Chromaticity Coordinates Research Articles

Synthesis, luminescent and thermometric properties of the Tb3+ doped Gd2TeO6 phosphor

Gadolinium tellurate phosphor Gd2TeO6 pure and Tb3+ doped were successfully synthesised by solid-state reaction. The crystal structure and photoluminescence properties were characterised by X-ray powder diffraction (XRD) and fluorescence spectroscopy. The influence of Tb3+ concentration on the behaviour of the relative emission intensity and chromaticity coordinates were systematically investigated as a function of energy excitation and temperature. From the Tb3+ emission spectra the CIE (x,y) values and G/B = I(5D4 → 7F5)/I(5D4 → 7F6) ratio were calculated. While the G/B ratio is found temperature independent for all samples, the CIE runs from reddish to greenish region. The thermometric properties are also determined and a good relative thermal sensitivity Sr value 0.98 %K−1 was obtained. The investigation results show that these phosphors could be potentially interesting for use in white light-emitting devices as well as noncontact temperature sensors.

Optimization of Eu0.6Gd(0.4-x)TbxBO3 phosphor with Tb3+ concentration for X-ray screen material application

In this study, Eu0.6Gd(0.4-x)TbxBO3 (0.000 ≤ x ≤ 0.015) phosphors doped with varying concentrations of Tb3+ were synthesized using the solid-state reaction technique at a temperature of 900 °C for 18 h. X-ray diffraction (XRD) was employed to analyze the crystal structures of the Triclinic and Hexagonal phases corresponding to EuBO3 (ICSD No 01-089-7888) and EuBO3 (ICDD No 00-013-0485), respectively. The optical properties were analyzed through absorption excitation and emission spectra obtained via photoluminescence (PL) and radioluminescence (RL) techniques. The CIE chromaticity coordinates indicate a reddish-orange. The sample with x = 0.010 exhibited good optical efficiency under both PL (λex = 394) and RL. Furthermore, the radioluminescence performance of the x = 0.010 phosphor was 9.4% higher than that of the undoped phosphor. Samples responding to X-rays can be presented radiography, appearing brighter and clearer. This indicates that the samples exhibit favorable characteristics for application as an X-ray screen.

Full color control and patterned display device from cyan/magenta/yellow water-dispersed electrochromic polymer nanoparticles systems

Electrochromic polymers (ECPs) have great application potential in flexible displays, and there is an increasing expectation of using green methods to form ECP films. Herein, we propose a modified microemulsion method to prepare cyan/magenta/yellow (C/M/Y) water-dispersed electrochromic polymer nanoparticles (WDEN) systems. Three polymer films (WDECP-C/M/Y) maintain similar electrochemical properties compared to their corresponding organic solvent-based polymer films. It is intriguing that WDECP-C/M/Y exhibit better electrochromic properties in terms of higher cycling stability (97.24%, 95.05%, and 52.84%, respectively) and faster switching time (0.94 s, 1.09 s, and 1.34 s for coloring time, respectively) due to the introduction of nanoparticles. In addition, it can achieve various desired colors by blending the C/M/Y WDEN systems in different ratios. The calculated chromaticity coordinates of the blending polymer films show close values to the experimental observation, and the calculated ΔE * ab values range from 2.6 to 10.3, which may provide theoretical guidance for precisely color control. Finally, large-scale and patterned devices were assembled, which can achieve colored-to-colorless reversible electrochromism at a low driving voltage of 0–1.5 V. This work puts forward a universal and environmentally sustainable strategy to prepare WDEN systems, demonstrating their wide range of applications in display devices and electronic tags.

2D hybrid organic-inorganic perovskite displaying narrow-band violet-blue photoluminescence

Hybrid organic-inorganic perovskites represent a drastically expanding class of solid-state semiconducting materials for optoelectronics and photovoltaics. Thanks to the easy chemical tunability, this class of materials can offer emitters of very wide spectral range, however, violet-blue emitting hybrid perovskites still remain underrepresented. In this paper we report on a novel two-dimensional hybrid organic-inorganic perovskite (ethylammonium)2CdBr4. Crystal structure of the reported compound is composed of infinite inorganic 2D layers that are created by [CdBr6]4- octahedra connected in corner-by-corner manner. These layers are separated by organic ethyammonium cations which create hydrogen bonds with the inorganic part. Optical absorption measurements revealed the presence of a large band gap of 4.25 eV. Importantly, this material displays narrow photoluminescence band at 388 nm (full width at half maximum is 32 nm). Chromaticity coordinates of the perovskite emission are close to NTSC blue standard. Band structure and DOS calculations show that the states close to Fermi level predominantly originate from cadmium and bromide. Thus, here we offer a facile way towards violet-blue luminophore containing simple and widely available organic cation ethylammonium.

Effect of Li+ on luminescence properties and thermal stability of glass ceramics containing SrMoO4

Dy3+, Eu3+ co-doped glass ceramics (GCs) containing SrMoO4 crystalline phase were prepared by melt-curing-crystallization method. The most favorable heat treatment conditions for the glass ceramics were found to be 610 °C/2 h by differential scanning calorimetry (DSC), ultraviolet spectrophotometer (UV–Vis), X-ray diffraction (XRD) and scanning electron microscopy (SEM). The best doping concentrations of Dy3+ and Eu3+ in this glass ceramic were 0.8 % and 0.6 %, concentration quenching caused by dipole-dipole interactions occurs when the content of rare earth ions in GCs continues to increase. The chromaticity coordinates of the Dy3+- Eu3+ co-doped glass ceramics changed from cool white light to warm white light with the addition of Eu3+ concentration. At the optimal doping concentration (0.8 % Dy3+-0.6 % Eu3+), the chromaticity coordinate of glass ceramics is (0.3972, 0.3331), and the related color temperature is 3047 K. The luminescence intensity can still reach about 80 % of room temperature at 180 °C, and its thermal quenching activation energy is 0.233 eV. This suggests that glass ceramics have excellent thermal stability. After adding an appropriate amount of Li+, the crystalline phase of the glass ceramics remained unchanged and the luminous intensity of the glass ceramics increased by a factor of about 1.4 in the same environment. The thermal quenching activation energy of the glass ceramic doped with 0.2 % Li+-0.8 % Dy3+-0.6 % Eu3+ was 0.344 eV. The experimental results indicate that GCs has potential application prospects in the field of solid-state lighting.

Yellowish light emitting Dy3+ doped single phase – BaNb2O6 phosphors for solid state lighting applications

BaNb2O6:Dy3+ phosphors that emit cool light has been synthesized via traditional solid-state reaction technique. Developed samples show orthorhombic structure with space group C2221 according to X-Ray Diffraction (XRD) and Rietveld structural refinement. Observations made using a scanning electron microscope (SEM) show densely packed particles with irregular shapes in the micrometre range. Optical bandgap was also determined using Diffuse Reflectance Spectroscopy (DRS). When excited at 389 nm, the as-prepared phosphors show blue (481 nm) and yellow (577 nm) emissions, which correspond to the 4F9/2 → 6HJ (J = 15/2, 13/2) transitions of Dy3+ ions. A thorough investigation has been done on the energy transfer process between Dy3+ ions. The optimized phosphor's computed chromaticity coordinates for the Commission Internationale de L'Eclairage (CIE) are x = 0.392 and y = 0.414. The values of CIE chromaticity coordinates and correlated colour temperature (CCT) of 3995 K endorse near cool light emission from the phosphor. Thermal stability and temperature dependent photoluminescence spectroscopy were studied for optimized phosphor which revealed that the phosphor can be a potential material for lighting applications at higher temperature. The study also reveals that BaNb2O6:Dy3+ phosphor could be a promising candidate for near ultra-violet (NUV) excited, yellowish LED applications.

Structure, luminescence properties, and energy transfer of Dy3+/Sm3+ co-doped BCAZM glasses for white LED applications

B2O3–CaO–Al2O3–ZnO–MoO3 luminescent glasses doped with Dy3+, Sm3+, and Dy3+/Sm3+ were prepared by melt-quenching method. Structure, luminescence properties, energy transfer and thermal stability of the glasses were analysed. As deduced from the increase in density, [BO4] unit proportion and Dy3+ luminescence yellow/blue ratio and the decrease in band gap value, the increase in the doping concentration of Sm2O3 promotes the formation of non-bridging oxygen and enhances the structural asymmetry. Meanwhile, the change in Dy3+ emission intensity and the decrease in fluorescence lifetime indicate the presence of an energy transfer from Dy3+ to Sm3+, and the Inokuti-Hirayama model fit suggests that the energy transfer may occur within the Dy3+-Sm3+ cluster. In addition, the CIE chromaticity coordinates and correlated colour temperature of the Dy3+/Sm3+ co-doped B2O3–CaO–Al2O3–ZnO–MoO3 glass fall within the white light region and have good thermal stability, which is potentially promising for application in W-LED lighting.

Preparation, Structures, Photoluminescence and Semiconductive Properties of Two Novel Lanthanide Mercury Materials with a 3-D Framework Structure.

Two novel lanthanide mercury materials, [Gd(IA)3(H3O)2Hg3Br6]n·2nCl (1) and [La(IA)3(H3O)2Hg3Br6]n·2nCl (2) (IA = isonicotinic anion), have been prepared under solvothermal conditions and characterized by single-crystal X-ray diffraction techniques. They are isomorphic and characterized by a three-dimensional (3-D) framework structure. The lanthanide ions are bound by eight oxygen atoms to exhibit a square antiprismatic geometry. The solid-state photoluminescence experiment discovers that compound 1 shows a strong emission in the red region. Compound 1 possesses CIE (Commission Internationale de I'Éclairage) chromaticity coordinates of 0.7347 and 0.2653. Its CCT (correlated color temperature) is 6514 K. Compound 2 displays yellow photoluminescence and it has CIE chromaticity coordinates of 0.4411 and 0.5151. The CCT of compound 2 is 3633 K. Solid-state UV/Vis diffuse reflectance spectra revealed that their semiconductor band gaps are 2.16 eV and 2.85 eV, respectively.

Blue-excitable orange-red-emitting M3Y(PO4)3:Pr3+ (M = Ba, Sr, Ca) phosphors for multifunctional applications.

Research on multifunctional luminescent materials has become an emerging trend for new applications of optical sensing, monitoring, anticounterfeiting, lighting, etc. Herein, a library of Pr3+-doped M3Y(PO4)3 (M = Ba, Sr, Ca) phosphors was prepared for careful spectroscopic studies in potential lighting and optical temperature sensing applications. With the help of density functional theory calculation, diffuse reflectance spectra, and steady/dynamic photoluminescence spectra, the effects of alkaline earth metals on the fluorescence properties of M3Y(PO4)3:Pr3+ were studied systematically. Under the excitation of blue ∼ 445 nm, orangish-red fluorescence of approximately 602 nm was efficiently detected due to Pr3+ 1D2 → 3H4 transition, which becomes stronger by regulating alkaline-earth elements from Ba to Sr and to Ca. An optimized Ca3Y(PO4)3:0.7%Pr3+ sample was validated with excellent thermal stability 89%@423 K and further applied to fabricate a white light emitting diode by combining with commercial YAG:Ce3+ phosphors on a 445 nm blue chip. Specifically, CIE chromaticity coordinates (0.3510, 0.3650) and correlated color temperature (∼ 4838 K) were obtained for an obvious improvement. Moreover, optical thermometry properties of Ca3Y(PO4)3:0.7%Pr3+ were explored on basis of Pr3+ 3P0-3P1 thermally coupled energy levels. Their fluorescence intensity ratios following the Boltzmann equation could be operated over 298-598 K with superior relative sensitivity ∼ 0.87% K-1 at 298 K. These interesting results for multifunctional luminescence will greatly promote the development of novel Pr3+-doped luminescent materials as well as the related photoelectric devices.

Europium‐Activated Perovskite Cubical SrZrO3 Red Phosphor: Synthesis, Characterization, and Sustainable Applications in PC‐LEDs and Environmental Forensic Analysis

AbstractA series of SrZrO3 : Eu3+ nano phosphors synthesized by a modified high‐temperature solid‐state reaction method. The structural, functional vibration groups, optical, morphological, luminescence and quantum yield studies were characterized through XRD, FTIR, UV, ‘SEM & HR‐TEM’ and PL analyses respectively. The SrZrO3 : Eu3+ phosphor has a perovskite orthorhombic structure and emits intense red emission around 612 nm when it is excited under 465 nm and covers NUV light range. The calculated average lifetime indicates the nature of the allowed emission transition in Eu3+ (2.44 μs). The calculated colour purity and Commission International del’ Eclairagethe (CIE) chromaticity coordinates are 97.9 % and (0.5894, 0.4031) respectively. The observed quantum yield and thermal stability for the SrZrO3 : Eu3+ (9 mol %) phosphor are 22 % and 87 % at 423 K, respectively. These obtained results suggest that SrZrO3 : Eu3+ (9 mol %) phosphor would meliorate for red‐emitting phosphor in profound RGB‐based pc‐WLED applications.

High-efficiency luminescent Eu3+ heavily doped glass prepared from black talc: A promising material for significant applications in W-LED illumination

As a distinguished luminescent matrix, rare earth (RE)-doped glass has garnered considerable attention across lighting, display, laser, and related domains. Nonetheless, the limited luminescent efficiency of such glass imposes constraints on its extensive utilization. In addressing this challenge, we have developed a novel formulation involving heavily Eu3+-doped black talc glass, boasting exceptional optical characteristics. Structural examination has validated the successful synthesis of the parent glass matrix comprising [SiO4] and [AlO4] units. With the escalating of Eu3+ doping concentrations, the glass manifested an upward trend in both density and refractive index. Under the excitation of 393 nm light, the glass exhibited strong red light emission, demonstrating a high internal quantum efficiency (IQE) of up to 84.67 %, surpassing markedly other Eu3+-doped glass variants. Furthermore, even under elevated temperatures reaching 150 °C, the glass retained 86.2 % of its luminescent intensity at room temperature, indicative of superior thermal resilience vis-à-vis alternative glass systems. As a proof-of-concept, we encapsulated a white light-emitting diode (W-LED) assembly employing a 395 nm LED chip, Eu3+-doped glass, BaMgAl10O17:Eu2+ blue phosphor, and Ba2SiO4:Eu2+ green phosphor. The resultant device exhibited favorable chromaticity coordinates (0.3566, 0.3994), boasting a correlated color temperature (CCT) of 4791K and a high color rendering index (CRI) of 91. In summary, this investigation employs black talc ore to synthesize luminescent glass, thereby not only diversifying the application scope of black talc but also augmenting its additional value, while notably enhancing the luminescent efficiency of the glass through heavy Eu3+ doping. Through empirical validation, the significant potential benefits of Eu3+-doped black talc glass in the realm of W-LED lighting were convincingly demonstrated.

Photoluminescence of Platinum(II) Complexes with Diazine-Based Ligands.

In the last past twenty years, research on luminescent platinum (II) complexes has been intensively developed for useful application such as organic light emitting diodes (OLEDs). More recently, new photoluminescent complexes based on diazine ligands (pyrimidine, pyrazine, pyridazine, quinazoline and quinoxaline) have been developed in this context. This review will summarize the photophysical properties of most of the phosphorescent diazine Pt(II) complexes described in the literature and compare the results to pyridine analogues whenever possible. Based on the emission color, and the photoluminescence quantum yield (PLQY) values, the relationship between structure modification, and photophysical properties are highlighted. Tuning of emission color, quantum yields in solution and solid state and, for some complexes, aggregation induced emission (AIE) or thermally activated delayed fluorescence (TADF) properties are described. When emitting OLEDs have been built from diazine Pt(II) complexes, the external quantum efficiency (EQE) values and luminance for different emission wavelengths and in some cases, chromaticity coordinates obtained from devices, are given. Finally, this review highlights the growing interest in studies of new luminescent diazine Pt(II) complexes for OLED applications.

P‐147: Highly Efficient Pure Blue ZnSeTe Based Quantum Dot Light Emitting Diodes with Top‐emitting Structure

The application of non‐Cd quantum dots in future display technologies is promising due to their environmental friendliness. However, their low efficiency and broad emission linewidth limit their practical usage. Here, we report the fabrication of ZnSeTe quantum dots based blue light emitting diode (QLED) with different amounts of Te doping and top‐emitting structure. By regulating the thickness of the electron transport layer, we achieve electrical and optical balance control in QLED. Ultimately, we obtain a blue QLED with a emission wavelength of 461 nm, a current efficiency of 5.8 cd/A and a pure blue chromaticity coordinates of (0.13, 0.08).

Monometallic heteroleptic complexes of Dy(III) ion incorporating β-diketone and ancillary moieties: Photophysical and electrochemical analyses

Several luminescent ternary dysprosium complexes were synthesized and examined using diketone ligand 1,3-diphenylprop-1,3-dione (DPD) and various auxiliary ligands. Spectroscopic analysis was carried out to determine the structural and photophysical features of Dy (III) complexes. IR and proton NMR spectroscopic studies suggested the bonding of chelating moieties to the metal ion through oxygen and nitrogen atom. The optical and electronic band gap is evaluated which proposed the conducting behaviour of dysprosium complexes. Upon excitation with UV radiation, three distinct emission peaks of the Dy (III) ion are appeared at about 485 nm (J = 15/2), 575 nm (13/2) and 664 nm (11/2) corresponding to the transitions of type 4F9/2 → 6HJ. The strongest emission peak obtained at ∼ 575 nm is responsible for yellow emission of Dy (III) complexes. The yellow to blue (Y/B) ratio estimated for the transition J = 13/2 / J = 15/2 were found to be in the range of 4.19 – 2.80. The quantum yield was also determined for the Dy (III) complexes which is as: Φ1 = 0.315, Φ2 = 0.261, Φ3 = 0.183, Φ4 = 0.157. The synthesized dysprosium complexes demonstrate luminescence lifetime in decreasing order i.e. 0.600 ms > 0.510 ms > 0.431 ms > 0.323 ms. Furthermore, the chromaticity coordinates also confirm their yellow luminous behavior. These newly synthesized complexes could be utilized for developing systems significant for lighting, OLEDs and displays due to their luminous features.

Changes in the Physicochemical and Bioactive Properties of Yerba Mate Depending on the Brewing Conditions.

Yerba Mate drink made from dried and crushed leaves and twigs of Paraguayan holly (Ilex paraguariensis A. St.-Hil.), which is a valuable source of bioactive substances, in particular antioxidants. The available literature lacks data on changes in the content and profile of bioactive compounds such as tannins, caffeine, the phenolic acid profile of flavonoids and carotenoids, as well as total polyphenol content and antioxidant activity in Yerba Mate infusions depending on different brewing conditions, and how different brewing conditions affect the physicochemical properties of these infusions. Therefore, this study evaluated the physicochemical properties of dried and Yerba Mate infusions prepared via single and double brewing processes at 70 °C and 100 °C. The organoleptic evaluation, as well as the instrumental color measurement, showed significant changes in the total color difference (ΔE) and the L*a*b* chromatic coordinates of dried Yerba Mate samples and their infusions. Moreover, the research showed higher contents of tannins (mean 1.36 ± 0.14 g/100 g d.m.), caffeine (mean 17.79 ± 3.49 mg/g d.m.), carotenoids (mean 12.90 ± 0.44 μg/g d.m.), phenolic acids (mean 69.97 ± 7.10 mg/g d.m.), flavonoids (mean 5.47 ± 1.78 mg/g d.m.), total polyphenols (mean 55.26 ± 8.51 mg GAE/g d.m.), and antioxidant activity (mean 2031.98 ± 146.47 μM TEAC/g d.m.) in single-brewed Yerba Mate infusions compared to double-brewed (0.77 ± 0.12 g/100 g d.m., 14.28 ± 5.80 mg/g d.m., 12.67 ± 0.62 μg/g d.m., 57.75 ± 8.73 mg/g d.m., 3.64 ± 0.76 mg/g d.m., 33.44 ± 6.48 mg GAE/g d.m. and 1683.09 ± 155.34 μM TEAC/g d.m., respectively). In addition, infusions prepared at a lower temperature (70 °C) were characterized by a higher content of total polyphenols and higher antioxidant activity, in contrast to the tannin and carotenoid contents, the levels of which were higher at 100 °C than at 70 °C. Considering the high amount of bioactive ingredients, in particular antioxidants, and a wide range of health benefits, it is worth including Yerba Mate in the daily diet.

Investigating the influence of carbon dots on β-Ca2SiO4:Ce3+ phosphors derived from agro-waste for diverse applications

A series of blue-emitting composite based on 3 wt% carbon dots in β-Ca2SiO4:Ce3+ (3 wt% CDs@β-CSO:Ce3+) was synthesized through a hydrothermal method, aiming to enhance applications in latent fingerprint (LFP) detection, anti-counterfeiting (AC) measures, and optical thermometry. The X-ray diffraction (XRD) analysis confirmed that these phosphors possess a monoclinic crystal structure. Under 356 nm excitation, the Ce3+ doped β-Ca2SiO4 phosphors (β-CSO:Ce3+) display a broad blue emission peak at 431 nm, attributed to the 5d → 4f electric dipole transition of Ce3+, while the inclusion of Carbon dots (CDs) shifts this emission to 442 nm. This shift and the improved photoluminescence (PL) intensity are thought to result from the Fӧrster Resonance Energy Transfer (FRET) mechanism. The optimal concentration of Ce3+ ions was determined to be 5 mol%, as higher concentrations led to a decrease in emission intensity due to concentration quenching (CQ). Additionally, a fabricated white light diode using these phosphors achieved chromaticity coordinates of (0.344, 0.330) according to the Commission International de L'Eclairage (CIE), with the CIE, correlated colour temperature (CCT), and colour purity (CP) metrics indicating a bright green output with values of (0.1486, 0.0433), 1759 K, and 96.4%, respectively. The optimized 3 wt% CDs@β-CSO:5Ce3+ composite demonstrated a remarkable CP of 99.9%. Notably, the phosphors maintained 85.77% of their emission intensity at 423 K, showcasing exceptional thermal stability. A novel approach utilizing sketch pen and brush mode was developed to apply the optimized AC security ink, allowing for the creation of various intricate patterns. The resulting AC tags featured high resolution and durability. These findings underscore the 3wt%CDs@β-CSO:5Ce3+ composite as superior luminescent materials for use in fields requiring LFP, AC strategies, and optical thermometry.

Novel Tb³⁺-Doped LaAl₂B₄O₁₀ phosphors: Structural analysis, luminescent properties, and energy transfer mechanism

This study explores the structural and luminescent properties of terbium (Tb³⁺)-doped lanthanum aluminium borate (LaAl₂B₄O₁₀, abbreviated as LAB) phosphors, a novel host lattice for Tb³⁺ doping. LAB:Tb³⁺ phosphors, with varying dopant concentrations, were synthesized using a microwave-assisted combustion synthesis approach and characterized using X-ray diffraction (XRD), Rietveld refinement, and photoluminescence spectroscopy at both room and low temperatures. The structural analysis confirmed the hexagonal crystal structure of LAB and revealed successful incorporation of Tb³⁺ ions without altering the fundamental lattice. Luminescence studies demonstrated that the LAB:Tb³⁺ phosphors show strong green emission primarily attributed to the 5D4→7F5 transition of Tb³⁺. The optimal doping concentration was determined to be 5 wt% Tb³⁺, which provided maximum luminescence efficiency. This concentration also allowed for a critical study of energy transfer mechanisms within the phosphor, revealing dipole-dipole interactions with a critical distance of 9.80 Å between Tb³⁺ ions. Additionally, the CIE chromaticity coordinates of LAB:0.05 Tb³⁺ were precisely determined to be (0.289, 0.4460), indicating the potential for high-quality green emission suitable for solid-state lighting and display technologies. This work not only demonstrates the potential of LAB:Tb3+ as a highly efficient green luminescent material, but also sheds light on the mechanisms responsible for energy transfer and concentration quenching.

Luminescence properties of Tb3+ -doped sodium phosphate glasses for green laser and X-ray imaging application

Tb3+ doped sodium-gadolinium-aluminum-phosphate glass samples (PGNA) with chemical compositions 30Na2CO3:8Gd2O3:5Al2O3:(57- x)P2O5: x Tb4O7 (where x=0, 0.25, 0.5, 1.0, 2.0, 3.0, 4.0, and 5 mol. %) were manufactured by using adopting the conventional melt quenching technique. The PXRD study of the prepared samples was used to confirm the amorphous structure. FE-SEM, EDS, and FTIR studies were carried out to analyze the elemental and structural characteristics of synthesized glasses. The X-ray induced luminescence spectra were obtained at room temperature and the emission peak at 311 nm corresponding to Gd3+ transition was observed decreasing with the increase of Tb4O7 concentrations, while emission peak intensities corresponding to Tb3+ electronic transitions increased with the concentrations of Tb4O7. The results from the photoluminescence (PL) studies in the UV–Vis–NIR region showed the glasses emitting intense green light with the highest peak at 544 nm under excitations at 220, 272, and 311 nm. The PL emission intensities were found reasonably high under characteristic excitations of both Gd3+ and Tb3+, peaking at 380, 414, 437, 489, 544, 584, and 623 nm, which corresponding to 5D3→7F6,5D3→7F5, 5D3→7F4, 5D4→7F6, 5D4→7F5, 5D4→7F5, 5D4→7F4, 5D4→7F3 transitions, respectively. The decay time of Tb3+ ions has been observed to decrease when the concentration of Tb4O7 increases. The energy transfer from Gd3+ to Tb3+ was found increased with increasing of Tb3+ concentrations. The CIE 1931 chromaticity coordinates of Tb doped PGNA glasses were found to be in the green range, indicating a strong potential for green laser application. The results from X-ray imaging showed that Tb-doped glass scintillators promise of efficient and low-cost solution for X-ray imaging applications.

Investigations of structural, photoluminescence, colorimetric, lifetime, and luminous efficiency of Tb3+ and Sm3+ co-doped calcium tungstate for WLEDs

Structure, photoluminescence, colorimetric, and thermoluminescence analysis of Ca1-x-yTb2x/3Sm2y/3WO4; x = 0.01; y = 0.01–0.05 ceramics are reported in this manuscript. The materials are made by the use of the solid-state method. Reitveld refinements of the obtained X-ray diffraction patterns are done by using the Fullprof Suite software. The obtained results denoted that the synthesized materials have a tetragonal structure and I41/a space group. Energy bandgaps are found in the UV–visible absorbance spectra. Photoluminescence investigations of the phosphors are done. The critical quenching concentrations of the phosphor are found to be x = 0.01; and y = 0.04. Moreover, the critical distance of energy shift with the adjacently presented ions is computed. Dexter’s theory is employed to elucidate that the dipole-dipole electronic interactions are the imperative reasons for the transfer of energy in the phosphor. The white color of emission is achieved for x = 0.01, y = 0.04 Tb, and Sm doped CaWO4 material. Moreover, great values in color purity, correlated color temperature, color rendering index as well as luminous efficiency of radiation are obtained from the CIE Chromaticity coordinates. Quantum yield efficiency of x = 0.01, y = 0.04 Tb & Sm codoped CaWO4 is measured. Photoluminescence decay analysis of all the samples is done to study the long-after glow properties and also the average lifetime values are evaluated. This is an indication of the suitable usage of the prepared materials in the white light-emitting diodes. Concentration as well as dose-dependent Thermoluminescence spectroscopy is investigated thoroughly. Kinetic parameters are calculated by deconvoluting the spectra of x = 0.01; y = 0.01 Tb & Sm codoped CaWO4 irradiated with 15 min of UV excitation dose. These results are denoted by high trap depth, second-order kinetics, and low UV dosimetry of the phosphor.

Mn(II)-Based Metal Halide with Near-Unity Quantum Yield for White LEDs and High-Resolution X-ray Imaging.

Metal halides have drawn great interest as luminescent materials and scintillators due to their outstanding optical properties. Exploring new types of phosphors with easy production processes, excellent photophysical properties, high light yields, and environmentally friendly compositions is crucial and quite challenging. Herein, a novel Mn(II)-based metal halide (4-BTP)2MnBr4 was produced using a facile solvent evaporation method, which exhibited a strong green emission peaking at 524 nm from the d-d transition of tetrahedral-coordinated Mn2+ ion and a near-unity quantum yield. The prepared white light-emitting diode device has a wide color gamut of 100.7% NTSC with CIE chromaticity coordinates of (0.32, 0.32). In addition, (4-BTP)2MnBr4 demonstrates excellent characteristics in X-ray scintillation, including a high light yield of 98 000 photons/MeV, a sensitive detection limit of 37.4 nGy/s, excellent resistance to radiation damage, and successful demonstration of X-ray imaging with high resolution at 21.3 lp/mm, revealing the potential for application in diagnostic X-ray medical imaging and industry radiation detection.