Al Ions Research Articles

Microstructure evolution and oxidation resistance of plasma sprayed AlSi-doped AlCoCrFeNi coatings with post-annealing

High entropy alloy (HEA) coatings of equimolar AlCoCrFeNi typically exhibit a lower oxidation rate at high temperatures by forming a protective passivation film. However, the metal elements consumption during long-term oxidation limitted the application. In this work, AlCoCrFeNi HEA coatings doped by AlSi as a supplement to passivation elements were prepared by atmospheric plasma spraying (APS), and AlSi capsules were diffused uniformly into the coating through annealing treatment to offset the element consumption during high-temperature oxidation. Results showed that annealing promoted Al and Si atoms diffusing into the solid solution, which stabilized BCC and inhibited FCC formation. During the oxidation at 900 °C, a protective Al2O3 film was formed on the coating surface, and AlSi capsules continuously transported Al ions to the consumption zone and reduced oxidation rate to 0.0015 g/cm2. The HEA coating doped by passivation element capsules provided a new approach for the design of novel antioxidant coatings.

Rehabilitation of a degraded acid Mediterranean soil after 11 years of by‐product calcium amendments and pasture improvement

AbstractThe clearing of natural vegetation and tillage for agricultural purposes makes acid soils highly vulnerable to degradation, resulting in significant losses of soil fertility and crop productivity. This work focused on nature‐based agricultural solutions to rehabilitate degraded acid soils in low‐resource systems. We studied after 6 and 11 years how the introduction of a legume‐rich pasture replacing a natural pasture or a tilled forage crop, with and without Ca‐amendment, contributed to recover the soil health, the fertility and the productivity of degraded Ultisols in Western Spain. Industrial by‐products, mainly sugar foam, were used as Ca‐amendment to promote circular economy. The Ca‐amendment factor influenced soil chemistry to 30 cm depth, while the type of soil use affected soil organic matter (SOM) to 15 cm; and both factors had positive effects on biomass productivity. Except for pH and Ca, no interaction between factors was found. Ca‐amendment increased nutrient availability and soil pH, and Al ion precipitated at 0–15 cm depth. As a result, biomass production increased by 35% relative to no Ca‐amendment. Forage cop produced 66% more biomass than pastures, but this increase did not translate into an increase in SOM. In fact, the legume‐rich pasture was the best option to recover soil organic C and N levels, earlier and deeper. Over the 11 years, the use of pastures and Ca‐amendment enhanced biomass production stability. Relative to natural, the improved pasture did not increase plant biomass but provided higher biomass stability and quality in terms of legume abundance, which was promoted when sugar foam was applied. Pastures also favoured key biological variable as earthworm's population, increasing it by four times with respect to forage crops. Compared to the non‐amended and unfertilized natural pasture out of the experiment, the use of improved pasture, followed by natural pasture, combined with sugar foam and fertilization enhanced soil health, soil fertility and biomass production stability. Thus, this solution has proven effective for restoring degraded acid soils, promoting diversity and mitigating climate change, while offering a more economically beneficial alternative.

Trace element analysis and luminescence behavior of quartz in pegmatites of the Tørdal Region, Norway

This publication presents a study on the mineral chemistry and luminescence properties of quartz samples from pegmatites of the Tørdal region in Norway. A total of 12 samples were analyzed using Secondary Ion Mass Spectrometry (SIMS), Electron Paramagnetic Resonance Spectroscopy (EPR), and Cathodoluminescence (CL) to gain insights into their trace element concentration and distribution as well as their luminescence behavior. The samples are characterized by different Cl emissions at 450 nm, 500 nm 650 nm and an additional shoulder at 390 nm, which is only partially visible due to the absorption of the glass optics. Of these luminescence bands, the 500 nm band is the most dominant in most samples and it is characterized by an initial blue-green luminescence, which is not stable under electron irradiation. Moreover, it is characterized by a heterogeneous distribution within the samples. This luminescence can be mostly assigned to [AlO4/M+]0 defects, with charge compensation mostly achieved by Li+. Analyses by EPR spectroscopy prove the dominance of structurally bound Al, Li, and Ti ions in the investigated samples. Further analyses using SIMS mapping demonstrate that Na and K are mainly bound to micro fractures or inclusions, suggesting a limited role in the compensation of the luminescence centers. Additionally, the SIMS mappings show that some samples contain Al-rich clusters of 10 to 20 μm in diameter, whereas other trace elements are characterized by a homogeneous distribution. These clusters correspond to bright luminescence areas in size and shape and could potentially indicate H+ compensated [AlO4/M+]0 defects.

Transcription factor SlSTOP1 regulates Small Auxin-Up RNA Genes for tomato root elongation under aluminum stress.

Aluminum (Al) stress, a prevalent constraint in acidic soils, inhibits plant growth by inhibiting root elongation through restricted cell expansion. The molecular mechanisms of Al-induced root inhibition, however, are not fully understood. This study aimed to elucidate the role of Small Auxin-up RNAs (SlSAURs), which function downstream of the key Al stress-responsive transcription factor SENSITIVE TO PROTON RHIZOTOXICITY 1 (SlSTOP1) and its enhancer STOP1-INTERACTING ZINC-FINGER PROTEIN 1 (SlSZP1), in modulating root elongation under Al stress in tomato (Solanum lycopersicum). Our findings demonstrated that tomato lines with knocked out SlSAURs exhibited shorter root lengths when subjected to Al stress. Further investigation into the underlying mechanisms revealed that SlSAURs interact with Type 2C Protein Phosphatases (SlPP2Cs), specifically D-clade Type 2C Protein Phosphatases (SlPP2C.Ds). This interaction was pivotal as it suppresses the phosphatase activity, leading to the degradation of SlPP2C.D's inhibitory effect on plasma membrane H+-ATPase. Consequently, this promoted cell expansion and root elongation under Al stress. These findings increase our understanding of the molecular mechanisms by which Al ions modulate root elongation. The discovery of the SlSAUR-SlPP2C.D interaction and its impact on H+-ATPase activity also provides a perspective on the adaptive strategies employed by plants to cope with Al toxicity, which may lead to the development of tomato cultivars with enhanced Al stress tolerance, thereby improving crop productivity in acidic soils.

Deposition of highly crystalline AlScN thin films using synchronized high-power impulse magnetron sputtering: From combinatorial screening to piezoelectric devices

With the integration of 5G in day-to-day devices and the foreseeable 6G revolution, demand for advanced radio frequency (RF) microelectromechanical systems (MEMS) is growing. Aluminum scandium nitride (AlScN) has emerged as the material of choice for many of those applications due to its superior piezoelectric and electromechanical properties compared to aluminum nitride (AlN). However, synthesizing high-quality, textured AlScN thin films is challenging. Alloying of Sc in AlN induces structural frustration leading to strain, defects, disoriented grains, and disrupted crystal symmetry during growth. Higher deposition temperatures, while improving crystalline quality, risk undesirable phase precipitation and limit industrial sustainability. In addition, future MEMS technologies also demand conformal and textured coatings over diverse topographies. Addressing these challenges collectively requires new and innovative synthesis approaches. In this study, we investigate the feasibility of ionized physical vapor deposition to deposit highly oriented AlScN films with minimal defects at lower temperatures. To this end, we employ combinations of different deposition approaches, such as metal-ion synchronized (MIS) high-power impulse magnetron sputtering (HiPIMS). Leveraging the high ionization rates of HiPIMS and optimally timed substrate bias potentials, we selectively bombard the growing film with Al and/or Sc ions to enhance the adatom mobility at low temperatures while simultaneously providing the ability to tune stress and coat complex structures conformally. The nonequilibrium solubility of Sc in wurtzite AlN under different conditions is investigated using a combinatorial deposition approach. Promising candidates with ∼20% Sc composition are isolated and characterized for crystallinity and residual stress. Disoriented grains, a significant issue in growing AlScN films, are observed through atomic force microscopy and found to be completely removed by substrate rotation and application of substrate biasing. The measured piezoelectric response of the films with approximately 20% Sc concentration ranges from 6.3 to 8.8 pm/V, in line with density functional theory predictions and experimentally reported values for films deposited in a production tool with coplanar geometry. At the same time, MIS-HiPIMS-deposited films offer unique properties and flexibility to tune their stress state and structural properties, thus presenting exciting opportunities for the fabrication of advanced RF filters and next-generation MEMS devices. Published by the American Physical Society 2024

Theoretical Study of the Multiferroic Properties of Pure and Ion-Doped Pb5M3F19, M = Fe, Cr, Al.

In a first theoretical investigation of the multiferroic properties of Pb5Fe3F19 (PFF) and Pb5Cr3F19 (PCF), we analyze their magnetic, ferroelectric, and dielectric characteristics as functions of temperature, magnetic field, and ion doping concentration using a microscopic model and Green's function theory. The temperature-dependent polarization in PFF and PCF shows a distinctive kink at the magnetic Neel temperature TN, which vanishes when an external magnetic field is applied, indicating the multiferroic behavior of these two compounds. Ion doping effectively tunes the properties of PFF and PCF. In PFF, Cr ion doping leads to a decrease in the Neel temperature TN, while Cr and Al ion doping lowers the ferroelectric Curie temperature TC. In the case of PCF, we observe the enhancement of TC by Fe ion doping and the reduction by Al ion doping. The last result coincides well quantitatively with the experimental data. Additionally, the magnetodielectric coefficient of PFF is enhanced with the increasing magnetic field.

Identification and Analysis of Aluminum-Activated Malate Transporter Gene Family Reveals Functional Diversification in Orchidaceae and the Expression Patterns of Dendrobium catenatum Aluminum-Activated Malate Transporters.

Aluminum-activated malate transporter (ALMT) genes play an important role in aluminum ion (Al3+) tolerance, fruit acidity, and stomatal movement. Although decades of research have been carried out in many plants, there is little knowledge about the roles of ALMT in Orchidaceae. In this study, 34 ALMT genes were identified in the genomes of four orchid species. Specifically, ten ALMT genes were found in Dendrobium chrysotoxum and D. catenatum, and seven were found in Apostasia shenzhenica and Phalaenopsis equestris. These ALMT genes were further categorized into four clades (clades 1-4) based on phylogenetic relationships. Sequence alignment and conserved motif analysis revealed that most orchid ALMT proteins contain conserved regions (TM1, GABA binding motif, and WEP motif). We also discovered a unique motif (19) belonging to clade 1, which can serve as a specifically identified characteristic. Comparison with the gene structure of AtALMT genes (Arabidopsis thaliana) showed that the gene structure of ALMT was conserved across species, but the introns were longer in orchids. The promoters of orchid ALMT genes contain many light-responsive and hormone-responsive elements, suggesting that their expression may be regulated by light and phytohormones. Chromosomal localization and collinear analysis of D. chrysotoxum indicated that tandem duplication (TD) is the main reason for the difference in the number of ALMT genes in these orchids. D. catenatum was chosen for the RT-qPCR experiment, and the results showed that the DcaALMT gene expression pattern varied in different tissues. The expression of DcaALMT1-9 was significantly changed after ABA treatment. Combining the circadian CO2 uptake rate, titratable total acid, and RT-qPCR data analysis, most DcaALMT genes were highly expressed at night and around dawn. The result revealed that DcaALMT genes might be involved in photosynthate accumulation. The above study provides more comprehensive information for the ALMT gene family in Orchidaceae and a basis for subsequent functional analysis.

Corrosion Behavior of Aluminum in Fossil Diesel Fuel and Biodiesel From Chicken Eggshell‐Alumina‐Catalyzed Waste Cooking Oil

ABSTRACTTo curb environmental pollution emanating from the exhausts of engines using fossil diesel fuel (DF), studies on the use of biodiesel from renewable energy source are ongoing. However, engine components have been observed to corrode easily in biodiesels. In this study, a comparative study of the corrosion rate of aluminum coupon (AC) in biodiesel from waste cooking oil over chicken eggshell‐supported alumina catalyst (WCOB) and fossil DF was executed. Weight loss method was used to examine the corrosion rate. Highest corrosion rates of 0.0381 and 0.0052 mm year−1 were recorded for AC in WCOB and DF, respectively. The developed mathematical models proved effective for corrosion rate prediction. At optimum prediction, the minimum corrosion rates for the AC in WCOB and DF were 1.822 × 10−3 and 1.222 × 10−3 mm year, respectively. Characterization revealed pits formation and presence of oxygen and carbon on AC surface with loss of Al ions from the AC surface into WCOB and DF after corrosion. In conclusion, all results revealed high corrosion rates of AC in WCOB than DF.

Evaluation of the Stability and Antibacterial Activity of Burow's and Neo-Burow's Solutions was Prepared Using Different Methods

Burow's solution is a 13% aluminum acetate solution used for treating chronic suppurative otitis media. However, multiple formulations for Burow's and neo-Burow's solutions are used as in-hospital preparations. Each formulation uses different types and amounts of reagents, and takes a different time to prepare. Thus, the ions, including aluminum ion (Al3+), and other molecules in the prepared Burow's and neo-Burow's solutions are not identical, and the pH also differs. Furthermore, details about the antibacterial activity of these preparations are unknown. This study evaluated the stability and antibacterial activity of four Burow's and two neo-Burow's solutions prepared using different methods. Preparation times ranged from 20 min to 3 d, and the pH ranged from 2.2 to 4, meaning some solutions were more acidic or more basic than the pH 3 devised by Burow. In addition, the Al3+ concentrations ranged from 0.05 to 1.51 mol/L, meaning some solutions were more concentrated or diluted than 13% aluminum acetate (0.64 mol/L). One of the Burow's solutions we prepared produced a white residue after 14 d, making it difficult to ensure stability. In addition, confirming the antibacterial activity of another Burow's solution against the test bacteria was problematic. Despite the differences in pH and Al3+ concentrations between the various Burow's and neo-Burow's solutions, the antibacterial activity was equivalent. It was considered necessary to use the basic data obtained in this study to select a formulation for each hospital. Evaluation of the antibacterial activity of each formulation in clinical settings will be a subject for future study.

A Pyridazine‐Based Cadmium(II) Organic Framework With pcu Topology as a Luminance Sensor to Nitrobenzene, Al(III), and Cu(II) Ion

ABSTRACTIn the field of water decontamination, the design of luminance sensor for sensitive detection of heavy metal ion toxic and nitroaromatic compounds are important and challenging. Herein, a new luminescent Cd(II) metal–organic framework (MOF), {[Cd2(H2O)3(4‐CPCA)2]·2H2O}n (SNUT‐27) (H2(4‐CPCA) = 1‐(4‐carboxyphenyl)‐4‐oxo‐1,4‐dihydropyridazine‐3‐carboxylic acid) was obtained by the reaction of flexible ligand H2(4‐CPCA) and Cd(II) ions, characterized by single crystal X‐ray diffraction, PXRD, FT‐IR, and TGA, the samples were further analyzed. The analysis of single crystal X‐ray diffraction showed that SNUT‐27 possesses a distinct three‐dimensional spatial arrangement and demonstrates impressive fluorescence properties. Particularly, SNUT‐27 showed a highly sensitive response to the nitro‐aromatic compounds nitrobenzene by fluorescence quenching, and in contrast, showed a fluorescence enhancement response to Al3+ and Cu2+. SNUT‐27 can be effortlessly recycled by simply rinsing with water post‐sensing experiments, showcasing its reusability. Additionally, potential detection mechanisms have been explored.

Constructing Electronic/Ionic‐Conductive Hydrogel with Soft Compliance and High Conductivity as Flexible Strain Sensor

Flexible sensors are garnering substantial interests for various promising applications, including medical electronics, environmental monitoring, and wearable devices. Developing a flexible sensor with high compliance, high sensitivity, and high reliability through the construction of a novel composite conductive hydrogel based on the synergistic enhancement effect of conductive polymers and metal ions is a remarkable achievement. Herein, an electronic/ionic‐conductive double network hydrogel (polypyrrole (PPy)/carboxymethyl cellulose (CMC)‐Al3+/polyvinyl alcohol (PVA)) with soft compliance, highly conductivity, and stability is presented. Moreover, owing to the synergistic reinforcement effect of the relatively immobilized “islands” of PPy particles and large amounts of movable “bridges” of aluminum ions (Al3+) within the double network hydrogel, the as‐optimized PPy/CMC‐Al3+/PVA composite gels exhibit excellent conductivity (σ = 3.47 ± 0.25 S m−1) and mechanical properties (E = 18.53 ± 0.67 kPa). Furthermore, it has been developed as strain sensors with relatively high linear sensitivity (gauge factor = 2.58) within a broad linearity range (0–400%). It can also be served as a monitoring devices for subtle physiological signals emanating from various parts of the human body. The robust sensor has great potential to be developed as wearable electronic devices and applied in healthcare monitoring fields.

Possible metal oxide cathode materials for Al-ion batteries: A first principle study

This study investigates various Aluminum (Al) -ion oxide cathode materials, considering their structural properties/stability, cell voltage, band gap analysis, and electrical/ion-diffusion rate-capability. The studied materials are AlMn2O4, AlMoO3, AlTiO2, AlV2O5, AlLiCo2O4, and AlCo2O4. The calculations are conducted using Density Functional Theory (DFT) methods, specifically Generalized Gradient Approximation (GGA) and GGA + U. We employ various noble approaches and techniques to assess the properties of the materials. The findings reveal structural stability after deintercalation of Al ion for all the considered structures. AlMn2O4 exhibits the highest stability due to its strong structural framework, while TiO2 is suspected for this property. Voltage estimation suggests higher possible voltages for AlCo2O4 and AlLiCo2O4 materials, despite not being experimentally examined. Calculated intrinsic-like and extrinsic-like band gaps demonstrate the highest conduction for AlCo2O4. Evaluation of rate-capability recognizes the highest electrical/ion-diffusion rate-capability for AlCo2O4 and AlLiCo2O4. Finally, this study introduces two new superior electrode materials for Al-ion batteries (AIBs), i.e. AlLiCo2O4 and AlCo2O4, with promising properties for future AIBs.

The tonoplast-localized OsTIP2;1 is involved in aluminum detoxification in rice

Aluminum (Al) stress is a significant issue in acidic soils, severely affecting crop growth and yield. Rice is notably resilient to Al toxicity, yet the internal tolerance mechanisms remain inadequately addressed. Here, we examined the role of OsTIP2;1, a tonoplast-bound intrinsic protein (TIP), in rice's internal Al detoxification. Our findings reveal that OsTIP2;1 expression was quickly and explicitly activated by Al ions in roots but not in shoots. The OsTIP2;1-GFP protein localizes to the tonoplast in plant and yeast cells. Non-functional ostip2;1 rice mutants were more vulnerable to Al toxicity. In the roots, the ostip2;1 mutants exhibited considerably lower levels of Al in the cell sap, primarily the vacuolar contents, than in the wild-type plant. Moreover, the ostip2;1 mutants showed reduced Al accumulation in the roots but increased translocation to the shoots. Heterologous expression of tonoplast-localized OsTIP2;1 in yeast led to enhanced Al tolerance, suggesting that OsTIP2;1 facilitates Al sequestration to the vacuole. These findings indicate that OsTIP2;1 mediates internal detoxification by transporting Al into the vacuole in the root and restricting its transport to above-ground tissues, thus contributing to Al resistance in rice.

Analysis of Lattice Damage in 4H-SiC Epiwafers Implanted with High Energy Al Ions at Elevated Temperatures

4H-SiC wafers with 12 µm epilayers were blanket implanted to a depth of 12 µm with 5 x 1016 cm-3 Al ions via Tandem Van de Graaff accelerator located at Brookhaven National Laboratory with energy range of 13.8 to 65.7 MeV at room temperature, 300 °C and 600 °C. High resolution X-ray diffraction measurements reveal the implanted layers are characterized by tensile strains. However, the dynamic annealing process reduces the level of tensile strains as the temperature of implantation is increased. Analysis indicates that the implant temperature of 600 °C is not sufficient to minimize lattice damage due to implantation and a higher implantation temperature will be required. This preliminary experiment will guide the optimization of implantation conditions for fabricating superjunction devices.

A novel process for producing Al-Si alloy utilizing aluminum-silicon oxide extracted from coal fly ash

As a kind of solid waste rich in aluminum and silicon resources, the comprehensive utilization of coal fly ash (CFA) will be of great significance to reduce environmental pollution and improve economic benefits. This work proposed a facile and environmentally friendly cleaning process for producing Al-Si alloy by molten salt electrolysis from CFA extract, aluminum-silicon oxide (ASO). The dissolution behavior and dissolution reaction mechanism of ASO were studied by high temperature visual dissolution experiment, thermodynamics analysis and phase analysis. Due to the chemical reaction between ASO and cryolite-based melt, ASO powder dissolves rapidly in melt and the dissolution rate of ASO is not determined by the phase compositions but by the mass ratio of Al2O3/SiO2. For replenishing the oxide concentration in the electrolyte as quick as possible, the proper mass ratio of Al2O3/SiO2 is in the range of 0.75–7.5. The electrochemical co-reduction behavior of Si (IV) and Al (III) ions on the W electrode was performed by cyclic voltammetry and square wave voltammetry. The results indicated that the reduction of Si (IV) ion in the melt was a two-step irreversible process. Hypoeutectic Al-Si alloy and eutectic Al-Si alloy were prepared by galvanostatic electrolysis using ASO as raw material. This innovative technology can realize high-value recycling of CFA resources and low carbon emission, low energy consumption production of Al-Si alloy.

Free-Standing 3C-SiC P-Type Doping by Al Ion Implantation

Free standing wafers of the cubic polytype of silicon carbide (3C-SiC) grown on micromachined silicon substrates can be a platform for new power electronic devices, provided that suitable device fabrication processes are understood and optimized. In this frame, p-type doping is still an open issue, as results on the electrical activation of ion implanted Al in 3C-SiC are limited. This work analyses high level p-type doping with post-implantation annealing carried out at temperatures in the range 1650-1850 °C with different durations. A coherent picture emerges, showing that the resulting resistivity in 3C-SiC Al-implanted layers is higher than the one obtained in 4H-SiC implanted layers, the result being ascribed to low carrier mobility and possibly presence of compensation centers, rather than to poor Al electrical activation. The reported results highlight the importance of working on material and processing optimization.

TEM Investigation on High Dose Al Implanted 4H-SiC Epitaxial Layer

Within this work, the effect of high dose Al ion implantation on 4H-SiC epitaxial layer is displayed. Through TEM investigation it is demonstrated that the implanted surface is suitable as seed for subsequent epitaxial regrowth generating a crystal free of extended defects. In order to assess the defects within the projected range of the ion implanted area, High Angle Annular Dark Field STEM (HAADF-STEM) analyses were performed demonstrating the atomic arrangement of the lattice in correspondence of the dislocation loop and the deviation of the crystallographic planes of 4H-SiC, driven by stress relaxation, that determine the staircase configuration of the implant pattern. Further emphasis is given to the detailed analysis of the precipitates atomic structure, whose preferential localization is ascertained. Using Energy-Dispersive X-ray spectroscopy (EDS) analysis, the precipitate is finally established as Al crystal with an FCC structure.

The Effective Separation of Gallium, Vanadium, and Aluminum from a Simulated Bayer Solution by Resin Exchange.

The effective recovery of gallium from wastewater discharge in the Bayer process is promising for the long-term development of gallium resources. The adsorption and desorption behavior of gallium (Ga), vanadium (V), and aluminum (Al) ions on a strong acidic styrene cation exchange resin (JK resin) from a simulated Bayer solution was systematically investigated by static experiments. The results showed that the optimum conditions for separating Ga from V and Al were at low temperatures and short contact times, with 78.30%, 15.16%, and 6.63% of the adsorption efficiency at 25 °C and 60 min, respectively, for Ga, V, and Al. The adsorption kinetics of Ga3+ conformed to the pseudo-second order model, and the static saturation adsorption capacity was 18.25 mg/g. The Langmuir model fitted the adsorption isotherm of gallium well, and the maximum adsorption capacity was 1.11 mg/g at 25 °C. FT-IR spectroscopy and XPS showed that the mechanism of the Ga3+ adsorption was only related to the interaction of the oxygen atoms of the amide oxime group (C=NOH). The separation of Ga, V, and Al can be achieved by desorbing 98% of Al with low concentrations of ammonia and 90% of Ga with low concentrations of hydrochloric acid. The results indicate that JK resin is an efficient adsorbent for separating gallium and vanadium in alkaline solutions.

Analysis of Antioxidant Effects of Quercetin, Rutin and Phagnalon Rupestre on Rats Intoxicated by Aluminium

Aluminium (Al) is one of the most abundant chemical elements in nature and metal in the earth’s crust. Accumulation of Aluminium ions (Al3+) in target tissues results into formation of oxygen radicals causing oxidative damage through inducing cytotoxicity. The aim of this study is to analyse the antioxidant effect of selected polyphenols (quercetin, rutin and a medicinal plant phagnalon rupestre) on rats intoxicated by aluminium with specific focus on the heart.This experiment was carried out on 6 groups of wistar albino rats ,group 1; positive control, group 2; Al male intoxicated group treated with quercetin, group 3; Al male intoxicated group treated with rutin, group 4; Al female intoxicated, group 5; Al intoxicated treated with phagnalon rupestre , group 6; female control. Several Biochemical assays were carried out such as protein test, Thiobarbituric acid reactive substance (TBARS) assay, catalase assay (CAT), glutathione-s-transferase (GST) assay, superoxide dismutase (SOD) assay, Glutathione reduced and glutathione peroxidase (GSH & GPX) assay, lipids (cholesterol & triglycerides) assays. Aluminium intoxicated group showed decrease in the content of protein compared to the control and treated groups. Aluminium intoxicated group showed an increase in the activity of thiobarbituric reactive substances (TBARS) but a significant decrease in the activity of catalase (CAT), glutathione S transferase assays (GST) compared to the control group. Biomarkers of oxidative stress significantly reduced in heart Al-induced oxidative stress by administration of Quercetin. Therefore, Quercetin is an effective antioxidant against oxidative stress caused by free radicals produced because of aluminium exposure. Keywords: antioxidant ;aluminium ; quercetin ; rutin ; phagnalon rupestre

Impurity transport in PISCES-RF*

Abstract Linear plasma devices (LPD) utilizing a helicon plasma source, a high density light ion source, can generate impurities due to progressive erosion of the radio frequency (RF) transmission window caused by rectified sheath voltage. These source-born impurities can entrain and be transported by the plasma toward a target, affecting plasma-material interaction studies. Earlier work on material testing in Prototype-Materials Plasma Exposure eXperiment at ORNL revealed significant source impurity deposition on downstream targets. However, using a similar RF source, no target impurity deposition is observed in Plasma Interaction Surface Component Experimental Station (PISCES)-RF despite evidence of RF window erosion in the source region, thereby motivating the present work. Experimentally, using various magnetic field configurations upstream of the PISCES-RF plasma source and seeding titanium (Ti) impurities at various axial locations, impurity transport and deposition along the machine axis were investigated. It was found that Ti deposition was localized to the side of the plasma source where the Ti impurity was seeded. In contrast, aluminum (Al) deposition, originating from the sputtering of the helicon window, occurred predominantly upstream of the plasma source, suggesting an asymmetry in the axial transport of eroded RF window material. These observations suggest a stagnation of the parallel plasma flow immediately downstream of the plasma source, with impurity ions remaining unmagnetized near the source upstream. Al deposition in magnetic field-free regions in PISCES-RF indicates that sputtered Al impurities likely remained neutral due to their large ionization mean-free path under PISCES-RF conditions. Plasma modeling and simulation supported this, indicating that Al-neutrals transport toward the helicon source upstream for low electron density cases. It was found that the Larmor radius of the Al ions was greater than the plasma radius towards the source upstream and remained weakly magnetized in PISCES-RF, meaning that plasma source-born impurities are not efficiently entrained in the plasma flow. These findings provide critical insights into impurity transport in helicon plasma-based LPDs.