Calibration Range Research Articles

Enhanced Detection of Lamotrigine Through HPLC Methodology in Bioanalysis

Background: Lamotrigine, an anticonvulsant drug, requires sensitive detection methods in biological and pharmaceutical matrices. Current methods struggle with interference and sensitivity, necessitating the development of improved analytical techniques. Objective: This study aims to develop and validate a highly sensitive HPLC method enhanced by salicylaldehyde derivatization for detecting lamotrigine in pharmaceutical and biological samples, and to differentiate it from Piracetam when co-administered. Methods: A reverse-phase HPLC method was employed, utilizing salicylaldehyde as a derivatizing agent to induce a bathochromic shift in lamotrigine from 315 nm to 415 nm. Optimization of the derivatization reaction included adjustments of pH, reagent concentration, temperature, and time. The standard addition method was applied to evaluate the recovery rates from spiked samples. Results: The optimized method demonstrated a linear calibration range of 1-5 µg/ml with a determination coefficient (R²) of 0.998. Recovery of lamotrigine from pharmaceutical preparations averaged 96.5%, while recovery from deprotonated serum and urine samples of healthy volunteers was 96% with a relative standard deviation (RSD) of 6%. Conclusion: The developed method offers a robust and highly sensitive approach to detect and distinguish lamotrigine in the presence of Piracetam, proving effective for both pharmaceutical and biological sample analysis.

Simulation and test for the micro-newton electromagnetic calibration force measurement

For micro-Newton (μN) level thrust measurement, achieving highly accurate calibration forces is crucial as an initial step. To provide high-precision and wide-range electromagnetic calibration forces, this study introduces a C-type magnetic circuit structure and a rectangular coil combination method. The magnetic field distribution within the device’s characteristic region was examined using the finite element method, and the impact of the relative positions of the rectangular coil and magnet was explored. Subsequently, calibration experiments were conducted on a specially developed platform. The primary findings are as follows: The electromagnetic force calibration range is from 0.097 to 237.32 μN, with the maximum error between experimental measurement data and simulation results being 1.73%. With a coil current resolution of 10 μA, the measured resolution of the calibration force exceeds 0.1 μN. Within the characteristic region, the magnetic field distribution exhibits high uniformity, with a maximum deviation rate of only 0.7%. This research establishes a technique for micro-Newton level thrust measurement.

Development and Validation of a Sonication-Assisted Dispersive Liquid-Liquid Microextraction Procedure and an HPLC-PDA Method for Quantitative Determination of Zolpidem in Human Plasma and Its Application to Forensic Samples.

The use of z-drugs has increased worldwide since its introduction. Although the prescribing patterns of hypnotics differ among countries, zolpidem is the most widely used z-drug in the world. Zolpidem may be involved in poisoning and deaths. A simple and fast HPLC-PDA method was developed and validated. Zolpidem and the internal standard chloramphenicol were extracted from plasma using a sonication-assisted dispersive liquid-liquid microextraction procedure. The method was validated including selectivity, linearity, precision, accuracy, and recovery. The calibration range (0.15-0.6 µg/mL) covers therapeutic and toxic levels of zolpidem in plasma. The limit of quantification was set at 0.15 µg/mL. Intra- and interday accuracy and precision values were lower than 15% at the concentration levels studied. Excellent recovery results were obtained for all concentrations. The proposed method was successfully applied to ten real postmortem plasma samples. In our series, multiple substances (alcohol and/or other drugs) were detected in most cases of death involving zolpidem. Our analytical method is suitable for routine toxicological analysis.

Dosimetry with the TruView gel on a 0.35 T MR-Linac: A feasibility study

The purpose of this work is to assess the feasibility of performing dosimetry with the TruView (ModusQA, London, Ontario, Canada) MTB Fricke gel by MRI reading on a low field MR-Linac (0.35 T). Radiochromic TruView gels were manufactured at IRSN. A 4 echoes time (TE) single-shot fast spin echo sequence (HASTE) was used for 2D images acquisitions. Raw MRI images were denoised (MP-PCA) and transversal relaxation rates (R2) maps were extracted using a homemade Matlab routine. Temperature influences on R2 as well as gel homogeneity were investigated. A dosimetric evaluation of the TruView gel was conducted implying four gels made from the same batch, with three of them dedicated to calibration, and the fourth one received a simple dosimetric plan. Results showed the TruView gel to be sensitive to temperature drift. A protocol was thus developed to ensure thermal stability with the use of a dedicated temperature-controlled water bath. An inhomogeneity that manifests as a R2 increase near the air/gel interface was found to cause a 4% amplitude deviation in R2 along unirradiated gels. Air sealing drastically reduced the inhomogeneity. Dose versus R2 calibration was established. TruView gel sensitivity was found to be low (0.0093 Gy−1 s−1). 1D and 2D comparison to planned dose distribution displayed overall agreement with global gamma index (5%/3 mm) evaluation with an 87 % passing rate. Main discrepancies in the low and gradient dose regions were attributable to the calibration range and diffusion effects. This study demonstrated the feasibility of using the TruView gel for dosimetric evaluation on a low field MR-Linac. The protocol developed needs to be extended to a full 3D evaluation to enable patient QA and may require modifications to the gel formulation to increase its overall sensitivity and ensure limited dependence on temperature drift.

Development of nanobiosensor for therapeutic drug monitoring in personalized cancer treatment approach

Docetaxel is one of the most effective and safe chemotherapy drugs according to the World Health Organization, but its clinical use has been discontinued due to its various side effects. To reduce these side effects, the amount of docetaxel drug should be kept at the most effective level, it should be monitored in body fluids. Due to the limitations of traditional analytical methods used for this purpose, such as expensive and low sensitivity, labor-intensive and time-consuming complex preliminary preparation, efficient methods are required for the determination of the docetaxel level in the body. The increasing demand for the development of personalized therapy has recently spurred significant research into biosensors for the detection of drugs and other chemical compounds. In this study, an electrochemical-based portable nanobiosensor system was developed for the rapid, low-cost, and sensitive determination of docetaxel. In this context, mg-p(HEMA)-IMEO nanoparticles to be used as nanobiosensor bioactive layer was synthesized, characterized, and docetaxel determination conditions were optimized. According to the results obtained, the developed nanobiosensor system can detect docetaxel with a sensitivity of 2.22 mg/mL in a wide calibration range of 0.25-10 mg/mL, in only 15 min, in mixed media such as commercially available artificial blood serum and urine. determined. We concluded that the developed nanobiosensor system can be successfully used in routine drug monitoring as a low-cost biomedical device capable of direct, rapid, and specific drug determination within the scope of personalized treatment, providing point-of-care testing.

Cyclic modelling of T-joints with CHS chord members and passing-through plates

This paper focuses on modelling the cyclic response of welded T-joints between Circular-Hollow-Section (CHS) chords and passing-through plates. Recent works have highlighted that, in practical applications, this specific joint typology can be regarded either as a standalone connection or as a component representing one of the main sources of deformability and energy dissipation capacity in more complex beam-to-column joints with CHS columns and passing-through I-beams. Currently, research efforts have primarily focused on predicting the strength and stiffness of this type of connection. However, there is a knowledge gap regarding the characterization of the cyclic response of joints with passing-through members, a crucial aspect for modelling steel structures with these connection types in seismic areas.In light of this, the paper aims to characterize the cyclic response of T-joints with CHS members and passing-through plates using a comprehensive approach that incorporates experimental, numerical, and analytical methods. Initially, the results of an experimental study examining the cyclic behaviour of T-joint specimens with passing-through plates are presented. Subsequently, models of the tested joints are implemented in Finite Element software and validated against the experimental outcomes. The validated models are used to conduct a parametric study, considering 44 different configurations to obtain their force-displacement cyclic responses. These responses are mathematically modelled using the hysteretic uniaxial material from the OpenSees library and a Genetic Algorithm based tool previously developed by the authors (MultiCal). Finally, regression analyses are performed to develop formulations for predicting the mathematical parameters of the hysteretic uniaxial material model starting directly from the geometrical and mechanical properties of the connection.This approach enables designers to model the cyclic response in structural analysis with a straightforward approach, without the need for new calibrations or tests, if the modelled joints fall within the proposed range of calibration. From the point of view of the component modelling, the approach presented aligns with the larger research strand devoted to the extension of the component method codified in Eurocode 3 part 1.8 to cyclic loading conditions.

An ultra-selective and non-enzymatic colorimetric sensor based on imprinted polymer for ephedrine assay in urine samples

A novel non-enzymatic, rapid, and portable molecularly imprinted polymer (MIP)-based colorimetric sensor was developed for ephedrine (EPD) assay in urine samples. The EPD-imprinted polymer was provided via the precipitation polymerization method and applied to fabricate an EPD colorimetric sensor utilizing the carbon disulfide and Cu2+ reagents. The calibration curve for different concentrations of EPD was obtained using the captured images on a cell smartphone and associated RGB data. Some effective parameters including pH of the EPD extraction, time of data collection after adding the reagents, and reagents sequence were investigated and optimized. The selectivity of the sensor was studied using different similar structural compounds, which proved the favorable capability of this method for the selective determination of EPD. This sensor platform with a relatively wide linear calibration range (1–100 μM), and the detection limit of 0.6 μM represents the efficient, reliable, and easy approach for EPD assay in urine samples.

Autocalibration based on dilution of a single concentrated standard is used for the determination of silicate in sea water by the modified molybdenum blue method

The silicate (Si) molybdenum blue method was modified by combining oxalate and ascorbic acid into a single reagent and was used for determining Si in sea water samples. The first step of this automated assay protocol was designed to perform either a calibration by a single Si standard prepared in deionized (DI) water, or to dilute samples in the range of 0–160 μM Si to fit into 0–20 μM Si calibration range using a 20 cm flow cell. By designing the assay protocol to function in batch mode, the influence of salinity on calibration was eliminated, thus making the method suitable for analysis of samples collected in the open ocean, coastal areas, or rivers. Reproducibility and accuracy of this method were evaluated by analysis of certified sea water reference materials. Phosphate (P) does not interfere significantly if the Si:P ratio is 4:1 or larger. The limit of detection was 514 nM Si, r.s.d. 2.1 %, sampling frequency 40 s/h, reagent consumption 700 μL/sample, and using deionized water as the carrier solution.

Development of a quantification method for arginase inhibitors by LC-MS/MS with benzoyl chloride derivatization

Arginase is an enzyme responsible for converting arginine, a semi-essential amino acid, to ornithine and urea. Arginine depletion suppresses immunity via multiple mechanisms including inhibition of T-cell and NK cell proliferation and activity. Arginase inhibition is therefore an attractive mechanism to potentially reverse immune suppression and thus has been explored as a therapy for oncology and respiratory indications. Small molecules targeting arginase present significant bioanalytical challenges for in vitro and in vivo characterization as inhibitors of arginase are typically hydrophilic in nature. The resulting low or negative LogD characteristics are incompatible with common analytical methods such as RP-ESI-MS/MS. Accordingly, a sensitive, high-throughput bioanalytical method was developed by incorporating benzoyl chloride derivatization to increase the hydrophobic characteristics of these polar analytes. Samples were separated by reversed phase chromatography on a Waters XBridge BEH C18 3.5 μm, 30 × 3 mm column using gradient elution. The mass spec was operated in positive mode using electrospray ionization. The m/z 434.1→176.1, 439.4→181.2, 334.9→150.0 and 339.9→150.0 for AZD0011, AZD0011 IS, AZD0011-PL and AZD0011-PL IS respectively were used for quantitation. The linear calibration range of the assay was 1.00–10,000 ng/mL with QC values of 5, 50 and 500 ng/mL. The qualified method presented herein exhibits a novel, robust analytical performance and was successfully applied to evaluate the in vivo ADME properties of boronic acid-based arginase inhibitor prodrug AZD0011 and its active payload AZD0011-PL.

Temperature-Wise Calibration Increases the Accuracy of DNA Methylation Levels Determined by High-Resolution Melting (HRM).

High-resolution melting (HRM) is a cost-efficient tool for targeted DNA methylation analysis. HRM yields the average methylation status across all CpGs in PCR products. Moreover, it provides information on the methylation pattern, e.g., the occurrence of monoallelic methylation. HRM assays have to be calibrated by analyzing DNA methylation standards of known methylation status and mixtures thereof. In general, DNA methylation levels determined by the classical calibration approach, including the whole temperature range in between normalization intervals, are in good agreement with the mean of the DNA methylation status of individual CpGs determined by pyrosequencing (PSQ), the gold standard of targeted DNA methylation analysis. However, the classical calibration approach leads to highly inaccurate results for samples with heterogeneous DNA methylation since they result in more complex melt curves, differing in their shape compared to those of DNA standards and mixtures thereof. Here, we present a novel calibration approach, i.e., temperature-wise calibration. By temperature-wise calibration, methylation profiles over temperature are obtained, which help in finding the optimal calibration range and thus increase the accuracy of HRM data, particularly for heterogeneous DNA methylation. For explaining the principle and demonstrating the potential of the novel calibration approach, we selected the promoter and two enhancers of MGMT, a gene encoding the repair protein MGMT.

RP-HPLC-CAD method for the rapid analysis of lipids used in lipid nanoparticles derived from dual centrifugation

The use of lipids as suitable excipients for drug carrier systems has been established for years. Liposomes or lipid nanoparticles (LNPs) in general have been shown capable of delivering both hydrophilic and hydrophobic drugs. The Covid-19 pandemic and the resulting vaccines have significantly increased interest in the potential for these lipid-based systems, which can carry different types of therapeutic RNAs. LNPs used for the transfection of RNA are usually a multi-component mixture of phospholipids and other lipids. Essential components are positively charged or ionizable lipids such as DOTAP or SM-102, but also uncharged helper lipids such as cholesterol, DOPE, DSPC, DMG-PEG2000 or DSPE-PEG2000. Due to the differences in charge, simultaneous detection is a challenge. Here, we present a reversed-phase high-performance liquid chromatography charged-aerosol-detector method (RP-HPLC-CAD method) using a C-18 column for the simultaneous determination of charged and uncharged lipids. Our method has been validated according to the ICH-Q2 (R2) guideline for accuracy, precision, specificity and working range, including the limit of detection (LOD) and quantification (LOQ), as well as the calibration range. We were able to show satisfactory results in both precision and accuracy. The working range also shows great potential with a calibration range from 9.375 to 1000 μg/ml, LODs <1.85 μg/ml and LOQs <6.16 μg/ml. This method represents a fast and reproducible procedure for quantifying the lipids mentioned. In combination with the novel approach for the production of LNPs using dual centrifugation (DC), it offers the possibility of extremely rapid production of RNA-loaded LNPs, and the immediate analysis for their lipid components.

Using L-cysteine to enhance calibration range and prevent a memory effect in mercury analysis of complex samples via ICP-OES

BackgroundMercury (Hg) is a persistent pollutant occurring in the environment able to transition between different species. It can therefore be found in air, soil and water reservoirs becoming a present concern for the general population but also sensitive populations like pregnant women. Therefore, investigating organ-specific transfer mechanisms of Hg is mandatory for Hg toxicity testing. For this, an in vitro system using microporous inserts to monitor the transfer across an in vitro placental barrier has been used. However, due to the cytotoxicity of Hg only low concentrations (1.26 ×10−4 – 1.36 ×10−2 µg/µL Hg) can be applied, making Hg determination in cell culture medium using inductively coupled plasma-optical emission spectrometry challenging, especially when these trace amounts should be determined alongside other trace elements which are naturally occurring in cells and cell culture medium like the essential metals manganese (Mn), iron (Fe), copper (Cu), and zinc (Zn). Additionally, Hg analysis on an ICP system holds also a number of challenges like a persistent memory effect and instability of Hg standard solutions. MethodsThe development of a rapid and sensitive ICP-OES method to determine Hg in different matrices like cell culture medium and cells has been performed on an Avio 220 Max ICP-OES (Perkin-Elmer) equipped with a cyclonic spray chamber and MicroMist® nebulizer. Cell lysates and cell culture medium were diluted in a mixture of 0.2 % L-cysteine, 2 % HNO3 and 0.1 % HCl and directly introduced into the ICP-OES system. Further method development included the suitability of the analysis of multiple elements like Mn, Fe, Cu, and Zn as well as the determination of the limit of detection and limit of quantification. ResultsThe combination of 0.2 % L-cysteine, 2 % HNO3 and 0.1 % HCl is able to bind and stabilize Hg ions in standard solutions and in biological matrices over a wide dynamic concentration range (1 – 500 µg/L) also alongside other metals like Mn, Fe, Cu and Zn without losses of sensitivity. A short run time of 3 min enables high throughput analysis. Additionally, the high salt and carbon concentrations in the culture medium do not affect Hg sensitivity using the ICP-OES. ConclusionThis method is a useful tool for the quantification of Hg in a variety of complex matrices including cells and cell culture media (high salt and carbon-rich (∼1 % each)) with high sensitivity and minimal sample preparation allowing high throughput. Furthermore, not only Hg can be determined in biological matrices, but even multiple elemental analysis can be carried out to address the effect of Hg on other metals homeostasis.

Validation of an enzyme-linked immunosorbent assay test-system for bevacizumab concentration determing in biological fluids

Introduction. One of the reasons for the development of many diseases primarily malignant is the increased expression of Vascular Endothelial Growth Factor (VEGF). Bevacizumab is a drug that neutralizes the biological activity of VEGF. The molecular structure of bevacizumab is a recombinant humanized antibody. Its use reduces vascularization in the foci of increased VEGF expression which slows down tumor growth and also helps restore vision in a number of ophthalmic diseases. To determine the concentration of bevacizumab in human biological fluids a test system based on Enzyme-linked Immunosorbent Assay (ELISA) is presented.Aim. Aim of this study is the validation of this test system.Materials and methods. Blank sera of volunteers, bevacizumab solution, enzyme-linked immunosorbent assay, solid-phase sandwich ELISA kit, microplate photometer.Results and discussion. The following characteristics of the test system were determined: the lower limit of quantification is 2.0 mcg/ml, the upper calibration range is up to 200 mcg/ml, the accuracy and precision within one series and between series does not exceed 20 %, and the total error of the method – 30 %, short-term stability for samples at room temperature – 6 hours, long-term stability – 14 days at –20 °C, the ability to freeze/thaw of samples is up to three times, the ability to determine samples with a concentration above the upper calibrator after diluting in 2 times.Conclusion. The results obtained fully comply with international acceptance criteria and allow the use of the ELISA test system manufactured by LLC "Probiotek" for use in the field of clinical laboratory diagnostics.

Utilization of a High-Pressure Vibrating Tube Densimeter for Liquids at Temperatures Down to 100 K

A high-pressure vibrating tube densimeter, specified by the manufacturer for temperatures from (263 to 473) K at pressures up to 140 MPa, was tested at temperatures down to 100 K and from vacuum to pressures up to 10 MPa. To verify the functionality and overall performance under these conditions, the densimeter was calibrated with measurements under vacuum as well as methane and propane as reference fluids. The calibration range is T = (120 to 200) K at pressures from (2.0 to 10.0) MPa. To evaluate the recorded data, two established calibration models were used to describe the dependence of the densimeter's oscillation period on the investigated reference fluids' temperature, pressure, and density. The experiments showed that the vibrating tube densimeter is operational even at temperatures down to 100 K, but exhibits a shift of its vacuum resonance when subjected to thermal cycling at temperatures below 180 K. Accordingly, the calibration models were modified with respect to how the vacuum resonance is considered. Then, the determined calibration parameters reproduce the densities of the reference fluids within ± 0.10 kg·m−3 for the calibration model that performed better for the present study. Measurements on pure ethane and argon validate the calibration of the densimeter. Here, the densities are within (− 0.47 to 0.16) kg·m−3 of values calculated with the respective reference equation of state. The estimated combined expanded uncertainty (k = 2) in density for the validation measurements ranges from (0.52 to 1.13) kg·m−3 or is less than 0.1 % for liquid densities.

Quantitative determination of R/S-methadone in human serum using ultra-high performance supercritical fluid chromatography-tandem mass spectrometry: A method for routine use.

Methadone has two enantiomers, which exhibit differences in pharmacological effects, with R-methadone being the active and S-methadone the inactive enantiomer. A robust, simple and rapid method for chiral separation of the two enantiomers in serum samples using ultra-high performance supercritical fluid chromatography-tandem mass spectrometry (UHPSFC-MSMS) has been developed and validated. Enantiomeric separation was achieved using a Chiralpak IH-3 column with a mobile phase consisting of CO2 and 30mM ammonium acetate in methanol/water (98/2, v/v). Runtime was 4minutes. Sample preparation was semi-automated using a Hamilton ML Star robot with protein precipitation, and phospholipid removal was carried out using a Waters OSTRO™ 96-well plate. The calibration range was 50.0-1,500 nM for each enantiomer. The between-assay relative standard deviations were in the range of 1.2-3.6%. Matrix effects ranged from 99% to 115% corrected with internal standard. The method has been implemented in our laboratory and has proven to be a robust and reliable method for determining the ratio of R/S-methadone in authentic patient samples.

Derivatization-free determination of chiral plasma pharmacokinetics of MDMA and its enantiomers

3,4-Methylenedioxymethamphetamine (MDMA) is an entactogen with therapeutic potential. The two enantiomers of MDMA differ regarding their pharmacokinetics and pharmacodynamics but the chiral pharmacology of MDMA needs further study in clinical trials. Here, an achiral and an enantioselective high performance liquid chromatography–tandem mass spectrometry method for the quantification of MDMA and its psychoactive phase I metabolite 3,4-methylenedioxyamphetamine (MDA) in human plasma were developed and validated. The analytes were detected by positive electrospray ionization followed by multiple reaction monitoring. The calibration range was 0.5–500 ng/mL for the achiral analysis of both analytes, 0.5–1,000 ng/mL for chiral MDMA analysis, and 1–1,000 ng/mL for chiral MDA analysis. Accuracy, precision, selectivity, and sensitivity of both bioanalytical methods were in accordance with regulatory guidelines. Furthermore, accuracy and precision of the enantioselective method were maintained when racemic calibrations were used to measure quality control samples containing only one of the enantiomers. Likewise, enantiomeric calibrations could be used to reliably quantify enantiomers in racemic samples. The achiral and enantioselective methods were employed to assess pharmacokinetic parameters in clinical study participants treated with racemic MDMA or one of its enantiomers. The pharmacokinetic parameters assessed with both bioanalytical methods were comparable. In conclusion, the enantioselective method is useful for the simultaneous quantification of both enantiomers in subjects treated with racemic MDMA. However, as MDMA and MDA do not undergo chiral inversion, enantioselective separation is not necessary in subjects treated with only one of the enantiomers.

A rapid and sensitive LC-MS/MS method for quantifying oxycodone, noroxycodone, oxymorphone and noroxymorphone in human plasma to support pharmacokinetic drug interaction studies of oxycodone.

A sensitive and reliable LC-MS/MS method was developed and validated for the quantification of oxycodone and metabolites in human plasma. The method has a runtime of 6min and a sensitivity of 0.1μg/L for all analytes. Sample preparation consisted of protein precipitation. Separation was performed on a Kinetix biphenyl column (2.1 × 100 mm, 1.7μm), using ammonium formate 5mm in 0.1% aqueous formic acid and methanol LC-MS grade 100% in gradient elution at a flow rate of 0.4ml/min. Detection was performed in multiple reaction monitoring mode using positive electrospray ionization. The method was linear over the calibration range of 0.1-25.0μg/L for oxycodone, noroxycodone and noroxymorphone and 0.1-5.0μg/L for oxymorphone. The method demonstrated good performance in terms of intra- and interday accuracy (86.5-110.3%) and precision (CV 1.7-9.3%). The criteria for the matrix effect were met (CV < 15%) except for noroxymorphone, for which an additional method was applied to compensate for the matrix effect. Whole blood samples were stable for 4h at room temperature. Plasma samples were stable for 24 h at room temperature and 3months at -20°C. Furthermore, the method was successfully applied in a pharmacokinetic drug interaction study of oxycodone and enzalutamide in patients with prostate cancer.

Superhydrophobic eggshell for fabrication of hydrophobic barrier of paper-based analytical device for colorimetric determination of ammonium ion in water

This work demonstrates the first application of the superhydrophobic eggshell as an environmental-friendly material for fabricating the hydrophobic barrier of a paper-based analytical device (PAD). The eggshell surface was modified by mixing the pulverized chicken eggshell biowaste with stearic acid and a polystyrene binder to accomplish superhydrophobicity. The PAD (10 × 10 mm2) is comprised of the circular-shaped hydrophilic reservoir (Ø 5 mm). The liquid barrier was fabricated by painting both the topside and the underside of the filter paper with the dispersed superhydrophobic eggshell solution. The SEM images revealed that the microsized superhydrophobic eggshell particles absorbed onto the porous surface of the cellulose fibril. A coated surface with a water contact angle of 155.39° ± 1.02° (n = 10) on the paper substrate was achieved, and this indicated superhydrophobicity. The eggshell barrier enabled excellent water and chemical resistance. The fabricated PAD was applied for the colorimetric determination of ammonium cations (NH4+), based on the modified Berthelot reaction. Samples and chromogenic solutions were aliquoted onto the hydrophilic reservoir, with subsequent capture of the optical image of the stable, green-colored product by a smart phone under a light-controlled studio. The green color intensities were evaluated by ImageJ™ and plotted against the standard NH4+ concentrations. A wide linear calibration range 5.0 to 100 mg N/L was achieved with good linearity (r2 > 0.99). The PAD confirmed satisfied analytical recovery (Mean ± SD: 100.6 % ± 0.97, n = 11 samples) and high precision (RSD = 0.85 %: 10-PAD replicate measurements of 1.0 mg N/L). The limit of detection (3 SD of blank/slope) of 1.05 mg N/L was found sensitive enough to monitor the NH4+ contents in freshwater. The results, determined by the developed PAD and ion chromatography, showed no significant difference under the statistical paired t-test at 95 % confidence (tstat = -1.80, tcri = 2.57, n = 6 samples).

ATR-SEIRAS Method to Measure Interfacial pH during Electrocatalytic Nitrate Reduction on Cu

This study reports the accuracy and applications of an attenuated total reflectance–surface-enhanced infrared absorption spectroscopy (ATR–SEIRAS) technique to indirectly measure the interfacial pH of the electrolyte within 10 nm of the electrocatalyst surface. This technique can be used in situ to study aqueous electrochemical reactions with a calibration range from pH 1–13, time resolution down to 4 s, and an average 95% confidence interval of 14% that varies depending on the pH region (acidic, neutral, or basic). The method is applied here to electrochemical nitrate reduction at a copper cathode to demonstrate its capabilities, but is broadly applicable to any aqueous electrochemical reaction (such as hydrogen evolution, carbon dioxide reduction, or oxygen evolution) and the electrocatalyst may be any SEIRAS-active thin film (e.g., silver, gold, or copper). The time-resolved results show a dramatic increase in the interfacial pH from pH 2–7 in the first minute of operation during both constant current and pulsed current experiments where the bulk pH is unchanged. Attempts to control the pH polarization at the surface by altering the electrochemical operating conditions—lowering the current or increasing the pulse frequency—showed no significant change, demonstrating the challenge of controlling the interfacial pH.

Self-calibration performance analysis of sheet micro-components based on droplet array

The droplet array-based micro-component self-calibration method features simple operation, easy batch control implementation, and holds great promise in the field of micro-assembly. The paper investigates the self-calibration process, analyzes the factors influencing self-calibration performance, discusses self-calibration errors, self-calibration range, and their relationship with micro-component parameters, droplet array parameters, and fluid parameters, and proposes a construction method suitable for droplet arrays suitable for micro-components. The research results indicate that the self-calibration error and calibration range of micro-components are related to micro-component parameters, substrate array parameters, and droplet parameters. When the micro-component size is greater than or equal to the droplet array size, the self-calibration error is relatively small. Constructing an appropriate droplet array based on the size and shape of the micro-components can reduce self-calibration errors and meet the self-calibration accuracy requirements for micro-components of varying sizes and shapes.