Shape Changes Research Articles

Tunable zero-field magnetoresistance responses in Si transistors: Origins and applications

The near-zero-field magnetoresistance (NZFMR) response has proven to be a useful tool for studying atomic-scale, paramagnetic defects that are relevant to the reliability of semiconductor devices. The measurement is simple to make and, in some cases, simple to interpret. In other cases, more sophisticated modeling based on the stochastic Liouville equation (SLE) is needed to access valuable information from NZFMR results. It has been shown that hyperfine and dipolar coupling interactions at atomic-scale defects affect the NZFMR line shape, but experimental parameters related to the detection method of NZFMR can also affect the nature of the response. Here, we demonstrate four distinct NZFMR detection methods in Si MOSFETs, which all access identical Si/SiO2 interface defects. In all four cases, we show that the line shape of the response is tunable based on experimental parameters alone. Using SLE-based modeling, we verify that time constants connected to physical carrier capture rates at the defect sites lead to these NZFMR line shape changes. The results demonstrate a method to extract some atomic-scale information for the purpose of defect identification. They also have broader applications to the continued development of ultra-sensitive magnetometers based on NZFMR in semiconductors. Additionally, the NZFMR effect in common Si-based devices may provide an inexpensive and accessible platform that mimics similar radical pair mechanisms that have become increasingly important in various biology fields.

Numerical Simulation of the Interaction between a Planar Shock Wave and a Cylindrical Bubble

Three-dimensional (3D) computational fluid dynamics (CFD) simulations have been carried out to investigate the complex interaction of a planar shock wave (Ma = 1.22) with a cylindrical bubble. The unsteady Reynolds-averaged Navier–Stokes (URANS) approach with a level set coupled with volume of fluid (LSVOF) method has been applied in the present study. The predicted velocities of refracted wave, transmitted wave, upstream interface, downstream interface, jet, and vortex filaments are in very good agreement with the experimental data. The predicted non-dimensional bubble and vortex velocities also have great concordance with the experimental data compared with a simple model of shock-induced Rayleigh–Taylor instability (i.e., Richtmyer–Meshkov instability) and other theoretical models. The simulated changes in the bubble shape and size (length and width) against time agree very well with the experimental results. Comprehensive flow analysis has shown the shock–bubble interaction (SBI) process clearly from the onset of bubble compression up to the formation of vortex filaments, especially elucidating the mechanism on the air–jet formation and its development. It is demonstrated for the first time that turbulence is generated at the early phase of the shock cylindrical bubble interaction process, with the maximum turbulence intensity reaching about 20% around the vortex filament regions at the later phase of the interaction process.

The role of forensic odontology and dental anthropology:An approach to forensic issues

Dental treatment essential to justice Action, review of evidence, appropriate evaluation and presentation of dental examination results. Most involve the use of teeth and oral samples for identification in a legal context. Dental anthropology, on the other hand, provides information such as characteristics of teeth, tooth morphology, size and shape changes, restoration, disease, tooth loss, wear pattern, dentistry, color and teeth. Dental records are also useful for comparing teeth; this can help determine a person's age, gender, race or ethnicity, personality and occupation, all of which can take on meaning on their own. The dental profession plays an important role as well as the responsibility to maintain accurate dental records to provide the necessary information to assist in the identification of victims. This article provides an overview of how forensic odontology and dental anthropology play an important role in identifying individuals and finding ways to resolve legal issues.

Transitional chelal digit patterns in saprophagous astigmatan mites

Changes in the functional shape of astigmatan mite moveable digit profiles are examined to test if Tyrophagus putrescentiae (Acaridae) is a trophic intermediate between a typical micro-saprophagous carpoglyphid (Carpoglyphus lactis) and a common macro-saprophagous glycyphagid (Glycyphagus domesticus). Digit tip elongation in these mites is decoupled from the basic physics of optimising moveable digit inertia. Investment in the basal ramus/coronoid process compared to that for the moveable digit mastication length varies with feeding style. A differentiated ascending ramus is indicated in C. lactis and in T. putrescentiae for different trophic reasons. Culturing affects relative investments in C. lactis. A markedly different style of feeding is inferred for the carpoglyphid. The micro-saprophagous acarid does not have an intermediate pattern of trophic functional form between the other two species. Mastication surface shape complexity confirms the acarid to be heterodontous. T. putrescentiae is a particularly variably formed species trophically. A plausible evolutionary path for the gradation of forms is illustrated. Digit form and strengthening to resist bending under occlusive loads is explored in detail. Extensions to the analytical approach are suggested to confirm the decoupling of moveable digit pattern from cheliceral and chelal adaptations. Caution is expressed when interpreting ordinations of multidimensional data in mites.

Filamentous morphology engineering of bacteria by iron metabolism modulation through MagR expression

The morphology is the consequence of evolution and adaptation. Escherichia coli is rod-shaped bacillus with regular dimension of about 1.5 μm long and 0.5 μm wide. Many shape-related genes have been identified and used in morphology engineering of this bacteria. However, little is known about if specific metabolism and metal irons could modulate bacteria morphology. Here in this study, we discovered filamentous shape change of E. coli cells overexpressing pigeon MagR, a putative magnetoreceptor and extremely conserved iron-sulfur protein. Comparative transcriptomic analysis strongly suggested that the iron metabolism change and iron accumulation due to the overproduction of MagR was the key to the morphological change. This model was further validated, and filamentous morphological change was also achieved by supplement E. coli cells with iron in culture medium or by increase the iron uptake genes such as entB and fepA. Our study extended our understanding of morphology regulation of bacteria, and may also serves as a prototype of morphology engineering by modulating the iron metabolism.

Soft skeletons transmit force with variable gearing.

A hydrostatic skeleton allows a soft body to transmit muscular force via internal pressure. A human's tongue, an octopus' arm and a nematode's body illustrate the pervasive presence of hydrostatic skeletons among animals, which has inspired the design of soft engineered actuators. However, there is a need for a theoretical basis for understanding how hydrostatic skeletons apply mechanical work. We therefore modeled the shape change and mechanics of natural and engineered hydrostatic skeletons to determine their mechanical advantage (MA) and displacement advantage (DA). These models apply to a variety of biological structures, but we explicitly consider the tube feet of a sea star and the body segments of an earthworm, and contrast them with a hydraulic press and a McKibben actuator. A helical winding of stiff, elastic fibers around these soft actuators plays a critical role in their mechanics by maintaining a cylindrical shape, distributing forces throughout the structure and storing elastic energy. In contrast to a single-joint lever system, soft hydrostats exhibit variable gearing with changes in MA generated by deformation in the skeleton. We found that this gearing is affected by the transmission efficiency of mechanical work (MA×DA) or, equivalently, the ratio of output to input work. The transmission efficiency changes with the capacity to store elastic energy within helically wrapped fibers or associated musculature. This modeling offers a conceptual basis for understanding the relationship between the morphology of hydrostatic skeletons and their mechanical performance.

Design and Analysis Method of Piezoelectric Liquid Driving Device with Elastic External Displacement.

In piezoelectric drive, resonant drive is an important driving mode in which the external elastic force and electric drive signal are the key factors. In this paper, the effects of the coupling of external elastic force and liquid parameters with the structure on the vibrator resonance frequency and liquid drive are analyzed by numerical simulation. The fluid-structure coupling model for numerical analysis of the elastic force was established, the principle of microdroplet generation and the coupling method of the elastic force were studied, and the changes in the resonant frequency and mode induced by the changes in the liquid parameters in different cavities were analyzed. Through the coupled simulation and calculation of the pressure and deformation of the cavity, the laser vibration measurement test was carried out to test the effect of the vibration mode analysis. The driving model of the fluid jet driven by the elastic force on the piezoelectric drive was further established. The changing shape of the fluid jet under different elastic forces was analyzed, and the influence law of the external elastic force on the change in the droplet separation was determined. It provides reference support for further external microcontrol of droplet motion.

Aerodynamic design optimization of locally built FSR Isuzu bus through numerical simulation

Reducing the fuel consumption of commercial vehicles—especially those used for public transportation—has become increasingly important due to advancements in the automotive industry. On the other hand, the main disadvantages of buses and other commercial vehicles are their fuel consumption, exhaust pollutants, and crosswind stability. Most buses built in Ethiopia have aerodynamic rectangular shapes and strong drag resistance forces, which lead to higher fuel consumption. One of the most accessible buses in Ethiopia is the FSR Isuzu Bus; its external body is locally constructed and has a poor aerodynamic shape. The primary goal of this study is to reduce aerodynamic drag force by improving the outer body shape of the current FSR Isuzu Bus. It also aims to examine the impact of roughness (strip) on the overall aerodynamic characteristics of the bus when it encounters crosswinds, thereby reducing fuel consumption, roll moment, and side force. For computational fluid dynamics (CFD) analysis, ANSYS Fluent is used, and Solidwork is used to model the bus body. A comparison is made between the current CFD analysis of the bus body and the modified design at varying speeds. Three separate models are used in the analysis. At an average speed of 100 kmph, 29.58% (4 to 5 liters) of fuel can be saved, and the drag force is reduced by roughly 49.7% when comparing the new concept to the current bus. By utilizing a strip on the bus’s roof, the side force coefficient and the roll moment coefficient are subsequently reduced from model two to model three by 8.76% and 9.01%, respectively. The study’s conclusions indicate that the external body shape changes have reduced drag; and, adding roof strips has decreased drag to acceptable level and enhanced crosswind stability.

On the Role of Starchy Grains in Ice Nucleation Processes.

Little is known about the role of starchy food on climate change processes like ice nucleation. Here, we investigate the ice nucleation efficiency (INE) of eight different starchy food materials, namely, corn (CO), potato (PO), barley (BA), brown rice (BR), white rice (WR), oats (OA), wheat (WH), and sweet potato (SP), in immersion freezing mode under mixed-phase cloud conditions. Notably, among all these food materials, PO and BA exhibit the highest ice nucleation efficiency with ice nucleation temperatures as high as -4.3 °C (T50 ∼ -7.0 ± 0.5 °C) and -6.5 °C (T50 ∼ -7.2 ± 0.2 °C), respectively. We also explore the effect of environmentally relevant physicochemical conditions on ice nucleation efficiency, including different pH, temperature, UV/O3/NOx exposure, and various cocontaminants. The change in shape, size, surface properties, hydrophobicity, and crystallinity of materials accounted for the altered INE. The increase in shape, size, and hydrophobicity of the sample generally reduces the INE, whereas an increase in crystallinity enhances the INE of the sample under our experimental conditions. The results suggest that environmentally relevant concentrations slightly alter INE, indicating their role as catalysts in environmental matrices. The outcome of studies on the ice nucleation properties of these food-containing aerosols might help in the physicochemical understanding of other biomolecule-induced ice nucleation, which is still an underdeveloped research area.

Study on Oscillatory and Undulatory Motion of Robotic Fish

This paper conducts a comprehensive analysis of undulating and oscillatory movements in fish, utilizing numerical simulations to explore correlations among fin thrust and swimming speed. The study distinguishes itself through a unique approach by employing kinematic equations of motion control, specifically in oscillation and undulation, for computational fluid dynamics. Despite increasing energy loss with undulation, the study reveals a reduction in power demand with oscillation, underscoring its effectiveness in achieving desired speeds. The dynamics of undulating fins in aquatic and aerial locomotion remain insufficiently understood. The trade-off between more energy-consuming but highly propulsive movements or simpler and faster movements requires sophisticated design techniques to reduce volume. The geometry, developed using Rhino 6 software, incorporates precise fluid resistance calculations conducted with Ansys Fluent 19. Spanning flow velocities from 1 to 4 m/s were used for the simulation condition. Critical factors such as flexibility, viscosity, and shape change were meticulously examined for their impact on efficiency enhancement.

Novel Tetragonal Boron Pnictides BX (X = N, P, As, Sb, Bi) with Square B2X2 Motifs from Crystal Chemistry and First Principles

Novel tetragonal (P42/mnm) boron pnictides BX (X = N, P, As, Sb, Bi) with chromium boride (crb) topology exhibiting a square B2X2 motif with resulting edge- and corner-sharing tetrahedra were predicted from crystal chemistry and extensively characterized by density functional theory (DFT) calculations. All new BX phases were found to be cohesive with decreasing cohesive energy along the series. Mechanically stable with positive sets of elastic constants, all crb phases exhibit slightly lower hardness than other BX polymorphs due to increased openness of the crystal structures. All-positive phonon frequencies characterize the crb BX family except for X = Bi, which shows a slight acoustic instability; also, the shape of the phonon spectra changes from band-like for X = N, P, As to flat bands for the heavier elements. The electronic band structures reveal insulating to semiconducting properties for crb BX, depending on the pnictogen nature along the series.

Ultrasoft platelet-like particles stop bleeding in rodent and porcine models of trauma.

Uncontrolled bleeding after trauma represents a substantial clinical problem. The current standard of care to treat bleeding after trauma is transfusion of blood products including platelets; however, donated platelets have a short shelf life, are in limited supply, and carry immunogenicity and contamination risks. Consequently, there is a critical need to develop hemostatic platelet alternatives. To this end, we developed synthetic platelet-like particles (PLPs), formulated by functionalizing highly deformable microgel particles composed of ultralow cross-linked poly (N-isopropylacrylamide) with fibrin-binding ligands. The fibrin-binding ligand was designed to target to wound sites, and the cross-linking of fibrin polymers was designed to enhance clot formation. The ultralow cross-linking of the microgels allows the particles to undergo large shape changes that mimic platelet shape change after activation; when coupled to fibrin-binding ligands, this shape change facilitates clot retraction, which in turn can enhance clot stability and contribute to healing. Given these features, we hypothesized that synthetic PLPs could enhance clotting in trauma models and promote healing after clotting. We first assessed PLP activity in vitro and found that PLPs selectively bound fibrin and enhanced clot formation. In murine and porcine models of traumatic injury, PLPs reduced bleeding and facilitated healing of injured tissue in both prophylactic and immediate treatment settings. We determined through biodistribution experiments that PLPs were renally cleared, possibly enabled by ultrasoft particle properties. The performance of synthetic PLPs in the preclinical studies shown here supports future translational investigation of these hemostatic therapeutics in a trauma setting.

An Evaluation of Renal Sinus Fat Accumulation Using the Anteroposterior Diameter of the Renal Sinus on a Computed Tomography Axial Image.

Backgrounds and objectives Renal sinus fat (RSF) is an indicator of obesity-related complications. However, the measurement and imaging process are complicated. For a simple measurement of RSF, we focused on the kidney's shape change caused by RSF accumulation. Thus, this study aimed to investigate whether the anteroposterior diameter of the renal sinus (APDRS) on a computed tomography (CT) axial image is useful for evaluating RSF accumulation. Materials and methods The correlation between APDRS and RSF was investigated in 98 outpatients who underwent abdominal CT. In addition, the correlation between APDRS or RSF and obesity indicators (estimated glomerular filtration rate from serum creatinine levels (eGFRcreat), body mass index (BMI), and visceral adipose tissue (VAT)) was also investigated. We classified patients based on the presence or absence of at least one underlying disease (chronic kidney disease (CKD), cardiovascular diseases (CVD), hypertension, and type 2 diabetes (T2D)) and investigated significant differences between the two groups at APDRS and RSF. The intraclass correlation coefficient (ICC) was also calculated for APDRS. Results There was a strong positive correlation between RSF and APDRS (r = 0.802, P < 0.01). The obesity indicators (eGFRcreat, BMI, and VAT) were correlated with RSF and APDRS (P < 0.01). Out of 98 outpatients, 48 had at least one underlying disease. There were statistically significant differences in APDRS and RSF between the patients with and without at least one of the underlying diseases caused by obesity (P < 0.01). The inter-reader ICC for the measurement of the APDRS was 0.98. Conclusions APDRS on a CT axial image may be useful for the evaluation of RSF accumulation.

Volumizing Threads (Jamber) in the Midface and Controlling Side Effects: Clinical Cases

The clinical application of Polydioxanone (PDO) threads, conventionally associated with tissue lifting, for volumizing effects in midface rejuvenation. The novel approach involves utilizing PDO volumizing threads to achieve physical augmentation, serving as a "solid filler." The study introduces a more convenient insertion method for PDO volumizing threads, emphasizing ease and efficiency. Clinical cases showcase the effectiveness of volumizing threads in addressing midface concerns, including nasolabial folds and midcheek grooves. The integration of volumizing threads for sagging area support, is explored for natural-looking enhancements. While emphasizing positive outcomes, potential side effects like thread protrusion are discussed, along with solutions for their mitigation. The volumizing thread is presented as a satisfactory procedure for patients averse to fillers or seeking subtle enhancements, with the recommendation of combining it with cog threads for those desiring distinct changes in facial shape. Overall, volumizing thread offers a minimal side-effect alternative for midface rejuvenation.

Image-based biomarkers for engineering neuroblastoma patient-specific computational models

AbstractChildhood cancer is a devastating disease that requires continued research and improved treatment options to increase survival rates and quality of life for those affected. The response to cancer treatment can vary significantly among patients, highlighting the need for a deeper understanding of the underlying mechanisms involved in tumour growth and recovery to improve diagnostic and treatment strategies. Patient-specific models have emerged as a promising alternative to tackle the challenges in tumour mechanics through individualised simulation. In this study, we present a methodology to develop subject-specific tumour models, which incorporate the initial distribution of cell density, tumour vasculature, and tumour geometry obtained from clinical MRI imaging data. Tumour mechanics is simulated through the Finite Element method, coupling the dynamics of tumour growth and remodelling and the mechano-transport of oxygen and chemotherapy. These models enable a new application of tumour mechanics, namely predicting changes in tumour size and shape resulting from chemotherapeutic interventions for individual patients. Although the specific context of application in this work is neuroblastoma, the proposed methodologies can be extended to other solid tumours. Given the difficulty for treating paediatric solid tumours like neuroblastoma, this work includes two patients with different prognosis, who received chemotherapy treatment. The results obtained from the simulation are compared with the actual tumour size and shape from patients. Overall, the simulations provided clinically useful information to evaluate the effectiveness of the chemotherapy treatment in each case. These results suggest that the biomechanical model could be a valuable tool for personalised medicine in solid tumours.

Fabrication of Porous Sintered Body using Shape-Controled 316l Stainless Steel Powder by High-Energy Ball Milling

In this study, 316L stainless steel powder was used to produce a porous body that could be used in a specific environment. In contrast to the existing method of producing filters using only spherical powders, we attempted to produce filters using plate- and needle-like powders and evaluated their performance. In the powder preparation step, the shape change of the powder was analyzed by changing the size of the stainless-steel balls used for ball milling. Then, the variations in properties of the sintered porous body caused by the ball size were investigated. As the average ball size decreased, the average particle size of the powder decreased. Moreover, the surface area and pore size of the porous body decreased. Additionally, when balls of different sizes were mixed, the porous body showed a mixture of coarse and fine pores.

Evaluation of Suitability of High-Speed Drag Finishing Machine Prototype Utilization for Workpiece Modification

The purpose of the experimental results evaluated in this paper is to verify the viability of using a prototype drag finishing machine for the modification of machined workpieces. The workpieces used in the experiments had a cylindrical shape and were manufactured by turning. Three different workpiece materials were tested, and three workpieces for each material were machined with different cutting parameters. Multiple aspects of the drag-finishing process influence were kept track of—surface roughness, dimensional accuracy, and edge burr shape change. The parameters of the drag finishing were kept constant for all workpieces, and the development of each aforementioned observed aspect was recorded. The workpieces were periodically removed from the process and measured using a coordinate measuring machine with a touch probe, a surface roughness measuring machine, and an optical microscope. Based on the gathered data, it can be concluded that the usage of a prototype drag finishing machine designed primarily for cemented carbide tool microgeometry modification is viable for workpiece finishing as well. The parameters of the drag-finishing process need to be adjusted depending on the workpiece material and initial surface roughness. Additionally, the medium used for the drag finishing should be considered with respect to the desired output quality of the workpiece. Experimental work shows that having one multi-purpose machine for precise modification of wide range of materials and shapes can be an effective approach from the standpoint of economy and productivity when it comes to small numbers of workpieces requiring surface finishing.

The smart apple-based foil: The role of pectin-glycerol-lipid interactions on thermoresponsive mechanism

In this article, fully biodegradable films based on high methylated (HM) apple pectin, glycerol, and margarine were made. The influence of different crosslinking agents on the structure and functional properties of the obtained films was investigated. Fourier-transform infrared spectroscopy (FTIR), thermogravimetry (TG), differential scanning calorimetry (DSC), small-angle X-ray scattering (SAXS) and polarized light microscopy (POM) analyses showed the key importance of the crosslinking agent on the chemical interactions between the individual components of system. A series of phase transitions related to the melting of lipid fractions have been observed, which occur in a cascade with increasing temperature. Thermomechanical analysis (TMA) indicated that the obtained samples show a rapid change in dimensions as a function of temperature. Measurements of the impedance spectroscopy demonstrated that foil’s electrical parameters change as a function of temperature. Both shape and conductivity changes are related to processes occurring in the pectin-glycerol-lipid system. It was found that the pectin glass transition, lower critical solution temperature (LCST) and lipid melting had the most pronounced effect on the operational properties. Taking into account the obtained results, the developed apple foils may have potential applications as thermosensitive smart materials for example in active packaging as sensing materials.

Dehydration-induced corrugated folding in Rhapis excelsa plant leaves

Plant leaves, whose remarkable ability for morphogenesis results in a wide range of petal and leaf shapes in response to environmental cues, have inspired scientific studies as well as the development of engineering structures and devices. Although some typical shape changes in plants and the driving force for such shape evolution have been extensively studied, there remain many poorly understood mechanisms, characteristics, and principles associated with the vast array of shape formation of plant leaves in nature. Here, we present a comprehensive study that combines experiment, theory, and numerical simulations of one such topic-the mechanics and mechanisms of corrugated leaf folding induced by differential shrinking in Rhapis excelsa. Through systematic measurements of the dehydration process in sectioned leaves, we identify a linear correlation between change in the leaf-folding angle and water loss. Building on experimental findings, we develop a generalized model that provides a scaling relationship for water loss in sectioned leaves. Furthermore, our study reveals that corrugated folding induced by dehydration in R. excelsa leaves is achieved by the deformation of a structural architecture-the "hinge" cells. Utilizing such connections among structure, morphology, environmental stimuli, and mechanics, we fabricate several biomimetic machines, including a humidity sensor and morphing devices capable of folding in response to dehydration. The mechanisms of corrugated folding in R. excelsa identified in this work provide a general understanding of the interactions between plant leaves and water. The actuation mechanisms identified in this study also provide insights into the rational design of soft machines.

Development and investigation of salt based composite phase change material containing diatomite as skeleton substance by cold sintering technology for medium and high temperature thermal energy storage

This work concerns the development of a nitrate salt based form-stable composite phase change material by cold sintering technology with the employment of diatomite as skeleton substance. Such fabrication strategy has never before been reported in the literature and we demonstrate for the first time the feasibility of salt-diatomite composite production through a cold sintering process by means of sodium hydroxide solution as sintering additive. The microstructural characteristics and development mechanism, chemical and physical compatibility, mechanical strength, phase change behaviour, thermal and shape stability of the composite are investigated to reveal the structure formation and densification mechanism of salt and diatomite. The results show that the composite could be sintered at a temperature of 180 °C, far lower than that required in the traditional hot sintering approach. Due to the congruent solubility of the salt and diatomite in aqueous alkali, a rigid and dense structure induced by a so-called dissolution-precipitation process could be generated in the composite, which provides solution to accommodate the salt, endowing the composite with splendid capacity to maintain the structure stability and restrain the liquid leakage over the phase change process. An excellent chemical and physical compatibility has been achieved between the salt and other components, and over 60 wt% salt could be encapsulated in the composite by which a melting temperature around 278 °C and an energy storage density over 650 kJ/kg at a temperature range of 50–600 °C are attained. The results also reveal that the composite exhibits preeminent mechanical strength and excellent thermal cycling performance. For a given cycling temperature range of 50–500 °C, a stable macroscopic shape with a compressive strength over 210 MPa could be achieved in the composite even after 100 times of thermal cycles.