Anthropogenic Particles Research Articles

Copper Adsorption to Microplastics and Natural Particles in Seawater: A Comparison of Kinetics, Isotherms, and Bioavailability.

The growing use of plastics has led to microplastics (MPs) being ubiquitously distributed in marine environments. Although previous studies have emphasized MPs as important metal-transport vectors, few have considered the differences between these anthropogenic particles and their coexisting natural counterparts in sequestering metals in seawater. Here, we compared Cu adsorption to pristine and naturally aged MPs (polystyrene and polyethylene) with that to algae particles and sediments and assessed the bioavailability of the adsorbed Cu by a gut juice extraction assay. Adsorption kinetics and isotherms consistently showed that natural particles bound far more Cu to their surfaces than MPs. The rougher surfaces, greater specific surface areas, and lower ζ-potentials of natural particles contributed to their stronger Cu adsorption capacity than pristine or aged MPs. Natural particles also contained more diverse functional groups for binding Cu, with oxygen-containing groups playing a dominant role. Adsorbed Cu on natural particles was less extractable by sipunculan gut juice than that on MPs, indicating their higher Cu affinity. Overall, our study suggests that natural particles outcompete MPs in carrying metals in the water column and transferring them to marine organisms in today's environmental context. This work provides new insights for assessing the risks of MPs in marine environments.

Lead Isotope Evidence for Enhanced Anthropogenic Particle Transport to the Himalayas during Summer Months.

The Indo-Gangetic Plain (IGP) is one of the most highly polluted regions of the world, yet the temporal pattern of transport of anthropogenic aerosols from this region to the Himalayas is poorly constrained. On the basis of the seasonal variation of planetary boundary layer heights, air mass back trajectory analysis, and year-long time-series data for 208Pb/204Pb, 207Pb/204Pb, 206Pb/204Pb, and 143Nd/144Nd from aerosols collected over a high-altitude station, we demonstrate that anthropogenic Pb transport to the glacierized catchment has a seasonal pattern. The Pb isotope data reveal that during winter, the thinned boundary layer traps up to 10 ± 7% more coal-derived Pb in the IGP. In contrast, in nonwinter months, a thicker boundary layer and enhanced subtropical westerly winds result in efficient Pb transport to the Himalayas. As Pb isotope ratios are robust conservative chemical tracers and Pb is predominantly derived from anthropogenic sources, these observations suggest that enhanced transport of anthropogenic aerosols to the glacierized catchment of the Himalayas coincides with higher near-surface temperatures in the summer, creating positive feedback that enhances melting. Our results further suggest that >50% of Pb in the Himalayan aerosols originates from the resuspension of historic Pb derived from phased out leaded gasoline, highlighting the importance of legacy Pb stored in the Indo-Gangetic Plains.

Assessment of the impact of aquaculture facilities on transplanted mussels (Mytilus galloprovincialis): Integrating plasticizers and physiological analyses as a biomonitoring strategy

The growing plastic production and its continuous use is a significant problem. In addition, aquaculture practices have experienced a considerable growth and plastic is widely used in these activities, hence plasticizers must be considered due to their potential ecotoxicological impacts on species. Mussels placed inside an Integrated Multi-Trophic Aquaculture (IMTA) system and at two control locations were employed to quantify the ingestion of anthropogenic particles and associated chemical plasticizers, such as bisphenol A (BPA) jointly to bisphenol F (BPF) and bisphenol S (BPS), and phthalates represented by diethyl phthalate (DEP), dibutyl phthalate (DBP) and bis(2-ethylhexyl) phthalate (DEHP). In addition, some metabolism and oxidative stress related parameters were measured in mussels’ whole soft tissue. Anthropogenic particle ingestion of mussels increased over time at the three locations and the following order of abundance of pollutants was observed: BPA> BPF> DEHP> DBP> BPS> DEP. Even though no differences according to location were found for pollutants’ occurrence, time trends were evidenced for BPA and DEHP. On the other hand, a location effect was observed for biomarkers with highest values detected in mussels located at the vicinities of the aquaculture facility. In addition, a reduced detoxification activity was observed over time parallel to BPA decrease.

Aerosol optical properties derived from POLDER-3/PARASOL (2005–2013) over the Western Mediterranean Sea – Part 2: Spatial distribution and temporal variability

Abstract. The Mediterranean atmosphere is impacted by a variety of natural and anthropogenic aerosols which exert a complex and variable pressure on the regional climate and air quality. This study focuses on the Western Mediterranean Sea (west of longitude 20∘ E) using the full POLarization and Directionality of the Earth's Reflectances version 3 (POLDER-3)/Polarization & Anisotropy of Reflectances for Atmospheric Sciences coupled with Observations from a Lidar (PARASOL) aerosol data record derived from the operational clear-sky ocean algorithm (collection 3) available from March 2005 to October 2013. This 8.5-year satellite data set includes retrievals at 865 nm of the total, fine-, and coarse-mode aerosol optical depth (AOD, AODF, and AODC, respectively), Ångström exponent (AE), and the spherical/non-spherical partition of the coarse-mode AOD (AODCS and AODCNS, respectively), that have been carefully validated over the study region (Formenti et al., 2018). Here, we analyze the spatial distribution, the seasonal cycle, and interannual variability of this ensemble of advanced aerosol products in three latitude bands (34–38, 38–42, and > 42∘ N) and for three sites (Ersa, Barcelona, Lampedusa) distributed on the western basin. POLDER-3 retrieves the high influence of north African desert dust over the region, which largely controls the spatial distributions (south-to-north decreasing gradient) and seasonal cycles (spring/summer maximum) of both AOD and coarse AOD, including its non-spherical component. In contrast, the coarse spherical component of AOD remains relatively homogenously low all year long over the region, whereas fine-mode AODs are generally more elevated in the eastern part of the region of study, especially north of the Adriatic Sea. From 2005 to 2013, annual POLDER-3 AOD evolution shows a decreasing trend of 0.0030 yr−1 in absolute value at 865 nm (0.0060 yr−1 at 550 nm). Such a downward evolution is much more pronounced and spatially extended for AODF (−0.0020 yr−1 at 865 nm) than for AODC. Our analysis also suggests that the North Atlantic Oscillation (NAO) index explains a significant part of the interannual variability of POLDER-3 AODC, reflecting its role on the frequency of Saharan dust transport over the region. Finally, the POLDER-3 data set highlights an improvement of air quality related to the fine aerosol component, with a marked evolution toward more frequent occurrence of clean conditions (≥ 75 % of daily AODF-865 nm<0.05) at the end of the period of study (2010–2013) over most of the Western Mediterranean Sea, and much less evidence of such a large-scale evolution for the coarse fraction. Therefore, despite the high and variable influence of mostly natural north African dust over the region, the POLDER-3 advanced aerosol data set appears sufficiently accurate to successfully resolve the concurrent downward trend of fine, primarily anthropogenic particles, most likely related to reduced emissions in the surrounding European countries.

Chemical, Biological and Morphological Properties of Fine Particles during Local Rice Straw Burning Activities.

Rice straw is commonly burned openly after harvesting in Malaysia and many other Asian countries where rice is the main crop. This operation emits a significant amount of air pollution, which can have severe consequences for indoor air quality, public health, and climate change. Therefore, this study focuses on determining the compositions of trace elements and the morphological properties of fine particles. Furthermore, the species of bacteria found in bioaerosol from rice burning activities were discovered in this study. For morphological observation of fine particles, FESEM-EDX was used in this study. Two main categories of particles were found, which were natural particles and anthropogenic particles. The zinc element was found during the morphological observation and was assumed to come from the fertilizer used by the farmers. ICP-OES identifies the concentration of trace elements in the fine particle samples. A cultured method was used in this study by using nutrient agar. From this study, several bacteria were identified: Exiguobavterium indicum, Bacillus amyloliquefaciens, Desulfonema limicola str. Jadabusan, Exiguobacterium acetylicum, Lysinibacillus macrolides, and Bacillus proteolyticus. This study is important, especially for human health, and further research on the biological composition of aerosols should be conducted to understand the effect of microorganisms on human health.

Airborne particle accumulation and loss in pollution-tolerant lichens and its magnetic quantification

Pollution-tolerant lichens are recognized ecological indicators of air pollution in cities, which can also collect airborne anthropogenic particles in their tissues. Harmful (sub)micron-sized magnetites are a ubiquitous component of air particle pollution, adversely impacting human health. In this work, in situ magnetic susceptibility κis of well-characterized ultrafine magnetite and lichen thalli were measured to quantify the amount of airborne magnetic particles (AMP) after calibration and to assess the lichen's decontamination over time. Up to 2850 magnetic measurements were carried out in twenty-nine transplanted lichens (collected in urban and clean areas) from winter 2020 to winter 2021. Before the transplants, their initial κis values were 0.23–9.45 × 10−5 SI, representing AMP contents of 0.1–4.6 mg in lichen thalli. After lichens were transplanted to a shared site, the magnetic signals evidenced short-term increases and long-term decreases. After three, five and nine months, the AMP loss is more pronounced for transplanted lichens from polluted (e.g., AMP_5-months loss = 0.59 mg) than clean (= 0.08 mg) sites. Rainfall influenced the lichen's decontamination between seasons. In situ measurements and lichens offer a valued and time-saving methodology for biomonitoring harmful airborne particles simply and effectively.

Microplastic contamination in Great Lakes fish.

Freshwater ecosystems, generally adjacent to human population and more contaminated relative to adjacent marine ecosystems, are vulnerable to microplastic contamination. We sampled 7 species of fish from Lake Ontario and Lake Superior and assessed their gastrointestinal (GI) tracts to quantify ingested microplastics and other anthropogenic particles. A subset of the microparticles were chemically analyzed to confirm polymer types and anthropogenic origins. We documented the highest concentration of microplastics and other anthropogenic microparticles ever reported in bony fish. We found 12,442 anthropogenic microparticles across 212 fish (8 species) from nearshore Lake Ontario, 943 across 50 fish (1 species) from Humber River, and 3094 across 119 fish (7 species) from Lake Superior. Fish from Lake Ontario had the greatest mean abundance of anthropogenic microparticles in their GI tracts (59 particles/fish [SD 104]), with up to 915 microparticles in a single fish. Fish from Lake Superior contained a mean [SD] of 26 [74] particles/fish, and fish from Humber River contained 19 [14] particles/fish. Most particles were microfibers. Overall, ≥90% of particles were anthropogenic, of which 35-59% were microplastics. Polyethylene (24%), polyethylene terephthalate (20%), and polypropylene (18%) were the most common microplastics. Ingestion of anthropogenic particles was significantly different among species within Lake Ontario (p < 0.05), and the abundance of anthropogenic particles increased as fish length increased in Lake Ontario (ρ = 0.62). Although we cannot extrapolate the concentration of microplastics in the water and sediments of these fish, the relatively high abundance of microplastics in the GI tracts of fish suggests environmental exposure may be above threshold concentrations for risk.

Microplastics and other anthropogenic particles in Antarctica: Using penguins as biological samplers

Microplastics (< 5 mm in size) are known to be widespread in the marine environment but are still poorly studied in Polar Regions, particularly in the Antarctic. As penguins have a wide distribution around Antarctica, three congeneric species: Adélie (Pygoscelis adeliae), chinstrap (Pygoscelis antarcticus) and gentoo penguins (Pygoscelis papua) were selected to evaluate the occurrence of microplastics across the Antarctic Peninsula and Scotia Sea. Scat samples (used as a proxy of ingestion), were collected from breeding colonies over seven seasons between 2006 and 2016. Antarctic krill (Euphausia superba), present in scat samples, contributed 85%, 66% and 54% of the diet in terms of frequency of occurrence to the diet of Adélie, gentoo and chinstrap penguins, respectively. Microplastics were found in 15%, 28% and 29% scats of Adélie, chinstrap and gentoo penguin respectively. A total of 92 particles were extracted from the scats (n = 317) and 32% (n = 29) were chemically identified via micro-Fourier Transform Infrared Spectroscopy (μ-FTIR). From all the particles extracted, 35% were identified as microplastics, particularly polyethylene (80%) and polyester (10%). It was not possible to ascertain the identification of the remaining 10% of samples. Other anthropogenic particles were identified in 55% of samples, identified as cellulose fibres. The results show a similar frequency of occurrence of particles across all colonies, suggesting there is no particular point source for microplastic pollution in the Scotia Sea. Additionally, no clear temporal variation in the number of microplastics in penguins was observed. Overall, this study reveals the presence of microplastics across Antarctica, in three penguin species and offers evidence of other anthropogenic particles in high numbers. Further research is needed to better understand the spatio-temporal dynamics, fate and effect of microplastics on these ecosystems, and improve plastic pollution policies in Antarctica.

Urban Stormwater Runoff: A Major Pathway for Anthropogenic Particles, Black Rubbery Fragments, and Other Types of Microplastics to Urban Receiving Waters

Stormwater runoff has been suggested to be a significant pathway of microplastics to aquatic habitats; yet, few studies have quantified microplastics in stormwater. Here, we quantify and characteri...

Anthropogenic particles (including microfibers and microplastics) in marine sediments of the Canadian Arctic

We report the first Canadian Arctic-wide study of anthropogenic particles (APs, >125 μm), including microfibers (synthetic, semi-synthetic and anthropogenically modified cellulose) and microplastics, in marine sediments from 14 sites. Samples from across the Canadian Arctic were collected between 2014 and 2017 from onboard the CCGS Amundsen. Samples were processed using density separation with calcium chloride (CaCl2). APs >125 μm were identified and a subset (22%) were characterized using Raman spectroscopy. Following blank-correction, microfiber numbers were corrected using Raman data in a novel approach to subtract possible “natural” cellulose microfibers with no anthropogenic signal via Raman spectroscopy, to estimate the proportion of cellulose microfibers that are of confirmed anthropogenic origin. Of all microfibers examined by Raman spectroscopy, 51% were anthropogenic cellulose, 11% were synthetic polymers, and 7% were extruded fibers emitting a dye signal. The remaining 31% of microfibers were identified as cellulosic but could not be confirmed as anthropogenic and thus were excluded from the final concentrations. Concentrations of confirmed APs in sediments ranged from 0.6 to 4.7 particles g−1 dry weight (dw). Microfibers comprised 82% of all APs, followed by fragments at 15%. Total microfiber concentrations ranged from 0.4 to 3.2 microfibers g−1 dw, while microplastic (fragments, foams, films and spheres) concentrations ranged from 0 to 1.6 microplastics g−1 dw. These concentrations may exceed those recorded in urban areas near point sources of plastic pollution, and indicate that the Canadian Arctic is a sink for APs, including anthropogenic cellulose fibers. Overall, we provide an important benchmark of AP contamination in Canadian Arctic marine sediments against which to measure temporal trends, including the effects of source reduction strategies and climate change, both of which will likely alter patterns of accumulation of anthropogenic particles.

Editorial: Biogeochemistry of Anthropogenic Particles

The collection of articles published in the Research Topic Biogeochemistry of Anthropogenic Particles in Frontiers in Environmental Science has provided a comprehensive perspective on the biogeochemical cycle of anthropogenic particles in the environment with an emphasis on nano- and microscale materials.

Ecotoxicological assessment of suspended solids: The importance of biofilm and particle aggregation.

Assessment of microplastic impacts in biota is challenging due to the complex behavior of the test particles and their interactions with other particulates, including microorganisms, in the environment. To disentangle responses to microplastic exposure from those to other suspended solids, both microplastic and natural particles must be present in the test system. We evaluated how microplastic, non-plastic particles, and biofilms interacted in their effects on survivorship using acute toxicity assay with Daphnia magna. The animals were exposed to microplastic and kaolin at different concentrations of suspended solids (SS; 10, 100, and 1000mg/L) with a varying microplastic contribution (%MP; 0-80%) and biofilm (presence/absence) associated with the solids. Also, we examined how these exposure parameters (SS, %MP, and Biofilm) affected aggregate formation that was analyzed using particle size distribution data. Under the exposure conditions, Daphnia mortality was primarily driven by SS concentration but ameliorated by both microplastic and biofilm. The ameliorating effects were related to increased particle aggregation in the presence of biofilm and high %MP. In addition, a weak yet significant positive effect of the biofilm on the survivorship was observed, presumably, due to microbial food supply to the daphniids in the exposure system; the bacteria were utilized at the absence of other food. Therefore, the effects of both natural and anthropogenic particulates depend on the particle behavior and aggregation in the water governed by microbial communities and physicochemical properties of the particles, which must be taken into account in the hazard assessment of plastic litter.

Negative impacts of realistic doses of spherical and irregular microplastics emerged late during a 42weeks-long exposure experiment with blue mussels.

Microplastics have been found in all compartments of the environment, and numerous life forms are known to take up the anthropogenic particles. Marine filter feeders are particularly susceptible to ingest suspended microplastics, but long-term studies on the potential effects of this uptake are scarce. We exposed juvenile Mytilus spp. to environmentally realistic doses of irregularly shaped polyvinylchloride (PVC) particles (15, 1500, 15,000, 150,000, 1,500,000 particles/individual/week calibrated in the size range 11-60μm) and regularly shaped polystyrene (PS) beads (15, 1500, 15,000 particles/individual/week, 40μm) over 42weeks. During this period, we monitored physiological traits such as clearance rate, byssus production, growth rate, superoxide dismutase (SOD) activity, malondialdehyde (MDA) concentrations, and the condition index (CI). Negative effects of the tested microplastics on mussel performance emerged late in the experiment and were rather weak. Interestingly, even after having received the lowest particle dose of PS, SOD activity in the gill was significantly lower in mussels exposed to microplastics compared to a group of conspecifics that were kept in clean water. However, growth and CI, which are both closely related to the fitness of the mussels, were not found to be impaired at the end of the exposure phase. This is the so far longest laboratory microplastic exposure study on mussels and we worked with particle doses that reflect todays pollution levels. The small effect sizes we observed for the response variables assessed suggest that these specific microplastics pose only a minor threat to blue mussel populations.

Effect of cloud seeding on aerosol properties and particulate matter variability in the United Arab Emirates

In this study, satellite data and those obtained from air quality monitoring stations were used to evaluate the effect of cloud seeding missions conducted from January 2017 to March 2017 in the United Arab Emirates (UAE). To determine PM variability during and after the cloud seeding missions, information on daily mean particulate matter (PM10 and PM2.5) concentrations obtained from 20 air quality ground-based stations was analyzed from January 2017 to April 2017. The stations were divided according to four distinct geographic zones, which include petrochemical and non-petrochemical industrial, residential, and low populated areas. Moreover, data from the MAIAC 1-km product (MCD19A2) obtained using the Moderate Resolution Imaging Spectroradiometer onboard the Terra satellite were used to identify the correlation between aerosol optical depth and ground PM concentrations. The results showed that among the areas, the petrochemical and non-petrochemical industrial areas had the highest PM2.5 levels. Urban areas located adjacent to deserts had significantly higher PM10 concentrations than other urban areas. The PM concentration was high during the period of cloud seeding missions. This finding indicated that silver iodine crystals fired during the missions might have increased the concentration of PM in the air. Moreover, cloud seeding missions might have a more significant effect in increasing PM10 concentrations compared with PM2.5 concentrations. Hence, local weather conditions might have affected the decay of silver iodine particles during the missions. Long-range air mass transport may have an influence on the natural and anthropogenic particle concentrations in land and water bodies surrounding the UAE.

Why it is important to analyze the chemical composition of microplastics in environmental samples

Research on microplastics is not straightforward, and, until recently, the visual methods used to identify microplastics might have overestimated their amounts, mainly when the target plastics were <500 μm. The analytical approach has moved on since then, and more sophisticated methods are now used to sample and extract microplastic particles from a very wide variety of environmental samples. Therefore, as spectroscopy is the most reliable way to identify microplastics with sufficient certainty, reviewers demand the assignment of polymer types to single microplastic particles in environmental and biological samples, as a condition of final manuscript acceptance. This is a legitimate requirement for three fundamental reasons. First, it is important to confirm the correct nomenclature—which is a scientific principle applicable beyond microplastics pollution research. Second, plastics research is important, primarily due to the intrinsic characteristics of plastic constituent polymers, such as persistence in the environment, which often does not apply to other anthropogenic particles. Third, current scientific discussion on microplastic contamination issues is centered on their relatively long persistence in the environment, and only if reliable methods are used to identify plastic particles will the microplastic research field improve its credibility, survive the test of time, and become a permanent research field.

Anthropogenic particles in sediment from an Arctic fjord

The research on plastic pollution is increasing worldwide but little is known about the contamination levels in the Arctic by microplastics and other anthropogenic particles (APs) such as dyed fibres. In this study, two different sampling designs were developed to collect 68 sediment subsamples in five locations in a remote Arctic fjord, Kongsfjorden, northwest of Svalbard. Those five stations composed a transect from a sewage outlet recently installed close to the northernmost settlement, Ny-Ålesund, to an offshore site. Plastics and other APs were extracted by density separation and analysed by both Raman and Fourier Transform Infrared spectroscopy. Among the 37 APs found, 19 were microplastics. The others were classified as APs due to the presence of a dye or another additive. On average, 0.33 AP 100 g−1 were found in the surface sediment and their sizes ranged between 0.10 and 6.31 mm. The site most polluted by APs was located at the mouth of the fjord while the less polluted ones were the offshore and the outlet sites. We believe that currents in the fjord have carried APs towards the mouth of the fjord where an eddy could retain APs which might sink the seafloor due to various reasons (ingestion & packaging, fouling-induced changes in buoyancy). In the cores, several different APs were found down to a depth of 12 cm. These APs may have been present in the sediments for decades or been transported deeper by biota. Here we provided data on plastic but also on other anthropogenic particles from a remote fjord in Svalbard.

Flow-Through Quantification of Microplastics Using Impedance Spectroscopy.

Understanding the sources, impacts, and fate of microplastics in the environment is critical for assessing the potential risks of these anthropogenic particles. However, our ability to quantify and identify microplastics in aquatic ecosystems is limited by the lack of rapid techniques that do not require visual sorting or preprocessing. Here, we demonstrate the use of impedance spectroscopy for high-throughput flow-through microplastic quantification, with the goal of rapid measurement of microplastic concentration and size. Impedance spectroscopy characterizes the electrical properties of individual particles directly in the flow of water, allowing for simultaneous sizing and material identification. To demonstrate the technique, spike and recovery experiments were conducted in tap water with 212-1000 μm polyethylene beads in six size ranges and a variety of similarly sized biological materials. Microplastics were reliably detected, sized, and differentiated from biological materials via their electrical properties at an average flow rate of 103 ± 8 mL/min. The recovery rate was ≥90% for microplastics in the 300-1000 μm size range, and the false positive rate for the misidentification of the biological material as plastic was 1%. Impedance spectroscopy allowed for the identification of microplastics directly in water without visual sorting or filtration, demonstrating its use for flow-through sensing.

Prevalence of microplastics and anthropogenic debris within a deep-sea food web

Microplastic particles (&lt;5 mm) are ubiquitous throughout global marine ecosystems, including the deep sea. Ingestion of microplastics and other anthropogenic microparticles is reported in diverse marine taxa across trophic levels. Trophic transfer, or the movement of microplastics across trophic levels, is reported in laboratory studies but not yet widely measured in marine food webs. The Monterey Bay submarine canyon ecosystem contains a well-studied, known deep-sea food web in which to examine the trophic fate of microplastics. We measured microplastic abundance across 17 genera spanning approximately 5 trophic levels and a diversity of feeding behaviors. Samples were collected using remotely operated vehicles and oblique midwater trawls, and gut contents of all individuals examined (n = 157) were analyzed for microplastic abundance and other anthropogenic particles greater than 100 µm using stereo microscopy. Microparticles were analyzed with Raman spectroscopy to confirm material type. Anthropogenic particles were found in all genera examined, across crustacean, fish, mollusk, and gelatinous organisms, in amounts ranging from 0 to 24 particles per individual. There was no significant relationship between microplastic amount and fish trophic level, suggesting that the trophic transfer of microparticles is not occurring. Body size was positively correlated with microplastic abundance across all taxa. The fish genus Scomber sp. drove this relationship, suggesting higher microparticle abundance in mobile individuals with broad horizontal distributions. Future work should examine physiological pathways for microplastic transport within organisms (e.g. excretion, accumulation on gills, internal translocation of particles) and between organisms within shared habitats to more fully understand the fate of microplastics within aquatic food webs.

PM &lt;sub&gt;2.5&lt;/sub&gt; Decadal Data in Cold vs. Mid-Climate Airports: COVID-19 Era and a Call for Sustainable Air Quality Policy

Airports are identified hotspots for air pollution, notably for fine particles (PM2.5) that are pivotal in aerosol-cloud interaction processes of climate change and human health. We herein studied the field observation and statistical analysis of 10 years data of PM2.5 and selected emitted co-pollutants (CO, NOx, and O3), in the vicinity of three major Canadian airports, with moderate to cold climates. The decadal data analysis indicated that in colder climate airports, pollutants like PM2.5 and CO accumulate disproportionally to their emissions, in fall and winter, in comparison to airports in milder climates. Decadal daily averages and standard errors of PM2.5 concentrations were Vancouver: 5.31 ± 0.017, Toronto: 6.71 ± 0.199, and Montreal: 7.52 ± 0.023 μg/m3. The smallest and the coldest airport with least flights/passengers had the highest PM2.5 concentration. QQQ-ICP-MS/MS and HR-S/TEM analysis of snow near Montreal airport indicated a wide range of emerging contaminants (Cd, Mo, Co, As, Ni, Cr, and Pb) ranging from 0.90 to 622 μg/L, which were also observed in the atmosphere, hinting air-snow interactions. The concentration of selected emerging contaminants in snow near the Montreal airport were at pare with highly polluted snow samples like Alberta’s oil sands regions. The mean freezing temperature of snow close to the airport was -6.19 ± 0.06 °C, statistically higher than in downtown Montreal (-13.35 ± 0.06 °C) hinting to the importance of anthropogenic particles on snow microphysics. During the lockdown a pronounced decrease in the concentrations of PM 2.5 in residential areas close to airports was observed, conforming with the recommended workplace health thresh-holds (~ 2 × 104 cm-3), while before the lockdown condensed nano-sized particles were above the health limit. Targeted reduction of PM2.5 emission is recommended for cold-climate regions.

Microplastics and other anthropogenic particles are prevalent in mussels from San Francisco Bay, and show no correlation with PAHs.

Microplastics are an emerging contaminant of high environmental concern due to their widespread distribution and availability to aquatic organisms. Filter-feeding organisms like bivalves have been identified as particularly susceptible to microplastics, and because of this, it has been suggested bivalves could be useful bioindicators of microplastic pollution in ecosystems. We sampled resident mussels and clams from five sites within San Francisco Bay for microplastics and other anthropogenic microparticles. Cages of depurated mussels (denoted transplants) were also deployed at four sites in the Bay for 90 days to investigate temporal uptake of microplastics and microparticles. Because microplastics can sorb PAHs, and thus may act as a source of these chemicals upon ingestion, transplant mussels and resident clams were also analyzed for PAHs. We found anthropogenic microparticles in all samples at all sites, some of which were identified as microplastics. There was no statistical difference between the mean number of microparticles found in resident and transplant species. There were significant site-specific differences among microparticle abundances in the Bay, with the highest abundances observed in the South Bay. No correlation was found between the number of microparticles and the sum concentrations of PAHs, priority PAHs, or any individual PAH, suggesting the chemical concentrations observed reflect broader chemical trends in the Bay rather than direct exposure through microplastic ingestion. The pattern of spatial distribution of microparticles in transplanted mussels matched that of sediment samples from the Bay, suggesting bivalves could be a useful bioindicator of microplastic abundances in sediment, but not surface water.