Evaluation of Suitability of High-Speed Drag Finishing Machine Prototype Utilization for Workpiece Modification

Abstract

The purpose of the experimental results evaluated in this paper is to verify the viability of using a prototype drag finishing machine for the modification of machined workpieces. The workpieces used in the experiments had a cylindrical shape and were manufactured by turning. Three different workpiece materials were tested, and three workpieces for each material were machined with different cutting parameters. Multiple aspects of the drag-finishing process influence were kept track of—surface roughness, dimensional accuracy, and edge burr shape change. The parameters of the drag finishing were kept constant for all workpieces, and the development of each aforementioned observed aspect was recorded. The workpieces were periodically removed from the process and measured using a coordinate measuring machine with a touch probe, a surface roughness measuring machine, and an optical microscope. Based on the gathered data, it can be concluded that the usage of a prototype drag finishing machine designed primarily for cemented carbide tool microgeometry modification is viable for workpiece finishing as well. The parameters of the drag-finishing process need to be adjusted depending on the workpiece material and initial surface roughness. Additionally, the medium used for the drag finishing should be considered with respect to the desired output quality of the workpiece. Experimental work shows that having one multi-purpose machine for precise modification of wide range of materials and shapes can be an effective approach from the standpoint of economy and productivity when it comes to small numbers of workpieces requiring surface finishing.