C-chain Length Research Articles

First principles study of BN triphenylene-graphdiyne monolayer and bilayer structures with varying C-chain lengths: insights into optical behavior

First-principles calculations engaging density functional theory (DFT) are employed to systematically study the optical characteristics of monolayer and bilayer boron nitride (BN) triphenylene-graphdiyne (Tp-BNyne) structures featuring varying lengths of C-chains. The thermal stability of Tp-BNyne structures at temperatures up to 1000 K is verified. The weak van der Waals interactions due to the small binding energies and significant interlayer distances maintain the cohesion between the layers. The investigation revealed that all Tp-BNyne structures under examination exhibit semiconductor behavior with a band gap in the range of 0.97–2.74 eV. The bilayer configurations demonstrated a narrower energy band gap in comparison to the monolayer ones. Increasing the length of C-chains leads to a reduction in the energy band gap. Delving into the optical behavior of Tp-BNyne structures under photon incidence with parallel and perpendicular polarizations, a distinct anisotropy in the optical characteristics of Tp-BNyne is revealed. The static dielectric constant increases and the optical band gap decreases with increasing C-chain length. The absorption coefficients of monolayer and bilayer Tp-BNyne structures, on the order of 107/m, demonstrate that these sheets can effectively absorb light in the visible and ultraviolet regions. These findings present Tp-BNyne sheets as promising candidates for use in photovoltaic devices to convert sunlight into electrical current, as well as for designing optical devices for ultraviolet protection. Additionally, Tp-BNyne structures are transparent materials, especially in the high-energy range.

Synthesis and antimicrobial activity testing of quaternary ammonium silane compounds

With increasing health awareness of the pathogenic effects of disease-causing microorganisms, interest in and use (of medical textiles, disinfectants in medical devices, etc.) of antimicrobial substances have increased in various applications, such as medical textiles and disinfectants (alcohol-based and nonalcoholic), in medical devices There are several concerns with alcohol-based disinfectants, such as surface deformation of medical devices due to high alcohol content and damage to skin tissue caused by lipid and protein denaturation of cell membranes. Quaternary ammonium compounds (quats) were preferred because they have the potential to prepare water-based disinfectants. In this study, novel (3-chloropropyl)triethoxysilane (CPTMO) and (3-chloropropyl)triethoxysilane (CPTEO) based quaternary ammonium silane compounds (silane-quats) were developed using quats with carbon chain lengths of C12, C14, C16 and C18. Titration (ASTM D2074) was used to calculate the yield of the synthesis and the structures of the products were characterised by Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance spectroscopy (13C NMR, 1H NMR) and gas chromatography-mass spectrometry (GC–MS).The in vitro antimicrobial activity of the synthesized samples was evaluated against Gram-positive (Staphylococcus aureus (S. aureus), Enterococcus hirae (E. hirae)) and Gram-negative (Escherichia coli (E. coli), Pseudomonas aeruginosa (P. aeruginosa)) bacteria and fungi (Candida albicans (C. albicans), Aspergillus brasiliensis (A. brasiliensis)) using the minimum inhibitory concentration (MIC) test. According to MIC tests, the silane-quats with the highest antimicrobial effects were dimethylhexadecyl[3-(trimethoxysilyl)propyl]ammonium chloride (SQ3), which had an MIC of < 16 μg/ml (ppm) against E. coli, S. aureus, E. hirae, C. albicans, and A. brasiliensis and 32 μg/ml against P. aeruginosa. The MIC test results also showed antimicrobial activity at least 2 times greater than that of the commercially available disinfectant benzalkonium chloride (BAC). Findings suggest that SQ3 (C16) holds promise as an effective medical disinfectant, presenting a novel approach to combating microbial infections in healthcare settings.

Purification and characterization of lipopeptides produced by Bacillus subtilius and their antibacterial effects on Escherichia coli and Staphylococcus aureus

Lipopeptides have favorable biological activity and thus have great potential to serve as replacements. Whole genome sequencing was used in this work to pinpoint the gene clusters in Bacillus subtilis that code for secondary metabolites that have antibacterial qualities. Afterwards, the metabolic pathways responsible for the production of these compounds were clarified, and the lipopeptides were separated and identified using a combination of chromatography and spectroscopy methods, such as High-Performance Liquid Chromatography (HPLC), Fourier Transform Infrared Spectroscopy (FTIR), and Liquid Chromatography-Mass Spectrometry (LC-MS). Bacillus subtilis mainly synthesized surfactin homologs with carbon chain lengths ranging from C13 to C16 ([M+H]+: 994.6418; 1008.6586; 1022.6730; 1036.6896) and fengycin homologs with carbon chain lengths of C15 and C16 ([M+H]+: 1449.7937, 1463.8046). The isolated lipopeptides exhibited strong inhibitory effects against Escherichia coli and Staphylococcus aureus, with minimum inhibitory doses of 12.50 mg/L and 6.25 mg/L, respectively. Furthermore, lipopeptides demonstrated a dose-dependent inhibition of E. coli and S. aureus. The findings from SEM and SYTO 9/PI staining demonstrate that lipopeptides function by compromising the integrity of bacterial cell membranes. The results demonstrate the effectiveness of lipopeptides as antibacterial agents against foodborne pathogens, indicating their potential as substitutes for traditional antibiotics.

Cosolvent-assisted construction of high-performance reverse osmosis membranes with multilayer nanovoid structures: Effect of amides in aqueous phase

The cosolvent-assisted interfacial polymerization (CAIP) has garnered significant attention due to its capacity to easily and effectively modify the performance of polyamide (PA) reverse osmosis (RO) membranes. To gain deeper understanding of the mechanism of a specific type of cosolvents on the IP reaction, namely N,N-dimethylformamide (DMF), N,N-dimethylacetamide (DMAc), and N,N-dimethylpropionamide (DMPr) were used as aqueous-phase cosolvents to systematically investigate their effects on the membrane structures and properties under different conditions. Amide cosolvents in the aqueous phase facilitated the diffusion of the amine monomer and the formation of nanovoids within the PA layer as the C-chain length of amides increased. When 1,2-dichloroethane was also included in the organic phase, the extent of the two-phase miscible zone was further increased with its assistance, which contributed to generating the larger nanovoids within the layer, thicker PA layer and extensive exterior PA layers, as well as significantly enhancing the water permeability and selectivity of membranes. Importantly, this study successfully prepared high-performance RO membranes with multilayer nanovoid structures in situ by introducing cosolvents in the IP reaction with permeability up to 2.26 L·m−2·h−1·bar−1, providing theoretical and experimental bases for further enrichment of CAIP.

Cellulose pyrolysis kinetic model: Detailed description of volatile species

Lignocellulosic biomass is typically composed by a major fraction of cellulose. Its decomposition influences on large extent the biomass rate of pyrolysis and product distribution, affecting process behaviour in thermochemical conversion processes. Containing approximately 90 % of volatile matter, volatile products from cellulose pyrolysis are very important in the characteristics of flames and ignition properties. Recent developments in analytical methods allowed a detailed identification of these volatile products, giving valuable information to process development and better understanding of kinetics. Predictions of a previous kinetic model are compared with these new findings, revealing large space for improvements. In this work, we propose a multi-step kinetic model of cellulose pyrolysis, incorporating the most recent experimental findings into the detailed product description. The model consists of four main reactions for the decomposition of cellulose, with formation of gases, volatiles, char and metaplastic species. The release of metaplastic species is described by a set of six reactions. The formation and release of 13 oxygenated hydrocarbons is predicted by the model, including anhydrosugars, furans, aldehydes, alcohols, ketones and carboxylic acids. The model also describes the formation of levoglucosan in metaplastic state before its release, explaining high heating rate mass loss behaviour. The model is compared with a large variety of experiments from literature, and validated for mass loss rates and product distribution, achieving overall good agreement despite experimental uncertainties and the large simplifications characteristic of the model formulation. Besides effectively quantifying the yields of gaseous, condensable and solid products, the model accurately captures the distribution of volatiles in terms of functional groups and C-chain length.

Quantitative Pharmacokinetics Reveal Impact of Lipid Composition on Microbubble and Nanoprogeny Shell Fate.

Microbubble-enabled focused ultrasound (MB-FUS) has revolutionized nano and molecular drug delivery capabilities. Yet, the absence of longitudinal, systematic, quantitative studies of microbubble shell pharmacokinetics hinders progress within the MB-FUS field. Microbubble radiolabeling challenges contribute to this void. This barrier is overcome by developing a one-pot, purification-free copper chelation protocol able to stably radiolabel diverse porphyrin-lipid-containing Definity® analogues (pDefs) with >95% efficiency while maintaining microbubble physicochemical properties. Five tri-modal (ultrasound-, positron emission tomography (PET)-, and fluorescent-active) [64 Cu]Cu-pDefs are created with varying lipid acyl chain length and charge, representing the most prevalently studied microbubble compositions. In vitro, C16 chain length microbubbles yield 2-3x smaller nanoprogeny than C18 microbubbles post FUS. In vivo, [64 Cu]Cu-pDefs are tracked in healthy and 4T1 tumor-bearing mice±FUS over 48h qualitatively through fluorescence imaging (to characterize particle disruption) and quantitatively through PET and γ-counting. These studies reveal the impact of microbubble composition and FUS on microbubble dissolution rates, shell circulation, off-target tissue retention (predominantly the liver and spleen), and FUS enhancement of tumor delivery. These findings yield pharmacokinetic microbubble structure-activity relationships that disrupt conventional knowledge, the implications of which on MB-FUS platform design, safety, and nanomedicine delivery are discussed.

Influence of van der Waals Interactions between the Alkyl Chains of Surface Ligands on the Size and Size Distribution of Nanocrystals Prepared by the Digestive Ripening Process.

Thermal heating of polydispersed nanocrystals (NCs) with surface-active organic ligands in a solvent leads to the formation of monodispersed NCs, and this process is known as digestive ripening (DR). Here, by performing DR on Au NCs using different-chain-length amine and thiol ligands, we evidently show that ligands with C12 chain length result in the formation of NCs with narrow size distributions when compared to C8, C16, and C20 chain length ligands. Furthermore, our findings also show that in the case of alkyl thiol, the NC size remains more or less the same, while the size distribution gets altered significantly with the chain length. On the other hand, both size and size distribution are affected significantly when the alkyl amine chain length is varied. Fourier transform infrared (FTIR) studies indicate that the van der Waals (vdW) interactions are weakest when the amine with C12 carbon chain is used as the DR agent, while in the case of thiols, molecules with C8 and C12 chain lengths have nearly the same vdW interactions (with C12 slightly weaker than C8), which are weaker than those of C16 and C20. Molecular dynamics (MD) simulation results corroborate the experimental observations and suggest that due to more defects in the alkyl chain, the C8 and C12 (amine as well as thiol) ligands are disordered and less stable on Au(111) and Au(100) surfaces. This could result in efficient etching and redeposition, making the ligands with C8 and C12 chain lengths the better DR agents.

Wax Ester and Triacylglycerol Production in Acinetobacter baumannii: Role in Osmostress Protection, Reactive Oxygen Species, and Antibiotic Sensitivity.

Wax esters (WEs) are neutral lipids that are produced by many different bacteria as potential carbon and energy storage compounds. Comparatively little is known about the role of WE in pathogenic bacteria. The opportunistic pathogen Acinetobacter baumannii is a major cause of hospital-acquired infections worldwide. Salt and desiccation resistance foster A. baumannii infections such as urinary tract infections and allow for reinfection when bacteria are taken up from dry surfaces in the hospital environment. Here we report on WE and triacylglycerol (TAG) production in A. baumannii as a response to nitrogen limitation and high salt stress. Fatty acids and fatty alcohols with chain lengths of C16 and C18 were identified as the most prominent WE constituents. We identified the terminal key enzyme of WE biosynthesis, the bifunctional wax ester synthase/acylCoA:diacylglycerol acyltransferase (WS/DGAT) encoded by the wax/dgat gene, and demonstrated that transcription of wax/dgat and production of WS/DGAT are independent of the nitrogen concentration. A Δwax/dgat mutant was impaired in growth in the presence of high salt concentration and was more sensitive to imipenem and reactive oxygen species.

Unveiling the origin, fate, and remedial approaches for surfactants in sewage-fed foaming urban (Bellandur) Lake

Foam formation in surface water bodies has become a global phenomenon, but the solutions to this crisis are often insufficient. Foam formation in water bodies is attributed to surfactants and requires a comprehensive assessment of various sources of surfactants to evolve mitigation strategies. The study is focused on thoroughly analyzing surfactants in the water and foam fractions of a large waterbody in Bangalore (India) spanning around 1000 acres (400 ha), which has been foaming for two decades. Results revealed that the key surfactants originate predominantly from anthropogenic sources with a small component emerging from naturogenic sources. Anthropogenic surfactants were found to be predominant (96.5%), with linear alkylbenzene sulphonates (LAS) of various C-chain lengths 12–20 being the most prevalent. Naturogenic surfactants derived from bacterial genera Pseudomonas exhibited significant microbial diversity, accounting for over 19% of total bacterial population in both the water and organic sediments of the lake. Modelling studies and field validation efforts were carried out to understand the fate of LAS in the foaming lake. The results indicated that these surfactants donot degrade under the prevailing conditions and timeframe as wastewater traverses through the lake, and their presence was also observed in the organic sludge sediment. Modeling the underlying processes revealed that a minimum dissolved oxygen (DO) concentration of 3.5 mg/l enables the degradation of over 90% of surfactants within the residence time of 8–10 days in Lake. Additionally, the process of desludging could contribute to an additional increase to the overall efficiency of surfactant removal, simultaneously removing legacy sorbed surfactants to sediments.

Peat Formation in Rewetted Fens as Reflected by Saturated n-Alkyl Acid Concentrations and Patterns

The conversion of cultivated fen peat soils into rewetted soils can mitigate global climate change. Specifically, carbon in newly formed peat can store atmospheric CO2 for a long time in soil, but alterations in the quality of soil organic matter are not well known. To shed light on the complex processes of peat degradation or new formation under dry or rewetting conditions, we investigated and quantified saturated n-alkyl acids as an indicator compound class of peatlands response to the contrasting management practices. The concentrations of saturated n-alkyl acids from two soil layers of the drained and rewetted were determined in two soil layers of drained and rewetted fenland types such as Alder Carr forest, coastal peatland, and percolation mire. The analytical methods were solvent extraction, methylation with tetramethylammonium hydroxide, and gas chromatography/mass spectrometry. The saturated n-alkyl acid distribution pattern showed that the concentrations of long C-chain lengths were larger by factors of up to 28 relative to the short C-chain lengths. The effect of rewetting was reflected by the ratios of the summed concentrations of long (n-C21:0 to n-C34:0) to short (n-C10:0 to n-C20:0) C-chain saturated n-alkyl acids for drained and rewetted peat soil samples. These ratios were consistently lower in samples from the rewetted sites, indicating a higher input of microbial bio- and necromass to soil organic matter, likely from algae and anaerobic bacteria, under rewetting. The results suggest that the enrichment of microbial biomass and necromass in rewetted soils may be an important contributor to the formation of new peat in fenlands, irrespective of fenland type.

Optimized cutaneous delivery of anti-wrinkle dipeptide KT via molecular modification: Preformulation, permeation, and the importance of conjugate chain length

Introduction: Anti-aging peptides, such as dipeptide KT, are promising rejuvenating agents and have recently received significant attention. However, their hydrophilic nature makes skin absorption therapeutically inadequate. The excessive hydrophilicity of peptides is partially solved by lipoidal conjugates, however, the increased molecular weight due to conjugation creates a new obstacle to skin permeation. Methods: In an attempt to concurrently solve these limitations, here we have studied different short-mid chain fatty acids (C6-C18) conjugates of dipeptide KT. Different fatty acid chain lengths of C6, C8, C10, C12, C14, C16, and C18 were considered to be conjugated with KT and screened in-silico. Of those, C8, C10, and C12 were preferred and synthesized alongside two controls of the parent drug (KT) and C16 (Pal-KT) as the commercialized form to be studied mechanistically. Subsequently, they were structurally characterized and underwent preformulation, supramolecular investigations (e.g., thermal behavior, solubility, surface-acting, crystalline structure), and skin absorption studies. Results: Data showed that the synthesized conjugates substantially outperformed Pal-KT in terms of molecular weight, lipophilicity, melting point, and aqueous solubility. In addition, unlike KT, they all demonstrated amphiphilicity-related features. The maximum and minimum skin permeation were assigned to C8-KT (33.2%) and KT (0.004%). Moreover, permeability coefficients (Kp) of the C8-KT, C10-KT, C12-KT, and C16-KT were calculated to be about 22000, 3800, 3400, and 1600 times higher than KT, respectively. Conclusion: Conjugating lower molecular weight fatty acids and optimizing lipophilicity can enhance molecular properties, skin absorption, and the ability to form supramolecular structures. This, in turn, leads to the development of superior anti-wrinkle products and formulations.

Risk assessment related to the presence of benzalkonium chloride (BAC), didecyldimethyl ammonium chloride (DDAC) and chlorates in fish and fish products.

In compliance with Article 31 of Regulation (EC) No 178/2002, EFSA received a mandate from the European Commission to prepare a statement on the risk assessment related to the presence of benzalkonium chloride (mixture of alkylbenzyldimethylammonium chlorides with alkyl chain lengths of C8, C10, C12, C14, C16 and C18) (BAC), didecyldimethylammonium chloride (mixture of alkyl-quaternary ammonium salts with alkyl chain lengths of C8, C10 and C12) (DDAC) and chlorates in fish and fish products. Within EFSA's annual chemical data collection, EFSA collected monitoring data for the residues of BAC, DDAC and chlorates from EU Member States, Iceland and Norway performed a statistical evaluation, providing estimated residue values for each substance in/on fish and fish products, at the percentile appropriate for the number of the available samples. Based on the information collected, EFSA performed an acute and chronic exposure assessment for EU consumers for BAC, DDAC and chlorates at the lower-bound, medium-bound and upper-bound scenarios resulting from the consumption of fish and fish products. EFSA did not identify potential consumer health risks associated to residues of the substances found in fish and fish products.

An in-depth investigation of supercritical fluid chromatography retention mechanisms by evaluation of a series of specially designed alkylsiloxane-bonded stationary phases based on linear solvation energy relationship

Fundamental research on supercritical fluid chromatography (SFC) has gained considerable interest, with many studies focusing on its retention mechanism based on the linear solvation energy relationship (LSER) model. In this paper, a series of alkylsiloxane-bonded stationary phases were specifically designed and synthesized, then evaluated using the mobile phase composed of CO2 with 10% (v/v) methanol. The study demonstrated the close relationship between the interactions (manner and magnitude) of stationary phases and the C-chain length, bonding density and the endcapping treatment. All C8 phases provide positive e, v and negative s, whose magnitude was regularly affected by bonding density. It was worth mentioning the non-endcapped C8 phases could provide H-bonding (positive a and b) by reducing the bonding density of the alkyl chain. Once it was endcapped, the interaction manner did not vary with bonding density adjustment. The non-endcapped C4 phases with higher bonding density could establish additional dispersion interaction (positive v). It can be seen that two synthesis strategies, 1) non-endcapped, long C-chain (C8) combined with low bonding density, and 2) non-endcapped, short C-chain (C4) combined with high bonding density, can obtain the alkylsiloxane-bonded stationary phases (C8-1 and C4-3) to provide both polar and dispersion interactions, showing different separation selectivity. Furthermore, the LSER model with ionic terms was applied to evaluate partial C8 columns, and its rationality was verified. The non-endcapped C8 showed great d+ values, which originated from the silanol groups. C8SCX also possessed a great d+ value due to the benzenesulfonic acid groups. A remarkable result showed that C8SAX exhibited prominent d− and d+ values simultaneously due to the combined effect of silanol and quaternary ammonium groups, which indicates the unique selectivity when separating ionic compounds. This study provides in-depth insights into the retention mechanism of alkylsiloxane-bonded stationary phases in SFC, as well as a reference for the design of SFC stationary phases.

Per- and Poly-Fluoroalkyl Substances in Runoff and Leaching from AFFF-Contaminated Soils: a Rainfall Simulation Study.

The mobilization and transport of per- and poly-fluoroalkyl substances (PFASs) via surface runoff (runoff) from aqueous film-forming foam (AFFF)-contaminated soils during rainfall, flooding, or irrigation has not been thoroughly evaluated, and the effectiveness of carbonaceous sorbents in limiting PFASs in runoff is similarly unquantified. Here, laboratory-scale rainfall simulations evaluate PFAS losses in runoff and in leaching to groundwater (leachate) from AFFF-contaminated soils varying in texture, PFAS composition and concentration, and remediation treatment. Leaching dominated PFAS losses in soils with a concentration of ∑PFAS = 0.2-2 mg/kg. However, with higher soil PFAS concentrations (∑PFAS = 31 mg/kg), leachate volumes were negligible and runoff dominated losses. The concentration and variety of PFASs were far greater in leachates regardless of the initial concentrations in soil. Losses of PFASs were dependent on the C-chain length for leachates and more on the initial concentration in soil for runoff. Suspended materials did not meaningfully contribute to runoff losses. While concentrations of most PFASs declined significantly after the first rainfall event, desorption and transport in both runoff and leachates persisted over several rainfall events. Finally, results showed that sorption to AC mostly occurred during, not prior to, rainfall events and that 1% w/w AC substantially reduced losses in runoff and leachates from all soils.

Division of the role and physiological impact of multiple lysophosphatidic acid acyltransferase paralogs

BackgroundLysophosphatidic acid acyltransferase (LPAAT) is a phospholipid biosynthesis enzyme that introduces a particular set of fatty acids at the sn-2 position of phospholipids. Many bacteria have multiple LPAAT paralogs, and these enzymes are considered to have different fatty acid selectivities and to produce diverse phospholipids with distinct fatty acid compositions. This feature is advantageous for controlling the physicochemical properties of lipid membranes to maintain membrane integrity in response to the environment. However, it remains unclear how LPAAT paralogs are functionally differentiated and biologically significant.ResultsTo better understand the division of roles of the LPAAT paralogs, we analyzed the functions of two LPAAT paralogs, PlsC4 and PlsC5, from the psychrotrophic bacterium Shewanella livingstonensis Ac10. As for their enzymatic function, lipid analysis of plsC4- and plsC5-inactivated mutants revealed that PlsC4 prefers iso-tridecanoic acid (C12-chain length, methyl-branched), whereas PlsC5 prefers palmitoleic acid (C16-chain length, monounsaturated). Regarding the physiological role, we found that plsC4, not plsC5, contributes to tolerance to cold stress. Using bioinformatics analysis, we demonstrated that orthologs of PlsC4/PlsC5 and their close relatives, constituting a new clade of LPAATs, are present in many γ-proteobacteria. We also found that LPAATs of this clade are phylogenetically distant from principal LPAATs, such as PlsC1 of S. livingstonensis Ac10, which are universally conserved among bacteria, suggesting the presence of functionally differentiated LPAATs in these bacteria.ConclusionsPlsC4 and PlsC5, which are LPAAT paralogs of S. livingstonensis Ac10, play different roles in phospholipid production and bacterial physiology. An enzyme belonging to PlsC4/PlsC5 subfamilies and their close relatives are present, in addition to principal LPAATs, in many γ-proteobacteria, suggesting that the division of roles is more common than previously thought. Thus, both principal LPAATs and PlsC4/PlsC5-related enzymes should be considered to decipher the metabolism and physiology of bacterial cell membranes.

Effect of Seasonal Variation on Leaf Cuticular Waxes’ Composition in the Mediterranean Cork Oak (Quercus suber L.)

Quercus suber L. (cork oak) leaves were analyzed along one annual cycle for cuticular wax content and chemical composition. This species, well adapted to the long dry summer conditions prevailing in the Mediterranean, has a leaf life span of about one year. The cuticular wax revealed a seasonal variation with a coverage increase from the newly expanded leaves (115.7 µg/cm2 in spring) to a maximum value in fully expanded leaves (235.6 µg/cm2 after summer). Triterpenoids dominated the wax composition throughout the leaf life cycle, corresponding in young leaves to 26 µg/cm2 (22.6% of the total wax) and 116.0 µg/cm2 (49% of the total wax) in mature leaves, with lupeol constituting about 70% of this fraction. The total aliphatic compounds increased from 39 µg/cm2 (young leaves) to 71 µg/cm2 (mature leaves) and then decreased to 22 µg/cm2 and slightly increased during the remaining period. The major aliphatic compounds were fatty acids, mostly with C16 (hexadecanoic acid) and C28 (octacosanoic acid) chain lengths. Since pentacyclic triterpenoids are located almost exclusively within the cutin matrix (intracuticular wax), the increase in the cyclic-to-acyclic component ratio after summer shows an extensive deposition of intracuticular waxes in association with the establishment of mechanical and thermal stability and of water barrier properties in the mature leaf cuticle.

Tailoring carbon chains for repairing graphite from spent lithium-ion battery toward closed-circuit recycling

Graphite, as a strategic mineral resource, the recycling from spent lithium-ion batteries (LIBs) has attracted considerable attention for meeting considerable economic value. However, closed-circuit recycling still suffers from the lack of effective repair methods. Considering the existing defects, a series of C-chain length carbons have been successfully introduced to repair spent graphite. Obviously, with the evolution of carbon resources, the thickness and pores of the coating layer were tailored with the functional groups. Benefitting from the increased active sites and created fold structure, their coulombic efficiency is obviously restored from 14% to 86.89%, while the stable capacity is kept at approximately 384.9 mAh g−1 after 100 cycles. Moreover, their excellent rate properties are kept about approximately 200 mAh g−1 at 2 C, meeting the standard of commercial materials. Supported by the detailed kinetic behaviors, the enhanced rate is mainly dominated by pseudocapacitive behaviors, accompanied by deepening redox reactions. Meanwhile, the cost of the proposed approach for recycling spent graphite is 894.87 $ t−1, and the recycling profit for regenerating graphite is approximately 7000 $ t−1. Given this, this work is anticipated to shed light on the closed-circuit recycling of spent graphite and offer significant strategies to repair graphite.

Lipidomic profiling of Pleurotus ostreatus by LC/MS Q-TOF analysis

In this paper, for the first time a lipidomic analysis on Pleurotus ostreatus species was performed by liquid chromatography quadrupole time-of-flight mass spectrometry (LC/MS Q-TOF). Twenty-seven lipid classes, including polar and non-polar lipid classes, were detected. Free fatty acids (FA) were the predominant fraction (>57%), followed by fatty acid ester of hydroxyl fatty acid and ceramide. C18 chain length and two double bonds were the main structural characteristics for FA. Phosphatydilcholine, phosphatydiletanolamine, and glycerophosphates showed high percentages of polyunsaturated fatty acids. Unconventional fatty acids, such as odd and oxygenated chains, were detected. The highest odd/even ratio was found in hexosylceramides and sphingomyelin, while oxygenated chains were mainly represented in ceramides. As a preliminary approach, the results of lipid molecular species, subjected to principal component analysis and discriminant analysis, were able to differentiate P. ostreatus samples on the base of grown substrate. The results of the comprehensive analysis of P. ostreatus lipids are useful to evaluate the lipid nutritional value and could facilitate exploitation of P. ostreatus consumption.

Supramolecular Glycolipid-Based Hydro-/Organogels with Enzymatic Bioactive Release Ability by Tuning the Chain Length and Headgroup Size.

Designing of supramolecular hydro-/organogels having desired properties, biocompatibility, and stimuli responsiveness is a challenging task. Herein, the gelation ability of amphiphilic glycolipid-based gelators in a wide range of solvents is explored. The structure-function relationship was established by varying the chain length and polar headgroup size of amphiphilic gelators. The prepared hydro-/organogels were characterized by employing several techniques such as differential scanning calorimetry (DSC), rheology, field emission scanning electron microscopy (FE-SEM), high-resolution transmission electron microscopy (HR-TEM), X-ray diffraction (XRD), etc. The thermal stability of hydro-/organogels increased with an increase in chain length. Rheological analysis depicted that variation in chain length and headgroup size of amphiphilic gelators significantly affected the gel strength and stability. The self-assembled morphology of hydro-/organogel samples revealed the compact entangled fibrillar network structures. After comparing the energy-minimized molecular length with the d-spacing value obtained by XRD, interdigitated bilayer packing in the gel network was established. The bioactive encapsulation and enzymatic release study of hydro-/organogels portrayed their potential application in the biomedical field. To our delight, glycolipid 16M (C16 chain length) formed a molecular hydrogel with injectable and thixotropic behaviors. High critical strain value, thixotropy, injectability, thermoreversibility, and faster bioactive release for the 16M-W hydrogel proved crucial to predict its future applications. Overall, glycolipid amphiphiles designed by upholding proper hydrophilic-lipophilic balance can form multifunctional supramolecular hydrogels with excellent implementation in the drug delivery system.

Enzymatic interesterification to produce zero-trans and dialkylketones-free fats from rapeseed oil

This study aims to evaluate the potential of applying enzymatic interesterification (EIE) to produce new healthy zero-trans high vitaminic content margarine fats, based on rapeseed oil (RO) only, with a specific focus on process-induced contaminants: the dialkylketones. Three blends made of RO and fully hydrogenated rapeseed oil (60:40, 70:30 and 80:20 wt:wt%) were considered. Compositional and melting properties, polymorphic behavior, appearance and textural characteristics were compared before and after interesterification. Interesterification improved both functional and textural characteristics. Enzymatic interesterification produced fats which presented similar triacylglycerol profile and physicochemical properties as the chemically interesterified one (CIE), however, preserving more tocopherols and without forming dialkylketones (process-induced contaminants). On the contrary, it was shown that after CIE, dialkylketones were formed: C18:1–C18:1 and C18:1–C18 chain-lengths being the major ones, and interestingly, their amount increased with the unsaturation in the blends. Our results indicate the great potential of enzymatic interesterification to produce new healthy fats entirely based on rapeseed oil. This study provides valuable information for the food industry, showing EIE as cutting-edge sustainable technology.