as oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) catalysts at the cathode and Na metal anode for more than 500 reversible charge-discharge cycles at a capacity of 1000 mAh/g, achieving a low polarization gap of approximately 20 mV in the first cycle. Various electrochemical and physicochemical characterization techniques, such as Raman spectroscopy, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), differential electrochemical mass spectrometry (DEMS), scanning electron microscopy (SEM), and transmission electron microscopy (TEM), were employed to gain insight into the cell chemistry and solid-state electrolyte role in the formation and decomposition of sodium oxides components such as superoxide (NaO2), peroxide (Na2O2). The findings of this study underscore the significance of proper cell component design and possible mechanisms in solid-state Na-O2 battery technologies. This research represents a promising avenue in advancing energy conversion and storage systems, showcasing the potential of solid-state batteries with enhanced safety and performance characteristics.

Zero-Gap Liquid Alkaline Water Electrolyzers: Challenges in Benchmarking and Directions for Development

Green hydrogen is expected to play a central role in the replacement of fossil energy sources, especially in difficult to decarbonize sectors of the economy. Currently, low temperature methods of electrolysis are the only commercially realized sources of green hydrogen. Liquid alkaline water electrolysis (LAWE) is the most widely utilized method of electrolysis, with a 100-year history of use. Given this lengthy history one could be forgiven for assuming that there is little development left. However, standard LAWE materials and cell designs do not achieve the production, efficiencies, and durability necessary to meet the anticipated demand for green hydrogen.To spur development in this neglected area of hydrogen production, the US Department of Energy, Hydrogen and Fuel Cell Technology Office (DOE-HFTO) added LAWE to its Hydrogen from Next-generation Electrolyzers of Water (H2NEW) Consortium. One of the main tasks for this part of the consortium is to benchmark and validate materials and cell components for LAWE. This includes the development of lab-scale cell hardware and test protocols that can be widely disseminated in the research community. The result of this work will be the development of the methods and materials necessary to achieve robust and reproducible datasets for the improvement of catalysts, separators, cell architecture and operation.We will present the status of the benchmarking effort. This will include a description and explanation of a lab-scale LAWE test station, electrolyte handling, and hydrogen safety. The requirements for the safe operation of an electolyzer using high concentration alkaline electrolytes differs significantly from more typical proton exchange, or anion exchange membrane systems. We will also discuss common sources of error that can significantly influence cell performance and result in poor reproducibility. Acknowledgement:This research is supported by the U.S. Department of Energy (DOE) Hydrogen and Fuel Cell Technologies Office through the Hydrogen from Next-generation Electrolyzers of Water (H2NEW) consortium.

The effects of drone transportation on blood component quality: A prospective randomised controlled laboratory study.

The use of uncrewed aerial vehicles (drones) has increased over the last decade. However, their application in healthcare has not been fully examined, in part, due to regulations preventing flight beyond the visual line of sight. This prospective randomised controlled laboratory study aimed to determine whether the invitro quality of packed red blood cell components is maintained when transported by drone, beyond visual line of sight. Ten identical pairs of packed red blood cell units were randomly allocated to transport by drone or by ground vehicle (1:1, allocation concealment) 68 km between two hospitals in Northumbria, UK. Markers of blood component quality were compared at 8, 14, 28 and 35 days following blood unit manufacture. There was no statistical difference in haemolysis, potassium concentration, total haemoglobin, glucose and lactate, haematocrit and mean cell volume, between the two groups, up to the date of unit expiry. The temperature of the packed red blood cell units did not deviate outside the recommended 2-10°C for transportation, regardless of the allocated group. Blood component transport was faster by drone, but did not reach statistical significance. This study demonstrates the feasibility and safety of flying blood components by drone between hospitals in the United Kingdom.

The Microenvironment of Solid Tumors: Components and Current Challenges of Tumor-on-a-Chip Models.

Solid tumors represent the most common type of cancer in humans and are classified into sarcomas, lymphomas, and carcinomas based on the originating cells. Among these, carcinomas, which arise from epithelial and glandular cells lining the body's tissues, are the most prevalent. Around the world, a significant increase in the incidence of solid tumors is observed during recent years. In this context, efforts to discover more effective cancer treatments have led to a deeper understanding of the tumor microenvironment (TME) and its components. Currently, the interactions between cancer cells and elements of the TME are being intensely investigated. Remarkable progress in research is noted, largely owing to the development of advanced in vitro models, such as tumor-on-a-chip models that assist in understanding and ultimately discovering new effective treatments for a specific type of cancer. The purpose of this article is to provide a review of the TME and cancer cell components, along with the advances on tumor-on-a-chip models designed to mimic tumors, offering a perspective on the current state of the art. Recent studies using this kind of microdevices that reproduce the TME have allowed a better understanding of the cancer and its treatments. Nevertheless, current applications of this technology present some limitations that must be overcome to achieve a broad application by researchers looking for a deeper knowledge of cancer and new strategies to improve current therapies.

Delving into Autophagy: Utilizing Natural Bioactive Compounds to Combat Alzheimer's Disease

Abstract: Autophagy involves breaking down entire cell components, including organelles and macromolecules found in the cytoplasm of eukaryotic cells, especially proteins with extended lifespans. Pharmacological, therapeutic, and herbal methods are crucial throughout this deteriorating phase. Autophagy is a widespread and historically conserved process that occurs in all eukaryotic cells. The significance lies in cell malfunction impacting the autophagy process, which is associated with various significant conditions such as neurological and metabolic disorders in the brain. The role of various autophagic genes is also important in the positive regulation of autophagy. This research will provide a concise summary of various forms of autophagy, their molecular processes, their relationships to neuronal health, and the function of natural chemicals in the enhancement of autophagy. However, the focus of this work is on different ways to encourage autophagy. It is possible to treat metabolic neurodegenerative illnesses by triggering this process with a range of herbal and natural substances. In this article, these topics are explored and debated.

What Structural Biology Tells Us About the Mode of Action and Detection of Toxicants.

The study of the adverse effects of chemical substances on living organisms is an old and intense field of research. However, toxicological and environmental health sciences have long been dominated by descriptive approaches that enable associations or correlations but relatively few robust causal links and molecular mechanisms. Recent achievements have shown that structural biology approaches can bring this added value to the field. By providing atomic-level information, structural biology is a powerful tool to decipher the mechanisms by which toxicants bind to and alter the normal function of essential cell components, causing adverse effects. Here, using endocrine-disrupting chemicals as illustrative examples, we describe recent advances in the structure-based understanding of their modes of action and how this knowledge can be exploited to develop computational tools aimed at predicting properties of large collections of compounds.

An Update on the Study of the Molecular Mechanisms Involved in Autophagy during Bacterial Pathogenesis.

Autophagy is a unique catabolic process that degrades irrelevant or damaged components in eukaryotic cells to maintain homeostasis and eliminate infections from pathogenesis. Pathogenic bacteria have developed many autophagy manipulation techniques that affect host immune responses and intracellular bacterial pathogens have evolved to avoid xenophagy. However, reducing its effectiveness as an innate immune response has not yet been elucidated. Bacterial pathogens cause autophagy in infected cells as a cell-autonomous defense mechanism to eliminate the pathogen. However, harmful bacteria have learned to control autophagy and defeat host defenses. Intracellular bacteria can stimulate and control autophagy, while others inhibit it to prevent xenophagy and lysosomal breakdown. This review evaluates the putative functions for xenophagy in regulating bacterial infection, emphasizing that successful pathogens have evolved strategies to disrupt or exploit this defense, reducing its efficiency in innate immunity. Instead, animal models show that autophagy-associated proteins influence bacterial pathogenicity outside of xenophagy. We also examine the consequences of the complex interaction between autophagy and bacterial pathogens in light of current efforts to modify autophagy and develop host-directed therapeutics to fight bacterial infections. Therefore, effective pathogens have evolved to subvert or exploit xenophagy, although autophagy-associated proteins can influence bacterial pathogenicity outside of xenophagy. Finally, this review implies how the complex interaction between autophagy and bacterial pathogens affects host-directed therapy for bacterial pathogenesis.

17 CDK4/6 inhibition with Abemaciclib in in patients (pts) with previously treated advanced renal carcinoma (RCC)

Abstract Background Preclinical data suggests rationale for CDK4/6 alone and in combination with HIF-2 inhibitors; single agent activity for CDK4/6 inhibitors in RCC has not been reported. Abemaciclib is an oral CDK4/6 inhibitor approved in combination with hormonal therapy for metastatic breast cancer. In our phase 1b clinical trial (NCT04627064), we investigated the safety and clinical efficacy of abemaciclib monotherapy in pts with advanced pretreated RCC with clear cell component. Methods In this single center trial, adult pts with advanced RCC with a clear cell component and ECOG status of ≤1 progressing after at least one prior regimen including immunotherapy and a VEGF TKI received abemaciclib 200 mg twice daily in 4-week cycles until progression or unacceptable toxicity. Primary objective was to evaluate the objective response rate (ORR) of abemaciclib with secondary endpoint of safety. First imaging was performed after 2 cycles. Response assessed per RECIST 1.1 and toxicity per CTCAE v5.0. Results 11 pts (10 clear cell RCC and 1 translocation RCC) were enrolled between 12/31/2020 and 10/03/2023. Median age was 62 years (range 54-68) with 18% (n=2) showing sarcomatoid features. 73% (n=8) had IMDC intermediate risk disease and one patient had translocation RCC (tRCC) with a clear cell component. Median number of prior therapies was 4 (range 1-9). Seven patients received 2 cycles and 4 patients received < 2 cycles. ORR was 0% (0/11; 8 progressive disease, 1 stable disease in tRCC stopping for clinical progression, 2 pts not evaluable with clinical progression). 27% (n=3) experienced grade ≥3 treatment-related adverse events (diarrhea n=1, nausea n=1, neutropenia n=1). Conclusions In pts with heavily pretreated RCC, abemaciclib had manageable toxicity profile but no clinically meaningful activity as monotherapy. This data will offer important insight into interpretation of results for ongoing trials exploring CDK4/6 inhibition in combination with HIF-2 inhibitors.

Nitrogen transformation as affected by decomposition of 15N‐labeled cover crop shoots and roots

AbstractBackgroundIncorporation of cover crop (cc) shoot and root biomass can have different effects on nitrogen (N) dynamics and the transformation of soil‐derived N and cc N.AimsThe objective was to determine the effects of different ccs, cc compartments (roots and shoots), and pretreatment of cc biomass (fresh vs. dried) on mineralization processes and on the transformation of soil and cc N following incorporation into a silty loam soil.MethodsSoil columns with incorporated 15N‐labeled root and shoot biomass of two cc species (winter rye and oil radish) and different pretreatments (dried and fresh) were incubated for 70 days at a constant temperature and soil moisture (8°C, 40% water‐filled pore space). Carbon and N transformation dynamics were determined repeatedly, distinguishing between N originating from cc biomass and from soil.ResultsNet CO2 emission was related to the amount of soluble cell components added with ccs. Net N mineralization was negatively related to the C:N ratio of cc biomass. The incorporation of dried cc biomass caused higher initial soil respiration and N immobilization than fresh biomass. All treatments with cc incorporation showed increased N2O emission. Emitted N2O‐N consisted mainly of cc N (55%–57%) in treatments with fresh shoot biomass, whereas soil N was the main source of N2O (75%) in the treatment with fresh oil radish roots. Recovery of cc 15N was affected by crop compartment and pretreatment. At the end of the incubation, it was 17.5%–42.3% in soil NO3−, 0.1%–8.1% in microbial biomass N, and less than 0.23% of cc N was found in cumulative N2O emission.ConclusionThe incorporation of cc roots and shoots had different effects on N mobilization and immobilization processes and on the partitioning of cc N. These processes can be influenced significantly by pretreatment of the added plant biomass (dried vs. fresh).

A device for real-time detection of gas generated from commercial lithium-ion cell

Abstract Lithium-ion batteries generate a large amount of flammable and toxic gases under abuse conditions. Research on the detection methods of gas generation from batteries is of great significance for understanding the reaction mechanism of batteries under abuse conditions, assessing the impact of gas generation on the health of occupants, and developing safer battery products. However, there is a lack of research reports on the real-time gas production behavior of commercial batteries. In this paper, a device for real-time detecting the gas component of the cylindrical lithium-ion cell is designed. Combined with a gas mass spectrometer can implement the real-time detection of the gas component of the lithium-ion cell. The device is used to explore the gas generation characteristics of lithium-ion cells in the overcharged state, and the influence of the material system and the degree of aging on the results are analyzed, verifying the feasibility of the device.

Inorganic Pb-Sn Perovskite Solar Cells with CF3-PA Internal Defect Passivation Strategy

Abstract The volatile organic components and heavy metal components in traditional perovskite solar cells (PSCs) have raised environmental and stability concerns for their large scale application. To solve the above two problems, the advancement of inorganic Pb-Sn PSCs technology has progressed at a remarkable pace over a relatively short period. Replacing Pb with Sn in PSCs not only significantly improves the environmental problems caused by the high toxicity of Pb, but also forms solar cells with lower bandgap, which is beneficial for light absorption and utilization, especially in the near-infrared band. In this work, a composite inorganic perovskite was utilized, CsPb0.6Sn0.4I3, and enhanced the PSCs performance by passivating the perovskite using 4-trifluoromethyl-phenylammonium (CF3-PA) additives. The highest efficiency of the champion device reached 13.04%, demonstrating its potential as a candidate for low bandgap PSCs.

Membrane-free stem cell components suppress osteoclast differentiation: Implications for oral regenerative treatment

Background/purposeMembrane-free stem cell components (MFSCCs) have been developed by removing cell membranes with antigens to overcome the limitations associated with cell-based therapies and isolate effective peptides. MFSCCs have been reported to have effects on oral infection sites. Chronic inflammatory diseases cause excessive bone resorption. This study investigated the effects of MFSCCs on osteoclast differentiation in the context of the high prevalence of inflammatory bone resorption. Materials and methodsBone marrow macrophages (BMMs) were treated with macrophage colony-stimulating factor and receptor activator of nuclear factor kappa-B ligand. Osteoclast differentiation was assessed based on the MFSCC concentrations. Tartrate-resistant acid phosphatase (TRAP)-stained mature osteoclasts and multinucleated cells derived from BMMs were analyzed using light microscopy. The messenger RNA (mRNA) expression levels of genes related to osteoclast differentiation were measured using real-time polymerase chain reaction (RT-PCR). The relative expression levels of the key transcription factors c-fos and nuclear factor of activated T cells (NFATc1) were determined using quantitative RT-PCR and western blotting. ResultsAfter treatment with MFSCCs, the cell viability was similar, depending on the level of BMMs. As the MFSCC concentration increased, the number of TRAP-positive cells decreased. The mRNA and protein expression of cathepsin K, TRAP, dendritic cell-specific transmembrane protein, c-fos, and NFATc1 decreased as the MFSCC concentration increased. ConclusionOur findings demonstrate that MFSCCs suppress osteoclast differentiation by downregulating transcription factors, particularly, c-fos and NFATc1. Therefore, MFSCCs may serve as a conservative treatment option for chronic inflammatory bone resorption diseases of the oral cavity by suppressing excessive bone resorption.