Amido Linkage Research Articles

Maduraflavacins A-E, Unusual Phenyl Polyene Metabolites Produced by a Rare Marine-Derived Actinomadura sp.

Phenyl polyenes comprise a small family of bacterial natural products with broad and potent bioactivities, primarily found in actinobacteria. Here we report the discovery of five new phenyl polyene metabolites, maduraflavacins A-E (1-5), from a rare, marine-derived actinobacteria strain Actinomadura glauciflava NA03286. The structures of these natural products were determined by NMR spectroscopy, HRESIMS, LC-MS/MS, and chemical derivatization. All of these new maduraflavacins feature methyl substitutions at the polyene side chain, and maduraflavacins A-C (1-3) possessed a 1-N-β-d-glucosamine-(3 → 1)-O-β-d-glucopyranosyl-(3 → 1)-O-β-d-glucopyranosyl-(6 → 1)-O-β-d-glucopyranoside tetrasaccharide moiety via an amido linkage with a phenyl polyene skeleton. Compounds 1 and 2 showed weak antibacterial activities against the Gram-positive bacteria Staphylococcus aureus Sau 16339 and Micrococcus luteus, respectively.

Nickel (II) imidazol-2-ylidine Complexes Supported Through Internally Functionalized Amido Linkage Synthesis and Catalytic Studies for Suzuki Miyaura Cross Coupling

Nickel (II) imidazol-2-ylidine Complexes Supported Through Internally Functionalized Amido Linkage Synthesis and Catalytic Studies for Suzuki Miyaura Cross Coupling

Novel structure and excellent nonlinear optical performance nanocomposite derived from flower-like MOF grown on MoS2

Molybdenum disulfide (MoS2) is a nonlinear optical material with graphene-like structure. In order to further improve the nonlinear optical performance of MoS2 and expand the application fields of MoS2, we report a simple in-situ self-growth method to functionalize MoS2 nanosheets with metal-organic framework (MOF) for the first time to pursuit excellent reverse saturable absorption performance and optical limiting performance. Firstly, defective MoS2 nanosheets was obtained by chemical etching with H2O2 and cysteamine was inserted into the sulfur vacancies under ultrasound to obtain MoS2–NH2. Then 5,10,15,20-Tetra (4-carbomethoxyphenyl) porphyrin (TCPP) as MOF active growth sites were grafted on MoS2–NH2 by amido linkage to obtain MoS2-TCPP in mild conditions. Finally, flower-like porphyrin-based CuMOF was grown on MoS2-TCPP by solvothermal method to obtain MoS2-CuMOF with stable structure. The third order nonlinear optical performance of MoS2-CuMOF were studied by Z-scan technique. It was found that the third order nonlinear absorption coefficient of MoS2-CuMOF was significantly improved compared with MoS2. Under the same energy of laser irradiation, the third order nonlinear absorption coefficient of MoS2-CuMOF nanocomposite in solution was 6 × 10−10 m/W about 2.3 times of the pristine MoS2 (2.6 × 10−10 m/W). After blending the above materials with polymethyl methacrylate (PMMA) to prepare a solid device, the third order nonlinear absorption coefficient of MoS2-CuMOF/PMMA was 18 × 10−10 m/W about 3.6 times of the MoS2/PMMA (5 × 10−10 m/W). And MoS2-CuMOF/PMMA had better optical limiting ability than MoS2/PMMA. The significant improvement in the performance of the composites can be attributed to the energy transfer between MoS2 and CuMOF, and porphyrin aggregation was inhibited by PMMA after the preparation of devices. Energy transfer can be proved by fluorescence spectroscopy. This work not only provided an example for the covalent functionalization of MoS2, but also offered a new method for designing materials with excellent nonlinear optical performance.

Targeted paclitaxel prodrug nanoassemblies to improve therapeutic effects for liver cancer

Prodrug nanoassemblies fabricated by anticancer drug conjugates exhibited more advantages in controlled drug release and bioavailability and favorable antitumor efficacy. In this paper, lactobionic acid (LA) was connected with polyethylene glycol through amido linkages, and paclitaxel was joined with polyethylene glycol by means of ester bonds to form the prodrug copolymer LA-PEG-PTX. Then, LA-PEG-PTX was automatically assembled into LA-PEG-PTX nanoparticles (LPP NPs) by dialysis. The LPP NPs had a relatively uniform size of approximately 200 nm, a negative potential (−13.68 mV), and a spherical shape under TEM. The drug loading of LPP NPs was 3.91%, which was measured by HPLC. The in vitro release profile of LPP NPs exhibited a sustained release feature. The results of the pharmacokinetic test in rats showed that LPP NPs had higher T1/2 and AUC values than the control group (free PTX) and a prolonged in vivo circulation time, thus increasing the bioavailability of PTX. Remarkably, the LPP NPs were absorbed into HepG2 cells after galactose-directed internalization and enhanced cytotoxicity. Consequently, LPP NPs displayed notable antitumor activity in Kunming mice with H22 hepatocellular carcinoma. Collectively, these findings suggested that paclitaxel prodrug-based self-assembled nanoparticles were a promising alternative for improving the bioavailability and antitumor effect of PTX.

Chemical bonding of Epigallocatechin-3-gallate to the surface of nano-hydroxyapatite to enhance its biological activity for anti-osteosarcoma

Post-surgical defect repair combined with the elimination of residual cancer cells remains a major clinical challenge for the therapy of malignant bone tumors. As a natural product extracted from green tea, epigallocatechin-3-gallate (EGCG) has a wide range of biological activities. In this study, we investigated the anti-osteosarcoma and osteogenic potential of the natural compound EGCG in combination with hydroxyapatite (HA) for the post-operative treatment of osteosarcoma. We have synthesized well-dispersed surface amino-functionalized hydroxyapatite nanoparticles by the template method combined with surface modification techniques. Then, we conjugated EGCG with HA nanoparticles via amido linkage to prevent burst release of the biomolecules and improve their stability. The results showed that the as-prepared HA-EGCG nanoparticles had the same antioxidant activity as pure EGCG. The HA-EGCG nanoparticles demonstrated efficient EGCG release upon enzyme interactions in an acidic tumor environment, facilitating the accumulation of EGCG in tumor tissues and improving its bioavailability. Compared with pure EGCG and HA, HA-EGCG exhibited enhanced anticancer activity in vitro and in vivo. Furthermore, HA-EGCG could effectively promote osteogenic differentiation. This covalent strategy provides a simple method to fabricate a pH and enzyme-mediated delivery platform to refine the stability and bioavailability of EGCG. This research provides a strategy into designing biomaterials combined with EGCG for the potential application in bone diseases.

Fabrication of Chitosan-Based Network Polysaccharide Nanogels

In this study, we developed a method to fabricate chitosan-based network polysaccharides via the condensation between amino groups in water-soluble chitosan (WSCS) and a carboxylate-terminated maltooligosaccharide crosslinker. We previously reported on the fabrication of network-polysaccharide-based macroscopic hydrogels via the chemical crosslinking of water-soluble chitin (WSCh) with the crosslinker. Because the molecular weight of the WSCS was much smaller than that of the WSCh, in the present investigation, the chemical crosslinking of the WSCS with the crosslinker was observed at the nanoscale upon the condensation between amino and carboxylate groups in the presence of a condensing agent, 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide hydrochloride, and N-hydroxysuccinimide, affording nano-sized chitosan-based network polysaccharides. The occurrence of the crosslinking via the formation of amido linkages was supported by the IR analysis and 1H NMR measurements after the dissolution via acid hydrolysis in DCl/D2O. The products formed nanogels, whose sizes depended on the amino/carboxylate feed ratio. The nanoscale morphology and size of the products were evaluated via scanning electron microscopy, dynamic light scattering analyses, and transition electron microscopy. In the present study, we successfully developed the method to fabricate nanogel materials based on network polysaccharide structures, which can practically be applied as new polysaccharide-based 3D bionanomaterials.

Antibacterial efficacy of Satureja montana L. essential oil encapsulated in methyl-β-cyclodextrin/soy soluble polysaccharide hydrogel and its assessment as meat preservative

As an emerging packaging material, hydrogels have been attracting attention to inhibit foodborne pathogens by encapsulating antimicrobial substances. Herein, an antibacterial packaging material was prepared via incorporation of methyl-β-cyclodextrin/Satureja montana L. essential oil inclusion complexes (MCD/SEO-ICs) into soy soluble polysaccharide (MCD/SEO-SSPS) hydrogel. During, the addition of 1-(3-dimethylaminopropyl)-3-ethylcarbodiimide hydrochloride (EDC) and N-hydroxysuccinimide (NHS) facilitated the formation of amido linkage between -NH2 and –COOH. Compared with SSPS hydrogel, the MCD/SEO-SSPS hydrogel exhibited a more compact structure. What's more, physical characterization indicated that combining MCD/SEO-ICs with SSPS could improve the hardness, adhesiveness and springiness of hydrogel. More importantly, a good antibacterial activity of SPSS hydrogel was obtained with the addition of MCD/SEO-ICs. On this basis, the application test demonstrated that the prepared MCD/SEO-SSPS hydrogel could reduce the visible count of Staphylococcus aureus (S. aureus) in meat samples by 3.5 Log CFU/g during 7-days storage, which retained the freshness of chilled pork and extended the shelf life. The above results indicated that MCD/SEO-SSPS hydrogel can be used as a safe and effective active packaging material for chilled meat preservation.

Installation of an aryl boronic acid function into the external section of N-aryl-oxazolidinones: Synthesis and antimicrobial evaluation.

N-aryl-oxazolidinones is a prominent family of antimicrobials used for treating infections caused by clinically prevalent Gram-positive bacteria. Recently, boron-containing compounds have displayed intriguing potential in the antibiotic discovery setting. Herein, we report the unprecedented introduction of a boron-containing moiety such as an aryl boronic acid in the external region of the oxazolidinone structure via a chemoselective acyl coupling reaction. As a result, we accessed a series of analogues with a distal aryl boronic pharmacophore on the oxazolidinone scaffold. We identified that a peripheric linear conformation coupled with freedom of rotation and no further substitution on the external aryl boronic ring, an amido linkage with hydrogen bonding character, in addition to a para-relative disposition between boronic group and linker, are the optimal combination of structural features in this series for antimicrobial activity. In comparison to linezolid, the analogue comprising all those features, compound 20b, displayed levels of antimicrobial activity augmented by an eight-fold to a thirty-two-fold against a panel of Gram-positive strains, and a near one hundred-fold against Escherichia coli JW5503, a Gram-negative mutant strain with a defective efflux capability.

PH-sensitive drug delivery based on chitosan wrapped graphene quantum dots with enhanced fluorescent stability.

Graphene quantum dots (GQDs) were prepared by the pyrolysis of citric acid (CA), which were used for the loading of hydrophilic cytarabine (Cyt), an anti-cancer drug, and then wrapped with chitosan (CS) gels for the encapsulation of the loaded Cyt. The fluorescent stability of GQDs was significantly enhanced in the presence of CS, which might be attributed to the inhibited agglomeration of GQDs by the CS gels. In addition, the burst release of Cyt from the developed carrier was also effectively relieved by the CS coating. Since the incorporation of Cyt into GQDs was achieved by amidation reaction, the delivery of Cyt from the carrier was pH-sensitive due to the hydrolysis of the amido linkage between GQDs and Cyt in acidic medium.

Highly sensitive electrochemiluminescence biosensor for VEGF165 detection based on a g-C3N4/PDDA/CdSe nanocomposite.

In this work, an electrochemiluminescence (ECL) biosensor was fabricated for the selective detection of vascular endothelial growth factor (VEGF165). g-C3N4/PDDA/CdSe nanocomposites were used as the ECL substrate. Then, DNA labeled at the 5' end with amino groups (DNA1) was immobilized on the surface of g-C3N4/PDDA/CdSe nanocomposite-modified glassy carbon electrode (GCE) by amido linkage. AuNP-labeled target DNA (Au-DNA2) could hybridize with DNA1 to form a double strand. The ECL of the g-C3N4/PDDA/CdSe nanocomposite was efficiently quenched due to the resonance energy transfer between CdSe QDs and Au NPs. After VEGF165 was recognized and bound by Au-DNA2, the double helix was disrupted, and the energy transfer was broken. In this case, Au-DNA2 was released from the electrode surface, and the ECL intensity recovered to a higher level. Under optimal conditions, this ECL biosensor possesses excellent selectivity, accuracy, and stability for VEGF165 detection in a linear range of 2pgmL-1 to 2ngmL-1 with a detection limit of 0.68pgmL-1. In addition, this assay has been successfully applied to the determination of VEGF165 in serum samples. Graphical abstract Schematic representation of the electrochemiluminescence sensor based on a g-C3N4/PDDA/CdSe nanocomposite, which can be determined in the concentration of vascular endothelial growth factor in serum.

Preparation of a Cross-Linked Sulfonated Poly(arylene ether ketone) Proton Exchange Membrane with Enhanced Proton Conductivity and Methanol Resistance by Introducing an Ionic Liquid-Impregnated Metal Organic Framework.

A novel ionic liquid-impregnated metal-organic-framework (IL@NH2-MIL-101) was prepared and introduced into sulfonated poly(arylene ether ketone) with pendent carboxyl groups (SPAEK) as the nanofiller for achieving hybrid proton exchange membranes. The nanofiller was anchored in the polymeric matrix by the formation of amido linkage between the pendent carboxyl group attached to the molecule chain of SPAEK and amino group belonging to the inorganic framework, thus leading to the enhancement in mechanical properties and dimensional stability. Besides, the hybrid membrane (IL@MOF-1) exhibits an enhanced proton conductivity up to 0.184 S·cm-1 because of the incorporation of ionic liquid in the nanocages of NH2-MIL-101. Moreover, the special structure of NH2-MIL-101 contributes to a low leakage of ionic liquid so as to retain the stable proton conductivity of hybrid membranes under fully hydrated conditions. Furthermore, as a result of a cross-linked structure formed by inorganic nanofiller, the IL@MOF-1 hybrid membrane shows a lower methanol permeability (7.53 × 10-7 cm2 s-1) and superior selectivity (2.44 × 105 S s cm-3) than the pristine SPAEK membrane. Especially, IL@MOF-1 performs high single-cell efficiency with a peak power density of 37.5 mW cm-2, almost 2.3-fold to SPAEK. Electrochemical impedance spectroscopy and scanning electron microscopy indicated that the nanofiller not only contributed to faster proton transfer but also resulted in a tighter bond between the membrane and catalyst. Therefore, the incorporation of IL@NH2-MIL-101 to prepare the hybrid membrane is proven to be suitable for application in direct methanol fuel cells.

Heterogeneous Prolinamide-Catalyzed Atom-Economical Synthesis of β-Thioketones from Bio-Based Enones.

Sulfur-containing compounds are a class of important motifs extensively applied in pharmaceutical and pesticidal industries as well as in electrochemistry, toxicant separation, and organic syntheses. Herein, we describe a novel and efficient metal-free catalytic strategy for the rapid synthesis of β-thioketones from sustainable enone derivatives and thiols via thia-Michael addition enabled by heterogeneous prolinamide. At room temperature, up to 98% yield of β-thioketones could be obtained over the solid UiO-66-NH-proline catalyst facilely prepared by the covalent immobilization of proline onto UiO-66-NH2 (a well-known metal–organic framework) via a stable amido linkage. A cooperative effect of proline (amino group) and UiO-66-NH2 (in situ-derived amide species) was observed to play a promotional role in the proceeding of thia-Michael addition, resulting in a high TOF value of 1124.3 h–1. A three-component “iminium” intermediate was illustrated to the key species approaching the product β-thioketone. Moreover, the UiO-66-NH-proline could be easily recovered from the reaction mixture and recycled for at least five times with a slight loss of activity.

Visual sensing of CO2 in air with a 3-position modified naphthalimide-derived organogelator based on a fluoride ion-induced strategy

A new low-molecular-weight organic gelator derived from butyl naphthalimide having a naphthyl group attached at the 3-position with the amido linkage was synthesized. The synthesized gelator could form stable gels in several organic solvents. Scanning electron microscopy (SEM), temperature-dependent 1H NMR spectra, UV–vis spectroscopy, and PXRD were involved in the characterization of the obtained gels. Furthermore, the solution derived from the stimuli of fluoride ions to the DMSO gel were found to allow a naked-eye sensing of CO2 stream through the solution-to-gel transition, as well as the quantitative analysis via fluorescence enhancement. Moreover, the present sensing system could also detect CO2 directly in air via the phase transformation which could provide a visual means for CO2 sensing in a confined space.

Wang resin-supported enantioselective catalysts for the asymmetric Michael additions of acetone to β-nitroolefins

Two Wang resin-supported (1R,2R)-(+)-1,2-DPEN(DPEN=diphenylthylenediamine) catalysts were synthesized from cyanuric chloride and trimesoyl chloride, respectively. These two catalysts were characterized by FTIR, TGA and elemental analysis. The results demonstrated that (1R,2R)-(+)-1,2-DPEN was successfully bonded to the surface of Wang resin through the amido linkage. Subsequently, the asymmetric Michael addition of acetone to β-nitrostyrene was employed to evaluate their catalytic performance. It was found that the catalyst generated from trimesoyl chloride exhibited much better catalytic behavior than our previously reported catalyst, likely attributed to the multiple hydrogen-bond interaction between β-nitrostyrene and amide group, which made the catalytic transition intermediates more stable. Under the optimal conditions, 76.1% β-nitrostyrene conversion and 93.8% enantioselectivity were obtained. Finally, the generality of this catalyst was examined with Michael additions of acetone to β-nitroolefins and excellent enantioselectivities(91.9% to 99.9%) were achieved.

Development of an icELISA and immunochromatographic strip for detection of norfloxacin and its analogs in milk

ABSTRACTWe developed a monoclonal antibody (mAb) to detect norfloxacin (NOR) using a novel hapten by introducing an amino group via amido linkage into the piperazine ring of NOR. The sensitivity of an indirect competitive enzyme-linked immunosorbent assay (icELISA) based on this mAb showed an improved IC50 value from 1.18 to 0.12 ng/mL and the limit of detection from 0.37 to 0.05 ng/mL by using a heterologous coating (pazufloxacin coupled to ovalbumin). The recovery rate for NOR in milk ranged from 77.3% to 117.8%. Cross-reactivity (CR) experiments showed good CR with nine common fluoroquinolone analogs: pefloxacin, lomfloxacin, ciprofloxacin, enrofloxacin, dafloxacin, sparfloxacin, ofloxacin, marbofloxacin and flumequine. Furthermore, based on this antigen–antibody combination, an immunochromatographic strip with cut-off value of 1 ng/mL was developed. Given their good sensitivity and CR, the developed icELISA and immunochromatographic strip could be useful for detection of NOR and its analogs in milk.

Synthesis, characterization and biological activity of Rhein-cyclodextrin conjugate

Cyclodextrin conjugate complexation is a useful method to enhance the solubility and absorption of poorly soluble drugs. A series of new Rhein-β-cyclodextrin conjugates (Rh-CD conjugates) have been synthesized and examined. Rhein is covalently linked with the β-CD by amido linkage in a 1:1 molar ratio. The conjugates were characterized by 1H NMR, 13C NMR, HRMS, powder X-ray diffraction (powder XRD) as well as thermogravimetric analysis (TGA). The results reveal that incorporation of β-CD could improve the aqueous solubility of Rhein and the cytotoxicity against hepatocellular carcinoma (HepG2) cell line as well as antibacterial activity against three organisms. The improved biological activity and the satisfactory water solubility of the conjugates will be potentially useful for developing novel drug-cyclodextrin conjugates, such as herbal medicine.

Structure of an Amino Acid-Decorated Exopolysaccharide Secreted by a Vibrio alginolyticus Strain.

Vibrio alginolyticus (CNCM I-4994) secretes an exopolysaccharide that can be used as an ingredient in cosmetic applications. The structure was resolved using chromatography and one- and two-dimensional NMR spectroscopy experiments. The results show that the carbohydrate backbone is made of two residues: d-galacturonic acid and N-acetyl-d-glucosamine (GlcNac), which together constitute a tetrasaccharide repetition unit: [→3)-α-d-GalA-(1→4)-α-d-GalA-(1→3)-α-d-GalA-(1→3)-β-GlcNAc(1→]. Two amino acids, alanine and serine, are linked to GalA residues via amido linkages. The position and the distribution of the amino acids were characterized by two-dimensional NMR spectroscopy. To our knowledge, this is the first description of a structure for a marine exopolysaccharide decorated with an amino acid.

Synthesis and Reactivity of a Neutral, Three‐Coordinate Platinum(II) Complex Featuring Terminal Amido Ligation

AbstractA crystallographically characterized three‐coordinate, formally 14 electron PtII complex 1 featuring terminal amido ligation is reported. Computational analysis revealed relatively weak π donation from the amide lone pair to platinum and supports a 14‐electron assignment for 1. Stoichiometric reactivity studies confirmed the viability of net OH and CH addition across, as well as isonitrile insertion into, the terminal platinum–amido linkage of 1.

Isosorbide based chiral polyurethanes: optical and thermal studies

A new class of chiral polyurethanes containing amido linkages in the polymer backbone have been synthesized by reacting toluene diisocyanate with isosorbide (IS) chiral moiety and the chromophores [N,N′-ethane-1,2-diyl bis(6-hydroxy hexanamide), N,N′-butane-1,4-diyl bis(6-hydroxy hexanamide) and N,N′-hexane-1,6-diyl bis(6-hydroxy hexanamide)]. The corresponding chromophores were obtained by the aminolysis of e-caprolactone by using the diamines, diaminoethane, diaminobutane and diaminohexane, respectively. All the polymers were synthesized according to the symmetry conditions so as to obtain the non-centrosymmetric environment. A series of polyurethanes were synthesized by varying the chiral–chromophore composition. The polyurethanes developed were characterized by optical and thermal methods.

Introduction of ester and amido functions in tetrairon(iii) single-molecule magnets: synthesis and physical characterization

Tetrairon(III) complexes with a propeller-like structure derived from [Fe(4)(OMe)(6)(dpm)(6)] (1) (Hdpm = 2,2,6,6-tetramethylheptane-3,5-dione) are providing a growing class of Single Molecule Magnets (SMMs) displaying unprecedented synthetic flexibility and ease of functionalization. Herein we report the synthesis, crystal structures and magnetic properties of two novel tetrairon(III) SMMs, [Fe(4)(esterC5)(2)(dpm)(6)] (2) and [Fe(4)(amideC5)(2)(dpm)(6)].Et(2)O.4MeOH (3.Et(2)O.4MeOH), in which functionalization of the cluster core is achieved using ester and amido linkages, respectively. To this aim, two new tripodal ligands were prepared by acylation of pentaerythritol (2,2-bis(hydroxymethyl)propane-1,3-diol) and TRIS (2-amino-2-(hydroxymethyl)propane-1,3-diol), namely H(3)esterC5 = RC(O)OCH(2)C(CH(2)OH)(3) and H(3)amideC5 = RC(O)NHC(CH(2)OH)(3) with R = n-butyl. The compounds were structurally investigated by single-crystal XRD, which demonstrated coordination of the tripodal ligands to the cluster core. The products display SMM behavior with anisotropy barriers U(eff)/k(B) congruent with 11 K due to a high-spin (S = 5) ground state and an easy axis anisotropy, described by D = -0.421 cm(-1) in 2 and -0.414 cm(-1) in 3.Et(2)O.4MeOH. The departure of U(eff) from the total splitting of the S = 5 ground multiplet, U/k(B) congruent with 15 K, has to be ascribed to the sizeable rhombic anisotropy that characterizes the two compounds (E = 0.021 cm(-1) in 2 and 0.019 cm(-1) in 3.Et(2)O.4MeOH), as confirmed by master matrix calculations of the temperature-dependent relaxation time.