Anti-adhesive Properties Research Articles

Human umbilical cord-derived mesenchymal stem cells and auto-crosslinked hyaluronic acid gel complex for treatment of intrauterine adhesion.

The purpose of this study was to explore the therapeutic characteristics of mesenchymal stem cells generated from human umbilical cord (hUC-MSCs) when utilized in conjunction with auto-crosslinked hyaluronic acid gel (HA-gel) for the management of intrauterine adhesion (IUA). The goal was to see how this novel therapy could enhance healing and improve outcomes for IUA patients. In this study, models of intrauterine adhesion (IUA) were established in Sprague-Dawley (SD) rats, which were then organized and divided into hUC-MSCs groups. The groups involved: hUC-MSCs/HA-gel group, control group, and HA-gel group. Following treatment, the researchers examined the uterine cavities and performed detailed analyses of the endometrial tissues to determine the effectiveness of the interventions. The results indicated that in comparison with to the control group, both HA-gel, hUC-MSCs, and hUC-MSCs/HA-gel groups showed partial repair of IUA. However, in a more notable fashion transplantation of hUC-MSCs/HA-gel complex demonstrated significant dual repair effects. Significant outcomes were observed in the group treated with hUC-MSCs and HA-gel, they showed thicker endometrial layers, less fibrotic tissue, and a higher number of endometrial glands. This treatment strategy also resulted in a significant improvement in fertility restoration, indicating a profound therapeutic effect. The findings of this study suggest that both HA-gel, hUC-MSCs, and hUC-MSCs/HA-gel complexes have the potential for partial repair of IUA and fertility restoration caused by endometrium mechanical injury. Nonetheless, the transplantation of the hUC-MSCs/HA-gel complex displayed exceptional dual healing effects, combining effective anti-adhesive properties with endometrial regeneration stimuli.

Tetraspanin CD9 peptides for membrane disruptive on P. aeruginosa

The rapid development of multidrug-resistant strains and nosocomial P. aeruginosa infections pose a growing threat in the clinical setting. Tetraspanin CD9 peptides has demonstrated the antimicrobial activity against various gram-positive and -negative bacteria. Recently, CD9 peptides have shown anti-adhesion properties against P. aeruginosa isolates. In this study, we investigated the effect of CD9 peptides on the membrane of P. aeruginosa by transmission electron microscopy (TEM). The result shows the CD9 peptides cause disruption of the membrane of P. aeruginosa. In addition to the established antibacterial properties, this work reveals that tetraspanin CD9 peptides, a membrane-disrupting drug, could possibly be used as an additional treatment approach against P. aeruginosa. Future research should incorporate confocal microscopy to locate the bacterial matrix components and distinguish between living and dead P. aeruginosa upon the treatment with CD9 peptides.

Injectable pH‐Responsive CI1040 Delayed‐Release Hydrogel for the Treatment of Tendon Adhesion

AbstractTendon injuries, often leading to debilitating adhesions, pose significant challenges in clinical practice. Conventional treatments have limitations, necessitating novel strategies. Injectable hydrogels, known for their biocompatibility, have shown promise. To enhance their antiadhesive properties, researchers have started incorporating drugs. Existing drug delivery systems often peak in the initial days, falling short during the fibroblast proliferation phase which occurs ≈1 week after injury. In this research, CI1040 is selected as an antiadhesion drug, encapsulated within zeolitic imidazolate framework‐8(ZIF‐8), and incorporated into oxidized hyaluronic acid/N‐carboxyethyl chitosan(OHA/CEC) hydrogel(Gel), resulting in the synthesis of CI1040@ZIF@Gel. This unique pH‐responsive drug release system involves encapsulating CI1040 within ZIF‐8, a substance that degrades under acidic conditions while remaining stable in physiological environments. This system selectively releases the drug during the fibroblast proliferation phase, responding to the localized pH reduction post‐tendon injury. CI1040@ZIF@Gel exerted a 65% inhibition on extracellular signal‐regulated kinase (ERK) phosphorylation, reducing the production of collagen types III (Col III) in the adhesion area by 56%. These results indicate that CI1040@ZIF@Gel can effectively inhibit fibroblast proliferation and adhesion through the interleukin 9 receptor/mitogen‐activated protein kinase/extracellular signal‐regulated kinase(IL9r/MEK/ERK) pathway, while also acting as a physical barrier to prevent the formation of tendon adhesion.

The Effects of Pectin on the Gastrointestinal Tract in Humans

The presented article discusses the complex effect of pectins, especially of citrus origin, on functional and biological processes in the body. The main attention is paid to their structural characteristics, mechanisms of interaction with cells of innate immunity and their potential influence on the development and regulation of inflammatory bowel diseases. The role of methylesterification of pectins in their biological activity is discussed. Reducing the degree of methyl esterification improves the bioavailability of pectins and their interaction with cellular receptors such as Toll-like and galectin-3, which is important for their anti-inflammatory and anti-adhesive properties. Structural modifications of pectins have been shown to directly affect their ability to modulate immune responses and interact with the gut microbiota, which helps to strengthen the intestinal barrier and reduce inflammation. Promising results have been shown by experiments using pectins in diets aimed at treating inflammatory bowel diseases such as non-specific ulcerative colitis and Crohn’s disease. Despite the anti-inflammatory effects found, the full mechanism of action of pectins and their effect on different types of inflammatory cells, such as Th17 and Th1, requires further investigation

Injectable Double Crosslinked Hydrogel-Polypropylene Composite Mesh for Repairing Full-Thickness Abdominal Wall Defects.

Abdominal wall defects are common clinical diseases, and mesh repair is the standard treatment method. The most commonly used polypropylene (PP) mesh in clinical practice has the advantages of good mechanical properties, stable performance, and effective tissue integration effect. However, direct contact between abdominal viscera and PP mesh can lead to severe abdominal adhesions. To prevent this, the development of a hydrogel-PP composite mesh with anti-adhesive properties may be an effective measure. Herein, biofunctional hydrogel loaded with rosmarinic acid is developed by modifying chitosan and Pluronic F127, which possesses suitable physical and chemical properties and commendable in vitro biocompatibility. In the repair of full-thickness abdominal wall defects in rats, hydrogels are injected onto the surface of PP mesh and applied to intraperitoneal repair. The results indicate that the use of hydrogel-PP composite mesh can alleviate abdominal adhesions resulting from traditional PP mesh implantation by decreasing local inflammatory response, reducing oxidative stress, and regulating the fibrinolytic system. Combined with the tissue integration ability of PP mesh, hydrogel-PP composite mesh has great potential for repairing full-thickness abdominal wall defects.

Investigation of anti-adhesion ability of 8-arm PEGNHS-modified porcine pericardium

In post-adhesion surgery, there is a clinical need for anti-adhesion membranes specifically designed for the liver, given the limited efficacy of current commercial products. To address this demand, we present a membrane suitable for liver surgery applications, fabricated through the modification of decellularized porcine pericardium with 20 KDa hexaglycerol octa (succinimidyloxyglutaryl) polyoxyethylene (8-arm PEGNHS). We also developed an optimized modification procedure to produce a high-performance anti-adhesion barrier. The modified membrane significantly inhibited fibroblast cell adherence while maintaining minimal levels of inflammation. By optimizing the modification ratio, we successfully controlled post-adhesion formation. Notably, the 8-arm PEG-modified pericardium with a molar ratio of 5 exhibited the ability to effectively prevent post-adhesion formation on the liver compared to both the control and Seprafilm®, with a low adhesion score of 0.5 out of 3.0. Histological analysis further confirmed its potential for easy separation. Furthermore, the membrane demonstrated regenerative capabilities, as evidenced by the proliferation of mesothelial cells on its surface, endowing anti-adhesion properties between the abdominal wall and liver. These findings highlight the membrane’s potential as a reliable barrier for repeated liver resection procedures that require the removal of the membrane multiple times.

Dual-functional superhydrophobic coatings on biodegradable Mg alloys via nano-SiO2 particles assisted surface modification

In the exploration of next-generation biocompatible implant materials, magnesium (Mg) alloys have great potential due to their inherent biodegradability. The current study delineates the development of dual-functional coatings for Mg alloys, incorporating zinc (Zn) and calcium (Ca), characterized by both anti-bacterial and anti-corrosion attributes. These coatings were synthesized by integrating surface groups of magnesium hydroxide/magnesium oxide with surface atoms of nano‑silicon dioxide (nano-SiO2) particles, leading to the formation of magnesium silicate junctions. Subsequently, these interfacial surfaces were functionalized using organofluorosilanes. With the application of the coating, a notable enhancement in the static contact angle of water from 43.7° ± 1.1° to 158.4° ± 1.3° was observed. The anti-adhesive properties of the coating against bacteria were assessed through inoculation assays with Staphylococcus aureus, a predominant agent of implant-associated infections. No bacterial colonization on the Mg4Zn0.5Ca alloy surface was detected when the dual-functional coatings were applied. While a hydrogen evolution (HE) of 4.78 mL/cm2 was measured on uncoated surfaces, the HE reduced significantly to 0.35 mL/cm2 for coated alloy surfaces. Analysis using Nyquist plots unveiled a polarization resistance of coated surfaces that was an order of magnitude higher than uncoated surfaces. As a result, Mg alloys covered with a dual-functional nanocoating layer demonstrate favorable characteristics, such as diminished corrosion rates and enhanced resistance against bacterial adhesion. Such coatings negate the necessity for subsequent surgical removal of bone implants, consequently mitigating potential bacterial infections and the concomitant medical expenses.

Mechanophysical and Anti-Adhesive Properties of a Nanoclay-Containing PMMA Denture Resin.

Poly(methyl methacrylate) (PMMA) is commonly used for dental dentures, but it has the drawback of promoting oral health risks due to oral bacterial adhesion. Recently, various nanoparticles have been incorporated into PMMA to tackle these issues. This study aims to investigate the mechanophysical and antimicrobial adhesive properties of a denture resin by incorporating of nanoclay into PMMA. Specimens were prepared by adding 0, 1, 2, and 4 wt % surface-modified nanoclay (Sigma) to self-polymerizing PMMA denture resin. These specimens were then evaluated using FTIR, TGA/DTG, and FE-SEM with EDS. Various mechanical and surface physical properties, including nanoindentation, were measured and compared with those of pure PMMA. Antiadhesion experiments were conducted by applying a Candida albicans (ATCC 11006) suspension to the surface of the specimens. The antiadhesion activity of C. albicans was confirmed through a yeast-wall component (mannan) and mRNA-seq analysis. The bulk mechanical properties of nanoclay-PMMA composites were decreased compared to those of pure PMMA, while the flexural strength and modulus met the ISO 20795-1 requirement. However, there were no significant differences in the nanoindentation hardness and elastic modulus. The surface energy revealed a significant decrease at 4 wt % nanoclay-PMMA. The antiadhesion effect of Candida albicans was evident along with nanoclay content in the nanocomposites and confirmed by the reduced attachment of mannan on nanoclay-PMMA composites. mRNA-seq analysis supported overall transcriptome changes in altering attachment and metabolism behaviors on the surface. The nanoclay-PMMA materials showed a lower surface energy as the content increased, leading to an antiadhesion effect against Candida albicans. These findings indicate that incorporating nanoclay into PMMA surfaces could be a valuable strategy for preventing the fungal biofilm formation of denture base materials.

Antimicrobial, anti-adhesive, and anti-invasive effects of condition media derived from adipose mesenchymal stem cells against Shigella flexneri.

The objective of the current study was to examine the antimicrobial, anti-adhesion, and anti-invasion properties of various concentrations of condition media obtained from adipose mesenchymal stem cells (AD-MSCs CM) against Shigella flexneri (S. flexneri). AD-MSCs characterization and antimicrobial assay were performed using flow cytometry and microdilution by colony counting, respectively. For evaluating adhesion and invasion, Caco-2 cells were infected by S. flexneri at three different multiplicities of infection (MOIs of 1, 10, and 50) and then treated with DMEM medium and AD-MSCs CM. The inhibitory effect of AD-MSCs CM was assessed after 24 and 48 h of treatment by CFU (colony-forming unit) counting. A total of 84, 65, and 56% reduction in the adhesion rate of S. flexneri to Caco-2 cells treated with AD-MSCs CM were observed at MOIs of 1, 10, and 50, respectively. While S. flexneri at MOI:1 had no invasive effect on Caco-2 cells, convincing invasion was detected at MOIs of 10 and 50, showing a significant decrease following treatment with AD-MSCs CM. The current study results open new insights into AD-MSCs CM as a new non-antibiotic therapeutic candidate for S. flexneri infections.

Visible-light photoactivated proanthocyanidin and kappa-carrageenan coating with anti-adhesive properties against clinically relevant bacteria

The increase of bacterial resistance to antibiotics is a growing concern worldwide and the search for new therapies could cost billions of dollars and countless lives. Inert surfaces are major sources of contamination due to easier adhesion and formation of bacterial biofilms, hindering the disinfection process. Therefore, the objective of this study was to develop a photoactivatable and anti-adhesive kappa-carrageenan coating using proanthocyanidin as a photosensitizer. The complete reduction (>5-log10 CFU/cm3) of culturable cells of Staphylococcus aureus, Escherichia coli and Pseudomonas aeruginosa pathogens was achieved after 30 min of exposure to visible light (420 nm; 30 mW/cm2) with 5 % (w/v) of the photosensitizer. Cell membrane damage was confirmed by measuring potassium leakage, epifluorescence microscopy and bacterial motility analysis. Overall, visible light irradiation on coated solid surfaces mediated by proanthocyanidin showed no cytotoxicity and inactivated clinically important pathogens through the generation of reactive oxygen species, inhibiting bacterial initial adhesion. The developed coating is a promising alternative for a wide range of applications related to surface disinfection and food biopreservation.

Multifunctional scaffolds for biomedical applications: Crafting versatile solutions with polycaprolactone enriched by graphene oxide.

The pressing need for multifunctional materials in medical settings encompasses a wide array of scenarios, necessitating specific tissue functionalities. A critical challenge is the occurrence of biofouling, particularly by contamination in surgical environments, a common cause of scaffolds impairment. Beyond the imperative to avoid infections, it is also essential to integrate scaffolds with living cells to allow for tissue regeneration, mediated by cell attachment. Here, we focus on the development of a versatile material for medical applications, driven by the diverse time-definite events after scaffold implantation. We investigate the potential of incorporating graphene oxide (GO) into polycaprolactone (PCL) and create a composite for 3D printing a scaffold with time-controlled antibacterial and anti-adhesive growth properties. Indeed, the as-produced PCL-GO scaffold displays a local hydrophobic effect, which is translated into a limitation of biological entities-attachment, including a diminished adhesion of bacteriophages and a reduction of E. coli and S. aureus adhesion of ∼81% and ∼69%, respectively. Moreover, the ability to 3D print PCL-GO scaffolds with different heights enables control over cell distribution and attachment, a feature that can be also exploited for cellular confinement, i.e., for microfluidics or wound healing applications. With time, the surface wettability increases, and the scaffold can be populated by cells. Finally, the presence of GO allows for the use of infrared light for the sterilization of scaffolds and the disruption of any bacteria cell that might adhere to the more hydrophilic surface. Overall, our results showcase the potential of PCL-GO as a versatile material for medical applications.

High-density zwitterionic polymer brushes exhibit robust lubrication properties and high antithrombotic efficacy in blood-contacting medical devices

High-performance catheters are essential for interventional surgeries, requiring reliable anti-adhesive and lubricated surfaces. This article develops a strategy for constructing high-density sulfobetaine zwitterionic polymer brushes on the surface of catheters, utilizing dopamine and sodium alginate as the primary intermediate layers, where dopamine provides mussel-protein-like adhesion to anchor the polymer brushes to the catheter surface. Hydroxyl-rich sodium alginate increases the number of grafting sites and improves the grafting mass by more than 4 times. The developed high-density zwitterionic polymer brushes achieve long-lasting and effective lubricity (μ<0.0078) and are implanted in rabbits for four hours without bio-adhesion and thrombosis in the absence of anticoagulants such as heparin. Experiments and molecular dynamics simulations demonstrate that graft mass plays a decisive role in the lubricity and anti-adhesion of polymer brushes, and it is proposed to predict the anti-adhesion of polymer brushes by their lubricity to avoid costly and time-consuming bioassays during the development of amphoteric polymer brushes. A quantitative influence of hydration in the anti-adhesion properties of amphiphilic polymer brushes is also revealed. Thus, this study provides a new approach to safe, long-lasting lubrication and anticoagulant surface modification for medical devices in contact with blood. Statement of significanceHigh friction and bioadhesion on medical device surfaces can pose a significant risk to patients. In response, we have developed a safer, simpler, and more application-specific surface modification strategy that addresses both the lubrication and anti-bioadhesion needs of medical device surfaces. We used dopamine and sodium alginate as intermediate layers to drastically increase the grafting density of the zwitterionic brushes and enabled the modified surfaces to have an extremely low coefficient of friction (μ = 0.0078) and to remain non-bioadhesive for 4 hours in vivo. Furthermore, we used molecular dynamics simulations to gain insight into the mechanisms behind the superior anti-adhesion properties of the high-density polymer brushes. Our work contributes to the development and application of surface-modified coatings.

Partial Cranial Reconstruction Using Titanium Mesh after Craniectomy: An Antiadhesive and Protective Barrier with Improved Aesthetic Outcomes

ObjectiveDescribe a new, safe, technique that uses titanium mesh to partially cover skull defects immediately after decompressive craniectomy. MethodsThis study is a retrospective review of eight patients who underwent decompressive craniectomy and placement of a titanium mesh. The mesh partially covered the defect and was placed between the temporalis muscle and the dura graft. The muscle was sutured to the mesh. All patients underwent cranioplasty at a later time. The study recorded and analyzed demographic information, time between surgeries, extra-axial fluid collections, postoperative infections, need for reoperation, cortical hemorrhages, and functional and aesthetic outcomes. ResultsAfter craniectomy, all patients underwent cranioplasty within an average of 112.5 days (30-240 days). One patient reported temporalis muscle atrophy, which was the only complication observed. During the cranioplasties, no adhesions were found between temporalis muscle, titanium mesh, and underlying dura. None of the patients showed complications in the follow-up computerized tomography (CT) scans. All patients had favorable aesthetic and functional results. ConclusionsPlacing a titanium mesh as an extra step during decompressive craniectomy could have anti-adhesive and protective properties, facilitating subsequent cranioplasty by preventing adhesions and providing a clear surgical plane between the temporalis muscle and intracranial tissues. This technique also helps preserve the temporalis muscle and enhances functional and aesthetic outcomes post-cranioplasty. Therefore, it represents a safe alternative to other synthetic anti-adhesive materials. Further studies are necessary to draw definitive conclusions and elucidate long-term outcomes, however, the results obtained hold great promise for the safety and efficacy of this technique.

Antiadhesive Hyaluronic Acid-Based Wound Dressings Promote Wound Healing by Preventing Re-Injury: An In Vivo Investigation.

Wound dressings are widely used to protect wounds and promote healing. The water absorption and antifriction properties of dressings are important for regulating the moisture balance and reducing secondary damages during dressing changes. Herein, we developed a hyaluronic acid (HA)-based foam dressing prepared via the lyophilization of photocrosslinked HA hydrogels with high water absorption and antiadhesion properties. To fabricate the HA-based foam dressing (HA foam), the hydroxyl groups of the HA were modified with methacrylate groups, enabling rapid photocuring. The resulting photocured HA solution was freeze-dried to form a porous structure, enhancing its exudate absorption capacity. Compared with conventional biopolymer-based foam dressings, this HA foam exhibited superior water absorption and antifriction properties. To assess the wound-healing potential of HA foam, animal experiments involving SD rats were conducted. Full-thickness defects measuring 2 × 2 cm2 were created on the skin of 36 rats, divided into four groups with 9 individuals each. The groups were treated with gauze, HA foam, CollaDerm®, and CollaHeal® Plus, respectively. The rats were closely monitored for a period of 24 days. In vivo testing demonstrated that the HA foam facilitated wound healing without causing inflammatory reactions and minimized secondary damages during dressing changes. This research presents a promising biocompatible foam wound dressing based on modified HA, which offers enhanced wound-healing capabilities and improved patient comfort and addresses the challenges associated with conventional dressings.

Comparative evaluation of the effect of 2% graphene oxide and 5% hydroxyapatite nanoparticles in isolation and in combination on micro tensile bond strength of 5th generation adhesive

Background Graphene is the thinnest, strongest, and stiffest imaginable material. The biocompatible property of graphene oxide can initiate and facilitate cell adhesion, proliferation, and differentiation of periodontal ligament, osteogenic, and oral epithelial cells. Furthermore, the antibiofilm and anti-adhesion properties of graphene oxide in the prevention of dental biofilm infections, dental caries, and dental erosion as well as for implant surface modification and as an anti-quorum sensing agent. Composites are the most often utilized materials for restoration in the field of dentistry due to adhesive resins' improved mechanical and cosmetic properties. To safeguard the dentin and prevent dental cavities, dentin adhesives are utilized to affix hydrophobic resin composites to hydrophilic dentin tissue. Materials and Method Dental adhesives have a harder time adhering to dentin because it contains more water and is less mineralized than enamel. This makes the method more sensitive. Result As a result, it was chosen to assess and contrast the impact of 5% Hydroxyapatite nanoparticles and 2% Graphene oxide nanoparticles, both separately and together, on the Micro tensile bond strength of 5th generation adhesive. Conclusion Graphene oxide is the most versatile form of Graphite in structural and functional configuration. Graphene oxide possesses extraordinary physical, chemical, optical, electrical and mechanical properties. Among the graphene family nanomaterials, the reduced form of Graphite adding the oxygenated functional group to the structure increases the surface area and therefore exhibits enviable excellent interaction ability with metal and ions as well as organic species. Graphene oxide in dentistry has provided outstanding results in antimicrobial action, regenerative dentistry, bone tissue engineering, drug delivery, physicochemical properties, enhancement of dental biomaterials and oral cancer treatment.

Designing a bi-layer multifunctional hydrogel patch based on polyvinyl alcohol, quaternized chitosan and gallic acid for abdominal wall defect repair

In abdominal wall defect repair, surgical site infection (SSI) remains the primary cause of failure, while complications like visceral adhesions present significant challenges following patch implantation. We designed a Janus multifunctional hydrogel patch (JMP) with antibacterial, anti-inflammatory, and anti-adhesive properties. The patch comprises two distinct layers: a pro-healing layer and an anti-adhesion layer. The pro-healing layer was created by a simple mixture of polyvinyl alcohol (PVA), quaternized chitosan (QCS), and gallic acid (GA), crosslinked to form PVA/QCS/GA (PQG) hydrogels through GA's self-assembly effect and hydrogen bonding. Additionally, the PVA anti-adhesive layer was constructed using a drying-assisted salting method, providing a smooth and dense physical barrier to prevent visceral adhesion while offering essential mechanical support to the abdominal wall. The hydrogel patch demonstrates widely adjustable mechanical properties, exceptional biocompatibility, and potent antimicrobial properties, along with a sustained and stable release of antioxidants. In rat models of skin and abdominal wall defects, the JMP effectively promoted tissue healing by controlling infection, inhibiting inflammation, stimulating neovascularization, and successfully preventing the formation of visceral adhesions. These compelling results highlight the JMP's potential to improve the success rate of abdominal wall defect repair and reduce surgical complications.

Cross-linked poly(vinyl alcohol)/citric acid electrospun fibers containing imidazolium ionic liquid with enhanced antiadhesive and antimicrobial properties

Patients in hospital environments are susceptible to bacterial colonization, which can lead to infections. In this study, electrospun fibers were manufactured using poly(vinyl alcohol) (PVA) crosslinked with citric acid (CA) and incorporating the ionic liquid (IL) 1-hexadecyl-3-methylimidazolium chloride (C16MImCl) to prevent microbial growth and biofilm formation. The presence of CA and IL reduced the surface tension of the PVA solution (12% w/v) from 52.07 mN/m to 35.84 mN/m. CA was introduced into PVA solutions, and the resulting fibers were thermally crosslinked through esterification between PVA hydroxyl groups and CA. X-ray photoelectron spectroscopy (XPS) confirmed the presence of IL on the fiber surfaces. The IL acted as a surfactant, imparting plasticity to the electrospun fibers and enhancing homogeneity and mechanical properties. Before crosslinking, the PVA/CA/IL fibers exhibited an elongation at break (%) of approximately 140%, a tensile strength of 5.3 MPa, and an elastic modulus of 18.2 MPa. After cross-linking, the elongation at break reduced to 86%, the tensile strength increased to 7.6 MPa, and the elastic modulus increased to 88 MPa. Mechanical measurements confirmed the thermal crosslinking of the fibers, primarily because of the increased elastic modulus. Adhesion and proliferation tests with Staphylococcus aureus (S. aureus) and Pseudomonas aeruginosa (P. aeruginosa) indicated reduced bacterial adhesion and growth on the PVA/CA/IL fibers. Antimicrobial assays further confirmed a 50.73% and 69.42% increase in bactericidal activity against S. aureus and P. aeruginosa, respectively. The PVA/CA/IL fibers exhibit promising potential for producing antimicrobial materials to prevent the attachment and proliferation of microbial strains on solid surfaces.

Adhesion and Contact Aging of Acrylic Pressure-Sensitive Adhesives to Swollen Elastomers.

Fluid-infused (or swollen) elastomers are known for their antiadhesive properties. The presence of excess fluid at their surface is the main contributor to limiting contact formation and minimizing adhesion. Despite their potential, the mechanisms for adhesion and contact aging to fluid-infused elastomers are poorly understood beyond contact with a few materials (ice, biofilms, glass). This study reports on adhesion to a model fluid-infused elastomer, poly(dimethylsiloxane) (PDMS), swollen with silicone oil. The effects of oil saturation, contact time, and the opposing surface are investigated. Specifically, adhesion to two different adherents with comparable surface energies but drastically different mechanical properties is investigated: a glass surface and a soft viscoelastic acrylic pressure-sensitive adhesive film (PSA, modulus ∼25 kPa). Adhesion between the PSA and swollen PDMS [with 23% (w/w) silicone oil] retains up to 60% of its value compared to contact with unswollen (dry) PDMS. In contrast, adhesion to glass nearly vanishes in contact with the same swollen elastomer. Adhesion to the PSA also displays stronger contact aging than adhesion to glass. Contact aging with the PSA is comparable for dry and unsaturated PDMS. Moreover, load relaxation when the PSA is in contact with the PDMS does not correlate with contact aging for contact with the dry or unsaturated elastomer, suggesting that contact aging is likely caused by chain interpenetration and polymer reorganization within the contact region. Closer to full saturation of the PDMS with oil, adhesion to the PSA decreases significantly and shows a delay in the onset of contact aging that is weakly correlated to the poroelastic relaxation of the elastomer. Additional confocal imaging suggests that the presence of a layer of fluid trapped at the interface between the two solids could explain the delayed (and limited) contact aging to the oil-saturated PDMS.

Effect of different exposure time of papain on adhesion and some reproductive indices of &lt;i&gt;Clarias gariepinus&lt;/i&gt; (Burchell, 1822) eggs under semi-arid environment of Sokoto, north-western, Nigeria

Egg adhesiveness can cause major problems affecting the hatchability of Clarias gariepinus. However, appropriate media for de-adhesion in Catfish eggs is not yet well established. In this study, the effect of the anti-adhesion properties of Papain enzyme (extracted from pawpaw fruit peel) on Clarias eggs was investigated in terms of non-stickiness of eggs, fertilization rates hatchability and fry survival. Milt and eggs obtained from African Catfish broodstock of the same lineage were used for induced breeding following standard procedure. 4g of eggs were subjected to four (4) different exposure times of Papain – 30, 60, 120 and 300 seconds – and compared against a control. Treatment efficacy was assessed by comparing the percentage of non-sticky eggs, fertilization, hatching and survival rate in the treatments and control. Exposure time of 30 seconds was found to be most effective in preventing adhesiveness in the eggs. Also, eggs subjected to 30, 120 and 300 seconds of papain exposure had the best hatchability (50.58±1.84, 53.91±4.53, 59.21±2.97). Survival rate was similar among the treatments and control, except for exposure time of 300 (81.66±7.15) seconds with significantly lower survival rate. For effective hatchability and survival of Clarias gariepinus eggs, exposure to papain at 120 seconds is recommended.

Multi-functional composite dressings with sustained release of MSC-SLP and anti-adhesion property for accelerating wound healing

Exudate management is of significant clinical value for the treatment of acute wound. Various wound dressings have been developed to restore the function of injured tissues and promote wound healing, but proper exploiting the healing factors inside exudate and achieving anti-adhesion wound care remains a challenge. Herein, we present a novel multi-functional composite dressing (MCD) by coupling supernatant lyophilized powder of mesenchymal stem cells (MSC-SLP) with a sandwich-structured wound dressing (SWD). The developed MCDs demonstrated unique unidirectional drainage capability, stable anti-adhesion characteristics, and improved wound healing performance. The designed SWD with both superhydrophobic inner surface and liquid-absorption ability of mid layer enables the dressings exhibit desired anti-adhesion property to neoformative granulation tissues, favorable shielding effect to exogenous bacteria, as well as appropriate exudate-retaining capability and unidirectional exudate-absorption property. The introduction of MSC-SLP in SWD was demonstrated to further improve wound healing quality. Compared to medical gauze, the synergic effect of SWD and MSC-SLP significantly accelerates wound healing rate by over 30%, avoids tissue avulsion when changing dressings, and produces a flat-smooth closure surface. More importantly, the wound treated with MCDs presents more skin accessory organs and blood vessels in regenerated tissues than other groups. In vivo/vitro biocompatibility evaluations indicated little toxicity, demonstrating the biosecurity of the developed dressings. The proposed method offers great potential in clinical applications particularly for chronic wound treatments.