Wave Attenuation Research Articles

Wireless Wave Attenuation in Forests: An Overview of Models

In recent years, the need for reliable signal transmission in forested areas has increasingly grown, and the past few decades have witnessed significant developments in related research. With the emergence of smart forestry and precision forestry, understanding the science behind enhancing signal reliability in forests—specifically, studying the patterns and models of radio wave attenuation in these environments—has become crucial. To this end, we conducted a comprehensive review based on bibliometrics to summarize and construct the existing academic literature, revealing current research trends and hotspots. Utilizing bibliometric techniques, we analyzed the literature on radio wave attenuation in forests to summarize and evaluate previous studies. Our analysis indicates that empirical models (67%), hybrid models (21%), and equivalent models (12%) are the three main research clusters in this field. We observed that studies on radio attenuation are more prevalent in urban and artificial forests, while there is a scarcity of research in complex conditions like tropical rainforests and extreme weather; studies are more focused on UHF, VHF, and SHF frequency bands, with lesser attention given to other bands. Previous research has not adequately considered the impact of seasonal factors on signal attenuation patterns nor the influence of forest working environments.

Separation of Intrinsic and Scattering Seismic Wave Attenuation in the Crust of Central and South-Central Alaska

ABSTRACT Seismic hazard analysis is essential for evaluating the potential consequences and dangers linked to earthquakes, particularly in areas with regular seismic activity such as central and south-central Alaska. A detailed study of attenuation can help in better defining the wave behavior and so refine the ground-motion prediction. Here, we examined the scattering (Qs−1), intrinsic (Qi−1), and coda-wave (Qc−1) attenuation in central and south-central Alaska. To do so, we performed the multiple lapse time-window analysis (MLTWA) techniques and estimated the coda energy decay. We considered earthquakes that occurred between December 2014 and December 2020, with magnitudes between 2.0 and 6.5. We observed significant spatial variations in scattering loss (Qs−1) up to 3 Hz, which diminish at 6 and 12 Hz. The Wrangell block exhibits the most significant scattering loss at a frequency of 1.5 Hz. Another area of marked scattering loss was identified north of the Alaska Range (AR), where it was pronounced up to 6 Hz. The area around Anchorage registered the lowest intrinsic absorption across all the central frequencies, whereas the highest values were detected north of the AR, particularly at 3 and 6 Hz. The seismic albedo (B0) in central and south-central Alaska varies spatially and is mainly dominated by scattering loss up to 3 Hz. Both the Chugach mountains and Yakutat block (YB) area exhibit lower B0 values at all central frequencies showing the dominance of intrinsic absorption. Low values of Qc (high attenuation) are focused almost on all the frequencies along the Denali fault and YB, showing a strong influence of these structures on the attenuation. The results yield a comprehensive understanding of the unique attenuation characteristics of each region, underscoring the significance of investigating the behavior of seismic wave attenuation for seismic risk purposes.

Complex dispersion analysis of viscoelastic effects on elastic waves in three-dimensional single-phase metamaterials

In this paper, we study the propagation of elastic waves in three-dimensional single-phase metamaterials using the finite element method. Both elastic and viscoelastic scenarios are considered, where the Kelvin-Voigt model is used to describe the solid material viscosity. We explore the influence of material viscosity on the complex band diagrams and the transmission spectra in detail. It is found that the single-phase metamaterials support both the Bragg scattering and locally resonant band gaps. When a small viscosity is introduced, the wave attenuation within the locally resonant band gaps degrades. However, such a small viscosity has negligible effects on the Bragg scattering band gaps. As the material viscosity increases, the wave attenuation is mainly ascribed to the material viscosity rather than the band gap effects. Additionally, the attenuation behavior of evanescent waves can be accurately predicted from the imaginary part of wave vectors identified in the complex band structures. This work provides a reference for the practical applications of viscoelastic metamaterials.

Measurement Method of Stress in High-Voltage Cable Accessories Based on Ultrasonic Longitudinal Wave Attenuation.

High-voltage cables are the main arteries of urban power supply. Cable accessories are connecting components between different sections of cables or between cables and other electrical equipment. The stress in the cold shrink tube of cable accessories is a key parameter to ensure the stable operation of the power system. This paper attempts to explore a method for measuring the stress in the cold shrink tube of high-voltage cable accessories based on ultrasonic longitudinal wave attenuation. Firstly, a pulse ultrasonic longitudinal wave testing system based on FPGA is designed, where the ultrasonic sensor operates in a single-transmit, single-receive mode with a frequency of 3 MHz, a repetition frequency of 50 Hz, and a data acquisition and transmission frequency of 40 MHz. Then, through experiments and theoretical calculations, the transmission and attenuation characteristics of ultrasonic longitudinal waves in multi-layer elastic media are studied, revealing an exponential relationship between ultrasonic wave attenuation and the thickness of the cold shrink tube. Finally, by establishing a theoretical model of the radial stress of the cold shrink tube, using the thickness of the cold shrink tube as an intermediate variable, an effective measurement of the stress of the cold shrink tube was achieved.

Evaluation of 3D printed 316L stainless steel microstructure and mechanical property by laser ultrasonics

ABSTRACT In this paper, the laser ultrasonic non-destructive testing technology was used to detect the microstructure and mechanical properties of selective laser melting (SLM) 316 L stainless steel after post-treatment. The microstructure and mechanical properties of additively manufactured 316 L stainless steel were measured by Scanning electron microscopy (SEM), Electron backscatter diffraction (EBSD), tensile testing, etc. The laser ultrasonic longitudinal wave signal characteristic values were coupled with the microstructure and mechanical properties of SLM 316 L stainless steel. The results show that: The yield strength has a good correlation with wave speed and attenuation. With the increase of holding temperature and holding time, the grain size increases, the low angle grain boundary decreases, the yield strength gradually decreases from 409 MPa to 359 MPa, the wave velocity increases from 5579 m/s to 5700 m/s, and the frequency domain attenuation coefficient increases from 0.13 dB/mm to 0.16 dB/mm, the central frequency domain is about 10 MHz. The ultimate tensile strength is related to the frequency domain attenuation. The ultimate tensile strength decreases with the increase of the frequency domain attenuation coefficient. It can provide a reference for the evaluation of mechanical properties by laser ultrasonic testing.

Three-dimensional n-MoSe2/GOx (n= 1T, 1T' and 2H) microsphere: Phase-modulation strategy and microwave absorbing mechanism

MoSe2 was identified as a potential microwave absorber, whereas its practical application was predominantly affected by the ambiguous electromagnetic wave attenuation mechanism and dielectric properties. Here, we developed a novel phase assembly-modulating strategy to prepare n-MoSe2/GOx (n = 1T, 1T' and 2H) composites, wherein phase modulation of MoSe2 exerted a gainful effect on microwave absorption properties. The unique 1T′-MoSe2 phase was first explored in microwave absorption and composited with GOx to afford advanced conductivity loss and dielectric loss. The introduction of additional interface (2H/1T or 2H/1T') and abundant unsaturated defects promote multiple polarization, the semiconductor-metal mixed phase brought in a certain magnetic loss, optimizes the electron transfer ability and adjusts the impedance matching. Consequently, 1T′-MoSe2/GOx provides the minimum reflection loss (RLmin) of −52.08 dB and the effective absorption bandwidth (EAB, RL < -10 dB) of 5.3 GHz at 10 % filler content, which is approximately 9 times that of 2H–MoSe2/GOx and nearly 5 times that of 1T-MoSe2/GOx. This paper specifically explains the reasons for the phase modulation-induced magnetic losses and provides an effective phase modulation paradigm for developing advanced transition metal disulfide (such as MoS2, WS2 and WSe2) microwave absorbers.

Theoretical model for the elastic properties of cracked fluid-saturated rocks considering the crack connectivity

SUMMARY Cracks are a common rock microstructure and have a large effect on elastic properties during wave propagation. The fluid flow between a crack and its adjacent pore space can cause wave attenuation and dispersion. In this work, we introduce a crack connectivity parameter which is meant to improve the expression of local flow by weighting the contributions of fully connected and isolated cracks. We then update the analytical expression for frequency-dependent moduli by modifying the boundary conditions of the linearized Navier–Stokes equation and mass conservation equation. The proposed model contains the effect of cracks and stiff pores, in which the attenuation and dispersion are determined by squirt-flow and stiff-pore relaxations. The resulting model shows the squirt-flow relaxation frequency depends on not only the crack aspect ratio but also the crack connectivity. However, their contributions are different. The crack connectivity has little effect on the attenuation amplitude of shear modulus, but affects the attenuation amplitude of bulk modulus when multiple sets of cracks exist in the rock. The attenuation frequency band is also affected by the crack connectivity. As the crack connectivity deteriorates, the attenuation peak moves to low frequencies. In addition, by comparing the crack connectivity with the fluid viscosity coefficient, it is observed that the crack connectivity only affects the attenuation frequency band of cracks, whereas the fluid viscosity coefficient affects the attenuation frequency bands of cracks and stiff pores simultaneously. Thus, the introduction of crack connectivity is a supplement to the theoretical model of cracked fluid-saturated rocks. It helps understand the local fluid flow induced by seismic waves and provides a reasonable variation analysis of moduli and attenuation, especially for tight reservoirs.

Shear wave velocity in a functionally graded piezoelectric semiconductor plate clamped on a rigid base

Abstract This paper investigates the propagation of horizontally polarized shear waves in a Piezoelectric Semiconductor (PSC)&amp;#xD;layered structure. The modal consists of a pre-stressed PSC thin plate atop an elastic dielectric half-space joined&amp;#xD;perfectly at the interface. It is postulated that the material parameters and initial stress exhibit an exponential&amp;#xD;variation exclusively along the depth. The velocity equation of the considered wave is analytically obtained based&amp;#xD;on the traction-free boundary conditions. Numerical examples have been employed to examine the influences of&amp;#xD;several parameters, including semiconducting properties, material gradient index, initial stresses, external biasing&amp;#xD;electric field, and PSC film thickness, on the characteristics of the wave. Graphs have been generated to visualize&amp;#xD;the dependency of wave velocity and attenuation on these factors. The wave’s velocity and damping properties are&amp;#xD;significantly influenced by the thickness and steady state carrier density of the PSC plate. Besides yielding critical&amp;#xD;results, current findings are instrumental in designing high-frequency SAW devices.

Wave attenuation in a metamaterial beam with time delay control

Wave attenuation in a metamaterial beam with time delay control

Experimental and numerical study on explosion resistance of polyurea-coated shelter in petrochemical industry

To reduce the number of casualties in explosion accidents, blast-resistant shelters can be used to protect personnel in high-risk areas of petrochemical processing plants. In this work, the deformation behaviours of uncoated and polyurea-coated blast-resistant plates were studied through gas explosion tests. An ANSYS/LS-DYNA model of a polyurea-coated shelter was established, and the dynamic responses of the shelter under various explosion loads were analysed. A series of fuel–air explosion tests were carried out to investigate the explosion resistance of the full-scale shelter. The results showed that compared with the uncoated blast-resistant plate, the deformation of the polyurea-coated blast-resistant plate was significantly reduced. The overall deformation of the shelter was the central depression of the wall and the inward bending of the frame. The damage effect of a typical high-overpressure, low-duration load was greater than that of typical low-overpressure, long-duration load. The shelter remained intact under three repeated explosive loads, with cracks appearing on the inner wall but no collapse or debris splashing. The shock wave attenuation rate of the shelter reached over 90%, which could significantly reduce the number of indoor casualties.

The Role of Video Cameras and Emerging Technologies in Disaster Response to Increase Sustainability of Societies: Insights on the 2023 Türkiye–Syria Earthquake

New technologies are being used to facilitate the recognition process during and after earthquakes. These advanced tools are essential to keep track of what is left from of the destruction suffered by the built stock. Among the new technologies are video recordings captured during seismic events, footage from drones, and satellite imagery acquired before and after the event. This review paper presents a series of examples collected from the 2023 Türkiye–Syria earthquakes to illustrate how these new technologies offer a unique and efficient way to capture, document, and transfer information among experts in seismology, earthquake engineering, and disaster management. Whenever possible, these examples are accompanied by simple qualitative explanations to enhance understanding. To demonstrate the potential of video cameras and drone imagery for quantitative analysis, in addition to the various simple examples provided, two case studies are provided—one on road blockages, and another on intensity assessment and wave attenuation as observed in video cameras. These technologies are critical and merit considerable focus, particularly video cameras, which have not received much attention recently, on helping to understand seismic wave passage and their impact on the built environment. Enhancing our use of video cameras in this context can significantly contribute to the sustainability and resilience of our society. With the rapid advancement of image analysis, we advocate for a collaborative platform for accessing and utilizing imagery materials, aiding current and future generations in analysing the causes of such tragedies.

Finite deformation peridynamics shell theory: Application to mechanical metasurfaces

A finite deformation Simo-Reissner peridynamics (PD) shell theory is developed to investigate wave propagation and crack growth in shell structures. Simo-Reissner deformation approximation is utilized to derive the governing equations of the proposed theory from the three-dimensional PD equation. Deformation states for the PD shell theory are identified from the reduced stress power equation. Classical shell constitutive equations are seamlessly incorporated in PD framework by constitutive correspondence approach where a particular form of the classical reduced stress power expression suitable for constitutive correspondence is used. Rotation tensor is updated using an exponential map. A new bond breaking criterion is proposed for PD shell based on critical stretch and critical relative rotation. The solutions of the PD shell governing equations for quasi-static and dynamic cases are obtained through the Newton-Raphson method and the Newmark-beta method, respectively. Numerical simulations include finite deformation of cylindrical shell under both quasi-static and dynamic loading conditions. The PD shell model is validated against finite element solutions obtained using ANSYS®. Crack propagation through the cylindrical shell is simulated under quasi-static and dynamic loading. Wave propagation through cylindrical shell embedded with periodically arranged holes and cracks is investigated. Significant wave attenuation and large bandgap demonstrates the efficacy of the present proposal.

Acoustic wave propagation in depth-evolving sound-speed field using the lattice Boltzmann method

This study investigates the propagation of sound waves within deep-sea low-sound-speed channels using the lattice Boltzmann method, with a key focus on the influence of depth-dependent sound speed on wave propagation. The depth-variable sound speed condition is realized through the incorporation of an external force proportional to the density gradient. After the model verification, investigations into the two-dimensional spreading of sound sources reveal that the depth-dependent sound speed curves the wave propagation. When source depths differing from the low-sound-speed channel, wave paths deviate due to contrasting speeds above and below. When the sound source is situated within the low-sound-speed channel, waves exhibit converging patterns. The simulations also detail the total reflection behavior of sound waves. When the incident angle falls exceeds the critical angle, the waves remain intact within the low-sound-speed channel, thereby enabling the preservation of high amplitude acoustic signals even at remote locations. The subsequent simulations of sound wave propagation around obstacles demonstrate that the low-sound-speed channel also exhibits better signal transmission capabilities in the presence of obstacles. In a uniform sound speed environment, acoustic wave propagation around a submarine exhibits a symmetric pattern. By contrast, under depth-evolving speed conditions, submarines operating at various depths manifest distinct propagation characteristics, such as asymmetric wave propagation during shallow diving, as well as wave attenuation or even silencing when cruising within low-sound-speed channels. These findings underscore the profound implications of depth-evolving sound speed on underwater acoustic signal detection and transmission.

Dual-purpose wave farm with nonlinear stiffness mechanism for energy extraction and wave attenuation

Dual-purpose wave farm with nonlinear stiffness mechanism for energy extraction and wave attenuation

In vitro experimental study on interventional ultrasound-mediated microbubble cavitation lithotripsy

Abstract Ultrasound-mediated microbubble cavitation lithotripsy as a new minimally invasive approach has received great attention for the treatment of urinary stones. However, the attenuation of ultrasonic waves in human tissues and stone displacement during lithotripsy are two key issues limiting the development of this technology. In this paper, a method of interventional ultrasound-mediated microbubble cavitation lithotripsy is proposed, which can realize the in-situ delivery of ultrasonic waves and microbubbles. A piezoelectric ultrasound transducer with the center frequency of 461 kHz and output peak to peak acoustic pressures of 3.2 MPa is fabricated, and microbubbles with the concentration of 1.33×109/ml are synthesized. An extracorporeal experiment platform is built and in vitro tests of ultrasound mediated microbubble cavitation lithotripsy are conducted by using microbubbles with different concentrations and water. The results show that the proposed interventional ultrasound-mediated microbubble cavitation lithotripsy is an efficient method for the fragmentation of ureteral stones. The maximum mass reduction of the stone is 9.4 mg within 30 minutes of treatment under the combined action of ultrasound with the peak-negative pressure of 1.6 MPa and center frequency of 461 kHz and microbubbles with the concentration of 3.325×107/ml. The research results will provide a technical basis for further optimization of subsequent tentative schemes, in vivo experiments with animals and future clinical applications.

Numerical study on the polarity change process during internal wave shoaling

Polarity change is an important mechanism for internal waves shoaling. In this study, a numerical model for simulating the real-scale internal wave passing over slope-shelf topography is established based on the Fourier pseudo-spectral method and weakly nonlinear theory. By numerical simulation, the effects of shelf height, initial wave amplitude, and inclination angle on the waveform characteristics and energy properties of the internal wave during its shoaling are investigated. In the polarity change process, the initial internal wave converts into a depression wave and a generated elevation wave behind it. The distance between the peak of the elevation wave and the trough of the depression wave is a key feature to describe the polarity change. In terms of energy properties, the energy ratio of depression and generated elevation waves compared with the initial wave as well as their relative magnitude is mainly determined by the shelf height. In addition, the initial wave amplitude also affects the generation of the elevation wave and the attenuation of the depression wave to a certain extent. The increase in the inclination angle hinders the formation of the elevation wave but has little effect on the depression wave energy.

Analysis of train-induced aerodynamic characteristics and pressure-relief measures relating to fully enclosed noise barriers installed on railway bridges

Fully enclosed noise barriers (FENBs) are increasingly being installed on high-speed railway bridges for noise pollution control. However, the aerodynamic effects of high-speed trains passing FENBs have an adverse impact on barrier durability and generate micro-pressure waves. In this paper, a numerical model of a train passing an FENB on a bridge is established. The aerodynamic pressure distribution along the FENB is analyzed for both a single train and two trains passing one another. The propagation characteristics and evolution mechanisms of pressure waves are then investigated. The results show that the pressure is lower at the ends of the FENB and higher in the middle along the direction of train travel. The peak positive and negative pressures at the mid-span are 1.95 and 4.47 times higher than those at the ends, respectively. This distribution is caused by the propagation, superposition, reflection, and attenuation of pressure waves. Compression waves account for 78.9% of the peak positive pressure. An amplification factor must be considered when estimating the impact of two trains passing one another. Analysis of five pressure-relief schemes shows that arranging a single pressure-relief hole at a high-pressure location effectively alleviates the over-pressure in the FENB. The overall pressure-relief effect is an exponential function of the single opening area. Considering a constant opening area, arranging several relief holes at equal spacing optimizes the adverse pressure distribution compared with the single-hole relief scheme. The equivalent forces of the multi-hole scheme are 3.35% and 7.58% lower than in the single-hole scheme.

Simulation study of Rayleigh wave inspection of subsurface white etching crack in bearing rollers

Abstract Rolling bearings are widely used in wind energy and electric vehicle industries. One of the premature failure mode due to the contact fatigue is White Etching Crack (WEC) in the subsurface. WEC occurs preferentially in the Hertzian contact region of bearings, preferentially around multi-phase inclusions containing aluminium, manganese, and sulfur. The formation process undergoes intense plastic deformation and recrystallization. Most of WECs are 100~300 μm below the contact surface in a butterfly shape. Its principal axis is 30°~50° to the rolling direction. Since the sample preparation is difficult, this simulation study enables to better understand the interaction between WEC and ultrasonic waves for a better measurement system design. Rayleigh surface wave penetrates to a depth of about an order of magnitude of one wavelength. Its energy is concentrated near the surface containing rich WEC information. The Rayleigh wave propagation process is first analyzed based on the grain scale model established. Then the immersion inspection of WEC is simulated based on the finite element method at 15 MHz in order to compromise between the detection accuracy and defect depth. Finally, by analyzing the time and frequency domain information of the scattered signals, the quantitative relationships between crack characteristics (depth, length and tilt angle) and those of Rayleigh waves (amplitude and attenuation) can be obtained. This study paves the way for the quantitatively characterization of WEC in bearing rollers with surface integrity evaluation possibility at early stage.

The Low-Attenuation Endfire Leaky-Wave State on an Optically Transparent Lossy Film

The development of high-performance optically transparent radio frequency (RF) radiators is limited by the intrinsic loss issue of transparent conductive films (TCFs). Instead of pursuing expensive endeavors to improve the TCFs’ electrical properties, this study introduces an innovative approach that leverages leaky-wave mode manipulation to mitigate the TCFs’ attenuating effect and maximize the RF radiation. Our finding reveals that the precise control of the mode confinement on glass-coated TCFs can create a low-attenuation window for leaky-wave propagation, where the total attenuation caused by TCF dissipation and wave leakage is effectively reduced. The observed low-attenuation leaky-wave state on lossy TCFs originates from the delicate balance between wave leakage and TCF dissipation, attained at a particular glass cladding thickness. By leveraging the substantially extended radiation aperture achieved under suppressed wave attenuation, this study develops an optically transparent antenna with an enhanced endfire realized gain exceeding 15 dBi and a radiation efficiency of 66%, which is validated to offer competitive transmission performance for advancing ubiquitous wireless communication and sensing applications.

Conditions for sound absorption caused by longitudinal vibration of lightweight powder

It has been reported that powder layers composed of powder materials with a grain diameter of several tens of micrometers exhibit significant sound absorption capabilities in the low-frequency range when the bulk powder density is low. In a previous study, a model considered factors like “powder vibration” and “sound wave attenuation due to gaps between powders.” The remaining challenge lies in the unknown conditions under which a powder with a high sound absorption coefficient is formed through the attenuation of acoustic energy due to the longitudinal vibrations of the powder. In this study, we aimed to estimate these conditions based on the grain size and bulk density. The relationship between the “areal density per grain layer,” expressed as “grain diameter X bulk density,” and the first-order sound absorption peak value revealed that the sound absorption coefficient increases as the areal density per grain layer decreases.