Changes In Height Research Articles

Optimized NMC622 electrodes with a high content of the active material: A comprehensive study

The composition of lithium-ion battery positive electrodes, incorporating an active material, conductive carbon additives, and a binder, fundamentally influences the electrode physical and electrochemical characteristics. In this study, the properties of positive electrodes with a high amount of an active material (LiNi0.6Mn0.2Co0.2O2 98 wt-%), were tested with different ratios of carbon nanotubes (CNTs) and carbon black (CB) additives, along with varying amounts of a PVDF binder. Consequently, the electrode rate capability improves with the increase of CNTs up to 30 wt-% in the total conductive carbon share and increasing the binder amount to 1 wt-%, attributed to the optimal balance of inactive material amount. The optimal composition is determined to be 98 wt-% NMC622, 1 wt-% PVDF, and 1 wt-% total conductive carbons, out of which CNT shares accounting for 30 wt-%. Furthermore, this study continues by comparing the optimal composition with the reference electrode (CNT-free) to assess the impact of CNTs on electrochemical performance. With CNTs present, the electrode attains higher energy density and specific capacity owing to uniform conductive network. Operando XRD and dilatometry experiments also reveal that CNTs reduce irreversible height change during cycling and minimize anisotropic lattice changes, thus enhancing capacity retention.

Footwear-Based Assistive Technology for Lower Limb Amputees

Men and women with lower limb amputations struggle with managing the balance between prosthesis alignment and shoe heel rise. A novel prosthetic ankle-feet system is being developed to support a wider range of footwear options for men and women with lower limb amputations. Each rigid foot is customized to fit the footwear of choice and can be rapidly attached to (or released from) an ankle unit which remains attached to the prosthesis. The proposed system consists of two key components: a transmitter shoe and a receiver shoe. The transmitter shoe is worn on the intact limb and is equipped with sensors, including accelerometers and gyroscopes to capture the wearer's ankle movements accurately. These sensor data are wirelessly transmitted to the receiver shoe worn on the amputated limb, which houses actuators, such as stepper motors, to replicate the natural ankle movements. The hypothesis was that the orientation of the roll-over shapes of these systems would be altered with even small changes in shoe heel height. Seven prosthetic ankle-foot systems were mechanically loaded to determine their roll-over shapes while using a no-heel shoe and a low-heel shoe. This system was developed specifically to allow users the ability to switch between shoes of different heel heights (i.e., it is a heel-height-adjustable system). Additional loading trials were performed with the heel-height-adjustable system in which the ankle alignment was altered to accommodate the change in heel height between shoes.

Morphological evolution of nano-droplets impinging on cylindrical wall: A molecular dynamics study

The impact of droplets on solid walls is the primary behavior in spray cooling, seawater desalination, self-cleaning, and other technological processes. Based on the molecular dynamics (MD) method, the morphological evolution characteristics of nanodroplets impinging on the copper cylinder wall are studied. The effects of droplet size, initial velocity, impact position, and wall wettability on nanodroplet dynamics are analyzed. The results indicate that a single nanodroplet impacting on a nanocylinder exhibits four distinct impact modes: spread-partially wrapped-deposition (SPD), spread-completely wrapped-deposition (SCD), spread-completely wrapped-splitting-deposition (SCSD), and spreading-partially wrapped-splitting-deposition (SPSD). The trend of the influence of initial velocity and droplet size on the impact mode is similar. As the initial velocity and droplet size increase, the droplet’s kinetic energy and inertia force increase, successively exhibiting the SPD, SCD, and SCSD modes. The trend of the influence of impact position and wall wettability on the droplet impact mode is similar. When the impact eccentricity distance is small, and the wall is highly hydrophilic, it exhibits the SCD mode. With increasing impact eccentricity and enhanced wall hydrophobicity, the adhesion force between the droplet and the cylinder wall decreases, making the droplet less likely to be captured and more prone to splitting, exhibiting the SPSD mode. The change in droplet centroid height and mean square displacement could predict whether the droplet undergoes a splitting mode, and its influence is most significant at the impact position. Constrained by the cylindrical wall, the droplet impacts radially and spreads primarily in that direction. With the enhancement of wall hydrophilicity, the migration region of the three-phase contact line expands, and the droplet spreading transforms into synchronous development along the radial and axial directions. The research results can enrich the dynamic mechanism of micro-nano scale droplet impact and provide potential guidance for optimizing relevant technologies.

Study of the ability of SWOT to detect sea surface height changes caused by internal solitary waves

Study of the ability of SWOT to detect sea surface height changes caused by internal solitary waves

Klein Tunneling in β12 Borophene.

Motivated by the recent observation of Klein tunneling in 8-Pmmn borophene, we delve into the phenomenon in β12 borophene by employing tight-binding approximation theory to establish a theoretical mode. The tight-binding model is a semi-empirical method for establishing the Hamiltonian based on atomic orbitals. A single cell of β12 borophene contains five atoms and multiple central bonds, so it creates the complexity of the tight-binding model Hamiltonian of β12 borophene. We investigate transmission across one potential barrier and two potential barriers by changing the width and height of barriers and the distance between two potential barriers. Regardless of the change in the barrier heights and widths, we find the interface to be perfectly transparent for normal incidence. For other angles of incidence, perfect transmission at certain angles can also be observed. Furthermore, perfect and all-angle transmission across a potential barrier takes place when the incident energy approaches the Dirac point. This is analogous to the "super", all-angle transmission reported for the dice lattice for Klein tunneling across a potential barrier. These findings highlight the significance of our theoretical model in understanding the complex dynamics of Klein tunneling in borophene structures.

The Study of Mode-switching Behavior of PSR J0614+2229 Using the Parkes Ultra–wide-bandwidth Receiver Observations

In this paper we present a detailed single-pulse and polarization study of PSR J0614+2229 based on the archived data observed on 2019 August 15 (MJD 58710) and 2019 September 12 (MJD 58738) using the ultra−wide-bandwidth low-frequency receiver on the Parkes radio telescope. The single-pulse sequences show that this pulsar switches between two emission states, in which the emission of state A occurs earlier than that of state B in pulse longitude. We found that the variation in relative brightness between the two states varies temporally and both states follow a simple power law very well. Based on the phase-aligned multifrequency profiles, we found that there is a significant difference in the distributions of spectral index across the emission regions of the two states. Furthermore, we obtained the emission height evolution for the two emission states and found that, at a fixed frequency, the emission height of state A is higher than that of state B. What is even more interesting is that the emission heights of both states A and B do not change with frequency. Our results suggest that the mode switching of this pulsar is possibly caused by changes in the emission heights that alter the distributions of spectral index across the emission regions of states A and B, resulting in frequency-dependent behaviors, i.e., intensity and pulse width.

Optimizing strength training protocols in young females: A comparative study of velocity-based and percentage-based training programs

The purpose of this study was to compare the effects of velocity-based strength training (VBT) and percentage-based strength training (PBT) on absolute strength, explosive strength, speed, and agility, as well as markers of muscle damage after 6 weeks of exercise programs. The study included 30 young female individuals, divided into three groups of 10 participants: VBT, PBT, and control group. The main findings indicated that the VBT group and PBT group showed significant improvement in 1RM squat exercise (Δ% 27.87 and Δ% 8.98, respectively) and 1RM bench press (Δ% 14.47 and Δ% 8.65, respectively), but a greater enhancement was observed in the VBT group. In addition, VBT induced substantial changes in SJ (Δ% 14.32) and CMJ height (Δ% 7.69), while PBT had an improvement only in the SJ test (Δ% 6.72). The improvement noted in the VBT group could be attributed to its ability to tailor training intensity according to the speed of movement execution. This approach allows athletes to perform each repetition as fast as possible, thus maintaining an optimal intensity for explosive strength development. The capacity of VBT to adapt training intensity based on the speed of movement execution may be the key factor contributing to these results. Therefore, coaches and athletes should consider implementing VBT as a valuable tool to optimize strength and power development. In conclusion, VBT induced greater improvement in the 1RM squat, 1RM bench press, SJ, and CMJ compared to the group that performed the traditional strength training modality. Therefore, VBT is considered a more effective training tool regarding the development of absolute and explosive strength in young women.

Estimation of the band alignment of metal/AlScN interfaces by hard X-ray photoelectron spectroscopy

This paper describes the band alignment of metal/AlSc(O)N measured using hard X-ray photoelectron spectroscopy. The band offset was determined by using the difference in binding energy from the core level to the upper edge of the VB, and the bandgap was determined from the energy loss spectrum of photoelectrons. The introduction of oxygen into AlScN to make AlScON decreases both the conduction band and VB offsets. The change in barrier height of the metal/AlScN structure is very small relative to the difference in the work function of the metal. This suggests that Fermi-level pinning occurs at the metal/AlScN interface.

Spatial and temporal coverage of the cargo ship network for GNSS-based tsunami detection

Tracking changes in sea-surface height with ship-based GNSS can be used to detect tsunamis. One year of navigation data from ships in the Pacific is examined to investigate how well-distributed a cargo-ship network would be for tsunami detection. There is excellent coverage of the most active tsunamigenic zones, with multiple ships predicted within 30-minutes travel time of notable tsunamis. Tsunamigenic regions with low ship density, such as the Southwest Pacific, require a greater percentage of ships participating to ensure sufficient data. The global nature of GNSS and ship routes make this a promising, low-cost approach, to augment tsunami detection.

A new approach to contact angle measurement and effects of evaporation on the contact angle

The solid material's wettability behavior is determined by the contact angle value. The wettability of materials is critical in the coating, lubricating, and insulating industries. In high-tech industries including corrosion resistance, water-oil separation, medical material production, implant technology, and friction reduction, the contact angle is very important. A new method called the full angle method was used to measure the contact angle and compared with current methods. The wettability behavior of plexiglass, which is employed in a variety of applications ranging from lighting to decorating, and industrial designs to accessory production, was explored in this study. The measurement of the contact angle was done by dropping 1.8 M (molar) of saltwater over the plexiglass materials. In order to examine the effect of evaporation on the contact angle, changes in contact angle, height and baseline were investigated depending on the waiting time.

Longitudinal changes in body mass index, height, and weight in children with acute myeloid leukemia

BackgroundThis study reported height prediction and longitudinal growth changes in Chinese pediatric patients with acute myeloid leukemia (AML) during and after treatment and their associations with outcomes.MethodsChanges in 88 children with AML in percentages according to the growth percentile curve for Chinese boys/girls aged 2–18/0–2 years for body mass index (BMI), height, and weight from the time of diagnosis to 2 years off therapy were evaluated. The outcomes of AML were compared among patients with different BMI levels.ResultsThe proportion of underweight children (weight < 5th percentile) increased significantly from the initial diagnosis to the end of consolidation treatment. The proportion of patients with low BMI (BMI < 5th percentile) was highest (23.08%) during the consolidation phase, and no children were underweight, but 20% were overweight (BMI > 75th percentile) after 2 years of drug withdrawal. Unhealthy BMI at the initial diagnosis and during intensive chemotherapy leads to poorer outcomes. For height, all patients were in the range of genetic height predicted based on their parents’ height at final follow-up.ConclusionsPhysicians should pay more attention to the changes in height and weight of children with AML at these crucial treatment stages and intervene in time.

Evaluating the reliability of bi-temporal canopy height model generated from airborne laser scanning for monitoring forest growth in boreal forest region

ABSTRACT The discrepancies in data across different phases and the unexplored optimal spatial resolution present challenges when using multi-temporal canopy height models to accurately discern actual forest growth. In this study, we evaluated the reliability of bi-temporal CHMs to characterize growth changes in a boreal natural forest over a four-year period. A maximum mosaic method was introduced to construct a CHM from various flight strips, aimed at minimizing data alignment errors. Subsequently, the canopy height and height changed derived from six different height percentile metrics and five spatial resolutions were evaluated. The results showed that higher resolution (e.g., < 2 m) and lower height metrics (e.g., 85th height percentile) consistently underestimated. Tree growth correlation with individual segmentation surpassed field-measurements at all resolutions and height metrics. for the optimal resolution and height metrics, the results suggest that using a 95th height percentile the 10 m scale effectively represents both canopy height ( R 2012 2 = 0.95, RMS E 2012 = 0.88 m, rRMS E 2012 = 5.83%; R 2016 2 = 0.96, RMS E 2016 = 1.11 m, rRMS E 2016 = 6.91%) and height changes ( R 2 = 0.59, RMSE = 0.86 m, rRMSE = 18.38%). This study demonstrates the necessity of carefully evaluating data characteristics and resolutions when employing multi-temporal CHM for forest dynamics monitoring.

The Effects of Football Training on Improving Aerobic Skills, Technique, and Anthropometry in Goalkeepers

Objectives. The study aimed to assess the impact of football training, particularly for goalkeepers, on children’s motor skills and aerobic capacity over a 10-month period. Materials and methods. This experimental study focused on evaluating the specific skills of goalkeepers and the aerobic capacities of children who took on the role of goalkeeper after undergoing training. The study involved totally 20 individuals aged 10-14 who played as goalkeepers and who were part of the entire population trained at the Real Madrid Foundation UNY Football School. The changes in the goalkeeperʼs aerobic capacity, reaction speed, and diving, as well as anthropometric measurements were found in the study. The instruments used for this research included a multi-stage fitness test, a test of the goalkeeperʼs reaction and diving skills, as well as height and weight measurements. The data analysis technique used was the t-test to determine differences in variables between the pretest and post-test, with a significance level of less than 0.05 (P &lt; 0.05). Results. The results revealed significant improvements in aerobic endurance (P = 0.004), reaction ability (P = 0.007), and goalkeeper diving (P = 0.002) after 10 months of football training. However, there were no significant changes in height, weight, and BMI, as the P value was greater than 0.05. Conclusions. These findings have important implications for evaluating goalkeeper training programs and provide a basis for recommending more effective ones.

An Ellipsoidal Plate Motion Model of the Indo‐Australian Tectonic Plate

AbstractWe present a class of “ellipsoidal rotation matrices” which can be used to characterize tectonic plate motion; where geocentric Cartesian coordinates travel along paths tangential to the ellipsoid. We contrast them with conventional Euler pole plate motion models which are more closely aligned with spherical coordinate systems and inherently induce a change in geodetic ellipsoidal height. We demonstrate the use of each in the Indo‐Australian tectonic plate setting, which is known to move approximately 7 cm/year in a north‐northeast direction. Geocentric Datum of Australia 2020 (GDA2020) coordinates are “plate‐fixed” static coordinates obtained using a conventional Euler pole plate motion model to align time dependent coordinates with the 2014 realization of the International Terrestrial Reference Frame at the epoch 2020.0. We show that this Euler pole plate motion model can introduce ellipsoidal height velocities of up to −0.2 mm/year. This is small but systematic, so pertinent for consideration with high accuracy vertical land motion studies using GDA2020 coordinates and velocities. We further investigate the comparative statistical accuracy of conventional Euler pole and the ellipsoidal models with respect to characterizing plate motion captured in high quality Global Navigation Satellite System data.

Sustainable utilization of incineration bottom ash in pavement construction: Environmental impacts and life cycle assessment

The global drive towards sustainable development has prompted a notable shift in civil engineering practices towards utilizing secondary materials, such as incineration bottom ash (IBA). The literature review underscores the relevance of waste incineration and the crucial need for effective IBA management strategies. Existing studies, however, reveal a dearth of studies within the life cycle assessment (LCA) framework focusing on understanding IBA characteristics and field conditions. The study addresses this gap by proposing an LCA to assess the environmental implications of substituting natural aggregates with IBA in pavement layers. A comparative LCA was carried out, where different scenarios of reuse of IBA (as produced, treated, or with restrictions) were assessed against a baseline scenario that represents the conventional use of aggregates in roads and landfilling of IBA. The ReCiPe technique, incorporating a hierarchist perspective, was employed to assess impacts across different problem-oriented categories. Additionally, this study also explores the impact of data variability on LCA outcomes, considering changes in landfill height, pavement infiltration rate, time duration, and IBA transportation distance. The analysis indicates that incorporating IBA in road layers can significantly reduce impacts on non-toxic categories like global warming by over 35 %. However, the leaching properties of untreated IBA contribute to a more than 28 % increase in human carcinogenic toxicity, rendering it environmentally unsuitable for road layer reuse. The comparative study illustrated that reusing treated IBA is the most sustainable approach, remaining effective up to a distance of d + 15 km. In cases where treatment is not feasible, utilizing IBA with restrictions is recommended up to a distance of d + 5 km (d represents the transportation distance for natural materials). This research fills a critical gap in the literature by providing a framework to assess IBA reuse in road construction, thereby advancing the discourse on sustainable materials management in the construction industry.

The hyperplasia of the mammary gland effect of the Mongolian Remedy RuXian-I in rats reduced by estrogen and progesterone via inhibition of MAPK and NF-κB pathways

Background: The aim of the present study was to evaluate whether the HMG (Hyperplasia of the Mammary Gland) effect of RuXian-I in estrogen- and progestogen- induced HMG rats is mediated through the activation of MAPK (Mitogen activated protein kinase) and NF-κB signaling pathways. Materials and methods: Fifty virgin female Wistar rats were randomly divided into in control and HMG, RuXian-I (0.75 g·kg−1, 1.5 g·kg−1, 3 g·kg−1, respectively) groups, 10 in each. Injections of estrogen and progestogen were given to establish rat models of HMG and RuXian-I at the same time. Changes in nipple heights were measured; pathologic changes of HMG in rats were also observed under a light microscope; the phosphorylation levels of MAPK and NF κB and the expression levels of TNF-α and IL-1β were measured. Results: Compared with the control group, the nipple diameters and height were increased significantly, the numbers of MG lobules were increased, there were changes in breast histopathology, the levels of TNF-α and IL-1β increased significantly, and MAPK and NF-κB were activated in HMG rats. Compared with the HMG model group, the increased nipple height was decreased, the numbers of MG lobules were reduced, the degree of HMG in rats was alleviated obviously, and the phosphorylation level of MAPK and NF-κB and cytokines TNF- α and IL-1β levels in serum were decreased by RuXian-I treatment. Conclusion: Those results suggest RuXian-I has protective and therapeutic effects on HMG rats induced by estrogen and progestogen and is likely to activate MAPK and NF-κB signaling pathways.

Percutaneous Endoscopic Suprapedicular Decompression in the Treatment of Down-Migrated Lumbar DiscHerniation

[OBJECTIVE]: This study aimed to investigate the clinical efficacy of percutaneous endoscopic suprapedicular decompression in treatment of down-migrated lumbar disc herniation. [METHODS]: The clinical data of 43 patients with down-migrated lumbar disc herniation treated with endoscopic surgery at our hospital between January 2022 and January 2023 were retrospectively analysed. Twenty-two and 21 patients underwent percutaneous endoscopic decompression using the suprapedicular and TESSYS approaches, respectively. The perioperative, follow-up, and imaging data of the groups were compared. [RESULTS]: Surgery was uneventful in both groups. The number of intraoperative fluoroscopies and duration of surgery were significantly lower in the suprapedicular group (p<0.05). The patients in both groups were followed up for at least 12 months. At the last follow-up, lumbar pain and leg pain visual analogue scale (VAS), Oswestry Disability Index (ODI), and 36-Item Short Form Health Survey (SF-36) scores were significantly improved in both groups compared with preoperative values (p<0.05); the differences in these indexes between the two groups were not significant preoperatively (p>0.05). However, at the last postoperative follow-up, lumbar pain VAS scores were significantly better in the suprapedicular group (0.83±0.85 vs. 2.54±1.32, p<0.05). There was no significant change in intervertebral space height or lumbar lordotic angle compared with preoperative values in either group at the last follow-up (p>0.05). However, the spinal canal cross-sectional area significantly increased (p<0.05). [CONCLUSION]: The treatment of down-migrated lumbar disc herniation via a suprapedicular approach enabled the incision of the superior margin of the pedicle as needed under direct vision, involved less fluoroscopy while preserving facet joint stability, and enabled targeted removal of the herniated nucleus pulposus, thus greatly reducing residual nucleus pulposus. This surgical procedure was safe, rapid, and showed satisfactory therapeutic efficacy.

Retrospective Evaluation of Condyle and Ramus Asymmetry with Ortopantomography in Dentate and Total Edentulous Patients

Objectives: A symmetrical facial appearance affects people's social relationships. Mandibular asymmetry directly effects the facial appearance and may have many morphological and functional causes. Clinically healthy individuals may experience complete edentulousness in advancing ages, which may lead to asymmetry in the condyles and facial appearance. Our aim in this study is to evaluate whether fully-toothed and total edentulous conditions cause changes in the vertical height of the condyle and ramus and also asymmetry. Material and Methods: A total of 200 patients (104 female, 96 male) with 100 fully-toothed and 100 edentulous were included in the study. Right and left condylar ramus were measured and recorded according to the asymmetry measurement index of Habets et al., with using tracing paper under the reflector light on the patients' orthopantomographic images. Statistical analysis was done using SPSS:22 package program. T-tests, Mann-Whitney U and chi-square tests were used for comparisons. P &amp;lt;0.05 were considered significant. Results: In previous studies, the difference between the genders was found to be statistically insignificant, therefore we evaluated men and women together. In our research, the mean of the condyle and ramus height asymmetry index in edentulous patients was 4.76 mm and 2.12 mm respectively, and the mean of the condyle and ramus height asymmetry index in fully-toothed patients was 4.88 mm and 2.34 mm, respectively. According to the t-test, the mean of the condyle height and ramus height asymmetry index was found to be higher in fully-toothed patients but this difference was not statistically significant (p&amp;gt;0.05). Conclusion: Although condylar asymmetry was more common than ramus asymmetry in this study, this difference was not statistically significant when total edentulous and fully-toothed patients were compared. Keywords: Habets technique; condylar asymmetry; ramus asymmetry

Real-Time Detection of Yeast Growth on Solid Medium through Passive Microresonator Biosensor.

This study presents a biosensor fabricated based on integrated passive device (IPD) technology to measure microbial growth on solid media in real-time. Yeast (Pichia pastoris, strain GS115) is used as a model organism to demonstrate biosensor performance. The biosensor comprises an interdigital capacitor in the center with a helical inductive structure surrounding it. Additionally, 12 air bridges are added to the capacitor to increase the strength of the electric field radiated by the biosensor at the same height. Feasibility is verified by using a capacitive biosensor, and the change in capacitance values during the capacitance detection process with the growth of yeast indicates that the growth of yeast can induce changes in electrical parameters. The proposed IPD-based biosensor is used to measure yeast drop-added on a 3 mm medium for 100 h at an operating frequency of 1.84 GHz. The resonant amplitude of the biosensor varies continuously from 24 to 72 h due to the change in colony height during vertical growth of the yeast, with a maximum change of 0.21 dB. The overall measurement results also fit well with the Gompertz curve. The change in resonant amplitude between 24 and 72 h is then analyzed and reveals a linear relationship with time with a coefficient of determination of 0.9844, indicating that the biosensor is suitable for monitoring yeast growth. Thus, the proposed biosensor is proved to have potential in the field of microbial proliferation detection.

Multi-Parameter Experimental Research on the Expansion Force Affecting Lime-Sand Piles under Preloading Pressure

Aiming at the problems that it is difficult to control the expansion force of lime-sand pile in the foundation correcting and how the upper existing structural pressure affects the expansion force of lime-sand pile, this paper adopts a new type of lime-sand pile reaction tester to carry out the experimental research on the expansion force of lime-sand pile under the influences of different pre-pressure, different mixing ratios, different heights, and different granular sizes. The purpose of this paper is to explore the influence of the pre-pressure brought by the existing building structure on the expansion force of the lime-sand pile and the coupling effect of the pre-pressure and other influencing factors on the expansion force of the lime-sand pile through the multi-parameter test. The results show that with the increase in pre-pressure, the expansion force of the lime-sand pile shows the trend of increasing first and then decreasing when the pre-pressure is 0.88 KN, the effect is most obvious and its expansion force can be increased by 14.9%. Within a certain range, the larger the proportion of quicklime is, the lower the expansion reaction force is. The expansion force of the lime-sand pile with the ratio of lime/sand/soil of 5:4:1 is the most ideal, and its value reaches 10.2 KN, which is 10% and 15.3% higher than the rest of the two groups, respectively. Within a certain range, the effect of specimen height change on the expansion force of the lime-sand pile is almost negligible. The smaller particle size of quicklime makes its reaction speed faster, the reaction degree is more full, and the expansion force is greater. The expansion force of the small particle size group was 12.1% and 34.2% higher than that of the medium and large particle size groups, respectively.