Wave Attenuation Research Articles

Dual-purpose wave farm with nonlinear stiffness mechanism for energy extraction and wave attenuation

Dual-purpose wave farm with nonlinear stiffness mechanism for energy extraction and wave attenuation

In vitro experimental study on interventional ultrasound-mediated microbubble cavitation lithotripsy

Abstract Ultrasound-mediated microbubble cavitation lithotripsy as a new minimally invasive approach has received great attention for the treatment of urinary stones. However, the attenuation of ultrasonic waves in human tissues and stone displacement during lithotripsy are two key issues limiting the development of this technology. In this paper, a method of interventional ultrasound-mediated microbubble cavitation lithotripsy is proposed, which can realize the in-situ delivery of ultrasonic waves and microbubbles. A piezoelectric ultrasound transducer with the center frequency of 461 kHz and output peak to peak acoustic pressures of 3.2 MPa is fabricated, and microbubbles with the concentration of 1.33×109/ml are synthesized. An extracorporeal experiment platform is built and in vitro tests of ultrasound mediated microbubble cavitation lithotripsy are conducted by using microbubbles with different concentrations and water. The results show that the proposed interventional ultrasound-mediated microbubble cavitation lithotripsy is an efficient method for the fragmentation of ureteral stones. The maximum mass reduction of the stone is 9.4 mg within 30 minutes of treatment under the combined action of ultrasound with the peak-negative pressure of 1.6 MPa and center frequency of 461 kHz and microbubbles with the concentration of 3.325×107/ml. The research results will provide a technical basis for further optimization of subsequent tentative schemes, in vivo experiments with animals and future clinical applications.

Numerical study on the polarity change process during internal wave shoaling

Polarity change is an important mechanism for internal waves shoaling. In this study, a numerical model for simulating the real-scale internal wave passing over slope-shelf topography is established based on the Fourier pseudo-spectral method and weakly nonlinear theory. By numerical simulation, the effects of shelf height, initial wave amplitude, and inclination angle on the waveform characteristics and energy properties of the internal wave during its shoaling are investigated. In the polarity change process, the initial internal wave converts into a depression wave and a generated elevation wave behind it. The distance between the peak of the elevation wave and the trough of the depression wave is a key feature to describe the polarity change. In terms of energy properties, the energy ratio of depression and generated elevation waves compared with the initial wave as well as their relative magnitude is mainly determined by the shelf height. In addition, the initial wave amplitude also affects the generation of the elevation wave and the attenuation of the depression wave to a certain extent. The increase in the inclination angle hinders the formation of the elevation wave but has little effect on the depression wave energy.

Analysis of train-induced aerodynamic characteristics and pressure-relief measures relating to fully enclosed noise barriers installed on railway bridges

Fully enclosed noise barriers (FENBs) are increasingly being installed on high-speed railway bridges for noise pollution control. However, the aerodynamic effects of high-speed trains passing FENBs have an adverse impact on barrier durability and generate micro-pressure waves. In this paper, a numerical model of a train passing an FENB on a bridge is established. The aerodynamic pressure distribution along the FENB is analyzed for both a single train and two trains passing one another. The propagation characteristics and evolution mechanisms of pressure waves are then investigated. The results show that the pressure is lower at the ends of the FENB and higher in the middle along the direction of train travel. The peak positive and negative pressures at the mid-span are 1.95 and 4.47 times higher than those at the ends, respectively. This distribution is caused by the propagation, superposition, reflection, and attenuation of pressure waves. Compression waves account for 78.9% of the peak positive pressure. An amplification factor must be considered when estimating the impact of two trains passing one another. Analysis of five pressure-relief schemes shows that arranging a single pressure-relief hole at a high-pressure location effectively alleviates the over-pressure in the FENB. The overall pressure-relief effect is an exponential function of the single opening area. Considering a constant opening area, arranging several relief holes at equal spacing optimizes the adverse pressure distribution compared with the single-hole relief scheme. The equivalent forces of the multi-hole scheme are 3.35% and 7.58% lower than in the single-hole scheme.

Simulation study of Rayleigh wave inspection of subsurface white etching crack in bearing rollers

Abstract Rolling bearings are widely used in wind energy and electric vehicle industries. One of the premature failure mode due to the contact fatigue is White Etching Crack (WEC) in the subsurface. WEC occurs preferentially in the Hertzian contact region of bearings, preferentially around multi-phase inclusions containing aluminium, manganese, and sulfur. The formation process undergoes intense plastic deformation and recrystallization. Most of WECs are 100~300 μm below the contact surface in a butterfly shape. Its principal axis is 30°~50° to the rolling direction. Since the sample preparation is difficult, this simulation study enables to better understand the interaction between WEC and ultrasonic waves for a better measurement system design. Rayleigh surface wave penetrates to a depth of about an order of magnitude of one wavelength. Its energy is concentrated near the surface containing rich WEC information. The Rayleigh wave propagation process is first analyzed based on the grain scale model established. Then the immersion inspection of WEC is simulated based on the finite element method at 15 MHz in order to compromise between the detection accuracy and defect depth. Finally, by analyzing the time and frequency domain information of the scattered signals, the quantitative relationships between crack characteristics (depth, length and tilt angle) and those of Rayleigh waves (amplitude and attenuation) can be obtained. This study paves the way for the quantitatively characterization of WEC in bearing rollers with surface integrity evaluation possibility at early stage.

The Low-Attenuation Endfire Leaky-Wave State on an Optically Transparent Lossy Film

The development of high-performance optically transparent radio frequency (RF) radiators is limited by the intrinsic loss issue of transparent conductive films (TCFs). Instead of pursuing expensive endeavors to improve the TCFs’ electrical properties, this study introduces an innovative approach that leverages leaky-wave mode manipulation to mitigate the TCFs’ attenuating effect and maximize the RF radiation. Our finding reveals that the precise control of the mode confinement on glass-coated TCFs can create a low-attenuation window for leaky-wave propagation, where the total attenuation caused by TCF dissipation and wave leakage is effectively reduced. The observed low-attenuation leaky-wave state on lossy TCFs originates from the delicate balance between wave leakage and TCF dissipation, attained at a particular glass cladding thickness. By leveraging the substantially extended radiation aperture achieved under suppressed wave attenuation, this study develops an optically transparent antenna with an enhanced endfire realized gain exceeding 15 dBi and a radiation efficiency of 66%, which is validated to offer competitive transmission performance for advancing ubiquitous wireless communication and sensing applications.

Conditions for sound absorption caused by longitudinal vibration of lightweight powder

It has been reported that powder layers composed of powder materials with a grain diameter of several tens of micrometers exhibit significant sound absorption capabilities in the low-frequency range when the bulk powder density is low. In a previous study, a model considered factors like “powder vibration” and “sound wave attenuation due to gaps between powders.” The remaining challenge lies in the unknown conditions under which a powder with a high sound absorption coefficient is formed through the attenuation of acoustic energy due to the longitudinal vibrations of the powder. In this study, we aimed to estimate these conditions based on the grain size and bulk density. The relationship between the “areal density per grain layer,” expressed as “grain diameter X bulk density,” and the first-order sound absorption peak value revealed that the sound absorption coefficient increases as the areal density per grain layer decreases.

Physical Modelling Scenarios of Tsunami Wave Attenuation Induced by Variation of Mangrove Protection Width and Sea Dike

Physical Modelling Scenarios of Tsunami Wave Attenuation Induced by Variation of Mangrove Protection Width and Sea Dike

Wave attenuation by intertidal vegetation is mediated by trade‐offs between shoot‐ and canopy‐scale plant traits

Abstract Nature‐based solutions, through conservation or (re)creation of vegetated shorelines, are recognized to mitigate the impact of waves and erosion risks on shorelines. Wave attenuation is known to be dependent on plant traits, resulting in increasing wave attenuation rates with increasing shoot density, shoot thickness, height, and stiffness. However, following the allometric scaling theory, we hypothesize that increasing shoot density (a canopy‐scale trait) may be associated with decreasing shoot thickness and stiffness (a shoot‐scale trait), with potential opposing effects on overall wave attenuation. This study investigates (1) the presence of such allometric relations across intertidal shore plant species via existing literature and (2) the trade‐off effects on the overall wave attenuation capacity of shore vegetation through a flume experiment. Our results reveal for the first time the presence of allometric relationships between shoot‐scale and canopy‐scale plant properties in perennial intertidal plant species. Across different species, increasing shoot densities are indeed associated with decreasing shoot thickness and shoot stiffness. Next, we performed a wave flume experiment with plant mimics, showing that wave attenuation rate follows a logarithmic increase with increasing shoot density, even though the increasing shoot density was associated with thinner and more flexible individual shoots. Synthesis and applications. We conclude that wave attenuation is predominantly governed by canopy‐scale properties, but a trade‐off with shoot‐scale properties mediates the overall wave attenuation capacity of the vegetated shore. Our findings imply that nature‐based projects (re‐)creating vegetated shorelines should account for potential trade‐off effects of species‐specific plant traits at the canopy scale and individual shoot scale.

Meta-arch structure: Designed reinforcement cage to enhance vibration isolation performance

In this study, inspired by the mechanical metamaterials with bandgap properties, a new type of meta-arch structure (MAS) for the attenuation of elastic waves is proposed. In this metastructure, the reinforcement cage, typically employed to enhance the tensile properties of building materials, has been redesigned and transformed into a new structure containing circular tubes with embedded resonant microstructures. The vibration reduction performance of the MAS was illustrated by the frequency response analysis in the simulation calculation, and the generation mechanism of the vibration attenuation band was revealed. The specimens of the complex MAS consisting of gypsum, reinforced steel bars, and tubes were fabricated, and the vibration response experiments were carried out to determine the dynamic properties of the novel MAS. The results show that the designed arch structure exhibits a broad vibration attenuation band without sacrificing its structural bearing capacity. Additionally, the robustness of the band gap is demonstrated by analyzing how changes in the positions of excitation and response points influence the band gap. Moreover, the MAS can be customized for specific application scenarios of vibration reduction according to the parameter analysis. Finally, the experimental results closely align with the numerical estimations, confirming the feasibility of the design method for reducing vibrations. This work provides a new method for the development of building structures for vibration and noise control.

Influence of SU-8 curing parameters on the terahertz absorption characteristics

A plethora of polymers are excellent candidates that can be utilized to build various terahertz (THz) based systems for sensing and microfluidics. SU-8 is a versatile epoxy-based polymer with excellent properties, such as biocompatibility and good mechanical properties. Nevertheless, the impact of curing parameters on the THz absorption characteristics of SU-8 remains uncertain. This study explores the impact of various curing conditions on the THz absorption properties of SU-8. The aim is to establish a correlation between THz absorption and the polymer's cross-linking characteristics. Therefore, three key curing parameters have been examined: time, temperature, and ultraviolet (UV) exposure dose. The SU-8 samples that are cured under different conditions are examined using THz Time-Domain Spectroscopy (THz-TDS) to estimate the THz absorption coefficient. Next, the swelling experiment is conducted to evaluate the polymer cross-linking of the cured samples. The results show that curing conditions and, thus, cross-linking routines significantly influence THz wave propagation and attenuation within SU-8 samples. The findings recommended using an optimal curing dose for SU-8 spanning 1240 mJ/cm2 to 1860 mJ/cm2 which results in a relatively lower absorption coefficient while still maintaining a higher state of cross-linking. This research establishes a crucial link between SU-8 processing and its THz response. It can lay the foundation for tailored SU-8 polymer with optimized THz transmission for novel and customized biosensing and microfluidic devices.

Machine learning supported ultrasonic testing for characterization of cracks in polyethylene pipes

This study aims to develop a machine learning supported ultrasonic guided wave testing (UGWT) for detection and characterization of cracks in polyethylene (PE) pipes used for natural gas distribution. Ultrasonic testing is conducted to investigate the wave-crack interaction and determine damping properties of PE pipes. Finite element models are further built with material properties fine-tuned by wave attenuation experiments combined with cross-correlation analysis between the simulated and experimental signals. A synthetic database is populated using sensed signals over a wide range of crack geometries from numerical simulations. Finally, support vector machine (SVM) models are developed with different feature selections for classification of crack geometry and the accuracy is evaluated using both simulated and experimental cases. The findings demonstrate the potential of locating the circumferential position of crack with the ring-focusing method and classifying crack geometry in PE pipes using SVM model with central frequency features.

Scale parameters of soft structures for surrounding rock erosion prevention in rockburst-prone roadways

Practical experience in coal mines has suggested that establishing a loose and soft structure in the surrounding rock of roadways can play a role in wave attenuation, energy absorption and erosion prevention, which is conducive to the prevention of and reduction in the severity of rockburst disasters in coal mines. The scale parameters of soft structures includes two aspects: the size and the fracture degree of soft structures. The FLAC3D numerical simulation software was used to study the failure characteristics of roadways with different impact positions (roof impact, side impact) and different impact energies (104, 105, 106, and 107 J). The stress reduction rates of soft structures with different sizes and fracture degrees were calculated. Based on the stress reduction rate of the soft structure, the energy absorption effect of the soft structure around the roadway was obtained as a logarithmic function of the soft structure size, which is a power function related to its fracture degree, and the intersection range of the two curves was fitted. The stress reduction rate was 30% when the soft structure size of the surrounding rock of the roadway was 10–15 m and the fracture degree was represented by 30–40% of the coal strength, which was the most reasonable range of scale parameters. The research conclusions provide a parametric basis for improving the theory and practice of rockburst prevention and support in coal mine roadways.

Numerical solution of the boundary value problem for inertia-gravity internal waves

This paper presents a numerical calculation of the boundary value problem for the equation of free internal inertia-gravity waves in an unbounded basin of constant depth in the Boussinesq approximation and the presence of a two-dimensional vertically inhomogeneous flow. The boundary value problem for the vertical velocity amplitude has complex coefficients and is solved both numerically and by perturbation theory. Using the example of calculating the decrement of attenuation of internal waves and momentum wave flows, it is shown that the exact numerical calculation gives significantly better estimates in comparison with the perturbation method. In particular, at minimum divergence in the dispersion curves for both calculation methods, the imaginary part of the wave frequency, interpreted as the decrement of attenuation, can differ by two or three orders of magnitude. Vertical wave momentum fluxes are comparable to turbulent ones and may exceed them, with results obtained by the numerical method being almost an order of magnitude smaller than those calculated by the perturbation theory method.

Floating solar power loss due to motions induced by ocean waves: An experimental study

Whilst there is an interest in floating solar energy systems in coastal and offshore regions to utilise available sea space, they are subject to ocean waves that introduce constant momentum. Consequently, solar panels undergo periodic motions with the waves, causing a continuous change in tilt angle. The tilt angle variation is a sub-optimal process and leads to a loss of energy harnessing efficiency. To investigate this phenomenon, the present study innovatively installed a solar simulator on top of a wave tank. The solar simulator was used to generate high-strength light beams, under which, a floating solar unit was subject to periodic incident waves. Wave-induced motions to the solar system as well as the output power were measured. A systematic analysis of the results indicated that a floating solar unit can have significantly lower power output in waves, compared to its calm-water counterpart. An evident link was established between the wave-induced power loss and the wave-induced rotational movement of the panel. An empirical equation was derived which shows the power loss is predictable through the rotational amplitude. The results also highlight the importance of implementing wave attenuation technologies such as breakwaters to minimise wave-induced motions to floating solar systems. Overall, this research presents a novel experimental approach to assess the difference of floating solar power in ocean-wave versus calm-water scenarios, providing valuable insights for future solar projects on the ocean.

Analysis of the Suitability of Ultrasonic Testing for Verification of Nonuniform Welded Joints of Austenitic-Ferritic Sheets.

The purpose of the presented research was to determine the suitability of using ultrasonic testing (UT) to inspect heterogeneous, from a material point of view, welded joints on the example of the joints of a ferritic steel element with elements made of an austenitic steel. The echo technique with transverse (SEK) and longitudinal wave heads (SEL) addressed this issue. Due to the widespread use of 13CrMo4-5 and X2CrNiMo17-12-2 steel grades in the energy industry, they were selected as the test materials for the study. The objects of the presented research were welded joint specimens with thicknesses of 8, 12, and 16 mm and dimensions of 300 × 300 mm, made using the 135 metal active gas (MAG) process with the use of the Lincoln 309LSi wire-a ferritic-austenitic filler material. The stages of the research task were (1) making distance-amplitude curve (DAC) patterns from the test materials; (2) preparation of specimens of welded joints with artificial discontinuities in the form of through-holes; (3) performing UT tests on welded joints with artificial discontinuities using heads with 60° and 70° angles for the transverse wave and angle heads for longitudinal waves with similar beam insertion angles; (4) selection, by radiographic testing (RT), of welded joint specimens with natural discontinuities in the form of a lack of sidewall fusion; (5) performing UT tests on welded joints with natural discontinuities, using heads as welded joints with artificial discontinuities. It was found that (1) the highest sensitivity of discontinuity detection was obtained by performing tests on the ferritic steel side, which is due to the lower attenuation of the ultrasonic wave propagating in ferritic steel compared to austenitic steel; (2) the best detection of discontinuities could be obtained using a longitudinal ultrasonic wave; (3) there is a relationship between the thickness of the welded elements, the angle of the ultrasonic beam introduction, and the effectiveness of discontinuity detection.

An ultra-broadband multi-layer dielectric gradient honeycomb microwave absorber enhanced by the double layer metasurface

A novel, 12 mm multilayer dielectric gradient honeycomb absorber (MGHA) was designed, fabricated and analyzed with a double layer metasurface consisting of a resistive film and an artificial magnetic conductor (AMC) checkerboard. Despite its thin profile, the MGHA demonstrates significantly enhanced absorption performance across a wide frequency range due to the impedance of the composite structure. Furthermore, two distinct metasurfaces are integrated into the dielectric gradient multilayer honeycomb absorber to further enhance its low-frequency properties without increasing thickness. This structure exhibits wideband absorption from 2.8 GHz to 18 GHz, featuring three absorption peaks at 3 GHz, 11 GHz and 16 GHz. The relative bandwidth can reach nearly 136.6 % of that achieved by a common honeycomb absorber with the same thickness, while maintaining an absorption peak reflection of about −22dB. The great attenuation of incident waves is attributed to Ohmic loss on the resistive film, electric resonance effect on the checkerboard, and magnetic resonance near 17 GHz on the checkerboard metasurface. The proposed MGHA structure holds significant potential for applications in aerospace and military.

Machine learning-based monitoring of mangrove ecosystem dynamics in the Indus Delta

Mangrove forests play a vital role in carbon sequestration, typhoon-induced wave attenuation, and the provision of ecological services. However, mangrove ecosystems have experienced large-scale loss globally due to rising sea levels and anthropogenic activities. This study investigates the dynamic changes in mangrove cover within the mega-Indus delta, the largest delta in Pakistan and Southern Asia, using multi-temporal remote sensing data and machine learning techniques from 1988 to 2023. The results indicate an increasing trend in mangrove areas in the Indus Delta, with an average annual growth rate of 18.72 %. The spatial distribution of mangrove forests tends to concentrate towards the landward areas, extending along tidal channels, while losses primarily occur in the seaward regions. Rising sea levels pose a potential threat to the survival of these mangroves. The strong southwest monsoon-driven waves are the leading cause of shoreline erosion of the Indus Delta mangroves. Meanwhile, the reduction in riverine sediment discharge is not associated with the increase in mangrove area. Instead, the tidal currents influenced by the southwest monsoon carry sediments into the delta’s tidal channels, causing them to fill and create suitable habitats for mangroves, which are the primary drivers of the observed mangrove expansion in the Indus Delta. Additionally, afforestation activities observed in the northwest and southwest parts of the study area have contributed to the restoration of mangroves. The loss of mangroves in the northernmost part of the northwest region was attributed to an oil spill incident. This study highlights the dynamic nature of mangrove ecosystems in the Indus Delta, characterized by an arid climate and low population density. The findings provide valuable insights into the factors influencing mangrove gain and loss and can inform management strategies for global mangrove restoration efforts.

Estimation of Antarctic sea ice thickness through observation of wave attenuation

The Close-Packing model – a physically based model for wave attenuation in sea ice – is used to infer sea ice thickness from wave observations collected in the Antarctic marginal ice zone during the PIPERS experiment. The model, calibrated for Arctic conditions, predicts ice thickness in good agreement with independent satellite measurements. The calibrated Close -Packing model, which is expressed in a simple monomial form, appears to have broad validity and, therefore, can be a suitable option for operational purposes.

Sound transmission of truss-based X-shaped inertial amplification metamaterial double panels

To enhance the low-frequency sound insulation performance of conventional double panels, this work proposes a truss-based X-shape inertial amplification (TXIA) metamaterial double panel. A semi-analytical method is developed for computing the sound transmission loss (STL) of the TXIA metamaterial double panel, with numerical and experimental validations confirming the convergence and accuracy of this method. To further investigate the low-frequency acoustic wave attenuation of the proposed structure, four configurations are analyzed and discussed. Numerical results indicate that, compared to conventional and equivalent mass double panels, the TXIA metamaterial double panel effectively shifts the STL peaks to lower frequencies, exhibiting higher STL amplitudes and a reduced low-STL region. Configurations incorporating different springs enhance the STL performance without altering mass or other parameters. The STL dips of the metamaterial double panel coincide with odd-odd modes of the double panel, which have higher radiation efficiencies. Parametric studies reveal that changes in the IA angle shift the dips induced by in-phase modes to lower frequencies, while increased stiffness shifts these in-phase dips to higher frequencies. The depth of the cavity between the two panels only affects the first-order anti-phase dip. Additionally, increased stiffness enhances the STL performance and introduces a new peak in the stiffness-controlled region. Due to its flexibility, the TXIA metamaterial double panel holds significant potential for industrial applications.