Charge Variant Analysis Research Articles

Development of the SupersonicIEF Method for High-Throughput Charge Variant Analysis.

The analysis of biopharmaceuticals for charge variants occurs from early-stage samples through formulation and process-development optimization. Higher throughput methods allow increased analysis of these samples to facilitate greater understanding of the samples and to better optimize their production and formulation. To enable higher throughput charge variant analysis, a new, rapid platform imaged capillary isoelectric focusing (icIEF) method was optimized to be two to three times faster than standard methods.

Characterization of Therapeutic Antibody Charge Heterogeneity Under Stress Conditions by Microfluidic Capillary Electrophoresis Coupled with Mass Spectrometry

Therapeutic antibodies are a major class of biopharmaceutics that are applied in disease treatment because of their many advantages, including high specificity and high affinity to molecular targets. Between their production and administration, therapeutic antibodies are exposed to multiple stress conditions. Forced degradation and stress stability studies are conducted to simulate the risk of degradation and the effects of these stresses, thereby enhancing understanding of the drug product to support strategies to mitigate the impact from stressed conditions. These types of studies are also routinely conducted to evaluate product comparability when major process changes are implemented during the production. Charge variant analysis helps understand the changes in the electrostatic environment of biotherapeutics and can uncover underlying molecular level alterations associated with charge variants. Herein, we used ZipChip native capillary electrophoresis-mass spectrometry (nCE-MS) to elucidate the changes in charge variant profiles at the molecular level. In two case studies under thermal stress conditions, we observed that charge variants arose from both post-translational modifications (including deamidation, oxidation, and pyroglutamate formation) and sequence truncations at the hinge regions. Under oxidative stress conditions, oxidation was found to be the major contributor to the changes in the charge variant profiles. Under pH stress conditions, the changes in the charge variant profile were due to increased levels of deamidation, oxidation, and pyroglutamate formation. ZipChip nCE-MS analysis enables identification of charge variant species under various stress conditions, thus supporting process and formulation development of biotherapeutics.

Titer and charge-based heterogeneity multiattribute monitoring of mAbs in cell culture harvest using 2D ProA CEX MS

Robust monitoring of heterogeneity in biopharmaceutical development is crucial for producing safe and efficacious biotherapeutic products. Multiattribute monitoring (MAM) has emerged as an efficient tool for monitoring of mAb heterogeneities like deamidation, sialylation, glycosylation, and oxidation. Conventional biopharma analysis during mAb development relies on use of one-dimensional methods for monitoring titer and charge-based heterogeneity using non-volatile solvents without direct coupling with mass spectrometry (MS). This approach requires analysis of mAb harvest by ProA for titer estimation followed by separate cation exchange chromatography (CEX) analysis of the purified sample for estimating charge-based heterogeneity. This can take up to 60–90 min due to the required fraction collection and buffer exchange steps. In this work, a native two-dimensional liquid chromatography (2DLC) mass spectrometry method has been developed with Protein A chromatography in the first dimension for titer estimation and cation exchange chromatography (CEX) in the second dimension for charge variant analysis. The method uses volatile salts for both dimensions and enables easy coupling to MS. The proposed 2DLC method exhibits a charge variant profile that is similar to that observed via the traditional methods and takes only 15 min for mass identification of each variant. A total of six charge variants were separated by the CEX analysis after titer estimation, including linearity assessment from 5 μg to 160 μg of injected mAb sample. The proposed method successfully estimated charge variants for the mAb innovator and 4 of its biosimilars, showcasing its applicability for biosimilarity exercises. Hence, the 2D ProA CEX MS method allows direct titer and charge variant estimation of mAbs in a single workflow.

Induction of heat shock protein expression in SP2/0 transgenic cells and its effect on the production of monoclonal antibodies.

The objective of the current investigation was to evaluate the induction of heat shock proteins (HSPs) in SP2/0 transgenic cells and the effect of these proteins on the production of monoclonal antibodies (mAbs). The SP2/0 cell line expressing the PSG-026 antibody, a biosimilar candidate of golimumab, the culture parameters, and the target protein expression were not justified for industrial production and were used for the experiments. Paracetamol and heat shock were used as chemical and physical inducers of HSPs, respectively. The results showed that paracetamol and heat shock increased the expression of HSP70 and HSP27 at the mRNA and protein levels. The expression of HSPs was greater in paracetamol-treated cells than in heat shock-treated cells. Paracetamol treatment at concentrations above 0.5 mM significantly reduced cell viability and mAb expression. However, treatment with 0.25 mM paracetamol results in delayed cell death and increased mAb production. Heat shock treatment at 45°C for 30 minutes after enhanced mAb expression was applied after pre-treatment with paracetamol. In bioreactor cultures, pretreatment of cells with paracetamol improved cell viability and shortened the lag phase, resulting in increased cell density. The production of mAbs in paracetamol-treated cultures was markedly greater than that in the control. Analysis of protein quality and charge variants revealed no significant differences between paracetamol-treated and control cultures, indicating that the induction of HSPs did not affect protein aggregation or charge variants. These findings suggest that inducing and manipulating HSP expression can be a valuable strategy for improving recombinant protein production in biopharmaceutical processes.

Multidimensional LC-MS with 1D multi-method option and parallel middle-up and bottom-up MS acquisition for in-depth characterization of antibodies

Monoclonal antibodies (mAbs) are large and highly heterogeneous species typically characterized using a plethora of analytical methodologies. There is a trend within the biopharmaceutical industry to combine several of these methods in one analytical platform to simultaneously assess multiple structural attributes. Here, a protein analyzer for the fully automated middle-up and bottom-up liquid chromatography-mass spectrometry (LC-MS) analysis of charge, size and hydrophobic variants is described. The multidimensional set-up combines a multi-method option in the first dimension (1D) (choice between size exclusion - SEC, cation exchange - CEX or hydrophobic interaction chromatography - HIC) with second dimension (2D) on-column reversed-phase (RPLC) based desalting, denaturation and reduction prior to middle-up LC-MS analysis of collected 1D peaks and parallel on-column trypsin digestion of denatured and reduced peaks in the third dimension (3D) followed by bottom-up LC-MS analysis in the fourth dimension (4D). The versatile and comprehensive workflow is applied to the characterization of charge, hydrophobic and size heterogeneities associated with an engineered Fc fragment and is complemented with hydrogen-deuterium exchange (HDX) MS and FcRn affinity chromatography – native MS to explain observations in a structural/functional context.

Development of a platform method for rapid detection and characterization of domain-specific post-translational modifications in bispecific antibodies

Charge heterogeneity is inherent to all therapeutic antibodies and arises from post-translational modifications (PTMs) and/or protein degradation events that may occur during manufacturing. Among therapeutic antibodies, the bispecific antibody (bsAb) containing two unique Fab arms directed against two different targets presents an additional layer of complexity to the charge profile. In the context of a bsAb, a single domain-specific PTM within one of the Fab domains may be sufficient to compromise target binding and could potentially impact the stability, safety, potency, and efficacy of the drug product. Therefore, characterization and routine monitoring of domain-specific modifications is critical to ensure the quality of therapeutic bispecific antibody products. We developed a Digestion-assisted imaged Capillary isoElectric focusing (DiCE) method to detect and quantitate domain-specific charge variants of therapeutic bispecific antibodies (bsAbs). The method involves enzymatic digestion using immunoglobulin G (IgG)-degrading enzyme of S. pyogenes (IdeS) to generate F(ab)2 and Fc fragments, followed by imaged capillary isoelectric focusing (icIEF) under reduced, denaturing conditions to separate the light chains (LCs) from the Fd domains. Our results suggest that DiCE is a highly sensitive method that is capable of quantitating domain-specific PTMs of a bsAb. In one case study, DiCE was used to quantitate unprocessed C-terminal lysine and site-specific glycation of Lys98 in the complementarity-determining region (CDR) of a bsAb that could not be accurately quantitated using conventional, platform-based charge variant analysis, such as intact icIEF. Quantitation of these PTMs by DiCE was comparable to results from peptide mapping, demonstrating that DiCE is a valuable orthogonal method for ensuring product quality. This method may also have potential applications for characterizing fusion proteins, antibody-drug conjugates, and co-formulated antibody cocktails.

CE methods for charge variant analysis of mAbs and complex format biotherapeutics.

Charge heterogeneity analysis of monoclonal antibodies (mAbs) and complex formats, such as bispecifics, is crucial for therapeutic applications. In this study, we developed two capillary electrophoresis (CE)-based methods, capillary zone electrophoresis (CZE) and imaged capillary isoelectric focusing (iCIEF), for analyzing a broad spectrum of mAbs and complex mAb formats. For CZE, we introduced a new buffer system and optimized the background electrolyte (BGE) with an alternative dynamic coating agent and a superior polymeric additive. The pH of the BGE was increased, leading to enhanced resolution of high pI and complex format mAbs. In iCIEF, we identified an ampholyte combination offering a highly linear pH gradient and covering a suitable pH range. We also investigated alternatives to denaturing stabilizers and found that non-detergent sulfobetaine 195 exhibited excellent properties for iCIEF applications. These optimized methods provide a framework for the charge heterogeneity analysis of therapeutic mAbs and complex formats.

Multiattribute Monitoring of Aggregates and Charge Variants of Monoclonal Antibody through Native 2D-SEC-MS-WCX-MS.

Monitoring of critical quality attributes such as size and charge-related heterogeneities is essential for biopharmaceutical manufacturers. Size-exclusion chromatography (SEC) is the preferred analytical technique for the quantification of aggregates and fragments in the product, whereas weak-cation exchange chromatography (WCX) is widely used for the characterization of charge variants of biotherapeutic products, in particular monoclonal antibodies (mAbs). Multiattribute monitoring offers the ability to monitor these attributes in a single run flow using two-dimensional liquid chromatography (2D-LC). Typically, in this approach, only the second-dimension samples are directly analyzed through mass spectrometry, as the first dimension has limitations concerning direct coupling with mass spectrometry. In the present study, a novel 2D-SEC-MS/WCX-MS workflow has been proposed, in which chromatography of both dimensions (D1 and D2) was directly coupled with mass spectrometry, through which size-related and charge-related variants of monoclonal antibody mAb A were analyzed simultaneously in their native form. In comparison to stand-alone SEC and WCX methods, this method enables simultaneous analysis of size and charge variants in a single workflow without manual intervention, allowing analysis of low abundant variants. Further, this method has 75% less sample requirement and a shorter analysis time (25 min vs 90 min) when size and charge variants were analyzed individually. The proposed native 2D-LC-MS workflow was used to analyze a stressed sample of mAb A, in which D1 analysis revealed the presence of aggregates (8-20%), which were primarily dimers, whereas D2 analysis showed an increment in acidic variants (9-21%).

Pertuzumab Charge Variant Analysis and Complementarity-Determining Region Stability Assessment to Deamidation.

Pertuzumab is a monoclonal antibody used for the treatment of HER2-positive breast cancer in combination with trastuzumab. Charge variants of trastuzumab have been extensively described in the literature; however, little is known about the charge heterogeneity of pertuzumab. Here, changes in the ion-exchange profile of pertuzumab were evaluated by pH gradient cation-exchange chromatography after stressing it for up to 3 weeks at physiological and elevated pH and 37 °C. Isolated charge variants arising under stress conditions were characterized by peptide mapping. The results of peptide mapping showed that deamidation in the Fc domain and N-terminal pyroglutamate formation in the heavy chain are the main contributors to charge heterogeneity. The heavy chain CDR2, which is the only CDR containing asparagine residues, was quite resistant to deamidation under stress conditions according to peptide mapping results. Using surface plasmon resonance, it was shown that the affinity of pertuzumab for the HER2 target receptor does not change under stress conditions. Peptide mapping analysis of clinical samples showed an average of 2-3% deamidation in the heavy chain CDR2, 20-25% deamidation in the Fc domain, and 10-15% N-terminal pyroglutamate formation in the heavy chain. These findings suggest that in vitro stress studies are able to predict in vivo modifications.

Revealing charge heterogeneity of stressed trastuzumab at the subunit level

Trastuzumab is known to be heterogeneous in terms of charge. Stressing trastuzumab under physiological conditions (pH 7.4 and 37 °C) increases charge heterogeneity further. Separation of charge variants of stressed trastuzumab at the intact protein level is challenging due to increasing complexity making it difficult to obtain pure charge variants for further characterization. Here we report an approach for revealing charge heterogeneity of stressed trastuzumab at the subunit level by pH gradient cation-exchange chromatography. Trastuzumab subunits were generated after limited proteolytic cleavage with papain, IdeS, and GingisKHAN®. The basic pI of Fab and F(ab)2 fragments allowed to use the same pH gradient for intact protein and subunit level analysis. Baseline separation of Fab subunits was obtained after GingisKHAN® and papain digestion and the corresponding modifications were determined by LC–MS/MS peptide mapping and middle-down MALDI-ISD FT-ICR MS. The described approach allows a comprehensive charge variant analysis of therapeutic antibodies that have two or more modification sites in the Fab region.

Mass Spectrometry-Based Charge Heterogeneity Characterization of Therapeutic mAbs with Imaged Capillary Isoelectric Focusing and Ion-Exchange Chromatography as Separation Techniques.

Imaged capillary isoelectric focusing (icIEF) and ion-exchange chromatography (IEX) are two essential techniques that are routinely used for charge variant analysis of therapeutic monoclonal antibodies (mAbs) during their development and in quality control. These two techniques that separate mAb charge variants based on different mechanisms and IEX have been developed as front-end separation techniques for online mass spectrometry (MS) detection, which is robust for intact protein identification. Recently, an innovative, coupled icIEF-MS technology has been constructed for protein charge variant analysis in our laboratory. In this study, icIEF-MS developed and strong cation exchange (SCX)-MS were optimized for charge heterogeneity characterization of a diverse of mAbs and their results were compared based on methodological validation. It was found that icIEF-MS outperformed SCX-MS in this study by demonstrating outstanding sensitivity, low carryover effect, accurate protein identification, and higher separation resolution although SCX-MS contributed to higher analysis throughput. Ultimately, integrating our novel icIEF-HRMS analysis with the more common SCX-MS can provide a promising and comprehensive strategy for accelerating the development of complex protein therapeutics.

High-sensitivity and high-resolution therapeutic antibody charge variant and impurity characterization by microfluidic native capillary electrophoresis-mass spectrometry

Therapeutic antibodies are a major class of pharmaceutical drugs used to treat a wide variety of diseases. They have several advantages including the high specificity and binding affinity to their molecular targets, and generally low immunotoxicity and mild adverse effects. The characterization of therapeutic antibodies is crucial to ensure drug efficacy and safety. Charge variant analysis can be used to examine the charge variant forms of therapeutic antibodies, which may reflect modifications that impact the drug quality. Native capillary electrophoresis-mass spectrometry (nCE-MS) analysis by an integrated ZipChip CE-MS system is an alternative and complementary method to cation-exchange chromatography and imaged capillary isoelectric focusing to support the characterization of charge variants. In this study, we performed nCE-MS analysis to evaluate the charge variants and impurities in therapeutic antibodies including immunoglobin G (IgG) monoclonal antibodies (mAbs), bispecific antibodies (bsAbs), and alternative formats such as therapeutic antibodies with addition or removal of antigen-binding domain. With the ZipChip CE-MS system, high-resolution charge variant separation was achieved for different types of therapeutic antibodies. Moreover, ZipChip nCE-MS analysis enabled high-sensitivity detection and identification of species with low abundance, including proteolytic cleavage and fragmentation in mAb, monospecific mAb impurities in bsAb, and O-glycosylation in alternative formats to support biopharmaceutical development and investigations.

Charge Variants Analysis of a Bispecific Antibody Using a Fully Automated One-step Capillary Isoelectric Focusing - Mass Spectrometry Method

Background: Bispecific antibody (BsAb) therapeutics have emerged as the next-generation immuno oncology therapy. The architecture of bsabs is inherently more complex than that of mAb therapeutics. As a result, prior knowledge of critical quality attributes (CQAs) assessment of mAbs is no longer inclusive for bsabs. Objective: The main objective of this work is to develop a fully automated one-step capillary isoelectric focusing – mass spectrometry (cIEF-MS) workflow for the charge variant analysis of a bispecific antibody molecule. Method: A number of critical factors for the method development are investigated: the performance of two commonly used ampholytes are compared; the impact of protein concentration for the cIEF-MS assay is examined; as for sample preparation, off-line and on-line desalting are compared; various combinations of Pharmalyte® 3-10 and 8-10.5 are considered. Results: In this fully automated workflow, the charge variants of this BsAb molecule are clearly separated and accurately identified. Based on six repeat injections, RSDs of the migration time of the identified charge variants are between 3 and 6%. The identified masses of each charge variant show a variation between 0.48 and 1.40 Da. The delta masses of the basic and acidic variants are from the most basic to the most acidic, -58.59, 162.26, 453.44, -907.47, 1,563.60, and 1,566.98 Da, respectively. Conclusion: Overall, the separation resolution, system sensitivity, robustness, and reproducibility of this fully automated cIEF-MS workflow, as demonstrated using this BsAb example, proves it a powerful assay for the quality assessment of recombinant protein therapeutics.

Ion exchange chromatography hyphenated with fluorescence detector as a sensitive alternative to UV detector: Applications in biopharmaceutical analysis

Cation-exchange chromatography (CEX) is widely used for analysis of charge heterogeneity in monoclonal antibodies (mAbs) in the biopharmaceutical industry. Charge variant separation is typically achieved by either alteration of ionic strength or pH, and detection of the various species is performed using diode array detectors (DAD) at 280 nm. In this study, we investigate the suitability of fluorescence detector (FLD) as a sensitive alternative to traditional UV280 detection-based charge variant analysis. The objective of this work is to compare the performance of charge variants detection through cation exchange chromatography between FLD and DAD detectors. This was demonstrated for a mass spectroscopy compatible, pH based CEX method utilizing volatile ammonium acetate salt. The stability of FLD detection was tested as per method validation criteria set in the ICH Q2-(R1). LODFLD and LOQFLD were 59.07 and 59.64 times lower in comparison to LODUV and LOQUV, respectively (LODFLD: 0.13 µg, LOQFLD: 0.39 µg). The LinearityFLD was obtained in the range of 1–200 µg. Accuracy calculated as recovery value was between 93.38% and 103.35% and highest RSD value obtained for robustness was 2.54% (area under the curve). The application of FLD detection based CEX as a Process Analytical Technology (PAT) enabler in mAb biopharmaceutical analysis was demonstrated through direct charge variant profiling of CHO cell harvest supernatant (without pre purification through Pro-A). The method was also applied to and found suitable for biosimilarity assessment of drug products. While the present study is focused on analysis of trastuzumab biosimilars, the proposed method is expected to be applicable to any mAb product after suitable gradient modification.

National Control Laboratory Assessment of Quality of Rituximab Biosimilars in India.

In past few years many rituximab (RTX) biosimilars have been launched in India. Biosimilars are products that are similar in terms of quality, safety, and efficacy to its innovator product and are expected to offer improved affordability. The less clinical examination is a significant source of reduction in the cost of development of a biosimilar. However, this clinical relief is predicated on the assumption that there is analytical similarity between the biosimilar and the innovator product. Therefore, the role of National Control Laboratory become very important to ensure the quality of these drugs by carrying out analytical characterization at the point of drug product release level as when referred by National Regulatory Authority for quality evaluation. To assess the similarity between innovator and biosimilars, different physicochemical and biological quality attributes were assessed. A multitude of state-of-the-art analysis of N = 3 RTX biosimilars marketed in India revealed that the impurity profiles of these biosimilars measured by charge variant analysis (cation exchange chromatography-high performance liquid chromatography [HPLC], capillary zone electrophoresis, and capillary isoelectric focusing), aggregates profiling (size exclusion chromatography-HPLC), fragments analysis (capillary electrophoresis-sodium dodecyl sulfate) were found to be significantly varying as compared with the innovator product. There were significant variations in acidic variants (p = 0.023) and basic variants (p = 0.0005), isoelectric point value (p < 0.0001), aggregates (p = 0.0231), and fragments (p < 0.0001) of biosimilars were found as that of innovator product. However, these differences were not affecting the biological activity in the cell-based potency analysis by complement-dependent cytotoxicity (CDC) assay (p = 0.1026), antibody-dependent cell-mediated cytotoxicity (ADCC) (p = 0.3736), and binding assay by flow cytometer fluorescence-activated cell sorting (p = 0.4005) of these biosimilars as compared with the innovator product.

Dual-detection approach for a charge variant analysis of monoclonal antibody combination products using imaged capillary isoelectric focusing.

The clinical benefits of treatments with a combination of two or more therapeutic monoclonal antibodies (mAbs) have emerged in recent years. Imaged capillary isoelectric focusing is a frequently used technology in the biopharmaceutical industry for charge variant analysis of protein therapeutics. However, with the wide concentration ranges of combination products, one component may fall within the linear detection range, whereas the other does not. Here, we report a novel methodology to explore charge variants of mAb mixtures using multiple detection techniques simultaneously. We use ultraviolet absorbance to monitor the charge variants of the high-concentration component and native fluorescence (FL) to monitor the variants of the low-concentration one. Charge variants of mixtures that span 40-fold in ratio differences can be accurately quantified with this approach. In contrast to the conventional methods, it is not necessary to prepare and analyze two samples at different concentrations and combine the results for combination product testing. Additionally, the use of FL detection enables the charge variant analysis of highly potent/low abundant mAbs in a mixture. This methodology is more quality-control friendly and efficient for the charge variant analysis of combination products with wide ratios.

Method Development and Qualification of pH-Based CEX UPLC Method for Monoclonal Antibodies

Post-translational modifications (“PTMs”) in monoclonal antibodies (mAbs) contribute to charge variant distribution, which will affect biological efficacy and safety. For the characterization of mAbs, charge variants are used as a critical quality attributes for product quality, stability consistency and effectiveness. Charge variants in mAbs are characterized by a time-consuming and a multistep process starting from cation/anion exchange chromatography, acidic/basic fractions collection and subsequent reverse phase (RP) liquid chromatography, coupled with mass spectrometry (MS) analysis. Hence, an alternative characterization approach that would be highly selective for ion exchange chromatography-based charge variant analysis, which is compatible with on-line MS detection, is needed in the biopharma industry. Against this backdrop, multiple studies are being conducted to develop a simple straight on-line charge variant analysis method. In this regard, we apply the current study, which aims to develop a charge variant analytical method, based on volatile buffers with low ionic strength that can be used for on-line MS detection of charge variants of mAbs. This would enable the detection on “PTMs” using low ionic strength mobile phase compatible with MS. Hence, fruitful data can be obtained with a single chromatography run without any test sample preparation, eliminating the need for multiple steps of analysis, time-consuming process and multiple sample preparation steps. Thus, Charge Variant Analysis-MS technique will allow the characterization of charge-related PTMs on the intact protein stage. In this regard, this study is about development of a method having combination of chromatography and volatile mobile phase for mass spectrometry detection of mAbs being analyzed in native form. The method is qualified considering pharmacopeia guidelines because the ultimate aim is to transfer this method for Quality Control (QC) release testing of a monoclonal antibody, which is critical for batch release and the regulatory point of view. Acidic and basic variants have been separated with high resolution peak profile. Furthermore, there was no matrix interference and good separation selectivity in terms of specificity was obtained using this method. The experimental data suggested for the linearity of the method are 2.4 mg/mL to 3.6 mg/mL with % RSD below 2.0%. Additionally, Limit of Quantitation is found to be 0.15 mg/mL, which is 5% of loading amount. Consistently, the data show that the method is precise under the same operating conditions with a short time interval. Overall a simple, accurate, robust and precise pH gradient cation exchange chromatography method was developed and qualified for the characterization of a therapeutic native mAb. Additionally, this method can be used to claim a biosimilar product profile of an in-house product compare to an innovator.

Front Cover: Evaluation of an icIEF‐MS system for comparable charge variant analysis of biotherapeutics with rapid peak identification by mass spectrometry

DOI: 10.1002/elps.202100295 The cover picture shows a microfluidic chip-based integrated icIEF-MS technology for characterizing monoclonal antibodies. Antibody charge variants are color-coded and correspond to acidic and basic modifications. Charge variants are separated by pI, mobilized toward the on-chip electrospray tip, ionized, and detected using mass spectrometry. Identification of antibody modifications is achieved using accurate mass and abundance patterns observed in proteoform distributions.

Evaluation of an icIEF-MS system for comparable charge variant analysis of biotherapeutics with rapid peak identification by mass spectrometry.

Protein therapeutics are usually produced in heterogeneous forms during bioproduction and bioprocessing. Heterogeneity results from post‐translational modifications that can yield charge variants and require characterization throughout product development and manufacturing. Isoelectric focusing (IEF) with UV detection is one of the most common methods to evaluate protein charge heterogeneity in the biopharmaceutical industry. To identify charge variant peaks, a new imaged microfluidic chip‐based isoelectric focusing (icIEF) system coupled directly to mass spectrometry was recently reported. Bridging is required to demonstrate comparability between existing and new technology. As such, here we demonstrate the comparability of the pI value measurement and relative charge species distributions between the icIEF‐MS system and the control data from a frequently utilized methodology in the biopharmaceutical industry for several blinded development‐phase biopharmaceutical monoclonal antibodies across a wide pI range of 7.3–9.0. Hyphenation of the icIEF system with mass spectrometry enabled direct and detailed structural determination of a test molecule, with masses suggesting acidic and basic shifts are caused by sialic acid additions and the presence of unprocessed lysine residues. In addition, MS analysis further identified several low‐abundance glycoforms. The icIEF‐MS system provides sample quantification, characterization, and identification of mAb proteoforms without sacrificing icIEF quantification comparability or speed.

Coupling Anion Exchange Chromatography with Native Mass Spectrometry for Charge Heterogeneity Characterization of Monoclonal Antibodies.

Despite the recent success of coupling anion exchange chromatography with native mass spectrometry (AEX-MS) to study anionic proteins, the utility of AEX-MS methods in therapeutic monoclonal antibody (mAb) characterization has been limited. In this work, we developed and optimized a salt gradient-based AEX-MS method and explored its utility in charge variant analysis of therapeutic mAbs. We demonstrated that, although the developed AEX-MS method is less useful for IgG1 molecules that have higher isoelectric points (pIs), it is an attractive alternative for charge variant analysis of IgG4 molecules. By elevating the column temperature and lowering the mAb pI through PNGase F-mediated deglycosylation, the chromatographical resolution from AEX separation can be significantly improved. We also demonstrated that, after PNGase F and IdeS digestion, the AEX-MS method exhibited excellent resolving power for multiple attributes in the IgG4 Fc region, including unprocessed C-terminal Lys, N-glycosylation occupancy, and several conserved Fc deamidations, making it ideally suited for multiple attribute monitoring (MAM). Through fractionation and peptide mapping analysis, we also demonstrated that the developed AEX-MS method can provide site-specific and isoform-resolved separation of Fc deamidation products, allowing rapid and artifact-free quantitation of these modifications without performing bottom-up analysis.