Complete System Research Articles

Modified receiver architecture in software-defined radio for real-time modulation classification

Automatic modulation classification (AMC) is an important process for future communication systems with prominent applications from spectrum management, and secure communication, to cognitive radio. The requirement for an efficient AMC classifier is due to its capability in blind modulation recognition, which is a difficult task in real scenarios where the limitations of traditional hardware and the complexity of channel impairments are involved. Therefore, this paper proposes a complete real-time AMC system based on software-defined radio and deep learning architecture. The system demodulation performance is verified through simulations and real channel impairment conditions to ensure reliability. With at most 6 times reduced number of parameters, two proposed models convolutional long short-term memory deep neural network and residual long short-term memory neural network also show a general improvement in classification accuracy compared with reference studies. The performance of these models at real-time AMC is tested with suitable processing time for practical applications.

Bringing the Value Chain for High-Impact Weather Warnings into the Classroom

Abstract University students can learn about weather warnings and contribute to a database for the World Meteorological Organization (WMO) project on Value Chain Approaches to Evaluate the End-to-End Warning Chain. The project offers students a way to understand how information about high-impact weather is created, shared, and used within a complete warning system for a selected event. Their contributions are intended to inform researchers and practitioners on what has and what has not worked well in the warning process. The students use a structured questionnaire designed to collect information on observations, forecasting, hazards, impacts, warning communications, and responses. Two institutions took contrasting approaches to using the questionnaire. At the University of Miami, teams of meteorology undergraduates evaluated the value chain for three hurricanes. Among the issues identified were the dynamic nature of the forecasts, misinterpretations of the products, social media influences, demographic factors, and disparities in responses. The Australian Bureau of Meteorology engaged student interns in different disciplines and experience levels to evaluate and contrast the warning value chains for domestic and international events. The students expressed enthusiasm for the exercises. Educational benefits included team collaboration, critical thinking, research and composition skills, a comprehensive view of weather events, understanding information flow, learning about new tools, and identifying gaps in practices. We encourage educators to adopt similar exercises to enable students to develop these skills, adopt value chain ideas, and contribute meaningfully to the community. The level of maintenance is low, and there is flexibility in how the exercises can be developed.

Chaotic Pattern and Solitary Solutions for the (21)-Dimensional Beta-Fractional Double-Chain DNA System

The dynamical behavior of the double-chain deoxyribonucleic acid (DNA) system holds significant implications for advancing the understanding of DNA transmission laws in the realms of biology and medicine. This study delves into the investigation of chaos patterns and solitary wave solutions for the (2+1) Beta-fractional double-chain DNA system, employing the theory of planar dynamical systems and the method of complete discrimination system for polynomials (CDSP). The results demonstrate a diverse spectrum of solitary wave solutions, sensitivity to perturbations, and manifestations of chaotic behavior within the system. Through the utilization of the complete discrimination system for polynomials, a multitude of novel solitary wave solutions, encompassing periodic, solitary wave, and Jacobian elliptic function solutions, were systematically constructed. The influence of Beta derivatives on the solutions was elucidated through parameter comparison analysis, emphasizing the innovative nature of this study. These findings underscore the potential of this system in unraveling various biologically significant DNA transmission mechanisms.

Integrated translation and metabolism in a partially self-synthesizing biochemical network.

One of the hallmarks of living organisms is their capacity for self-organization and regeneration, which requires a tight integration of metabolic and genetic networks. We sought to construct a linked metabolic and genetic network in vitro that shows such lifelike behavior outside of a cellular context and generates its own building blocks from nonliving matter. We integrated the metabolism of the crotonyl-CoA/ethyl-malonyl-CoA/hydroxybutyryl-CoA cycle with cell-free protein synthesis using recombinant elements. Our network produces the amino acid glycine from CO2 and incorporates it into target proteins following DNA-encoded instructions. By orchestrating ~50 enzymes we established a basic cell-free operating system in which genetically encoded inputs into a metabolic network are programmed to activate feedback loops allowing for self-integration and (partial) self-regeneration of the complete system.

Проектирование современных российских дробильно-перегрузочных установок для комплексов циклично-поточной технологии

The article discusses methodological aspects of designing semi-stationary and mobile crushing and transfer units (DPU) carried out by the experts of Uralmashzavod PJSC and IGD Ural Branch of the Russian Academy of Sciences on behalf of the Russian Metalloinvest company during the development of the Russian DPU-7200 model. As the result of the R&D work performed, a DPU was manufactured and installed at a mining operation as part of the in-pit crushing and conveyor (IPCC) systems, which is intended for conveyor transportation of ore from the open pit. A distinctive feature of the discussed DPU is that it is made as a complete system with the supporting steel structures integrated in its design, which makes it possible to relocate it during the service life when expanding the IPCC. The issues concerned with justifying the DPU layout, parameters of the receiving and unloading hoppers are discussed with account of structural, strength, mining and technological factors. The paper presents the technical characteristics of the developed DPU, as well as the design features of the primary equipment. The impact of the related technological factors, i.e. irregular character of dump truck traffic, the technological and temporal modes of the IPCC operation in general and those of the DPU in particular, the designed schedule of maintenance and repair, etc., is shown.

Проектирование современных российских дробильно-перегрузочных установок для комплексов циклично-поточной технологии

The article discusses methodological aspects of designing semi-stationary and mobile crushing and transfer units (DPU) carried out by the experts of Uralmashzavod PJSC and IGD Ural Branch of the Russian Academy of Sciences on behalf of the Russian Metalloinvest company during the development of the Russian DPU-7200 model. As the result of the R&D work performed, a DPU was manufactured and installed at a mining operation as part of the in-pit crushing and conveyor (IPCC) systems, which is intended for conveyor transportation of ore from the open pit. A distinctive feature of the discussed DPU is that it is made as a complete system with the supporting steel structures integrated in its design, which makes it possible to relocate it during the service life when expanding the IPCC. The issues concerned with justifying the DPU layout, parameters of the receiving and unloading hoppers are discussed with account of structural, strength, mining and technological factors. The paper presents the technical characteristics of the developed DPU, as well as the design features of the primary equipment. The impact of the related technological factors, i.e. irregular character of dump truck traffic, the technological and temporal modes of the IPCC operation in general and those of the DPU in particular, the designed schedule of maintenance and repair, etc., is shown.

A complete lean system design for team-oriented product development projects

Purpose The inherent variability on process times and demand are the factors that prevent the efficient application of lean philosophy in multi-project product development (PD) environments. Considering this variability, a hybrid push–pull project control system is developed, and value stream costing (VSC) analysis is performed to reflect the relation between project lead time, capacity and project cost. The assessment of the push/pull project control on lead time improvement and long-term savings on capacity have been aimed with the proposed complete design structure. Design/methodology/approach In a team-based structure, formed through clustering, push control techniques for planning tasks within cross-functional teams and pull control techniques for planning tasks between cross-functional teams are developed. The final step evaluates the proposed structure through VSC and long-term savings have been pointed out, especially in terms of freed-up capacity. For the validation of the proposed methodology, an office furniture manufacturing firm’s PD department has been considered and the performance of the hybrid system has been observed through simulation experiments and based on the simulation results, the lean system is evaluated by VSC. Findings The results of simulation experiments show a superior performance of the proposed hybrid push/pull project control mechanism under different settings of cycle time between projects or shortly project cycle time, dispatching rules within teams and variability levels. The results of the Box-Score (tool to apply VSC) indicate increased capacity in the long term to add extra projects during the planning period with the same project lead time and without additional cost. Research limitations/implications Although extensive simulation experiments have been performed to quantify the effect of project control structure and positive results have been reported on lead time and cost, the proposed design structure has not been tested in all existing PD environments. Originality/value To the best of authors’ knowledge, the quantification of the effect of hybrid project control with VSC is the first attempt to be applied in lean PD projects.

A complete lean system design for team-oriented product development projects

Purpose The inherent variability on process times and demand are the factors that prevent the efficient application of lean philosophy in multi-project product development (PD) environments. Considering this variability, a hybrid push–pull project control system is developed, and value stream costing (VSC) analysis is performed to reflect the relation between project lead time, capacity and project cost. The assessment of the push/pull project control on lead time improvement and long-term savings on capacity have been aimed with the proposed complete design structure. Design/methodology/approach In a team-based structure, formed through clustering, push control techniques for planning tasks within cross-functional teams and pull control techniques for planning tasks between cross-functional teams are developed. The final step evaluates the proposed structure through VSC and long-term savings have been pointed out, especially in terms of freed-up capacity. For the validation of the proposed methodology, an office furniture manufacturing firm’s PD department has been considered and the performance of the hybrid system has been observed through simulation experiments and based on the simulation results, the lean system is evaluated by VSC. Findings The results of simulation experiments show a superior performance of the proposed hybrid push/pull project control mechanism under different settings of cycle time between projects or shortly project cycle time, dispatching rules within teams and variability levels. The results of the Box-Score (tool to apply VSC) indicate increased capacity in the long term to add extra projects during the planning period with the same project lead time and without additional cost. Research limitations/implications Although extensive simulation experiments have been performed to quantify the effect of project control structure and positive results have been reported on lead time and cost, the proposed design structure has not been tested in all existing PD environments. Originality/value To the best of authors’ knowledge, the quantification of the effect of hybrid project control with VSC is the first attempt to be applied in lean PD projects.

Improved method for drone sound event detection system aiming at the impact of background noise and angle deviation

Drones pose a hidden threat to public safety, and effective and accurate detection technology for the drone that exist in the environment is imminent, in which how to weaken the influence of target sound source localization deviation and strong background interference noise on the detection task is the key to improve the accuracy of drone sound event detection. In this paper, a method has been proposed to improve the accuracy of drone acoustic event detection, named as the linear shrinkage-subspace projection-power spectral density filter method (LSP). This method mainly including covariance matrix reconstruction, steering vector recalibration, and filter coefficient redesign method. Firstly, based on Minimum Variance Distortionless Response, the linear shrinkage method is used to suppress the interference and noise components in the signal plus interference covariance matrix, and the sample covariance matrix is reconstructed to eliminate background interference noise. Then, the correlation between the steering vector and the eigenvector is used to eliminate the angle correlation term, and the subspace projection method is combined to recalibrate the steering vector, so as to improve the ability of the beamforming method to resist the angle deviation and realize the correction of the target source positioning deviation. Next, a redesign method for wiener filter coefficients based on the estimated power spectral density is used to further weaken background interference noise. In order to verify the accuracy of the proposed method, a complete drone sound event detection system is constructed by combining the deep learning drone sound event detection classifier, and the evaluation is carried out according to different angular deviations and interference sound distances. In addition, a new evaluation criterion is proposed, named as the Machine-Human Extreme Hearing Distance Rate (MHDR), which analogizes the system's detection ability with the ear's auditory detection ability. The research results of this article indicate that the detection accuracy of the detection system shows satisfactory accuracy when the proposed method is applied to circular microphone array, that improved by 15.12 % compared to existing methods. The proposed method improves the detection accuracy of the drone acoustic event detection task under the influence of sound source position deviation and strong background speech interference, and provides a reference for the development of anti-drone technology.

The mixed system of complementing the armed forces – a requirement for the Republic of Moldova

Military service is a complex social and legal phenomenon that is at the basis of the completion and functioning of the armed forces. Depending on the completion system, the armed forces may be composed of conscripts, volunteers and/or professional military personnel. Contractbased military service significantly contributes to strengthening the armed forces’ operationalcapabilities. Conscript military service is the main form for the military training of citizens who are later included in the reserve to ensure the mobilization of the army. The mixed system of complementing the armed forces organized in the Republic of Moldova responds to the interests of the military construction in the new security conditions after the start of the war in Ukraine.

The mixed system of complementing the armed forces – a requirement for the Republic of Moldova

Military service is a complex social and legal phenomenon that is at the basis of the completion and functioning of the armed forces. Depending on the completion system, the armed forces may be composed of conscripts, volunteers and/or professional military personnel. Contractbased military service significantly contributes to strengthening the armed forces’ operationalcapabilities. Conscript military service is the main form for the military training of citizens who are later included in the reserve to ensure the mobilization of the army. The mixed system of complementing the armed forces organized in the Republic of Moldova responds to the interests of the military construction in the new security conditions after the start of the war in Ukraine.

Real-time representation and rendering of high-resolution 3D light field based on texture-enhanced optical flow prediction

Three-dimensional (3D) light field displays can provide an immersive visual perception and have attracted widespread attention, especially in 3D light field communications, where 3D light field displays can provide face-to-face communication experiences. However, due to limitations in 3D reconstruction and dense views rendering efficiency, generating high-quality 3D light field content in real-time remains a challenge. Traditional 3D light field capturing and reconstruction methods suffer from high reconstruction complexity and low rendering efficiency. Here, a Real-time optical flow representation for the high-resolution light field is proposed. Based on the principle of 3D light field display, we use optical flow to ray trace and multiplex sparse view pixels. We simultaneously synthesize 3D light field images during the real-time interpolation process of views. In addition, we built a complete capturing-display system to verify the effectiveness of our method. The experiments' results show that the proposed method can synthesize 8 K 3D light field videos containing 100 views in real-time. The PSNR of the virtual views is around 32 dB and SSIM is over 0.99, and the rendered frame rate is 32 fps. Qualitative experimental results show that this method can be used for high-resolution 3D light field communication.

A Multi-Channel Data Simulator Based on the Time Unification System

In satellite and airborne electro-optical tracking systems, there are numerous processing devices and complex data flows. To ensure the coordinated operation of the system, the multiple devices within the target system must operate under unified time control for data acquisition, computation, and output. This study introduces a multi-channel data simulator based on a time unification system. The complete simulation system includes the host computer, simulator, target system, and time reference generator. The simulator has programmable input and output interfaces for multi-channel protocols and has storage and real-time working modes. In the storage mode, the simulated data are pre-transmitted to the simulator’s storage and sent to the target system according to the time reference generator. The simulator simultaneously stores the target system results. In the real-time mode, the host computer generates simulated data based on the target system’s results and outputs the data through the simulator in real time. The main contribution of the simulator is that it achieves system-level closed-loop simulation and completes the functional and performance verification of the target system. Through experimental verification, it is found that the simulator can achieve 4.2 Gbps of simulated data transmission and 1.6 Gbps of data reception and storage, with a closed-loop delay of 39.9 µs.

Development Of An Endoscopic, Absorption Corrected And Calibrated OH Laser Induced Fluorescence Probe System for High Pressure Combustion Diagnostics

We present the design and preliminary results of an endoscopic OH laser-induced fluorescence (LIF) system that is capable of acquiring 1D-line measurements in high pressure combustion processes within large-scale test facilities. The system can be exploited to acquire line-of-sight OH-chemiluminescence images and absorption corrected absolute OH-species concentration from which additionally temperature distribution can be extracted in case of lean mixtures in chemical equilibrium. Different critical components, such as light guides for high power UV laser pulses and flexible UV image guides, were first tested and characterized in a laboratory setup. Optimization regarding pulse energy and beam quality led to the selection of an 1m long hollow core fiber for laser light delivery as a central element for the experimental setup despite high losses caused by bending the fiber. The image transfer is accomplished by a 7m long flexible UV image bundle, which is preferred to the use of a rigid borescope in harsh environments. We designed the endoscopic UV optics using readily available parts and achieved an approximated image resolution of 21.6 line pairs/mm. Additionally, post-processing methods, such as flat-field correction, can improve the image quality substantially and remove the pixilation effect of the fiber bundle structure nearly completely. To validate the complete system, probe-based qualitative OH-LIF measurements were performed in a well-known laminar flame of a matrix burner, which serves as a mock-up for anticipated applications in an industrial test environment with a technology readiness level (TRL) greater than 4. The final step consists of the integration of the miniaturized optics into a cooled probe system which protects the sensitive optics against the harsh environment of an aero-engine sector combustor. For this purpose, two probe systems were designed to include, on the one hand, the endoscope optics together with the fiber image bundle end tip and, on the other hand, the laser emitting and receiving system for performing an absorption measurement needed to quantify the recorded LIF signal.

A High‐Speed Image Sensor Based on Large‐Area MoTe2/Si Photodiode Arrays

AbstractThe market demand for optoelectronic devices is increasing, leading to a need for low‐cost, high‐performance image sensors that can operate effectively in challenging environments such as darkness and fog. The emerging 2D transition metal dichalcogenides (TMDs) have garnered significant interest due to their exceptional optoelectronic properties and compatibility with silicon (Si) complementary metal oxide semiconductor (CMOS) technology. However, the large‐scale synthesis of TMD films and uniform preparation of photodiode arrays remain challenging. This paper reports a synthesis method for heteroepitaxial growth of 2H‐ molybdeum diyelluride (MoTe2) semiconducting films on 3D wafer‐level Si substrates. Using this method, arrays of 2H‐MoTe2/Si heterojunction photodiodes are prepared that demonstrate excellent uniformity and 100% device yield. The photodiodes exhibit satisfactory optoelectronic properties, including a small dark current maintained within a range of 1–3 nA and a maximum responsivity of 521.1 mAW−1 under near‐infrared light at 800 nm, with rise and fall times of less than 4 ms. To demonstrate the image‐sensing capabilities of the photodiode array under visible and near‐infrared (NIR) light illumination, a complete imaging system is designed.The MoTe2/Si photodiode arrays examined in this study offer a practical solution for integrating Si‐based readout circuits and photodetector arrays on a single chip.

Structural Insights into Ciona intestinalis Septins: Complexes Suggest a Mechanism for Nucleotide-dependent Interfacial Cross-talk

Septins are filamentous nucleotide-binding proteins which can associate with membranes in a curvature-dependent manner leading to structural remodelling and barrier formation. Ciona intestinalis, a model for exploring the development and evolution of the chordate lineage, has only four septin-coding genes within its genome. These represent orthologues of the four classical mammalian subgroups, making it a minimalist non-redundant model for studying the modular assembly of septins into linear oligomers and thereby filamentous polymers. Here, we show that C. intestinalis septins present a similar biochemistry to their human orthologues and also provide the cryo-EM structures of an octamer, a hexamer and a tetrameric sub-complex. The octamer, which has the canonical arrangement (2-6-7-9-9-7-6-2) clearly shows an exposed NC-interface at its termini enabling copolymerization with hexamers into mixed filaments. Indeed, only combinations of septins which had CiSEPT2 occupying the terminal position were able to assemble into filaments via NC-interface association. The CiSEPT7-CiSEPT9 tetramer is the smallest septin particle to be solved by Cryo-EM to date and its good resolution (2.7 Å) provides a well-defined view of the central NC-interface. On the other hand, the CiSEPT7-CiSEPT9 G-interface shows signs of fragility permitting toggling between hexamers and octamers, similar to that seen in human septins but not in yeast. The new structures provide insights concerning the molecular mechanism for cross-talk between adjacent interfaces. This indicates that C. intestinalis may represent a valuable tool for future studies, fulfilling the requirements of a complete but simpler system to understand the mechanisms behind the assembly and dynamics of septin filaments.

QUALITY OF LIFE AS AN INDICATOR OF OVERALL SOCIAL EFFICIENCY OF THE PUBLIC ADMINISTRATION SYSTEM

The article substantiates the need to assess the effectiveness of the public administration system in terms of its ability to ensure an adequate quality of life for the country's citizens. Based on a critical analysis of the main approaches to assessing the quality of public administration, the results of applying the index method and describes individual indices that allow assessing the efficiency and socio-economic orientation of public administration are given. The main methodological tasks are identified, the solution of which will allow to achieve maximum efficiency of the integrated indicator of quality of life. A conclusion is made about the importance of proper selection of indicators and formation of a sufficient and complete system of indicators for the evaluation procedure, with the aim of competent solution of management tasks.

Fuse replacement implementation by shaking table tests on hybrid moment-resisting frame

A seismic resilience enhanced structural system, called Hybrid Moment-Resisting Frame with Replaceable Energy Dissipation Angles (HMRF-REDA), is proposed with the advantage of cost-effective and easy replacement work. The system consists of energy dissipation bays (EDBs) featuring fuse connections and re-centering bays (RBs) constructed from high strength steel (HSS). The fuse connections are designed to concentrate damage on sacrificial and easy-to-repair elements in the presence of a concrete slab. The HSS members not only provide adequate load carrying capacity but also necessary re-centering capability essential for fuse replacement. In this research, shaking table tests were performed to investigate the seismic performance of HMRF systems and in particular, the feasibility of on-site fuse replacement within the complete structural system. The specimen was comprised of two parallel, three-story hybrid moment-resisting frames at a 1/2 scale. The results demonstrated that HMRF-REDA exhibited a multi-stage yielding sequence with damage restricted to the fuse elements for the expected deformation range. The HSS frame members were able to fully re-center the structure after it underwent an inner-story drift of up to 0.0235 rad. Furthermore, two on-site fuse replacement operations were successfully implemented within the structural systems, demonstrating the feasibility and ease of operation. The frames with replaced fuses exhibited similar elastic and inelastic performance when it experienced a preceding drift up to 0.0184 rad.

Genome mining approach reveals the CRISPR-Cas characteristics and diversity of targeting phages in Lactobacillus iners strains

This study utilized a genomic approach to investigate CRISPR-Cas systems, focusing on Lactobacillus iners strains, which are crucial for bacterial defense against bacteriophage attacks. Genome sequences were analyzed to understand the diversity, occurrence, and evolution of these systems. Spacer sequences within CRISPR arrays were examined to identify targeted phages. The research explored the evolutionary paths of spaceromes within each CRISPR array subtype, considering acquisition and deletion events influenced by phage pressure. Results revealed that approximately 50 % of L. iners strains possess complete CRISPR-Cas systems, predominantly subtype II-A and I-E. Homology analysis indicated that subtype I-E systems target a wider range of foreign phages compared to subtype II-A systems. Overall, the findings underscore the varied components and structure of CRISPR-Cas systems in L. iners strains, highlighting their role as active immune defenses against phages and foreign DNA.

Complete persistence of the primary somatosensory system in zebrafish

The somatosensory system detects peripheral stimuli that are translated into behaviors necessary for survival. Fishes and amphibians possess two somatosensory systems in the trunk: the primary somatosensory system, formed by the Rohon-Beard neurons, and the secondary somatosensory system, formed by the neural crest cell-derived neurons of the Dorsal Root Ganglia. Rohon-Beard neurons have been characterized as a transient population that mostly disappears during the first days of life and is functionally replaced by the Dorsal Root Ganglia. Here, I follow Rohon-Beard neurons in vivo and show that the entire repertoire remains present in zebrafish from 1-day post-fertilization until the juvenile stage, 15-days post-fertilization. These data indicate that zebrafish retain two complete somatosensory systems until at least a developmental stage when the animals display complex behavioral repertoires.