Metal Atoms Research Articles

Efficient degradation of tetracycline by cobalt ferrite modified alkaline solution nanofibrous Ti3C2Tx MXene activated peroxymonosulfate system: Mechanism analysis and pathway

Magnetic CoFe2O4 nanoparticles have received considerable attention as an activator for peroxymonosulfate (PMS) in the degradation of tetracycline. However, it is still challenging to construct CoFe2O4 composites with good dispersion and highly exposed reactive sites. Herein, the KOH fiber-functionalized MXene matrix decorated by cobalt ferrite nanoparticles (denoted as CoFe2O4@Alk-MXene) was developed by electrostatic self-assembly method. The layered fibrotic structure effectively disperses and fixes cobalt ferrite nanoparticles, increasing the exposure of reactive sites. The as-prepared CoFe2O4@Alk-MXene material exhibited rapid removal of 100% tetracycline hydrochloride (TC-HCl) within 10 minutes by activating PMS, leveraging the excellent conductivity of alkalized MXene and the efficient activation of transition metal atoms. The experimental and theoretical analysis revealed that the electron transfer process of Ti2+/Ti4+, Co2+/Co3+ and Fe3+/Fe2+, as well as the free radical and non-free radical attack behaviors produced by the adsorption of PMS by the composite, are the primary mechanisms for achieving rapid removal of pollutants. A comprehensive degradation mechanism and potential pathways were proposed based on these findings. Overall, CoFe2O4@Alk-MXene/PMS emerges as a promising catalytic system for TC removal.

Metal-enhanced carbon-nitrogen material for selective detection of hazardous gases: Insights from interface electronic states

In this study, utilizing density functional theory, the C3N1 monolayer modified by Ir, Pd, Pt, and Rh atoms (Ir/Pd/Pt/Rh-C2N1) was chosen for selective adsorption of C2H2 amidst multiple gases (H2O, C2H2, and C4H10O2). According to the results of cohesive energy and ab initio molecular dynamics simulations, it is indicated that precious metal atoms can be stably anchored on the monolayer while enhancing the conductivity of the material The analysis of the electrostatic potential and work function determined the highly active sites and electron release capacity. In addition, the adsorption energy and distance disclosed the gas-solid interface structure of multiple gases on the Ir/Pd/Pt/Rh-C2N1 monolayer. Importantly, C2H2 exhibits strong responses to p-type semiconductor Pt-C2N1 and n-type semiconductor Ir-C2N1, respectively. Crystal Orbital Hamilton Population reveals the difference in adsorption energy due to modifications involving four precious metals. Interestingly, for the first time, the density of states calculation reveals that under the coexistence of multiple gases, the Pt/Ir-C2N1 monolayer effectively eliminates the interference of other gases and has a unique response only to C2H2. In real situations, with the basis of Gibbs free energy and Einstein's law of diffusion, it was determined that Pt-C2N1 and Ir-C2N1 showed excellent hydrophobicity, a wider temperature range, and a low diffusion activation energy barrier. In summary, Pt-C2N1 and Ir-C2N1 detect C2H2 without interference, maintaining fundamental principles, responsiveness, stability, and versatility unaffected by external factors.

Iron nanoparticles enhance the efficiency of single-atom Fenton-like catalyst by boosting Fe-NX activity

Single-atom catalysts (SACs) have been widely employed for the removal of organic contaminants via advanced oxidation processes (AOPs). The underlying principle involves central metal atoms that interact synergistically with surrounding atoms in specific ensembles to adsorb reactants and facilitate catalytic reactions. However, comprehensive studies exploring the ensemble effect of SACs in combination with metal nanoparticles relatively rare. In this study, we have synthesized a highly active iron single-atom catalyst (Fe@BC), which features both Fe-Nx coordination sites and iron nanoparticles. Fe@BC exhibits remarkable adsorption and degradation capabilities for bisphenol A across a wide pH range from 3.0 to 11.0. Scavenging experiments coupled with electron paramagnetic resonance analysis have revealed that •OH and O2•− are the key reactive oxygen species within the Fe@BC/PAA system, with •OH playing a crucial role in the removal of bisphenol A (BPA). Our comprehensive characterization analysis has validated the simultaneous presence of Fe nanoparticles and Fe-Nx sites, which are crucial for the catalyst's high activity. Furthermore, our experimental data highlight the importance of the synergistic effect between these two components. Density Functional Theory calculations have provided additional insights, showing that the presence of iron nanoparticles significantly boosts the Fe-Nx sites' activity. This enhancement is achieved by increasing adsorption energy, promoting electron transfer to peracetic acid (PAA), and decreasing the energy barrier for the formation of active species. These findings are vital for the strategic refinement of Fe single-atom catalysts for PAA-based advanced oxidation processes.

Hybrid Quantum Mechanical, Molecular Mechanical, and Machine Learning Potential for Computing Aqueous-Phase Adsorption Free Energies on Metal Surfaces.

Performing reliable computer simulations of elementary processes occurring at metal-water interfaces is pivotal for novel catalyst design in sustainable energy applications. Computational catalyst design hinges on the ability to reliably and efficiently compute the potential energy surface (PES) of the system. Due to the large system sizes needed for studying processes at liquid water-metal interfaces, these systems can currently not be described using density functional theory (DFT). In this work, we used a hybrid quantum mechanical, molecular mechanical, and machine learning potential for studying the adsorption behavior of phenol, atomic hydrogen, 2-butanol, and 2-butanone on the (0001) facet of Ru under reducing conditions when Ru is not oxidized. Specifically, we describe the adsorbate and the surrounding metal atoms at the DFT level of theory. Here, we also considered the electrostatic field effect of the water molecules on adsorbate-metal interactions. Next, for the water-water and water-adsorbate interactions, we used established classical force fields. Finally, for the water-Ru surface interaction, for which no reliable force fields have been published, we used Behler-Parrinello high-dimensional neural network potentials (HDNNPs). Employing this setup, we used our explicit solvation for metal surface (eSMS) approach to compute the aqueous-phase effect on the low-coverage adsorption of selected molecules and atoms on the (0001) facet of Ru. In agreement with previous experimental and computational studies of oxygenated molecules over transition metal facets, we found that liquid water destabilizes the tested adsorbates on Ru(0001). Interestingly, our findings indicate that adsorbates on Ru are less affected by the presence of an aqueous phase than on other transition metals (e.g., Pt), highlighting the necessity of experimental investigations of Ru-based catalytic systems in liquid water.

A Class of Heptaphyrins with NIR Absorption Modulated by Metal Coordination and Nucleophilic Substitution.

The intensive interest in expanded porphyrins can be attributed to their appealing photoelectric and coordination behavior. In this work, an N-confused heptaphyrin 1 was synthesized by an acid-catalyzed [3+4] condensation reaction. The introduction of an N-confused pyrrolic unit into the heptaphyrin macrocycle led to the formation of a figure-eight-like conformation with nonsymmetrical "NNNN" and "NNNC" coordination cavities employable for bimetallic coordination. As a result, chelation of 1 with Zn(II) and Cu(II) afforded mono-Zn(II) complex 2 and bis-Cu(II) complex 3, respectively, with the metal atoms exhibiting distorted square-planar geometries. In complex 3, an oxygen atom is attached to the α-C atom of N-confused pyrrole D, and thus the N and C atoms of ring D participate in coordination within the two cavities. Interestingly, treatment of 1 with Cs2CO3 in MeOH resulted in regioselective substitution of all the seven para-F atoms in the meso-C6F5 groups as well as the α-H of ring D by eight methoxy moieties. Complex 3 displays a red-shifted absorption band edge of ca. 2200 nm, compared to that of ca. 1600 nm observed for 1. This work provides an example of incorporating an N-confused pyrrole to construct expanded porphyrins with distinctive coordination behavior and tunable NIR absorption.

Alloying and Segregation in PdRe/Al2O3 Bimetallic Catalysts for Selective Hydrogenation of Furfural

X-ray absorption fine structure (XAFS) spectroscopy, temperature-programmed reduction (TPR), and temperature-programmed hydride decomposition (TPHD) were employed to elucidate the structures of a series of PdRe/Al2O3 bimetallic catalysts for the selective hydrogenation of furfural. TPR evidenced low-temperature Re reduction in the bimetallic catalysts consistent of the migration of [ReO4]− (perrhenate) species to hydrogen-covered Pd nanoparticles on highly hydroxylated γ-Al2O3. TPHD revealed a strong suppression of β-PdHx formation in the reduced catalysts prepared by (i) co-impregnation and (ii) [HReO4] impregnation of the reduced Pd/Al2O3, indicating the formation of Pd-rich alloy nanoparticles; however, reduced catalysts prepared by (iii) [Pd(NH3)4]2+ impregnation of calcined Re/Al2O3 and subsequent re-calcination did not. Re LIII X-ray absorption edge shifts were used to determine the average Re oxidation states after reduction at 400 °C. XAFS spectroscopy and high-angle annular dark field (HAADF)-scanning transmission electron microscopy (STEM) revealed that a reduced 5 wt.% Re/Al2O3 catalyst contained small Re clusters and nanoparticles comprising Re atoms in low positive oxidation states (~1.5+) and incompletely reduced Re species (primarily Re4+). XAFS spectroscopy of the bimetallic catalysts evidenced Pd-Re bonding consistent with Pd-rich alloy formation. The Pd and Re total first-shell coordination numbers suggest that either Re is segregated to the surface (and Pd to the core) of alloy nanoparticles and/or segregated Pd nanoparticles are larger than Re nanoparticles (or clusters). The Cowley short-range order parameters are strongly positive indicating a high degree of heterogeneity (clustering or segregation of metal atoms) in these bimetallic catalysts. Catalysts prepared using the Pd(NH3)4[ReO4]2 double complex salt (DCS) exhibit greater Pd-Re intermixing but remain heterogeneous on the atomic scale.

Catalytic Conversion of NO and CO by Noble-Metal-Free Copper-Vanadium Oxide Cluster Anions CuVO3,4.

Herein, by using state-of-the-art mass spectrometry, we demonstrated experimentally that the bimetallic copper-vanadium oxide cluster anions CuVO3,4- can catalyze the reduction of NO by CO into N2O and CO2. Note that the catalysis of NO reduction by CO has been rarely established in the gas phase and noble-metal containing clusters were commonly emphasized. Benefiting from quantum-chemical calculations, the Cu-V synergistic effect that both metal atoms work energetically to favor NO adsorption, N-N coupling, and CO oxidation by facilitating electron transfer can be understood at a strictly molecular level. Theoretical results demonstrated that the precaptured NO molecule encourages the adsorption of the second NO by electron donation. This finding deepens our understanding on NO reduction that NO functions not only as a reactant but also as a promoter during the reactions. This discovery could be helpful to permeate the nature and mechanism of active sites on related copper-vanadium heterogeneous catalyst used in real-life NO reduction.

Performance improvement of ZnO quantum dot-based white light-emitting diodes enabled by an insulating passivation interlayer

In this work, solution-processed white quantum dot light-emitting diodes (WQLEDs) were demonstrated by using the zinc oxide quantum dots (ZnO-QDs) as both a white fluorescent emitter as well as an effective electron injection layer. Meanwhile, a thin insulating passivation layer of polystyrene (PS) was inserted between the ZnO-QDs layer and aluminum cathode to optimize the electron injection into the device and reduce the non-radiative recombination at the interface between ZnO-QDs layer and cathode. Our findings reveal that strategically incorporating a thin PS insulating passivation interlayer between the ZnO-QDs and the aluminum cathode effectively reduces the surface defects of the ZnO-QDs as well as the infiltration of metal atoms into the ZnO-QD layer. Consequently, the WQLEDs with such an insulating PS interlayer exhibit a high brightness of 1076 cd/m2, showing a great improvement of∼40 % compared with that of WQLEDs without PS passivation interlayer (780 cd/m2). This work provides an efficient method to realize single component WQLEDs, thus bringing a feasible solution for next-generation solid-state lighting technologies.

Theoretical study of adsorption of gas (CO, CO2, NH3) by metal (Au, Ag, Cu)-doped single-layer WS2.

The adsorptions of gas (CO, CO2, NH3) by metal (Au, Ag, Cu)-doped single layer WS2 are studied by density functional theory. The doping of metal atoms makes WS2 behave as n-type semiconductors. The final adsorption sites for CO, CO2, and NH3 are close to the atomic sites of the doped metal. The adsorptions of CO and NH3 gases on Cu/WS2, Ag/WS2, and Au/WS2 are dominated by chemisorption. The doped metal atoms enhance the hybridization of the substrate with the gas molecular orbitals, which contributes to the charge transfer and enhances the adsorption of the gas with the material surface. The adsorptions of CO and NH3 on Cu/WS2 and Ag/WS2 allow favorable desorption in a short time after heating. The single-layer Cu/WS2 is proved to have the potential to be used as a reliable recyclable sensor for CO. This work provides a theoretical basis for developing high-performance WS2-based gas sensors. In this paper, the adsorption energy, electronic structure, charge transfer, and recovery time of CO, CO2, and NH3 in the doped system have been investigated based on the CASTEP code of density functional theory. The exchange correlation function used is the Perdew-Burke-Ernzerhof (PBE) generalized gradient approximation (GGA). The TS (Tkatchenko-Scheffler) dispersion correction method was used to involve the effects of van der Waals interaction on the adsorption energies for all adsorption system. The ultrasoft pseudopotentials are chosen and the plane-wave cut-off energies are set to 500eV. The k-point mesh generated by the Monkhorst package scheme is used to perform the numerical integration of the Brillouin zone and 5 × 5 × 1k-point grid is used. The tolerances of total energy convergence, maximum ionic force, ionic displacement, and stress component are 1.0 × 10-5eV/atom, 0.03eV/Å, 0.001Å, and 0.05 GPa, respectively.

Atomic Phosphorus Sites for Anchoring Platinum–Tungsten Dimers to Facilitate Proton Transfer in All‐pH Hydrogen Evolution

AbstractBimetallic single‐atom‐dimer (SAD) with unique electronic structures and adsorption properties presents exceptional catalytic performance owing to atomic‐level synergistic effects from direct bonding between different metal atoms. However, inherent characteristics of substrate present great challenges in their synthesis and mechanism investigation. Herein, a unique phosphorus modified atomic layer deposition (P‐ALD) strategy is designed to synthesize P‐anchored Pt–W dimers, overcoming substrate limitation (Pt1W1–P/C). Motivated introduction of atomic P site via ALD can effectively anchor one‐to‐one AB bimetallic dimer structure on various substrates, confirmed by X‐ray absorption spectroscopy (XAS). Density functional theory reveals an interatomic synergistic adsorption mechanism, with W as primary hydrogen adsorption site extending to Pt, optimizing hydrogen coverage, leading to 60‐fold increase in mass activity compared to commercial Pt/C in both acidic and alkaline electrolytes. Anion exchange membrane water electrolyzer with ultra‐low loading Pt1W1–P/C (50 µgPt cm−2) catalyst operates durability at 1000 mA cm−2 for 550 h with ultra‐low degradation of 38 µV h−1. Operando XAS confirms hydrogen adsorption pathway between atoms and remarkable self‐healing ability of P–Pt–W–O sites under all‐pH conditions. These findings extend the application domain of SAD to catalytic manufacturing methods and aid in designing advanced materials with multi‐atomic active sites.

Full spin polarization and pure spin current produced by the photogalvanic effect in penta-PdN2 photodetector

The photogalvanic effects (PGEs) in low-dimensional devices were thought to be an important mechanism to generate pure spin current which was a essential problem in spintronics. Herein, based on non-equilibrium Green’s function combined with density functional theory, we studied linear and elliptical spin dependent PGEs in the photodetector based on the penta-PdN2 monolayer at zero bias. Due to spin-orbit coupling originating from the heavy metal atoms Pd and low symmetry of C2v for the pristine case and Cs for the defect cases, the penta-PdN2 photodetector at pristine, vacancy and substitution-doping situations can produce robust spin dependent PGEs, and the import of defects were able to strengthen the linear and elliptical PGEs, respectively. More importantly, on account of enormous splitting of the DOS for the pristine, Pd-vacancy, N2-vacancy and NN-vacancy cases, spin up and spin down photocurrents accordingly formed spin splitting, which eventually led to full spin polarization and then pure spin currents in the penta-PdN2 photodetector. PdSe2 monolayer has been compounded in experiments, so structurally similar penta-PdN2 monolayer possesses highly possible to be prepared. Therefore, if the penta-PdN2 photodetector can be successful assembled, the spin-generator will be reality, even no need to be doped because the pristine penta-PdN2 photodetector can give rise to pure spin currents. In addtion, the penta-PdN2 photodetector at different situations are highly polarization sensitive. In conclude, our work suggested great potential applications of the penta-PdN2 monolayer on PGE-driven low energy-consumption photodetectors and spin-generators in optoelectronics and spintronics.

Calcium single atoms stabilized by nitrogen coordination in metal–organic frameworks as efficient solid base catalysts

Considerable attention has been paid to the preparation of single-atom solid base catalysts (SASBCs) owing to their high activity and maximized utilization of basic sites. At present, the reported fabrication methods of SASBCs, such as two-step reduction strategy and sublimation capture strategy, require high temperature. Such a high activation temperature is easy to cause the sublimation loss of alkali or alkaline earth metal atoms and destructive to the support structure. Herein, a new SASBC, Ca1/UiO-67-BPY, is fabricated, in which the alkaline earth metal Ca sites are immobilized onto N-rich metal–organic framework UiO-67-BPY at room temperature. The results show that the atomic configuration of Ca single atoms is coordinated by two N atoms in the framework. The obtained Ca SASBC possesses ordered structure and exhibits high product yield of 87.2% in the Knoevenagel reaction between benzaldehyde and malononitrile. Furthermore, thanks to the Ca single atoms sites anchored on UiO-67-BPY, the Ca1/UiO-67-BPY catalyst also shows good stability during cycles. This work might offer new insight in designing SASBCs for different base-catalyzed reactions.

DFT Modeling of Polyethylene Chains Cross-linked by Selected ns1 and ns2 Metal Atoms.

We analyze the structures, stabilities, and thermochemical properties of polyethylene (PE) oligomer chains cross-linked by metal (M) atoms through C-M-C bonds. Representative PEn-Mm-PEn complexes contain between 7 and 15 carbon atoms in each oligomer and one to three Li, Be, Mg, Zn, Ag, or Au cross-linking metal elements. PEn-Mm-PEn complexes are quasiplanar with nearly parallel PE chains. Their stability is determined by covalent C-M-C bonds accompanied by noncovalent dispersion interactions between PEn chains. Using the CAM-B3LYP+D3BJ+ABC functional, the binding energies of PE15-M-PE15 with respect to two PE15 radicals and metal fragments are -225, -230, -322, -551, -289, and -303 kJ/mol for Li, Ag, Au, Be, Mg, and Zn atoms, respectively. Entropy contributions (109 to 121 kJ/mol at 298.15 K) destabilize all complexes significantly. With two cross-linking metal elements in PE15-M2-PE15 complexes, binding energies are about double. Complexes with several open-shell Li, Ag, or Au doublet atoms have spins located on separated C-M-C bonds. High-spin PE15-Mm1-PE15-Mm2-PE15 complexes of three PE oligomers cross-linked by up to five doublet metal atoms create parallel PE tubes, which are suggested as elementary cells for modeling magnetic polymer tubes.

Fabrication of bio-inorganic metal nanoparticles by low-cost lychee extract for wastewater remediation: a mini-review.

This review article gives an overview of the biogenic synthesis of metal nanoparticles (mNPs) while using Litchi chinensis extract as a reducing and stabilizing agent. The subtropical fruit tree i.e lychee contains phytochemicals such as flavonoids, terpenoids, and polyphenolic compounds which act as reducing agents and convert the metal ions into metal atoms that coagulate to form mNPs. Different methodologies adopted for the synthesis of lychee extract and its use in the fabrication of mNPs under different reaction conditions such as solvent, extract amount, temperature, and pH of the medium have also been discussed critically in detail. Different techniques such as FTIR, UV-visible, XRD, SEM, EDX, and TEM adopted for the analysis of biogenic synthesis of mNPs have also been discussed in detail. Applications of mNPs: Applications of these prepared mNPs in various fields due to their antimicrobial, antiinflammatory, anticancer, and catalytic activities have also been described in detail.

Deciphering the evolution of electronic and magnetic properties in alkali doped nickel oxide: An In-silico approach

In this study, we employed the DFT+U method to systematically explore the electronic, and magnetic properties of nickel oxide doped with alkali metal atoms (Li, Na, K). The Hubbard potential-U was judiciously applied to all doped compound resulting from alkali doping, and were found to exhibited half-metallic properties. A noteworthy observation was the half-metallic band gap in the spin-down channel, which exhibited a linear variation with the increasing value of the Hubbard potential. Furthermore, the total magnetic moment was discernible in the supercells, with all supercells demonstrating 100% spin polarization at the Fermi level. Consequently, the findings from this study hold significant potential for applications in spintronics, thereby paving the way for future research in this domain.

Copper restructured transition metal/metal oxide heterostructure with a hierarchical nanostructure for accelerated water dissociation kinetics and alkaline hydrogen evolution

The slow kinetics of water dissociation on electrocatalysts lacking platinum hinders the advancement of cost-effective hydrogen production via alkaline water electrolysis. Herein, a hierarchically peach-flower-shaped electrocatalyst consisting of copper-restructured cobalt–nickel/cobalt–nickel oxide heterostructure anchored on copper nanowires (Cu-CoNiO/CoNi@Cu NWs) is developed for efficient hydrogen evolution reaction (HER). Benefiting from the optimized electronic configuration and geometric structure, this Cu-CoNiO/CoNi@Cu NWs catalyst performs an outstanding alkaline HER activity of 29 mV at 10 mA cm−2 and 98 mV at 100 mA cm−2, which is comparable with the state-of-the-art Pt/C catalyst (26 mV at 10 mA cm−2 and 117 mV at 100 mA cm−2). Our findings rank among the topmost catalytic efficiencies when compared to all previously reported non-noble metal catalysts and numerous noble metal catalysts. The combined experimental exploration and theoretical studies reveal that the incorporation of Cu dopant into CoNiO/CoNi heterostructure enhances electron transfer from metal atoms to O atom, leading to the formation of the polarized electric field to accelerate water dissociation and H evolution, eventually facilitating the overall alkaline HER process. The boosted electron exchange and mass transportation deriving from the introduction of Cu NWs and hierarchically peach-flower-shaped nanostructure further reinforce the HER activity of the Cu-CoNiO/CoNi catalyst.

DFT modeling of reaction of H2 with O2 pre-adsorbed on In2O3(011) surface

The DFT approach is used for the first time to model the reaction of hydrogen with oxygen molecule adsorbed on the defective surface of In2O3(011). This reaction is crucial for hydrogen detection by In2O3 sensor. The activation energies are calculated using two mechanisms involving the formation of both an adsorbed water molecule and hydroxyl groups on the In2O3(011) surface. One hydroxyl group is formed due to the bonding of OH with the surface metal atom, and the other due to the bonding of hydrogen with oxygen of the lattice. Both reactions are characterized by the presence of a potential barrier and are exothermic. The activation energies of the two reactions are calculated by the climbing-image nudged elastic band method to be 0.99 eV and 0.98 eV. The results of the calculations are compared with available experimental data. It is also shown that the presence of a surface neutral oxygen vacancy leads to the formation of a vacancy state below the Fermi level, and the electron density is concentrated on the fourfold coordinated indium atom.

Mining Knowledge from Crystal Structures of Homoleptic Complexes: Oxidation States of Metal Atoms

Mining Knowledge from Crystal Structures of Homoleptic Complexes: Oxidation States of Metal Atoms

Synthesis, structural elucidation, and antibacterial activities of novel copper(II), cobalt(II), and nickel(II) complexes with a bidentate Schiff base ligand against pathogenic bacteria

Novel Schiff base metal complexes diaqua(4-chloro-2-{[(4-(dimethylamino)phenyl)methylene]amino}phenolato)M(II) ion, (M = copper/cobalt/nickel) have been synthesized using the ligand 4-chloro-2-((4-(dimethylamino)benzylidene)amino)phenol, which was prepared by reacting 2-amino-4-chlorophenol with 4-(dimethylamino)benzaldehyde in a molar ratio of 1:1. The synthesized compounds were characterized based on elemental analysis, FTIR, UV–vis., 1H and 13C NMR, powder XRD, mass spectrometry and magnetic studies. Spectroscopic investigations demonstrated that the metal atom coordinates to a bidentate Schiff base ligand via the azomethine nitrogen and phenolic oxygen. The appropriate molecular geometry for each metal complex has been proposed through the analysis of spectroscopic and analytical data, Specifically, tetrahedral geometry has been proposed for Co(II), Ni(II), and square planar geometry for Cu(II) complex. Theoretical calculations employing Density Functional Theory (DFT) validated the experimental results, elucidating optimized geometries, frontier molecular orbitals, natural bond orbital distributions, molecular electrostatic potentials, non-linear optical properties, IR vibrational modes, and UV absorbance profiles. Additionally, the compounds' biological efficacy was validated through molecular docking against receptors for Gram(+ve) bacteria, Bacillus subtilis (PDB ID: 5H67), Staphylococcus aureus (PDB ID: 3TY7) and Gram(-ve) bacteria, Escherichia coli (PDB ID: 3T88), Proteus vulgaris (PDB ID: 5I39). The outcome revealed that Co(II) complex exhibited highest binding energy with Escherichia coli and Bacillus subtilis while the ligand with Proteus vulgaris (5I39) and Staphylococcus aureus (3TY7). Further the study was extended to the MD Simulation in water for 100 ns to evaluate the binding affinities and its stabilities by analyzing the deviation, fluctuations, and intermolecular interactions. The research presented here showcase the potential of employing a Schiff base ligand and its Co(II) complex in the synthesis of novel, highly potent antibacterial agents to combat emerging diseases, which holds considerable importance in the field of pharmaceutical science—however, in-vitro studies are needed to validate the results.

Synthesis, characterization and investigation of biological activities of Schiff base and its Ni(II) complex obtained from 2-Benzoylpyridine and 3-Hydroxy-2-naphthoic hydrazide

In this paper, a new aryl hydrazone and its Nickel (II) complex were synthesized from 2-benzoylpyridine and 3-Hydroxy-2-naphthoic hydrazide. The synthesized compounds were characterized by elemental analysis, UV Vis., IR, NMR spectral studies and mass spectra. The data indicate that the metal atom is coordinated by the two ligands and that the [NiL2] complex is octahedral. The ligand is coordinated through carbonyl-O, azomethine-N, and pyridyl-N atoms. When tested against various reference bacterial strains and clinical isolates, it was discovered that the antibacterial activity of the [NiL2] complex was more effective than the ligand.