ABSTRACT In this study, we experimentally investigate the production and characterization of CaCO3 particles through the carbonation process of Ca(OH)2 and evaluate their potential application in removing organic matter. The CaCO3 particles were characterized using BET, SEM-EDX, FT-IR, particle size, and XRD techniques. Adsorption of organic matter was studied using synthetic solutions and samples from two surface water sources. Experiments were conducted at room temperature with adsorbent dosages ranging from 1.3 to 21.5 g/L, initial dissolved organic carbon concentrations between 2.5 and 20 mg/L (initial loading: 0.1–14.6 mgDOC/gCaCO3), and a contact time of at least 5 minutes. We observed a removal efficiency of 70–80% for DOC and 90–95% for UV254 at a low concentration of organic matter (humic acids, 2.5 mgDOC/L). At a concentration of 5.0 mg DOC/L, we achieved (i) 70–90% DOC removal for humic acid, (ii) 50–65% DOC removal for one surface water sample with SUVA254 of 2.4 L/mg·m, and (iii) 20–35% DOC removal for another surface water sample with SUVA254 of 4.3 L/mg·m. Furthermore, we investigated the performance of the prepared particles in repeated usage for organics removal. In conclusion, our findings propose areas for future research including optimizing particle cycling within the reaction environment, exploring particle utilization in reactors such as an up-flow particle bed, and assessing potential applications in a membrane contactor. The environmentally friendly and non-toxic nature of CaCO3 particles emphasizes their significance in future research and applications.