Peptide Bond Research Articles

A Mild and Eco-friendly, One-pot Synthesis of 2-hydroxy-Narylacetamides from 2-chloro-N-arylacetamides

Abstract: A mild and eco-friendly one-pot, two-step procedure has been developed for the synthesis of 2-hydroxy-N-arylacetamides from 2-chloro-N-arylacetamides. The procedure overcomes the cleavage of the amide linkage in 2-chloroacetamides, which is usually observed under reflux conditions with the hydroxide when the nucleophilic substitution of the halide is attempted. The reactions were performed by refluxing 2-chloro-N-arylacetamides with Cu(OAc)2 and DIPEA in the ethanol medium to facilitate an acetate exchange with the halogen. Subsequently, by the addition of ethanolic KOH solution to the same reaction flask, the ester linkage was selectively cleaved in the presence of the amide, taking advantage of the difference in electrophilicity. The procedure afforded good yields of the desired products, which are valuable intermediates for several biologically active molecules, in a short reaction time with ease of isolation. The experimental conditions employed are simple and offer the possibility of scaling up to higher quantities.

One-pot synthesis of copolyamide PA MXDT-MXD6 towards oxygen-barrier and high-temperature transparent applications

Semi-aromatic polyamides have long been recognized for their exceptional comprehensive properties in numerous demanding applications. Among them, poly(m-xylylene adipamide) (MXD6) was commonly used in oxygen-barrier packaging but suffered diminished transparency due to thermal crystallization. Herein, we introduced terephthalic acid (PTA) as rigid monomer units into the chain of MXD6 to prepare amorphous copolyamides PA MXDT-MXD6 via one-pot polycondensation, guided by thermal analysis. The chemical structure of copolyamides was confirmed using 1H NMR and FTIR spectra. Thermal analysis revealed that the copolyamides exhibited high thermal stability, amorphous characteristics, and improved glass transition temperatures (110.9–136.5 °C). Pyrolysis kinetics further demonstrated that copolyamides have enhanced thermal stability and lifetime. Furthermore, copolymerization resulted in numerous amide bonds conjugated with benzene rings, leading to superior high-temperature transparency, oxygen-barrier, and mechanical properties compared to MXD6 and other reference polyamides. These characteristics indicate the potential suitability of copolyamides as transparent and heat-resistant barrier materials.

Rational design of a bacterial import system for new-to-nature molecules

Integration of novel compounds into biological processes holds significant potential for modifying or expanding existing cellular functions. However, the cellular uptake of these compounds is often hindered by selectively permeable membranes. We present a novel bacterial transport system that has been rationally designed to address this challenge. Our approach utilizes a highly promiscuous sulfonate membrane transporter, which allows the passage of cargo molecules attached as amides to a sulfobutanoate transport vector molecule into the cytoplasm of the cell. These cargoes can then be unloaded from the sulfobutanoyl amides using an engineered variant of the enzyme γ-glutamyl transferase, which hydrolyzes the amide bond and releases the cargo molecule within the cell. Here, we provide evidence for the broad substrate specificity of both components of the system by evaluating a panel of structurally diverse sulfobutanoyl amides. Furthermore, we successfully implement the synthetic uptake system in vivo and showcase its functionality by importing an impermeant non-canonical amino acid.

Catalysis driven by an amyloid–substrate complex

Amine modification through nucleophilic attack of the amine functionality is a very common chemical transformation. Under biorelevant conditions using acidic-to-neutral pH buffer, however, the nucleophilic reaction of alkyl amines (pKa ≈ 10) is not facile due to the generation of ammonium ions lacking nucleophilicity. Here, we disclose a unique molecular transformation system, catalysis driven by amyloid-substrate complex (CASL), that promotes amine modifications in acidic buffer. Ammonium ions attached to molecules with amyloid-binding capability were activated through deprotonation due to the close proximity to the amyloid catalyst formed by Ac-Asn-Phe-Gly-Ala-Ile-Leu-NH2 (NL6), derived from islet amyloid polypeptide (IAPP). Under the CASL conditions, alkyl amines underwent various modifications, i.e., acylation, arylation, cyclization, and alkylation, in acidic buffer. Crystallographic analysis and chemical modification studies of the amyloid catalysts suggested that the carbonyl oxygen of the Phe-Gly amide bond of NL6 plays a key role in activating the substrate amine by forming a hydrogen bond. Using CASL, selective conversion of substrates possessing equivalently reactive amine functionalities was achieved in catalytic reactions using amyloids. CASL provides a unique method for applying nucleophilic conversion reactions of amines in diverse fields of chemistry and biology.

Acid-Activated TAT Peptide-Modified Biomimetic Boron Nitride Nanoparticles for Enhanced Targeted Codelivery of Doxorubicin and Indocyanine Green: A Synergistic Cancer Photothermal and Chemotherapeutic Approach.

The evolution of nano-drug delivery systems addresses the limitations of conventional cancer treatments with stimulus-responsive nanomaterial-based delivery systems presenting temporal and spatial advantages. Among various nanomaterials, boron nitride nanoparticles (BNNs) demonstrate significant potential in drug delivery and cancer treatment, providing a high drug loading capacity, multifunctionality, and low toxicity. However, the challenge lies in augmenting nanomaterial accumulation exclusively within tumors while preserving healthy tissues. To address this, we introduce a novel approach involving cancer cell membrane-functionalized BNNs (CM-BIDdT) for the codelivery of doxorubicin (Dox) and indocyanine green to treat homologous tumor. The cancer cell membrane biomimetic CM-BIDdT nanoparticles possess highly efficient homologous targeting capabilities toward tumor cells. The surface modification with acylated TAT peptides (dTAT) further enhances the nanoparticle intracellular accumulation. Consequently, CM-BIDdT nanoparticles, responsive to the acidic tumor microenvironment, hydrolyze amide bonds, activate the transmembrane penetrating function, and achieve precise targeting with substantial accumulation at the tumor site. Additionally, the photothermal effect of CM-BIDdT under laser irradiation not only kills cells through thermal ablation but also destroys the membrane on the surface of the nanoparticles, facilitating Dox release. Therefore, the fabricated CM-BIDdT nanoparticles orchestrate chemo-photothermal combination therapy and effectively inhibit tumor growth with minimal adverse effects, holding promise as a new modality for synergistic cancer treatment.

Ultrasonic monitoring of enzymatic hydrolysis of proteins. 2. Relaxation effects

The paper investigates the occurrence of relaxation processes in enzymatic hydrolysis of whey proteins in phosphate buffer using high-resolution ultrasonic spectroscopy. The hydrolysis produces a frequency-dependent evolution of ultrasonic velocity and attenuation originated by the proton transfer between the terminal group of protein hydrolysates and the phosphate ions. Such frequency dependence is absent in other systems, e.g., Tris buffer. Real-time profiles of ultrasonic velocity and attenuation measured during the hydrolysis of β–lactoglobulin, α–lactalbumin and bovine serum albumin by α–chymotrypsin were employed in quantitative analysis of the relaxation mechanisms, relaxation times, determination of the proton transfer rate constants and the reaction volume. The proton transfer is characterised by the rate constant 9.4 x 107 L mol-1 s-1 and the adiabatic reaction volume 24 x 10-6 m3 mol-1. The obtained reaction volume agrees well with thermodynamic data for ionisation volumes and enthalpies of the terminal amino group and phosphate. The described methodology for estimating the relaxation contribution to ultrasonic characteristics allows for precision real-time ultrasonic measurements of the concentration of peptide bonds cleaved during protein hydrolysis in a broad range of environmental conditions.

Enzyme engineering lets us play with new building blocks in non-ribosomal peptide synthesis

In a recent issue of Nature Chemical Biology, Folger etal. demonstrated a high-throughput approach for engineering peptide bond forming domains from non-ribosomal peptide synthesis. A non-ribosomal peptide synthetase module from surfactin biosynthesis was reprogrammed to accept a fatty acid substrate into peptide biosynthesis, thus illustrating the potential of this approach for generating novel bioactive peptides.

Postassembly Modification of Peptides by Histidine-Directed β-C(sp3)-H Arylation of Alanine at the Internal Positions: Overcoming the Inhibitory Effect of Peptide Bonds.

Peptide modification by C(sp3)-H functionalization of residues at the internal positions remains underdeveloped due to the inhibitory effect of backbone amides. In this study, using histidine (His) as an endogenous directing group, we developed a novel method for the β-C(sp3)-H functionalization of alanine (Ala) at diverse positions of peptides. Through this approach, a wide range of linear peptides were modified on the side-chain of Ala adjacent to His to afford the functionalized peptides in moderate to good yield and excellent position selectivity. Furthermore, conjugation of peptides with functional molecules such as glucuronide, oleanolic acid, dipeptide, and fluorophore derivatives was achieved.

The role of the master cancer regulator Pin1 in the development and treatment of cancer.

This review examines the complex role of Pin1 in the development and treatment of cancer. Pin1 is the only peptidyl-prolyl isomerase (PPIase) that can recognize and isomerize phosphorylated Ser/Thr-Pro peptide bonds. Pin1 catalyzes a structural change in phosphorylated Ser/Thr-Pro motifs that can modulate protein function and thereby impact cell cycle regulation and tumorigenesis. The molecular mechanisms by which Pin1 contributes to oncogenesis are reviewed, including Pin1 overexpression and its correlation with poor cancer prognosis, and the contribution of Pin1 to aggressive tumor phenotypes involved in therapeutic resistance is discussed, with an emphasis on cancer stem cells, the epithelial-to-mesenchymal transition (EMT), and immunosuppression. The therapeutic potential of Pin1 inhibition in cancer is discussed, along with the promise and the difficulties in identifying potent, drug-like, small-molecule Pin1 inhibitors. The available evidence supports the efficacy of targeting Pin1 as a novel cancer therapeutic by analyzing the role of Pin1 in a complex network of cancer-driving pathways and illustrating the potential of synergistic drug combinations with Pin1 inhibitors for treating aggressive and drug-resistant tumors.

Bacillus velezensis strain NA16 shows high poultry feather-degrading efficiency, protease and amino acid production

Isolated Bacillus velezensis strain NA16, which produces proteases, amino acids and the transcription levels of different keratinolytic enzymes and disulfide reductase genes in whole gene sequencing, was evaluated during feather degradation. The result shows under optimum fermentation conditions, chicken feather fermentation showed total amino acid concentration of 7599 mg/L, degradation efficiency of 99.3% at 72 h, and protease activity of 1058 U/mL and keratinase activity of 288 U/mL at 48 h. Goose feather fermentation showed total amino acid concentration of 4918 mg/L (96 h), and degradation efficiency was 98.9% at 120 h. Chicken feather fermentation broth at 72 h showed high levels of 17 amino acids, particularly phenylalanine (1050 ± 1.90 mg/L), valine (960 ± 1.04 mg/L), and glutamic (950 ± 3.00 mg/L). Scanning electron microscopy and Fourier transform infrared analysis revealed the essential role of peptide bond cleavage in structural changes and degradation of feathers. Protein purification and zymographic analyses revealed a key role in feather degradation of the 39-kDa protein encoded by gene1031, identified as an S8 family serine peptidase. Whole genome sequencing of NA16 revealed 26 metalloproteinase genes and 22 serine protease genes. Among the proteins, S8 family serine peptidase (gene1031, gene1428) and S9 family peptidase (gene3132) were shown by transcription analysis to play major roles in chicken feather degradation. These findings revealed the transcription levels of different families of keratinolytic enzymes in the degradation of feather keratin by microorganisms, and suggested potential applications of NA16 in feather waste management and amino acid production.

Probing Backbone Coupling within Hydrated Proteins with Two-Color 2D Infrared Spectroscopy.

The vibrational coupling between protein backbone modes and the role of water interactions are important topics in biomolecular spectroscopy. Our work reports the first study of the coupling between amide I and amide A modes within peptides and proteins with secondary structure and water contacts. We use two-color two-dimensional infrared (2D IR) spectroscopy and observe cross peaks between amide I and amide A modes. In experiments with peptides with different secondary structures and side chains, we observe that the spectra are sensitive to secondary structure. Water interactions affect the cross peaks, which may be useful as probes for the accessibility of protein sites to hydration water. Moving to two-color 2D IR spectra of proteins, the data demonstrate that the cross peaks integrate the sensitivities of both amide I and amide A spectra and that a two-color detection scheme may be a promising tool for probing secondary structures in proteins.

Influence of Biogenic Material Content on the Biodegradability of Styrene-Butadiene Composites with Incorporated Chlorella vulgaris Biomass.

Bio-fillers are intensively studied for advanced polymer composite circular design and production. In this context, the algal biomass may be considered an important and relatively low-cost resource, when harvested as a by-product from wastewater treatment plants. The biomass of the algal species Chlorella vulgaris is frequently used in this type of environmental process, and its macro constituents' composition ranges from around 15-25% carbohydrates, 10-20% lipids, and 50-60% proteins. Poly (styrene-butadiene-styrene) (SBS) copolymers have a matrix composed of glassy polystyrene domains connected by flexible polybutadiene segments. Although the physical-mechanical properties of SBS copolymers recommend them for many industrial applications, they have the drawback of low biodegradability. This study aimed to assess the aerobic biodegradability of polymer composites by integrating biomass from Chlorella vulgaris at varying mass percentages of 5, 10, and 20% into SBS copolymer composites. Biodegradation tests were conducted under industrial composting conditions (58 °C and 50% relative humidity) for 180 days. The biodegradability of materials was evaluated by measuring the CO2 produced in each vessel during the study period. Potential correlations between the amount of carbon dioxide released and the percentage of biomass added to the polymer matrix were examined. Structural and morphological changes were assessed using Fourier Transform infrared spectroscopy (FTIR), thermal analysis (DSC), and scanning electron microscopy (SEM). Physical and chemical testing revealed a decrease in sample density after the industrial composting test, along with noticeable changes in melt flow index (MFI). The observed physical and chemical changes, coupled with FTIR, SEM, and DSC data, indicate increased cross-linking and higher porosity in biodegraded polymer structures with higher biomass content. This behavior is likely due to the formation of cross-linked connections between polymer chains and polypeptide chains resulting from protein degradation, enhancing connections between polystyrene units facilitated by peptide bonds with the benzene units of the styrene blocks within the polymer matrix.

Synthesis and Reactivity of Bis-tris(pyrazolyl)borate Lanthanide/Aluminum Heterobimetallic Trihydride Complexes.

Molecular heterobimetallic hydride complexes of lanthanide (Ln) and main-group (MG) metals exhibit chemical properties unique from their monometallic counterparts and are highly reactive species, making their synthesis and isolation challenging. Herein, molecular Ln/Al heterobimetallic trihydrides [Ln(Tp)2(μ-H)2Al(H)(N″)] [2-Ln; Ln = Y, Sm, Dy, Yb; Tp = hydrotris(1-pyrazolyl)borate; N″ = N(SiMe3)2] have been synthesized by facile insertion of aminoalane [Me3N·AlH3] into the Ln-N amide bonds of [Ln(Tp)2(N″)] (1-Ln). Thus, this is a simple synthetic strategy to access a range of Ln/Al hydrides. Reactivity studies demonstrate that 2-Ln is a heterobimetallic hydride, with evidence for the cooperative nature of 2-Ln shown by the catalytic amine-borane dehydrocoupling under ambient conditions in contrast to its monomeric counterparts.

Multiple strategies to improve the secretory expression of prolyl endopeptidase in Aspergillus niger

Prolyl Endopeptidase (PEP) has the unique ability to hydrolyze the carboxyl terminal peptide bonds of Proline. This enzyme holds great value in various fields including medical research, disease treatment, human diet, and food production. Aspergillus niger is a significant food-grade protein expression system renowned for its high safety. It is considered an ideal system for producing Aspergillus-derived PEP due to its ability to secrete a large amount of endogenous proteins. Our research group successfully constructed the Aspergillus niger PEP engineering strain in the early stages by eliminating the background protein AsaA, thereby increasing secretion protein production. In this article, we explore new solutions to further enhance production. Experimental investigations were conducted to regulate secretory protein production at different levels by modifying the 5′UTR and reconstructing the secretion pathways. The results demonstrate that the strain modified by the 5′UTR and Kozak sequence (glaA5'UTR-GCCACC, glaA::protA) exhibited a 1.88-fold increase in gene transcription and a 105% increase in extracellular PEP activity compared to the non-modified strain. Co-expression of the ERdjs gene AnScj1 further increased extracellular PEP activity by 168%. However, deletion of derA or vps10, key genes in the Aspergillus niger secretory protein degradation pathway, resulted in reduced levels of gene transcription and secretory expression. This article holds practical significance in enhancing the secretion and expression of PEP, obtaining higher-yield strains, and exploring optimization strategies for highly expressed proteins.

The effect of microsolvation on the structure, nuclear quadrupole coupling, and internal rotation: The methyl carbamate⋯(H2O)1-3 complexes.

Microsolvation of the carbamate moiety delivers precise information on complexation effects on the N-C=O backbone and is of relevance to the peptide bond functionality. In this context, the mono-, di-, and trihydrated complexes of methyl carbamate have been studied in molecular expansion by high-resolution microwave spectroscopy, using chirped-pulse and Fabry-Perot resonator Fourier transform microwave instruments covering the frequency range from 2 to 18GHz. From the rotational constants of the parent and the 18Ow substituted monoisotopologues, accurate values have been derived for the geometries of the hydrogen bond interactions. The nuclear quadrupole coupling constant χcc of the nitrogen nucleus provides a direct measure of complexation changes and decreases with the degree of hydration, whereas the hindered internal rotation barrier increases slightly with microsolvation. Both tendencies could have a common origin in the π-cooperative inductive effects as the microsolvation series progresses. All transitions are split by the internal rotation of the methyl top and the nuclear quadrupole coupling, and in the largest cluster, they are additionally split by an inversion motion.

Development of New Drugs to Treat Tuberculosis Based on the Dinitrobenzamide Scaffold.

Tuberculosis (TB) continues to be a major global health challenge and a leading cause of death from infectious diseases. Inspired by the results from a previous work by our group on antimycobacterial N-alkylnitrobenzamides, which are structurally related to the nitrobenzamide family of decaprenylphosphoryl-β-d-ribose oxidase (DprE1) inhibitors, the present study explored a broad array of substituted benzamides. We particularly focused on previously unexplored 3,5-dinitrobenzamide derivatives. Starting with 3,5-dinitrobenzoic acid, we synthesized a diverse library of amides, incorporating both linear and cyclic amine moieties and also assessed the impact of terminal aromatic groups connected through ether, ester, or amide bonds on the bioactivity of the compounds. The synthesis primarily utilized nucleophilic addition/elimination, SN2, and Mitsunobu reactions. The activity was impacted mainly by two structural features, the addition of an aromatic moiety as a terminal group and the type of linker. The most interesting compounds (c2, d1, and d2, MIC = 0.031 μg/mL) exhibited activities against Mycobacterium Tuberculosis (Mtb) H37Rv comparable to isoniazid. Complementary computational studies helped elucidate potential interactions with DprE1, enhancing our understanding of the molecular basis of their action. Our findings suggest that the most active compounds provide a promising foundation for the continued development of new antimycobacterial agents.

Highly Stable Silicon Anode Enabled by a Water-Soluble Tannic Acid Functionalized Dual-Network Binder.

Silicon (Si), a high-capacity electrode material, is crucial for achieving high-energy-density lithium-ion batteries. However, Si suffers from poor cycling stability due to its significant volume changes during operation. In this work, a tannic acid functionalized aqueous dual-network binder with an intramolecular tannic acid functionalized network has been synthesized, which is composed of covalent-cross-linked polyamide and ionic-cross-linked alginate (Alg(Ni)-PAM-TA), and employed as an advanced binder for stabilizing Si anodes. The resultant Alg(Ni)-PAM-TA binder, incorporating diverse functional groups including amide, carboxylic acid, and dynamic hydrogen bonds, can easily interact with both Si nanoparticles and the Cu foil, thereby facilitating the formation of a highly resilient network characterized by exceptional adhesion strength. Moreover, molecular dynamics (MD) simulations indicate that the Alg(Ni)-PAM-TA network shows an increased intramolecular hydrogen bond number with increasing concentration of TA and a decreased intramolecular hydrogen bond between PAM and Alg as a result of the aggregation behavior of tannic acids themselves. Consequently, the binder significantly enhances the Si electrode's integrity throughout repeated charge/discharge cycles. At a current density of 0.84 A g-1, the Si electrode retains a capacity of 1863.4 mAh g-1 after 200 cycles. This aqueous binder functionalized with the intramolecular network via the incorporation of TA molecules holds great promise for the development of high-energy-density lithium-ion batteries.

Copolymers of Gelatin-graft-poly(3-hexylthiophene) for Transient Electronics.

As transient electronics continue to advance, the demand for new materials has given rise to the exploration of conducting polymer (CP)-based electronic materials. The big challenge lies in balancing conductivity while introducing controlled degradable properties into CP-based transient materials. In response to this, we present in this work a concept of using conducting polymers attached to an enzymatically biodegradable biopolymer to create transient polymer electronics materials. Specifically, poly(3-hexyl thiophene) (P3HT) is covalently grafted onto biopolymer gelatin, affording graft copolymer gelatin-graft-poly(3-hexyl thiophene) (termed Gel-g-P3HT). The thin films of Gel-g-P3HT that were produced by optimized processing solvent (THF/H2O cosolvent) showed enhanced π-π stacking domains of P3HT, resulting in semiconducting thin films with good electroactivity. Due to the presence of amide bonds in the gelatin backbone, Gel-g-P3HT underwent degradation over a period of 5 days, resulting in the formation of amphiphilic micellar nanoparticles that are biocompatible and nontoxic. The potential of these conductive and degradable graft copolymers was demonstrated in a pressure sensor. This research paves the way for developing biocompatible and enzymatically degradable polymer materials based on P3HT, enabling the next generation of transient polymer electronics for diverse applications, such as skin, implantable, and environmental electronics.

Biodegradation Study of Styrene-Butadiene Composites with Incorporated Arthrospira platensis Biomass.

The preparation of polymer composites that incorporate material of a biogenic nature in the polymer matrices may lead to a reduction in fossil polymer consumption and a potentially higher biodegradability. Furthermore, microalgae biomass as biogenic filler has the advantage of fast growth and high tolerance to different types of culture media with higher production yields than those provided by the biomass of terrestrial crops. On the other hand, algal biomass can be a secondary product in wastewater treatment processes. For the present study, an SBS polymer composite (SBSC) containing 25% (w/w) copolymer SBS1 (linear copolymer: 30% styrene and 70% butadiene), 50% (w/w) copolymer SBS2 (linear copolymer: 40% styrene and 60% butadiene), and 25% (w/w) paraffin oil was prepared. Arthrospira platensis biomass (moisture content 6.0 ± 0.5%) was incorporated into the SBSC in 5, 10, 20, and 30% (w/w) ratios to obtain polymer composites with spirulina biomass. For the biodegradation studies, the ISO 14855-1:2012(E) standard was applied, with slight changes, as per the specificity of our experiments. The degradation of the studied materials was followed by quantitatively monitoring the CO2 resulting from the degradation process and captured by absorption in NaOH solution 0.5 mol/L. The structural and morphological changes induced by the industrial composting test on the materials were followed by physical-mechanical, FTIR, SEM, and DSC analysis. The obtained results were compared to create a picture of the material transformation during the composting period. Thus, the collected data indicate two biodegradation processes, of the polymer and the biomass, which take place at the same time at different rates, which influence each other. On the other hand, it is found that the material becomes less ordered, with a sponge-like morphology; the increase in the percentage of biomass leads to an advanced degree of degradation of the material. The FTIR analysis data suggest the possibility of the formation of peptide bonds between the aromatic nuclei in the styrene block and the molecular residues resulting from biomass biodegradation. It seems that in industrial composting conditions, the area of the polystyrene blocks from the SBS-based composite is preferentially transformed in the process.

NMI-SO2Cl2-Mediated Amide Bond Formation: Facile Synthesis of Some Dihydrotriazolopyrimidine Amide Derivatives as Potential Anti-Inflammatory and Anti-Tubercular Agents.

Facile access to some novel biologically relevant dihydrotriazolopyrimidine carboxylic acid-derived amide analogues using NMI/SO2Cl2, and aromatic and aliphatic primary and secondary amines, is reported herein. The role of N-methylimidazole (NMI) as the base and sulfuryl chloride (SO2Cl2) as the coupling reagent has been effectively realized in accessing these molecules in good to excellent yields. The feasibility of the developed protocol has also been extended to the gram-scale synthesis of N-benzylbenzamide in a 75% yield from benzoic acid and benzyl amine. The newly synthesized compounds were tested via in vitro anti-inflammatory and anti-tubercular activity studies. The compounds 6aa and 6be were found to be the most active anti-inflammatory agents, whereas 6cb and 6ch were found to exhibit promising anti-tubercular potency when compared to other synthesized molecules. The structure-activity relationship (SAR) studies revealed the importance of the presence of electron-donating functionalities in enhancing the anti-inflammatory potential of the newly synthesized molecules. However, the presence of electron-withdrawing substituents was found to be significant for improving their anti-tubercular potency.