Antibacterial Properties Research Articles

In vitro analysis of electrospun nanofibrous polycaprolactone loaded with Rhamnus prinoides leaf extract as potential wound dressing

AbstractRhamnus prinoides, an indigenous Ethiopian traditional medicinal plant, has been used for treating various ailments including skin conditions in traditional formulations. In this study, plant leaf extract has been incorporated into polycaprolactone (PCL) nanofibers through electrospinning at concentrations of 1%, 3%, 5%, 7% wt/vol for the first time. The presence of extract in the nanofiber was analyzed using Fourier transform infrared. The in vitro antibacterial activity, release, contact angle, thermal, and mechanical properties of the nano mats were characterized. The scanning electron microscopy (SEM) analysis revealed that the produced mats are continuous, smooth, bead‐less, and inter connected. The examination of SEM images using ImageJ revealed that the fiber diameter ranged from 219 ± 47 nm to 284 ± 114 nm. The mats showed excellent anti‐bactericidal activity against both Staphylococcus aureus and Escherichia coli. During the 72‐h in vitro release investigation, an initial burst release was observed within the first 12 h, followed by sustained release of the extract over long period of time. The contact angle analysis showed, addition of leaf extract to the PCL nanofiber increased hydrophilicity. Furthermore, the nanofiber membranes had favorable mechanical properties. Overall, these findings suggested that R. prinoides leaf extract‐functionalized PCL nanofibers could be effective wound dressings with broad‐spectrum antimicrobial activity.

Chalcones—Features, Identification Techniques, Attributes, and Application in Agriculture

This review article is a comprehensive and current overview on chalcones, covering their sources, identification methods, and properties with a particular focus on their applications in the agricultural sector. The widespread use of synthetic pesticides has not only led to increased resistance among weeds and pests, resulting in economic losses, but it has also raised significant health concerns due to the overuse of these chemicals. In line with the European Green Deal 2030 and its Farm to Fork strategy, there is a targeted 50% reduction in the use of chemical pesticides by 2030, emphasizing a shift towards natural alternatives that are more environmentally sustainable and help in the restoration of natural resources. Chalcones and their derivatives, with their herbicidal, fungicidal, bactericidal, and antiviral properties, appear to be ideal candidates. These naturally occurring compounds have been recognized for their beneficial health effects for many years and have applications across multiple areas. This review not only complements the previous literature on the agricultural use of chalcones but also provides updates and introduces methods of detection such as chromatography and MALDI technique.

Highly Conjugated Nanozyme with Non Coordination Saturation for Cascaded Enhanced POD Reaction Driving Antibacterial Therapy

AbstractThe misuse of antibiotics leads to emergence of drug‐resistant bacteria. Developing artificial nanozymes with high stability and excellent catalytic performance is desirable to substitute for antibiotics, but still remains huge challenge. Herein, the study reports a new strategy for cascaded enhanced peroxidase (POD) reaction driving antibacterial therapy via constructing 2D conjugated metal‐organic frameworks (MOFs) with non coordination saturation as nanozyme. It is demonstrated that the non coordination saturation Cu atom promotes the adsorption of H2O2, followed by the Cu‐HHTP MOFs with high conjugated structure can enhance the photogenerated electron transfer for ·OH generation in POD reaction. The sequential enhancement of substrate adsorption and decomposition endows the as‐made Cu‐HHTP MOFs with outstanding antibacterial property of >99.9999% elimination with a concentration only 1/133 that of traditional nanozyme. In addition, the study also certifies its excellent in vivo antimicrobial activity and biocompatibility, indicating the therapeutic potential for infections by drug‐resistant bacteria.

Enhanced Mechanical Strength and Sustained Drug Release in Carrier-Free Silver-Coordinated Anthraquinone Natural Antibacterial Anti-Inflammatory Hydrogel for Infectious Wound Healing.

The persistent challenge of healing infectious wounds and the rise of bacterial resistance represent significant hurdles in contemporary medicine. In this study, based on the natural small molecule drug Rhein self-assembly to form hydrogels and coordinate assembly with silver ions (Ag+), a sustained-release carrier-free hydrogel with compact structure is constructed to promote the repair of bacterial-infected wounds. As a broad-spectrum antimicrobial agent, Ag+ can avoid the problem of bacterial resistance caused by the abuse of traditional antibiotics. In addition, due to the slow-release properties of Rhein hydrogel, continuous effective concentration of Ag+ at the wound site can be ensured. The assembly of Ag+ and Rhein makes the hydrogel system with enhanced mechanical stability. More importantly, it is found that Rhein effectively promotes skin tissue regeneration and wound healing by reprogramming M1 macrophages into M2 macrophages. Further mechanism studies show that Rhein realizes its powerful anti-inflammatory activity through NRF2/HO-1 activation and NF-κB inhibition. Thus, the hydrogel system combines the excellent antibacterial properties of Ag+ with the excellent anti-inflammatory and tissue regeneration ability of Rhein, providing a new strategy for wound management with dual roles.

Phytochemical Analysis and Antibacterial Property of Green Okra Fruit Extract Against Enterococcus Faecalis Bacteria Tooth Root Canals

Background: Root canal treatment aims to eliminate bacteria that cause pulp abnormalities. Enterococcus faecalis is a bacteria in the infected tooth pulp, even those that have been treated. Irrigation was carried out together with biomechanical preparation using a combination of NaOCl and EDTA. The material is antibacterial, dissolves the organic and inorganic tissue of the root canal dentin, lacks odor and irritates the soft tissue. An alternative irrigation material from Jember cultivation is green okra. The fruit contains flavonoids, tannins, steroids, terpenoids. This study aims to analyze the phytochemical and antimicrobial properties of green okra fruit extract on the growth of E. Faecalis bacteria. Method: Phytochemical analysis to see the content of alkaloids, flavonoids, tannins, saponins, steroids and terpenoids. Antimicrobial analysis included the inhibition test using disc diffusion, MIC and MBC tests using the dilution method. Samples were green okra fruit extract 100%, 50%, 25%, 12.5%, 6.25%, 3.125%, 1.563%, 2.5% NaOCl, 17% EDTA. The MIC and MBC tests were examined for Optical Density values ​​with a spectrophotometer and then subcultured to see whether there was growth of bacterial colonies. Analysis of the research data used ANOVA and LSD parametric statistical tests Result: Phytochemical content sequentially is Polyphenols, Alkaloids, Flavonoids, Saponins, Tannins, Steroids, Terpenoids. Antimicrobial properties Green okra fruit extract concentration of 6.25% had the smallest inhibition zone, the largest OD value and the highest colony count. The concentration of 100% has the largest inhibition zone, the lowest OD, there are no bacterial colonies. Antimicrobial power The concentration of 100% is close to that of 17% EDTA and 2.5% NaOCl. In the Kruskal Wallis test, there were differences in the Mann-Whitney test study group, there were significant differences between all groups Conclusion: The phytochemical content of green okra fruit extract has antimicrobial activity against E. faecalis approaching 2.5% NaOCl and 17% EDTA at 100% concentration, 6.25% MIC concentration and 12.5% ​​MBC concentration. Keywords: Phytochemical, Antibacterial, Green okra fruit extract, Enterococcus faecalis

Preparation, biological activity and antibacterial properties of tantalum surface-doped Ca2+/Zn2+ nanorods

In this research, we utilize porous tantalum, known for its outstanding elastic modulus and biological properties, as a base material in biomedical applications. The human skeletal system is rich in elements like Ca and Zn. The role of Zn is crucial for achieving a spectrum of sterilizing effects, while Ca is known to effectively enhance cell differentiation and boost cellular activity. The focus of this study is the modification of porous tantalum using a hydrothermal method to synthesize Ca2+/Zn2+-doped Ta2O5 nanorods. These nanorods are subjected to extensive characterization techniques to confirm their structure and composition. Additionally, their biological performance is evaluated through a range of tests, including antibacterial assessments, MTT assays, and bacteria/cell scanning electron microscopy (SEM) analyses. The objective is to determine the most effective method of surface modification for porous tantalum, thereby laying a foundational theoretical framework for its surface enhancement.

Stimuli-Responsive Hydrogels for Antibacterial Applications.

Hydrogels have emerged as promising candidates for biomedical applications, especially in the field of antibacterial therapeutics, due to their unique structural properties, highly tunable physicochemical properties, and excellent biocompatibility. The integration of stimuli-responsive functions into antibacterial hydrogels holds the potential to enhance their antibacterial properties and therapeutic efficacy, dynamically responding to different external or internal stimuli, such as pH, temperature, enzymes, and light. Therefore, this review describes the applications of hydrogel dressings responsive to different stimuli in antibacterial therapy. The collaborative interaction between stimuli-responsive hydrogels and antibacterial materials was discussed. This synergistic approach, in contrast to conventional antibacterial materials, not only amplifies the antibacterial effect but also alleviates adverse side effects and diminishes the incidence of multiple infections and drug resistance. The review provides a comprehensive overview of the current challenges and outlines future research directions for stimuli-responsive antibacterial hydrogels. It underscores the imperative for ongoing interdisciplinary research aimed at unraveling the mechanisms of wound healing. This understanding is crucial for optimizing the design and implementation of stimuli-responsive antibacterial hydrogels. Ultimately, this review aims to offer scientific guidance for the development and practical clinical application of stimuli-responsive antibacterial hydrogel dressings. This article is protected by copyright. All rights reserved.

All-in-one hydrogel patches with sprayed bFGF-loaded GelMA microspheres for infected wound healing studies

The current wound healing process faces numerous challenges such as bacterial infection, inflammation and oxidative stress. However, wound dressings used to promote wound healing, are not well suited to meet the clinical needs. Hyaluronic acid (HA) not only has excellent water absorption and good biocompatibility but facilitates cell function and tissue regeneration. Dopamine, on the other hand, increases the overall viscosity of the hydrogel and possesses antioxidant property. Furthermore, chitosan exhibits outstanding performance in antimicrobial, anti-inflammatory and antioxidant activities. Basic fibroblast growth factor (bFGF) is conducive to cell proliferation and migration, vascular regeneration and wound healing. Hence, we designed an all-in-one hydrogel patch containing dopamine and chitosan framed by hyaluronic acid (HDC) with sprayed gelatin methacryloyl (GelMA) microspheres loaded with bFGF (HDC-bFGF). The hydrogel patch exhibits excellent adhesive, anti-inflammatory, antioxidant and antibacterial properties. In vitro experiments, the HDC-bFGF hydrogel patch not only showed significant inhibitory effect on RAW cell inflammation and Staphylococcus aureus (S. aureus) growth but also effectively scavenged free radicals, in addition to promoting the migration of 3 T3 cells. In the mice acute infected wound model, the HDC-bFGF hydrogel patch adhered to the wound surface greatly accelerated the healing process via its anti-inflammatory and antioxidant activities, bacterial inhibition and pro-vascularization effects. Therefore, the multifunctional HDC-bFGF hydrogel patch holds great promise for clinical application.

Biofunctionalization of dental abutments by a zinc/chitosan/gelatin coating to optimize fibroblast behavior and antibacterial properties.

Tightly sealed peri-implant gingival tissue provides a barrier against oral bacterial invasion, protecting the alveolar bone and maintaining long-term implant survival. To investigate if zinc can enhance the integration between peri-implant gingival tissue and abutment surface, we herein present novel zinc/chitosan/gelatin (Zn/CS/Gel) coatings prepared using the electrophoretic deposition (EPD) technique. The effect of these coatings on human gingival fibroblasts (hGFs) was investigated by culturing these cells on top of the EPD coatings. Surface characterization demonstrated that Zn2+ were released in a sustained and pH-responsive manner. The preclinical cell culture evaluation of these coatings indicated that the zinc-containing coatings enhanced cell migration, adhesion and collagen secretion of hGFs. Moreover, the zinc-containing coatings exhibited antibacterial efficacy by inhibiting the growth of Porphyromonas gingivalis and reducing attachment of Staphylococcus aureus. Notably, zinc-free CS/Gel coatings prevented attachment of P. gingivalis as well. The coatings were also shown to be cytocompatible with epithelial cells and osteoblasts, which are other relevant cell types which surround dental implants after clinical placement. Based on our findings, it can be concluded that Zn-containing coatings hold promise to enhance the adhesion of gingival tissue to the implant surface, which may potentially contribute to the formation of a robust peri-implant soft sealing counteracting bacterial invasion.

Synthesis and Antibacterial Evaluation of Novel Small-Molecule Antibacterials of a Reduced Acridine Structure in S. aureus Strains Including MRSA.

The increasing antibacterial drug resistance remains a threat to global health with increasing mortality and morbidity. There is an urgent need to find novel antibacterials and develop alternative strategies to combat the increasing antibacterial drug resistance. <P> </P> Objective: We aimed to synthesize novel small-molecule antibacterials to evaluate the structuredependent antibacterial compound activities against S. aureus and MRSA. <P> </P> Method: Compounds were synthesized by primary N-alkylation to form alkyl acridinium salts that were further functionalized with substituted phenyl residues and finally purified by column chromatography. The antibacterial growth inhibition activity was determined as MIC value. <P> </P> Results: The substituent effects on the determined antibacterial growth inhibitory properties have been discussed. <P> </P> Conclusion: The best activities have been found for compounds with methoxy functions, exceeding the activities of reported novel antibacterial peptides. The compounds have also shown antibacterial drug-enhancing effects, which have been manifested as a reduction in the MIC values of the used antibiotics.

Visible-Light Cross-Linkable Multifunctional Hydrogels Loaded with Exosomes Facilitate Full-Thickness Skin Defect Wound Healing through Participating in the Entire Healing Process.

The management of severe full-thickness skin defect wounds remains a challenge due to their irregular shape, uncontrollable bleeding, high risk of infection, and prolonged healing period. Herein, an all-in-one OD/GM/QCS@Exo hydrogel was prepared with catechol-modified oxidized hyaluronic acid (OD), methylacrylylated gelatin (GM), and quaternized chitosan (QCS) and loaded with adipose mesenchymal stem cell-derived exosomes (Exos). Cross-linking of the hydrogel was achieved using visible light instead of ultraviolet light irradiation, providing injectability and good biocompatibility. Notably, the incorporation of catechol groups and multicross-linked networks in the hydrogels conferred strong adhesion properties and mechanical strength against external forces such as tensile and compressive stress. Furthermore, our hydrogel exhibited antibacterial, anti-inflammatory, and antioxidant properties along with wound-healing promotion effects. Our results demonstrated that the hydrogel-mediated release of Exos significantly promotes cellular proliferation, migration, and angiogenesis, thereby accelerating skin structure reconstruction and functional recovery during the wound-healing process. Overall, the all-in-one OD/GM/QCS@Exo hydrogel provided a promising therapeutic strategy for the treatment of full-thickness skin defect wounds through actively participating in the entire process of wound healing.

Enhanced Crystallinity Behavior of Egg White Mediated h-MoO3 Using Acid Precipitation Method for Improved Anti-Bacterial Properties against Multi Drug Resistant Bacteria

Enhanced Crystallinity Behavior of Egg White Mediated h-MoO3 Using Acid Precipitation Method for Improved Anti-Bacterial Properties against Multi Drug Resistant Bacteria

Development and Application of Intelligent Coating Technology: A Review

Coating technology, as a part of surface engineering, has shown remarkable potential in future industrial applications. With the continuous development and improvement of coating technology, coatings have gradually become an indispensable part of industrial manufacturing, possessing various excellent properties and characteristics, such as superhydrophobicity and self-cleaning, enhanced biological antibacterial properties, and improved corrosion resistance. Intelligent coatings are not only rigid barriers between substrates and the environment but also coatings designed to respond to the environment and improve coating life or achieve certain special functions through this response. Biomimetics is a discipline that studies the structure, function, and behavior of living organisms and applies them to engineering design. Combining bionics with intelligent coating materials can not only improve the performance and functionality of intelligent coatings but also create more intelligent coating materials. This paper includes advanced superhydrophobic intelligent coatings, anticorrosion intelligent coatings, biological antibacterial intelligent coatings, and other intelligent coatings with specific functions. We also provide a detailed overview of the preparation methods and technologies of various representative intelligent coatings, as well as their properties and applications, which will offer some valuable references for the development direction of future intelligent coatings.

Photocatalytic Activity and Antibacterial Properties of Mixed-Phase Oxides on Titanium Implant Alloy Substrates

Titanium alloys are commonly used for implants, but the naturally forming oxides are bioinert and not ideal for bacterial resistance or osseointegration. Anodization processes are a modification technique that can crystallize the oxides, alter oxide surface topography, and introduce beneficial chemistries. Crystalline titanium oxides are known to exhibit photocatalytic activity (PCA) under UVA light. Anodization was used to create mixed-phase oxides on six titanium alloys including commercially pure titanium (CPTi), Ti-6Al-4V (TAV), Ti-6Al-7Nb (TAN), two forms of Ti-15Mo (TiMo-β and TiMo-αβ), and Ti-35Nb-7Zr-5Ta (TNZT). Combined EDS and XPS analyses showed uptake of the electrolyte and substrate alloying elements into the oxides. The relative oxide PCA was measured using methylene blue degradation assays. CPTi and TAN oxides exhibited increased PCA compared to other alloys. Combined XRD and EBSD oxide phase analyses revealed an unfavorable arrangement of anatase and rutile phases near the outermost surfaces, which may have reduced PCA for other oxides. The relative Staphylococcus aureus attachment to each oxide was also assessed. The CPTi and TiMo-αβ oxides showed significantly reduced S. aureus attachment after 1 h of UVA compared to un-anodized CPTi. Cell culture results verified that the UVA irradiation did not negatively influence the MC3T3-E1 attachment or proliferation on the mixed-phase oxides.

Study on the characteristics of Napier grass fibre reinforced porcelain filler particulates poly lactic acid matrix biocomposite

This study investigates the complex properties of a novel biocomposite by a conventional process, which is composed of poly (lactic acid) (PLA) as the matrix, porcelain particles as fillers, and Napier grass fibre as reinforcement. The primary objective was to evaluate the mechanical, crystalline, water absorption, morphological, and antibacterial properties of the biocomposites in relation to the individual components and their synergistic impacts. When 25 g porcelain particles were added to PLA with Napier grass fibre, mechanical tests demonstrated a 25% increase in tensile strength (maximum tensile strength of 39.76 MPa) and a 30% increase in flexural strength (maximum flexural strength of 41.29 MPa). Scanning electron microscopy (SEM) revealed a strong interfacial bond between the fibre and matrix, with porcelain particles serving as bridges to facilitate stress transmission. The biocomposite exhibited reduced water absorption due to the inherent hydrophobic nature of porcelain, which enhances its resistance to bacterial growth. The study demonstrates that combining Napier grass fibre with porcelain filler particles synergistically enhances the properties of PLA, creating a viable biocomposite material suitable for use in packaging, automotive, and sustainable building industries.

Multifunctional coating films of gelatin/d-glucose/agarose reinforced by Piper L. leaf extract: Physicochemical properties and mandarin preservation

Eco-friendly, active, non-toxic coatings have recently been considered as a feasible approach for enhancing the storability of post-harvest produce, which deal with global problem from environmental pollutions of chemical uses and petro-based plastics. In this interest, the present work is to the development of multifunctional coating films through blending gelatin, agarose, d-glucose, and Piper betle L. extract before being applied for preserving ‘Duong’ mandarin. As compared to single addition of agarose, the co-supplement of agarose and d-glucose was considered to be more efficient in revitalizing the mechanical strength and surface hydrophobicity of the neat gelatin, which highlighted a vital role of d-glucose in the polymeric network. Interestingly, gelatin/d-glucose/agarose formulated with Piper betle L. extract showed greater mechanical strength, flexibility, UV-shielding, solubility, antibacterial and antioxidant activities than gelatin/d-glucose/agarose coating films. Considerably, the antibacterial property of such active films/coatings was found to even better after being aged for 30 days at the room temperature (25 °C). Based on initial screening, the gelatin/agarose/d-glucose coating formulation included with 2 % (w/w) Piper betle L. extract presenting the best mechanical strength (2.46 MPa), flexibility (31.03 %), and antioxidant activity (IC50 = 37.45 μg/mL) along with the adequate tested bacterial inhibition, was applied for ready-to-eat mandarin preservation. The significant improvement in visual appearance and peel color was recorded for the mandarin coated with gelatin/agarose/d-glucose/Piper betle L. extract (2 %, w/w) after 17-d storage at 20 °C and 64 %RH, which exhibited the lowest mass loss and total soluble solids.

Nanoarchitectonics of Bactericidal Coatings Based on CaCO3-Nanosilver Hybrids.

Antimicrobial coatings provide protection against microbes colonization on surfaces. This can prevent the stabilization and proliferation of microorganisms. The ever-increasing levels of microbial resistance to antimicrobials are urging the development of alternative types of compounds that are potent across broad spectra of microorganisms and target different pathways. This will help to slow down the development of resistance and ideally halt it. The development of composite antimicrobial coatings (CACs) that can host and protect various antimicrobial agents and release them on demand is an approach to address this urgent need. In this work, new CACs based on microsized hybrids of calcium carbonate (CaCO3) and silver nanoparticles (AgNPs) were designed using a drop-casting technique. Polyvinylpyrrolidone and mucin were used as additives. The CaCO3/AgNPs hybrids contributed to endowing colloidal stability to the AgNPs and controlling their release, thereby ensuring the antibacterial activity of the coatings. Moreover, the additives PVP and mucin served as a matrix to (i) control the distribution of the hybrids, (ii) ensure mechanical integrity, and (iii) prevent the undesired release of AgNPs. Scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier transform infrared (FTIR) techniques were used to characterize the 15 μm thick CAC. The antibacterial activity was determined against Escherichia coli, methicillin-resistant Staphylococcus aureus (MRSA), and Pseudomonas aeruginosa, three bacteria responsible for many healthcare infections. Antibacterial performance of the hybrids was demonstrated at concentrations between 15 and 30 μg/cm2. Unloaded CaCO3 also presented bactericidal properties against MRSA. In vitro cytotoxicity tests demonstrated that the hybrids at bactericidal concentrations did not affect human dermal fibroblasts and human mesenchymal stem cell viability. In conclusion, this work presents a simple approach for the design and testing of advanced multicomponent and functional antimicrobial coatings that can protect active agents and release them on demand.

Development of high barrier poly(l-actic acid)/chitosan/graphene oxide flexible films for meat packaging by layer-by-layer

An new high-barrier packaging films for meat preservation were obtained by depositing graphene oxide (GO) layer-by-layer (LbL) on poly(l-lactic acid)(PLLA)-poly (butylene itaconate) (PBI) copolymers (PLBI) with chitosan (CS) as bonding layer in this study. The 1H NMR results revealed that PLBI copolymer was successful synthesized. The introduction of PBI reduced the Tg and crystallization capacity of PLLA film, which made the copolymer films exhibit extremely high flexibility (up to 186.1% elongation at break). The film also exhibited high hydrophilicity, which was favorable for the effective attachment of CS. With CS as an intermediate layer, the FTIR and SEM results showed that the GO was evenly distributed onto the PLBI film surface due to the electrostatic interaction. The oxygen, water vapor and UV light barrier properties of PLBI/CS/(GO-CS)x films were improved and increased with the GO-CS layers. The PLBI/CS/(GO-CS)10 films, with extremely low oxygen permeability coefficients about 0.4 × 10−8 cm3 m/m2·h·Pa, delayed the increase in weight loss, hardness, pH, TVB-N, TBARS, and total viable counts of chilled meat during storage. It also decreased the discoloration, and loss of springness and cohesiveness of chilled meat caused by long-term refrigeration. The LbL films even showed better freshness-keeping effect than commercial PA/PE films due to its superior barrier and certain antibacterial properties, suggesting great potential application in fresh meat preservation.

Flexible porous nanofibrous sponge with antioxidant and antibacterial characteristics for promoting diabetic wound healing

Excessive reactive oxygen species (ROS) and bacterial burden delay diabetic wound healing. Although antioxidants and antibacterials have the potential to mitigate excessive ROS and bacterial burden, their efficacy is compromised by the presence of abundant exudate. In this study, a porous chitosan/polyvinyl alcohol nanofibrous sponge immobilized with protocatechualdehyde (CPNS-PA) is developed as a flexible dressing. The CPNS-PA exhibits favorable liquid management ability, high liquid absorption capacity (3867.73 %), superior air permeability (281.1 mm/s), and great compressive recovery at a strain of 50 %. Immobilizing protocatechualdehyde endows CPNS-PA with improved antioxidant and antibacterial properties. Besides, to enhance the stability of CPNS-PA in an aqueous environment, heat treatment is employed instead of toxic chemical agents, thereby preserving its excellent cytocompatibility. The experiments conducted on a diabetic mouse wound model demonstrate that CPNS-PA effectively promotes diabetic wound healing, indicating its promising potential for clinical applications in diabetic wound healing.

Advances in contezolid: novel oxazolidinone antibacterial in Gram-positive treatment.

The principal objective of this project was to review and thoroughly examine the chemical characteristics, pharmacological activity, and quantification methods associated with contezolid. The article was based on published and ongoing preclinical and clinical studies on the application of contezolid. These studies included experiments on the physicochemical properties of contezolid, in vitro antimicrobial research, in vivo antimicrobial research, and clinical trials in various phases. There were no date restrictions on these studies. In June 2021, contezolid was approved for treating complicated skin and soft tissue infections. The structural modification of contezolid has resulted in better efficacy compared to linezolid. It inhibits bacterial growth by preventing the production of the functional 70S initiation complex required to translate bacterial proteins. The current evidence has indicated a substantial decline in myelosuppression and monoamine oxidase inhibition without impairing its antibacterial properties. Contezolid was found to have a more significant safety profile and to be metabolised by flavin monooxygenase 5, reducing the risk of harmful effects due to drug-drug interactions. Adjusting doses is unnecessary for patients with mild to moderate renal or hepatic insufficiency. As an oral oxazolidinone antimicrobial agent, contezolid is effective against multi-drug resistant Gram-positive bacteria. The introduction of contezolid provided a new clinical option.