Arabian Plate Research Articles

Eocene contractional deformation in the NW corner of the Arabian plate and its relation to Arabia-Eurasia collision in SE Türkiye

ABSTRACT Field evidence indicates c. 40 Ma (Early-Middle Eocene) contractional deformation in the S Amanos Mountains. Following latest Cretaceous southward ophiolite emplacement, an intra-platform basin infilled with shallow to deeper marine, dominantly carbonate sediments. Localized thrusting, reverse faulting, and folding were followed by subaerial erosion and non-marine clastic deposition, sealed by an Early Miocene marine transgression. Eocene emergence elsewhere in SE Türkiye probably also resulted from regional crustal shortening. Alternative hypotheses for collision in SE Türkiye propose latest Cretaceous, Mid-Late Eocene, Early Miocene, or Late Miocene suturing of S Neotethys. Much geological evidence in SE Türkiye and NW Iran supports Mid-Late Eocene initial continent-continent collision. Plate reconstructions suggest S Neotethys survived in this region until the Mid-Late Eocene. Biogeographical evidence points to minor Eocene mammal migration across S Neotethys, followed by Early Miocene large-scale terrestrial migrations. Seawater isotopic data suggest a major decrease in inter-Indian Ocean-Mediterranean Sea current flow during the Early Miocene. Instrumental geophysics and both numerical and analogue modelling suggest that the northern Arabian platform underthrust Eurasia (>200 km in S central Iran). In SE Türkiye, Eocene initial ‘soft’ collision was followed by Early Miocene ‘hard collision’, with crustal thickening and exhumation continuing until the Late Miocene, followed by westward ‘tectonic escape’.

Novel insights to unconventional carbonate mudstone reservoir with quantitative nanoporosity characterization and modeling of Tuwaiq Mountain Formation

Organic-rich carbonate mudstones have emerged as a significant unconventional play globally, particularly the Middle Jurassic carbonate mudstones of the Arabian plate. Despite their importance, these mudstones are highly heterogeneous, composed of organic-lean and organic-rich deposits, and often exhibit similar reservoir quality, making them challenging to characterize. While most studies have attributed the reservoir quality of these mudstones to the organic-related pores, little attention has been paid to the origin of the pore structure and network of the organic-lean counterparts. To address these issues, we performed high-resolution quantitative pore characterization and modeling by coupling micro-computed tomography and focused ion beam scanning electron microscopy to gain insight into the matrix-related pore structure, size, and networks on the organic-lean mudstones. Our study showed that in the organic-lean mudstones micropores are present but isolated, while the nanoscale pore structure appears to be well-connected, hence higher permeability. The pore-network model result has a median pore radius of 189–226 nm and a median throat radius of 91–112 nm, rarely exceeding 1000 nm and 500 nm, respectively. The frequency plots demonstrate positively skewed distributions indicating that large pores and throats are anomalous. Our study highlights that the organic-lean mudstone nanoscale pores are comparable to previously reported nanopores in the organic-rich zone and other mudstone plays around the globe. It emphasizes coexisting organic and matrix-related nanopores, suggesting the significance of matrix-bound nanopores' influence on carbonate mudstones unconventional play. The findings can enhance our understanding of the nano-scale pore structure and provide insights to evaluate and build development strategies of carbonate mudstones in the Arabian Intrashelf Basin and elsewhere.

Deflected Mantle Flow and Shearing‐Aligned Lithospheric Melt Under the Strike‐Slip Dead Sea Rift

AbstractContinental rifting is one of the fundamental tectonics of the Earth evolution while our current understandings on the dynamic mechanism of the strike‐slip ones are relatively limited. Here, we have utilized three kinds of core‐refracted shear waves (including PKS, SKKS, and SKS) and employed the shear‐wave splitting technique to systematically investigate the azimuthal anisotropy of the upper mantle under the typical strike‐slip Dead Sea rift. There are a total of 1,855 well‐determined anisotropic measurements from 187 stations with dominantly N‐S fast orientations. We have proposed a new model from a joint analysis of multiple newly available geophysical observations to interpret the resulting anisotropy as mainly due to the absolute‐plate‐motion‐driven mantle flow deflected by the thick lithosphere of the eastern Arabian plate. Relatively larger splitting times are locally revealed at the rift zone and attributed to additional lithospheric anisotropy from the shearing‐oriented melt pockets whose existence further induces complex anisotropy with slight difference of fast orientations between the upper and lower layer anisotropy. The overall rift‐parallel fast orientations, when combined with the absence of low‐velocity and hot thermal anomalies in the mantle transition zone, rule out the role of mantle plume or edge‐driven convection in the rift development and further infer the Dead Sea rift to evolve in a passive mode.

Tectonic evolution and structural geology of the Jurassic succession in the Zubair oil field, southern Iraq

This study investigates the structural style and tectonic evolution of Jurassic succession in southern Iraq, within the Zubair oil field, which are crucial for charging oil to the Cretaceous reservoirs, utilized 3-D seismic reflection data to explore its complex geological history. The field is located in the Mesopotamian plain on the northeast Arabian Plate in southern Iraq. Four folds recognized: Hammar, Shuaiba, Rafdyia, and Safwan, each shaped by specific geodynamic processes. Hammar, Shuaiba, and Safwan are characterized as salt-related folds, influenced by salt tectonics. Rafdyia is identified as a compression-related fold formed due to the convergence of the Arabian and Eurasian plates. Forty-seven faults were identified, with diversity patterns and spatial distributions suggesting a tectonic history marked by three distinct phases: extensional tectonics, extensional with concurrent salt activity, and plate convergence. These phases have created a series of graben structures that, along with the identified folds, highlight the role of three primary tectonic processes: basement tectonics, salt dynamics, and plate interactions in shaping the structural style of the Zubair oil field during the Jurassic time.

Impact of Fault and Reef on Reservoir Pressure Behavior and Production Profile: Case Study- South Iraqi Oilfield

The study area, which consists of carbonate, is located in the unstable Mesopotamian basin on the Arabian plate, which makes it a field with high heterogeneity. It has a discrepancy in its bubble point pressure, which raises concerns about the faults or reefs that caused it. The study's main objective is to determine how faults and reefs impact production performance and pressure behavior under a future development strategy. This goal will be achieved by completing the necessary seismic, static, and dynamic models. After re-evaluating the seismic survey data, the seismic analysis detected many irregular amplitudes of reflected events and abrupt discontinuities, indicating either a reef or a fault. The static model was built based on seismic possible results and to make them as inputs for building the reservoir model. Based on the history-matching results, faults were detected, while reefs were ruled out. The development plan was implemented for the next 20 years in four cases, and case four had the most favorable results among all the cases, with production plateauing at 140 MSTB/D and a cumulative volume equal to 1.09 MMMSTB. The reservoir pressure behavior shows a hierarchical drop in all cases, with some differences, including a sharp decline in the area of the proposed wells and the fault, which has become a compartment that prevents reservoir compensation from adjacent regions.

Neotectonic evolution of the Caucasus: recent vertical movements and mechanism of crustal deformation

It is generally recognized that the formation of the fold-and-thrust tectonic structures of mobile belts on continents is associated with crushing and narrowing of the Earth’s crust as a result of collision of lithospheric plates. The deformation of the Caucasian lithosphere in the neotectonic time is generally consistent with these ideas. However, the block differentiation of the Caucasian lithosphere introduces specific features in the directivity of modern vertical and horizontal movements. In this paper, we analyze vertical movements of the Caucasus estimated by means of high-precision leveling over more than a century and consider their spatial correlation with tectonics, seismicity, stress-strain state, and geophysical fields. A clear relationship indicating the deep tectonic nature of the long-term uplifting of the Caucasus crust is revealed. Due to the differentiation of the Arabian plate movement, the territory of the Caucasus is divided into provinces that differ from each other in the pattern of modern movements, in the orientation of faults, and in the stress-strain state. The seismic regime in these provinces also has differences in the number of seismic events and focal mechanisms of the earthquakes. We propose a model of the deformation mechanism of the Greater Caucasus, which takes into account the long-term trend of the Caucasus uplifting in the conditions of general shortening of the Earth’s crust. The results of the analysis are used as a basis for discussion of a probable mechanism of tectonic evolution of the Greater Caucasus in the neotectonic time, which can be used in the assessment of seismic hazard in the North Caucasus.

Predicting heat flow in the Iranian plateau and surrounding areas based on machine learning approach

While Surface Heat Flow (HF) is an important constraint unveiling the Earth interior's thermal structure, estimates over the Iranian plateau are sparse. In the presence of sparse estimates, machine learning provides a statistical-based prediction of HF based on a supervised predictor trained in the far-field regions. Here, we imply the machine learning technique of Gradient Boosting Regression Tree (GBRT) which has been proved to be efficient for predicting HF projecting complexities and nonlinearities of input features into predicted HF. Our results provide a robust map of HF with resolution of one degree and uncertainty of up to ±6 mW/m2 over Iran and surrounding regions. The predicted HF has an average value and minimum standard deviation of 59 and 10 mW/m2, respectively. The quality of the algorithm performance is 16%, indicated by normalized Root-Mean-Square Error (RMSE), and linear correlation of predicted HF with validation set is 97%. Total number of trees considerably prevents overfitting which is believed to be solely controllable by shrinkage factor, maximum tree depth and cross-validation scheme. The three most important features, having the highest influence on the output HF, are thermal Lithosphere-Asthenosphere Boundary (LAB), distance to volcanoes and distance to trenches. The extreme importance of LAB in HF prediction of Iran indicates that the lithospheric thermal structure is significantly controlled by lithospheric thickness in the Iranian plateau. Selection of petrologically and seismologically consistent LAB guarantees the precision of the predicted HF. Our results imply that high HF in central Iran is in agreement with extensive magmatism since the Paleozoic. Additionally, the high HF in Zagros keel (originally Proterozoic as the Zagros keel appears to be the Arabian plate front) indicates the tectonically active system of the Arabia-Eurasia collision zone, high likely, in the form of lithospheric mantle deformation.

What controls structural variations along the Zagros Collision Zone? Insights from geophysical observations and thermo-mechanical modelling

The Zagros Collision Zone is a complex tectonic region formed as a consequence of the collision between Arabia and Eurasia after the subduction of the Neo-Tethys ocean. The NW-SE striking Zagros orogen consists of the following parallel tectonic units (from SW to NE): Zagros Fold and Thrust Belt (ZFTB), Sanandaj–Sirjan Metamorphic Zone (SSZ), and Urumieh–Dokhtar Magmatic Arc (UDMA). In this study, we perform a combined analysis of recent geophysical data, revealing pronounced differences in the crustal and lithospheric structure along the Zagros Mountains. The northwestern sector shows a fairly uniform crustal thickening across the broad symmetric orogen from the ZFTB to the UDMA. In contrast, in the central Zagros, the transition from a relatively narrow zone of high elevations and high-frequency relief in the ZFTB to a smoother surface topography of the SSZ and UDMA occurs with an abrupt increase in Moho depth below the SSZ. The last observation has recently been interpreted as a result of “relamination” process, where the felsic upper crust of the Arabian plate underthrust the mafic crust of the Iranian plate. We present geodynamic numerical models of crustal relamination during continental collision and compute static gravity field of the resulting structures. We show that oblique closure of the Neo-Tethys affects lateral variations in the style and extent of crustal relamination, which control the observed along-strike changes in crustal configuration and orogen altitude. In particular, a narrow and higher orogen (as in the central Zagros) develops in the experiments with a young and wide oceanic plate, whereas an old and narrow subducting plate tends to form a broad and lower topography (as in the northwestern Zagros). This is geometrically consistent with the progressive closure of the Neo-Tethys from NW to SE during the oblique continental collision between Arabia and Eurasia.

Provenance of mixed volcaniclastic-carbonaticlastic gravity-flow deposits: a case study from the Cretaceous of the southern Central Alborz (Iran)

ABSTRACT Understanding the petrographic and geochemical characteristics of different tectonic settings is essential to improving traditional methods of identifying the provenance of palaeo-sedimentary environments. This research focuses on the K2b unit, which consists of mixed carbonate and volcanic lithic sandstones located in Iran with the age of the Turonian-Early Campanian period. Five sedimentary lithotypes with distinct petrographic and geochemical signatures were identified in the Turonian/Lower Campanian K2b unit, which consists of coarse-grained fan-delta strata. Carbonate and volcanic lithic fragments are the most characteristic components of mostly quartzo-lithic to felspatho-litho-quartzose sandstone layers, documenting a unidirectional paleocurrent pattern with the north-eastward direction. The original composition has undergone diagenesis, resulting in the precipitation of authigenic carbonates and depleting Rare Earth Elements (REE) except for Eu, which shows a positive anomaly. The K2b fan delta was situated on the margin of the proto-south Caspian back-arc basin, and the sediments were sourced from the undissected magmatic arc. The gravity flow deposits in the K2b unit were likely triggered by tectonic activity in the catchment area of the fan delta, leading to uplift and formation of relief associated with the regional Mosha Fault and, on a larger palaeogeographic scale, with subduction of the Arabian plate beneath the Iranian plate during Turonian-Early Campanian.

Anelastic Tomography of the Arabian Plate

ABSTRACT In this study, we investigate the upper-mantle structure of the Arabian plate based on anelastic full-waveform inversion. The Arabian plate is composed of two main geological provinces—the Arabian Platform in the east and the Arabian Shield in the west. The Shield is dotted with areas of Cenozoic volcanism (harrats) whose precise tectonic and geodynamic origin is still debated. To help shed light on the deep geophysical properties of the Arabia plate and seismic signatures in the Earth’s upper mantle related to the surface volcanism, we use ∼38,400 three-component waveforms filtered between 25 and 100 s from 64 well-distributed regional earthquakes. We fit frequency-dependent travel-time and amplitude information. We follow a hierarchical inversion strategy in which we initially invert for the elastic structure and subsequently for both the elastic and anelastic parameters simultaneously. We assess the resolution and trade-offs between model parameters by conducting point spread function tests. Our model reveals low-wavespeed anomalies associated with mantle material that may originate from the Afar plume. In addition, we identify significant shear attenuation anomalies in the southern and central regions of the western margin of the Arabian plate. We suggest that these anomalies are linked to either the hot asthenosphere from the Afar plume or partial melting triggered by lithospheric thinning along the Red Sea rift.

Adjoint Waveform Tomography for Crustal and Upper Mantle Structure of the Middle East and Southwest Asia for Improved Waveform Simulations Using Openly Available Broadband Data

ABSTRACT We present a new model of radially anisotropic seismic wavespeeds for the crust and upper mantle of a broad region of the Middle East and Southwest Asia (MESWA) derived from adjoint waveform tomography. The new model enables fully 3D simulations of complete three-component waveforms and provides improved fits that were not possible with previous models. We inverted over 32,000 waveforms from 192 earthquakes recorded by over 1000 openly available broadband seismic stations from permanent and temporary networks in the region with highly uneven coverage. Inversion iterations proceeded from the period band 50–100 s in six stages and 54 total iterations reducing the minimum period to 30 s. Our final model, MESWA, improves waveform fits compared to the starting and other models for both the data used in the inversion and an independent validation set of 66 events. Restitution tests indicate that the model resolves features in the central part of the model to depths of about 150 km. The new model reveals tectonic features imaged by other studies and methods but in a new holistic model of anisotropic shear and compressional wavespeeds (VS and VP, respectively) covering a larger domain with smaller scale length and amplified features. Examples include low crustal VS in the Tethyan belt and low mantle VS following divergent (Gulf of Aden, Red Sea) and transform (Dead Sea fault) margins of the Arabian plate. Low VS is imaged below Cenozoic volcanic centers of the Mecca–Madina–Nafud Line, Arabian Peninsula, and the Türkiye–Iran border region. Elevated VS tracks Makran subduction under southeast Iran with near vertical dip. MESWA could be used as a starting model for further improvements, say, using waveforms from in-country seismic networks that are not currently openly available and/or smaller-scale studies targeting a shorter period. The model could be used to improve earthquake hazard studies and nuclear explosion monitoring.

Geology, geochemistry, mineralization and fluid inclusion characteristics of the SW of Hormuz Island banded iron formations, southern Iran

The Hormuz Island banded iron formations (HIBIFs) are situated at the Zagros Folded Zone in southern Iran. The BIFs occur intercalated with the Neoproterozoic Hormuz series, an evaporite and siliciclastic succession with pyroclastic rocks, and were deposited on the continental rift margin of the Arabian plate. The HIBIFs are banded rocks consisting of the alternation of dark Fe-rich and reddish-brown Si-rich layers, and belong to oxide facies iron formations. The post-Archean Australian shale normalized rare earth elements and yttrium patterns of HIBIFs have the characteristics of both hydrothermal solutions and seawater. The sharp positive Eu anomaly (2.10–6.90) may be inherited from high-temperature hydrothermal solutions, while slightly negative Ce anomalies (0.57–0.82) are inherited from seawater. The homogenization temperature and salinity of primary fluid inclusions range from 180.7 to 474.3°C and from 2.24 to 12.85 wt% NaCl, respectively, which suggests that intermediate- to high-temperature hydrothermal fluids and seawater contributed to the formation of the HIBIFs. The Eu/Sm and Sm/Yb ratios in BIFs are between the values of hydrothermal fluids and seawater. In summary, all geological and geochemical data suggest that the HIBIFs are a post-great oxidation event iron formation pulse at the end of the Ediacaran period. However, this is actually not similar to Neoproterozoic syn-glacial iron formations. Instead, this is a new occurrence of iron formation in an overlooked/understudied time period when either global or local conditions were conducive to iron deposition. The iron deposition on Hormuz Island does not appear to be triggered by fluctuating atmospheric oxygen or sea-level variations, but instead may be related to syn-basinal volcanism in the active continental rift margin environment in anoxic submarine condition. Thematic collection: This article is part of the Geochemical processes related to mined, milled, or natural metal deposits collection available at: https://www.lyellcollection.org/topic/collections/geochemical-processes-related-to-mined-milled-or-natural-metal-deposits

Modelling principal stress orientations in the Arabian Plate using plate velocities

Abstract We model maximum principal horizontal stress orientations in the Arabian Plate using a 3D finite element approach in conjunction with plate velocities. To capture the impact of geometry and tectonics, the model considers an accurate plate boundary shape and associated deformations. Three primary geological units represent plate architecture: sedimentary cover, crust and upper mantle. The mesh resolution varies to capture important geometrical features. Subsequently, we calculate the stress field using the force balance equation. Displacement boundary conditions are evaluated as accumulative deformation. NE–SW maximum principal horizontal stress (S Hmax ) azimuths dominate in northeastern Saudi Arabia and Kuwait, whilst NW–SE to NNW–SSE define the Dead Sea area. The Red Sea Basin and Saudi Arabia's interior is characterized by north–south S Hmax azimuths. Iraq's western area shows azimuths from NNW–SSE to NW–SE due to the collision at the Zagros Mountain Range, but changes to NE–SW in the east at the Zagros fold-and-thrust belt. An extensive literature review reveals publicly available S Hmax azimuth data which augment the sparse records compiled in the World Stress Map database. Our simulated S Hmax azimuths are consistent with these data. The results further corroborate ongoing tectonic processes, deepen our understanding of in situ stress variation drivers and inform current elastic deformation mechanisms in the Arabian Plate.

Strontium isotope proxy of sedimentological records reveals uplift and erosion in the Southeastern Neo-Tethys ocean during the late Cretaceous

The mutual interplays between plate tectonic processes, orogenesis and continental uplift, high-flux magmatism, and high sedimentation rates can affect the geochemical signatures and composition of marine sediments. Here, we examine two major disconformities, the Cenomanian–Turonian boundary (CT-ES) and the middle Turonian (mT-ES) exposure surfaces, from the Upper Cretaceous sedimentary successions of the southeastern Neo-Tethys Ocean in the Zagros Basin (Iran). The disconformities are expressed as distinct positive peaks in rubidium (Rb) contents and 87Sr/86Sr isotopic ratios of carbonates. The 87Sr/86Sr values of samples bracketing the disconformities in seven well cores give average age ranges of 94.4–93.6 Ma for the CT-ES and 91–86 Ma for the mT-ES. These ages fall in the timespan of forearc/ophiolite formation through subduction initiation in the Neo-Tethys realm (southern margin of Eurasia), high convergence velocities between Arabia and Eurasia, and blueschist exhumation. All these processes involved buckling of the Neo-Tethyan lithosphere, initiating the Neo-Tethys closure and a high erosion rate on the Eurasian margin. The first two mechanisms exerted considerable compressional forces on the adjacent carbonate platforms, reactivated basement faults, and led to the uplift and erosion of the Arabian Plate, which provided the high contents of Rb and the high 87Sr/86Sr ratios in the carbonates.

Applying Geostatistics to Understand Seismic Activity Patterns in the Northern Red Sea Boundary Zone

A comprehensive geostatistical analysis was conducted on a dataset comprising 24,321 seismic events in the Red Sea region, spanning from 1997 to 2020. This analysis involved the creation of a new seismic activity database, incorporating data from both Egyptian and Saudi Seismic Networks. This enriched database provided a robust foundation for a detailed examination of the seismic patterns and activities in the region. Utilizing geographic information systems and various spatial analytic methods, it identifies seismic patterns and tectonic influences. The findings reveal significant seismic clustering along the Central Red Sea axis, indicative of active rifting between the Nubian and Arabian plates. The study demonstrates spatial autocorrelation in seismic activities, with high-high clusters marking zones of elevated seismicity. Kernel Density Estimator analyses highlight concentrated seismic activity in the Gulfs of Aqaba and Suez. Higher magnitude events are shown to localize in areas of greater tectonic stress, aligning with known geological features. This research provides critical insights into the seismic dynamics of the Red Sea, showcasing the effectiveness of geostatistical techniques in analyzing seismic data in tectonically active regions.

2023 Earthquake Doublet in Türkiye Reveals the Complexities of the East Anatolian Fault Zone: Insights from Aftershock Patterns and Moment Tensor Solutions

Abstract The East Anatolian Fault Zone (EAFZ) is a 700-km-long left-lateral transform fault system along the boundary between the Anatolian and Arabian plates. In the interseismic period, the eastern segments of the EAFZ display relatively uniform seismic activity, whereas the western segments exhibit seismic gaps, localized clusters, and extensive diffuse zones. Hence, our understanding of the geometry and kinematics of the western and northern segments remain limited. The occurrences of the 6 February 2023 Mw 7.8 Kahramanmaraş on the main branch and Mw 7.6 Elbistan earthquakes on the northern branch have led to complex aftershock activity shedding light on the nature of these relatively silent segments. In this study, to better understand the complexities of the fault, we constructed a comprehensive catalog of ∼32,000 earthquakes that occurred between 6 February 2023 and 30 March 2023, using a deep-neural-network-based picker. In addition, 170 earthquake source mechanisms with Mw 3.5+ were obtained from regional moment tensor inversion. The spatial distribution of the aftershocks shows that most of the activity clusters around the fault bends and major depressions. Previously unmapped and inactive secondary faults of varying lengths are identified within these geometrical complexities. The new seismological observations provide compelling evidence of extension along the Karasu valley, compression occurring along the Erkenek segment, reactivation of basin faults near the Narlı fault zone and the persistent shallow seismic creep of the Pütürge segment. The analysis of seismicity and earthquake source mechanisms along the northern branch reveals the structures of previously inactive faults, both near the extensional Göksun bend in the west and the compressional Nurhak fault complex in the east. In summary, we illustrate the intricacies of previously quiet segments of the EAFZ and aim to gain a deeper understanding of how secondary faults and geometrical discontinuities along the EAFZ played a role in shaping the 2023 Türkiye doublet earthquakes.

Middle Miocene renewed subduction of arabian-eurasian plates: Implications for convergent tectonic mechanisms, tectonically-induced fluid overpressures, and sediment recycling dynamics

The complex interplay between thrust wedge deformation, tectonically-induced fluid overpressures, and the complex phases of wedge-top sedimentary depositional systems in active plate convergent margins presents a formidable challenge. The offshore Makran accretionary wedge (MAW) is the world's largest, formed by the convergence of Arabian plate underneath Eurasian plate in the Early Cretaceous, followed by Middle Miocene renewed subduction. In this research, geological and geophysical constraints derived from seismic and borehole stratigraphy, seismic attributes, depth structural maps, isopach maps and 3D structural geological models reveal that Middle Miocene renewed subduction controls thrust wedge deformation. Additionally, it influences deep fluid overpressure and the deformational pattern of wedge-top sedimentary depositional systems. The seismic data analysis suggested that the basement pre-kinematic Himalayan turbidities depositional system (HTDs) have been tectonically incorporated into the accretionary wedge by Middle Miocene renewed subduction, which gave rise to complex folding and N-dipping imbricate thrusting features. These N-dipping imbricate thrust faults initiated sediment underplating and served as major structural pathways for deep fluid overpressure migration, resulting in the formation of fluid escape pipes. The fluid escape pipes exhibit conical and bifurcating geometries with inclination angles of approximately 73°, 90°, and 100°, signifying the upward migration of deep overpressured fluids. Furthermore, the Middle Miocene to Pliocene syn-kinematic piggyback and growth depositional system (PGDs) show progressive thickening (Max ∼3600 m) towards onshore MAW. It lies unconformable above the pre-kinematic HTDs and carries valuable sedimentation records, growth stratal patterns, onlap terminations, and truncations against growing structures, revealed the timing and spatial deformation of thrust faults in 3D space. In contrast, the Pleistocene to Recent post-kinematic progradational depositional system (PDs) exhibits clinoforms marked by top-lapping, on-lapping, and down-lapping reflection, which are primarily controlled by sediment recycling dynamics and sea level change since Pleistocene. It shows progressive thickening (Max ∼1800m) towards the Makran subduction zone and lies unconformably above the syn-kinematic PGDs. Abridging the analyses, the tectonic reconstruction and deformation mechanisms model shows four phases, e.g. (1) initiation of subduction and accretionary wedge formation in Eocene, (2) N-dipping imbricate thrust faults and deep fluid overpressure triggered by Middle Miocene renewed subduction, (3) development of piggyback basins and growth stratal geometries in Middle Miocene to Pliocene, (4) thrust deformation ceases and development of progradational depositional system.

Stress field and tectonic regime of the Eastern Mediterranean from inversion of earthquake focal mechanisms

The formal stress inversions of 1258 earthquake focal mechanism solutions reveal the presence of six distinct stress regimes. However, the predominant tectonic regimes comprise normal faulting (39%), strike-slip faulting (29%), thrust faulting (25%), and unspecified oblique faulting (7%). The division of the study area into zones based on structural and deformation patterns has provided valuable insights into the variations in the stress field and tectonic processes within this seismically active region. For each designated zone, reduced stress tensors were derived using the improved right dihedron method and the rotation optimization technique implemented by the Win-Tensor software.The stress field derived from the entire dataset is characterized by R′ = 1.0 and an NW-SE SHmax orientation, strongly influenced by the tectonic stress regime of the Hellenic Arc. In specific regions such as CYS, CEM, and WEM, the prevailing tectonic regimes is characterized by a predominant compressive setting with a stress index (R' = 2.0 to 2.5). This pattern aligns with neotectonic deformation associated with the subduction of the African Plate beneath the Eurasian Plate. The EMZ Zone exhibits a strike-slip tectonic regime with an R' of 1.50, primarily influenced by the Dead Sea Transform Fault. This fault accommodates differential motion between the African and Arabian plates in the NNE direction, resulting in left-lateral strike-slip motion along the plate boundary. The mean slip tendency values, varying between 0.62 and 0.66, suggests that the faults in the study area are appropriately oriented for slip or shear displacement, indicating an elevated probability of reactivation.

First record of Reticulinella? kaeveri in the Laffan and Ilam formations (Zagros fold and thrust belt, SW Iran): new constraints on the chronostratigraphic calibration of the Arabian Plate sequence stratigraphy

Over the past two decades, sequence stratigraphy has proven to be a valuable tool in addressing challenges arising from the inconsistent application of lithostratigraphic nomenclature across diverse geological provinces. It has been particularly successful in achieving regional correlations within the Cretaceous deposits of the Arabian Plate. The key sequence stratigraphic surface in the currently adopted standard sequence stratigraphic scheme is the K150 SB, marking the transition from a passive to an active margin along the eastern edge of the Arabian plate. Despite its importance, the chronostratigraphic age of this surface is poorly constrained. In the Zagros FTB, the uppermost part of the Sarvak Formation, just below the K150 SB, was recently assigned to the upper part of middle Turonian to upper Turonian, based on the presence of Reticulinella? kaeveri. Our research reveals that the range of R.? kaeveri extends above the K150 SB as this species is also present in the Laffan and base of Ilam formations. The Last Occurrence of this taxon provides a new chronostratigraphic marker of the upper Turonian within the Ilam Formation. This finding proves that more Turonian deposit are present in the study area than was previously recognized. We have studied the deposits enclosing the K150 SB in outcrop sections and wells along a transect from basin to platform margin to inner platform setting. Based on planktonic foraminifera and calcareous nannofossils biostratigraphy of basinal sections and sequence stratigraphic correlation to carbonate platform sections, the age of the uppermost part of the Sarvak Formation, immediately below the K150 SB, is firmly constrained within the interval lower Turonian–lower part of middle Turonian. Sequence stratigraphic correlation from basin to platform interior reveals also that the oldest deposits above the K150 SB are not younger than late Turonian. Our new data represents a significant improvement in the chronostratigraphic calibration of sequence stratigraphy in the Cretaceous of the Zagros fold-and-thrust belt.

Vase-shaped microfossils and possible trochamminid foraminifera from the Ediacaran Dhaiqa Formation of Saudi Arabia

We report the first discovery of vase-shaped microfossils (VSMs) and possible multichambered foraminifera from the Ediacaran rocks of Saudi Arabia. The Ediacaran successions of Saudi Arabia are well exposed in the northwestern and central part of the Arabian plate but are relatively understudied due to the lack of economic potential. The exposures can be found in different small sedimentary basins distributed along the flanks of Najd Fault system of the western Arabian Plate. The Dhaiqa sub-basin located near the historic city of Al-Ula contains some of the best exposures of Ediacaran Mattar and Dhaiqa Formations with collective exposure almost 400 m thick. These formations (especially the Dhaiqa Formation) were investigated to describe sedimentary facies, depositional environment, and possible microfossils. This study focuses on the identification of vase-shaped microfossils and possible trochamminid foraminifera of Ediacaran age that are herein recognized for the first time in Saudi Arabia. Outcrop samples were thin-sectioned and analyzed to reveal nine sedimentary facies belonging to four facies associations. The observed microfossils were found in a total of four samples from the cherty/siliceous carbonate and sandy microbialite facies. The microfossils are observed to be associated with diagenetic chert, which is abundant in these facies. The two facies contain a sparse microfossil assemblage with vase-shaped microfossils, which are single-chambered microfossils of uncertain taxonomic affinity, and possible multichambered agglutinated foraminifera that resemble trochamminids.