Air Samples Research Articles

Up in the air: Presence and collection of DNA from air and air conditioner units.

Biological material is routinely collected at crime scenes and from exhibits and is a key type of evidence during criminal investigations. Touch or trace DNA samples from surfaces and objects deemed to have been contacted are frequently collected. However, a person of interest may not leave any traces on contacted surfaces, for example, if wearing gloves. A novel means of sampling human DNA from air offers additional avenues for DNA collection. In the present study, we report on the results of a pilot study into the prevalence and persistence of human DNA in the air. The first aspect of the pilot study investigates air conditioner units that circulate air around a room, by sampling units located in four offices and four houses at different time frames post-cleaning. The second aspect investigates the ability to collect human DNA from the air in rooms, with and without people, for different periods of time and with different types of collection filters. Results of this pilot study show that human DNA can be collected on air conditioner unit surfaces and from the air, with air samples representing the more recent occupation while air conditioner units showing historic use of the room.

Pollution characteristics and health risk assessment of fine particulate matter and its metal elements during Chinese New Year

The Chinese Lunar New Year is a significant festival in China that leads to indoor and outdoor air pollution with distinct characteristics compared to normal times. In this study, indoor and outdoor air samples were collected and analysed to investigate the indoor and outdoor pollution of PM2.5 and its metal elements during the Chinese New Year. The findings reveal that there is a notable positive correlation between indoor and outdoor PM2.5 concentrations during the Chinese New Year, with outdoor concentrations being higher on average. The levels of PM2.5 concentrations indoors and outdoors started to increase on Chinese New Year’s Eve and peaked after the early hours of the Chinese New Year. The total concentrations of six metal elements (Cd, Cr, Ni, Cu, Pb and Zn) in indoor and outdoor PM2.5 during the Chinese New Year in 2022 were 738.73 ± 134.93 mg/kg and 1124.38 ± 553.14 mg/kg, respectively. Principal component analysis suggests that the main sources of indoor metal elements were from outdoor combustion sources and human activities, while outdoor sources were fireworks displays and emissions from coal combustion. Based on the U.S. EPA risk assessment carried out, both indoor and outdoor PM2.5 metal elements could pose a carcinogenic risk to adults.

A case study on the application of spore sampling for the monitoring of macrofungi.

Fungi play a vital role in ecosystem functioning, yet significant knowledge gaps persist in understanding their diversity and distribution leading to uncertainties about their threat status and extinction risk. This is partly owed to the difficulty of monitoring fungi using traditional fruiting body surveys. The present study evaluates airborne environmental DNA (eDNA) sampling as a monitoring tool with a focus on grassland macrofungi. We applied active and passive air sampling methods, complemented by extensive field surveys of waxcap and clavarioid fungi-species groups of high relevance for conservation. Twenty-nine species were recorded during the field surveys, 19 of which were also detectable by ITS2 metabarcoding of the collected samples. An additional 12 species from the studied genera were identified exclusively in air eDNA. We found that the patterns of species detection and read abundance in air samples reflected the abundance and occurrence of fruiting bodies on the field. Dispersal kernels fitted for the three dominant species predicted rapidly decreasing spore concentrations with increasing distance from fruitbodies. Airborne assemblages were dominated by a high diversity of common species, while rare and threatened red-listed species were under-represented, which underscores the difficulty in detecting rare species, not only in conventional surveys. Considering the benefits and drawbacks of air sampling and fruitbody surveys, we conclude that air sampling serves as a cost- and time-efficient tool to characterize local macrofungal communities, providing the potential to facilitate and improve future fungal monitoring efforts.

Emission of black carbon in heavy traffic areas of Jamshedpur and Ranchi: Risk exposure to humans

The suspended aerosol particulate matters are global issue towards the environmental loss as it contaminates the atmosphere. This study explains the comprehensive investigation of BC concentration and its health risk estimation in different topographical urbanites i.e., Jamshedpur (JSR), and Ranchi (RNC). The concentration of BC as 15.87 µgm-3 at JSR, and 12.16 µgm-3 at RNC using the portable aethalometer (AE-33) and air sampler (Envirotech APM 550 mini). The BC concentration was observed higher at JSR, it may be due to the high traffic load and industrial emission in AIADA region (Adityapur Industrial Area Development Authority). Similarly, concentration of PM2.5 was observed around 165.4 µgm-3, and 151.3 µgm-3 in above respective sites. The health risk was calculated around 17.4, 21.4, 10.2 and 16.7 number of PSC (passive smoking cigarette) per day concerning to health outcomes of LBW, PLFD, CM and LC respectively in JSR which observed higher compared to RNC (i.e., 10.6, 14.3, 8.5 and 12.8) which might be due to larger consumption of coal and fuel in Industrial city, JSR. Backward Trajectory analysis explained that the dispersal of airborne particulate matter mostly coming from southwestern part of India and Arabian sea in all the two sites.

CCl4 emissions in eastern China during 2021–2022 and exploration of potential new sources

According to the Montreal Protocol, the production and consumption of ozone-layer-depleting CCl4 for dispersive applications was globally phased out by 2010, including China. However, continued CCl4 emissions were disclosed, with the latest CCl4 emissions unknown in eastern China. In the current study, based on the atmospheric measurements of ~12,000 air samples taken at two sites in eastern China, the 2021–2022 CCl4 emissions are quantified as 7.6 ± 1.7 gigagrams per year. This finding indicates that CCl4 emissions continued after being phased out for dispersive uses in 2010. Subsequently, our study identifies potential industrial sources (manufacture of general purpose machinery and manufacture of raw chemical materials, and chemical products) of CCl4 emissions.

Vertical measurements of atmospheric CO2 and 14CO2 at the northern foot of the Qinling Mountains in China

The CO2 and 14CO2 levels in air samples from the northern foot of the Qinling Mountains (Xi'an, China) were determined. In 2021, a hexacopter unmanned aerial vehicle sampled air at different heights, from near-ground to 2000 m. The objectives of this study were to determine vertical characteristics of CO2 and 14CO2, the sources of different-height CO2, and the influence of air mass transport. The CO2 concentrations mainly exhibited a slight decreasing trend with increasing height during summer observations, which was in contrast to the increasing trend that was followed by a subsequent gradual decreasing trend during early winter observations, with peak CO2 levels (443.4 ± 0.4–475.7 ± 0.5 ppm) at 100–500 m. The variation in vertical concentrations from 20 to 1000 m in early winter observations (21.6 ± 19.3 ppm) was greater than that in summer observations (14.6 ± 14.3 ppm), and the maximum vertical variation from 20 to ∼2000 m reached 61.1 ppm. Combining Δ14C and δ13C vertical measurements, the results showed that fossil fuel CO2 (CO2ff, 56.1 ± 15.2 %), which mainly come from coal combustion (81.2 ± 3.4 %), was the main contributor to CO2 levels in excess of the background level (CO2ex) during early winter observations. In contrast, biological CO2 (CO2bio) dominated CO2ex in summer observations. The vertical distributions of CO2ff in early winter observations and CO2bio in summer observations were consistent with those of CO2 during early winter and summer observations, respectively. The strong correlation between winter CO2bio and ΔCO (r = 0.81, p < 0.01) indicated that biomass burning was the main contributor to CO2bio during early winter observations. Approximately half of the air masses originated from the Guanzhong Basin during observations. The results provide insights into the vertical distribution of different-sources of atmospheric CO2 in scientific support of formulating carbon emission-reduction strategies.

Fungal Spore Richness and Abundance of Allergenic Taxa: Comparing a Portable Impactor and Passive Trap Indoors and Outdoors in an Urban Setting

Fungal spores are common airborne allergens, and fungal richness has been implicated in allergic disease. Amplicon sequencing of environmental DNA from air samples is a promising method to estimate fungal spore richness with semi-quantification of hundreds of taxa and can be combined with quantitative PCR to derive abundance estimates. However, it remains unclear how the choice of air sampling method influences these estimates. This study compared active sampling with a portable impactor and passive sampling with a passive trap over different durations to estimate fungal spore richness and the abundance of allergenic taxa. Air sampling was conducted indoors and outdoors at 12 residences, including repeated measurements with a portable impactor and passive traps with 1-day and 7-day durations. ITS2 amplicon sequence data were transformed to spore equivalents estimated by quantitative PCR, repeated active samples were combined, and abundance-based rarefaction was performed to standardize sample coverage for estimation of genus-level richness and spore abundance. Rarefied fungal richness was similar between methods indoors but higher for passive traps with a 7-day duration outdoors. Rarefied abundance of allergenic genera was similar between methods but some genera had lower abundance for passive traps with a 1-day duration, which differed indoors and outdoors indicating stochasticity in the collection of spores on collocated samplers. This study found that similar estimates of fungal spore richness and abundance of allergenic taxa can be obtained using a portable impactor or a passive trap within one day and that increased passive sample duration provides limited additional information.

The study on biological exposure index of occupational exposure to arsenic and its inorganic compounds

Objective: To establish biological exposure index (BEI) of occupational exposure to arsenic and its inorganic compounds through occupational epidemiology and the regression analysis of internal and external exposure of workers. Methods: In November 2021, 125 workers with occupational exposure to arsenic and its inorganic compounds and 49 office administrators in a non-ferrous metal smelter in Yunnan Province were selected as the exposure group and control group, respectively. Air samples from the workplace of the study subjects on weekdays were collected and arsenic concentrations were determined. Urine samples were collected in end-of-work weekend and high performance liquid chromatography-inductively coupled plasma mass spectrometry (HPLC-ICP-MS) was used to detect the levels of trivalent inorganic arsenic (iAs(3+)) , pentavalent inorganic arsenic (iAs(5+)) , monomethyl arsenic (MMA) and dimethyl arsenic (DMA) in urine. The correlations between arsenic concentration in the workplace air and arsenic species in urine of workers were analyzed. Arsenic exposure concentration and the level of urinary arsenic (ΣiAs+MMA+DMA) of workers was analyzed by linear regression and the BEI of arsenic and its inorganic compounds in the workplace was proposed based on the results of micronucleus test. Results: The median of time-weighted average concentration (C(TWA)) of arsenic in the workplace air of the exposure group was 0.0116 mg/m(3), and the over-standard rate was 71.2% (89/125) . The concentrations of iAs(3+), iAs(5+), inorganic arsenic (iAs=ΣiAs(3+)+iAs(5+)) 、MMA、DMA and urinary arsenic in the exposure group were higher than those in the control group at the end of shift, and the differences were statistically significant (P<0.05) . The concentration of arsenic in the workplace air had the strongest correlation with the concentration of urinary arsenic at the end of the shift (r(s)=0.909, P<0.001) . The regression equation was lg (y) =7.662+2.968lg (x) (r=0.821, P<0.05) . According to the occupational exposure limit (OEL) of arsenic in China, the concentration of urinary arsenic in the end-of-work weekend was calculated to be 53.2 μg/L. Combined with the results of micronucleus test, the BEI of occupational exposure to arsenic and its inorganic compounds in the workplace was proposed to be 50 μg/L. Conclusion: The urinary arsenic in the end-of-work weekend can be used as a biomarker of occupational exposure to arsenic, and its BEI is recommended to be 50 μg/L.

Development of occupation-based exposure matrix of lead for Korean workers: challenges and opportunities.

Industry- and occupation-based carcinogen exposure matrices play a pivotal role in preventing occupational cancer. While the Korean CARcinogen EXposure (K-CAREX) has been developed in recent years to assess exposure prevalence and intensity by industry, the feasibility of constructing an occupation-based exposure matrix remains unexplored. Hence, the objective of this study is to explore the potential of combining the nationwide work environment measurement database (WEMD) and the special health examination database (SHED) to develop a comprehensive occupation-based exposure matrix. The WEMD provides information on airborne lead measurements, including industry codes, but it does not include data related to occupations. In contrast, the SHED contains information on both occupation and blood lead levels. By integrating these 2 databases, we attempted to assess airborne lead exposure levels by occupation. Additionally, we performed a rank correlation analysis to compare the airborne exposure levels with corresponding blood lead levels according to occupation. A total of 35 425 workers who both wore air samplers for lead and underwent special health examinations for lead were extracted between 2019 and 2021. An occupation-based exposure matrix was developed to evaluate the intensity of lead exposure across a range of occupations, encompassing 51 minor occupations and 70-unit occupations. Rank correlation analyses showed strong positive correlations between airborne lead and blood lead measurements according to occupation. Our study findings suggest that combining 2 nationwide surveillance databases can be an effective approach for creating an occupation-based exposure matrix. However, our results also highlight several limitations that need to be addressed in future studies to improve the accuracy and reliability of such matrices.

PM2.5-bound polycyclic aromatic hydrocarbons (PAHs): quantification and source prediction studies in the ambient air of automobile workshop using the molecular diagnostic ratio

The presence of polycyclic aromatic hydrocarbons (PAHs) in the atmosphere has been linked to health concerns, including cancer. Automobile workshops are significant contributors to PAH emissions due to their operations. Hence, this investigation aimed to identify and quantify the sources of PM2.5-bound PAHs in the ambient air of automobile workshops in Benin City, Nigeria, using molecular diagnostic ratios. PM2.5 samples were collected from 60 automobiles over 1 year, during the rainy (April to November) and dry (December to March) seasons of 2019. Sample collection utilized a low-volume air sampler with quartz filter paper, and extraction was performed using a 1:1 mixture of acetone and dichloromethane. The analysis involved an HP Agilent Technology 6890 Gas Chromatography (GC) system with a flame ionization detector. The annual average concentrations of PM2.5-bound PAHs in Benin City were 269.87 ± 249.32 ng/m3 (dry season) and 216.30 ± 204.89 ng/m3 (wet season). Molecular diagnostic ratios, such as Fl/(Fl + Py), An/(An + Phe), BaP/(BaP + Chry), BbF/BkF, InP/(InP + BghiP), and BaA/(BaA + Chr), aided in identifying PAH sources. Gasoline combustion, diesel combustion, traffic emissions, and emissions from automobile panel welders were found to be the primary sources of PAHs near vehicle workshops. These findings provide crucial insights for developing effective strategies to reduce emissions and protect public health in the air surrounding automobile workshops in Benin City.

Study on the implementation effect evaluation of Specifications of Air Sampling for Hazardous Substances Monitoring in the Workplace (GBZ 159-2004)

Systematically evaluate the implementation of Specifications of Air Sampling for Hazardous Substances Monitoring (GBZ 159-2004) , so as to provide technical basis for the future standard revision. The semi-structured interview method was used to interview the industry experts from centers for disease control and prevention, occupational disease prevention and control hospitals/institutes, employers, third-party technical service institutions and universities, and the induction method was used to refine the topics and relevant suggestions. Some technical indicators of GBZ 159 are not suitable for the current actual work of occupational health, and need to be revised and improved urgently. The revised GBZ 159 should comply with the current situation of China's industrial development and the development of occupational health testing equipment in the new era, and improve the relevant technical requirements of sampling quality control.

Volatile organic compounds in the habitat of the escamolera ant (Liometopum apiculatum Mayr) in Zacatecas, Mexico

Volatile organic compounds (VOCs) take part in the biological processes of insects; however, these compounds have not been determined for genus Liometopum. The objective of this study was to identify the variability of the VOCs found in the Liometopum apiculatum habitat during the exploitation season. During the 2017 preseason and season, 35 air samples were collected from the nests of five L. apiculatum colonies established in crassicaule scrub vegetation; additionally, another 35 samples were taken from their foraging sites. Using a gas chromatograph with an electronic nose detector, the VOCs were identified with the Kovats index. In addition, a principal component analysis (PCA) was carried out to evaluate the intensity variability per season. Fourty-eight VOCs were identified in the L. apiculatum habitat. The most significant VOCs included: saturated hydrocarbon (17%), aldehydes (17%), alcohols (15%), and esters (10%). PCA accounted for 79.5% (PC1=53.8 and PC2=25.7) of the intensity variability of the VOCs in the habitat between seasons. The escamol season was characterized by the 3-methyl-3-sulfonyl butan-1-ol, 2-Methylbutanoic acid, and trimethylamine. This profile of the VOCs in the L. apiculatum habitat is a pioneer work and has future implications for the conservation and sustainable exploitation of the escamolera ant.

Research on quantitative evaluation of revise requirements of Specifications of Air Sampling for Hazardous Substances Monitoring in the Workplace (GBZ 159-2004)

Objective: To conduct quantitative evaluation on the revise requirements of Specifications of Air Sampling for Hazardous Substances Monitoring in the Workplace (GBZ 159-2004) , clarify the problems and suggestions during its implementation for improvement, and provide a basis for the revision of the standard. Methods: From April to September 2021, stratified convenient sampling method was adopted and semi-open questionnaire was used to investigate the occupational health personnel in CDC, occupational prevention and control institutes, employers, third-party technical service institutions and universitie. The entropy weight of each index and the score based on entropy weight of GBZ 159 were calculated. Spearman rank correlation analysis was used to describe the correlation between the two indexes and radar chart was drawn for comprehensive evaluation. Results: A total of 151 questionnaires were received from the respondents, of which 147 were valid, with an effective recovery rate of 97.35%, involving 29 provinces, autonomous regions and municipalities. The median G scores of the necessity and urgency of GBZ 159 revision based on entropy weight were 2.84 and 3.17, respectively, and the difference was statistically significant (M=-25.50, P<0.001) . The trend of the score G of necessity and urgency based on entropy weight was basically the same for all secondary items (r(s)=0.9998, P<0.001) , and the score G of urgency based on entropy weight was higher than that of necessity. The highest score G of necessity and urgency based on entropy weight was "3.13 long time sampling", which were 7.56 and 8.23 respectively. This was followed by "3.12 short time sampling", which were 7.19 and 7.13 respectively. Conclusion: GBZ 159 has encountered some new problems and challenges in the implementation process, and some of its technical indicators have been out of line with the actual practice of occupational health at present. These are the two items that urgently needs to be revised and improved, such as "3.13 long time sampling" and "3.12 short time sampling" and other items need to be revised and improved.

Characterization of PAHs bound to ambient ultrafine particles around runways at an international airport

The impact of airport activities on air quality, is not sufficiently documented. In order to better understand the magnitude and properly assess the sources of emissions in the sector, it is necessary to establish databases with real data on those pollutants that could have the greatest impact on both health and the environment.Particulate matter (PM), especially ultrafine particles, are a research priority, not only because of its physical properties, but also because of its ability to bind highly toxic compounds such as polycyclic aromatic hydrocarbons (PAHs).Samples of PM were collected in the ambient air around the runways at Barajas International Airport (Madrid, Spain) during October, November and December 2021. Samples were gathered using three different sampling systems and analysed to determine the concentration of PAHs bound to PM. A high-volume air sampler, a Berner low-pressure impactor, and an automated off-line sampler developed in-house were used. The agreement between the samplers was statistically verified from the PM and PAH results.The highest concentration of PM measured was 31 μg m−3, while the concentration of total PAH was 3 ng m−3, both comparable to those recorded in a semi-urban area of Madrid.The PAHs showed a similar profile to the particle size distribution, with a maximum in the 0.27–0.54 μm size range, being preferentially found in the submicron size fractions, with more than 84% and around 15–20% associated to UFPs.It was found that the ratio [PAHs(m)/PM(m)] was around 10–4 in the warmer period (October), whereas it more than doubled in the colder months (November–December). It is significant the shift in the relative distribution of compounds within these two periods, with a notable increase in the 5 and 6 ring proportions in the colder period. This increase was probably due to the additional contribution of other external sources, possibly thermal and related to combustion processes, as supported by the PAH diagnostic ratios.

Air Change Rate and SARS-CoV-2 Exposure in Hospitals and Residences: A Meta-Analysis.

As SARS-CoV-2 swept across the globe, increased ventilation and implementation of air cleaning were emphasized by the US CDC and WHO as important strategies to reduce the risk of inhalation exposure to the virus. To assess whether higher ventilation and air cleaning rates lead to lower exposure risk to SARS-CoV-2, 1274 manuscripts published between April 2020 and September 2022 were screened using key words "airborne SARS-CoV-2 or "SARS-CoV-2 aerosol". Ninety-three studies involved air sampling at locations with known sources (hospitals and residences) were selected and associated data were compiled. Two metrics were used to assess exposure risk: SARS-CoV-2 concentration and SARS-CoV-2 detection rate in air samples. Locations were categorized by type (hospital or residence) and proximity to the sampling location housing the isolated/quarantined patient (primary or secondary). The results showed that hospital wards had lower airborne virus concentrations than residential isolation rooms. A negative correlation was found between airborne virus concentrations in primary-occupancy areas and air changes per hour (ACH). In hospital settings, sample positivity rates were significantly reduced in secondary-occupancy areas compared to primary-occupancy areas, but they were similar across sampling locations in residential settings. ACH and sample positivity rates were negatively correlated, though the effect was diminished when ACH values exceeded 8. While limitations associated with diverse sampling protocols exist, data considered by this meta-analysis support the notion that higher ACH may reduce exposure risks to the virus in ambient air.

Altitude-associated trends in bacterial communities in ultrahigh-altitude residences

BackgroundIndoor bacterial communities may change with altitude because their major contributors, outdoor bacterial communities, vary with altitude. People’s health effects from bacteria inhalation exposure can also vary with altitude because human respiratory physiology changes with oxygen content in air. Accordingly, adjusting indoor bacterial communities may help to acclimate newcomers from low-altitude environments to ultrahigh-altitude environments. To lay the groundwork for further research, we aimed to first elucidate the bacterial communities in ultrahigh-altitude residences and the effects of altitude on these communities. We collected 187 environmental samples from residential communities at ultrahigh altitudes of 3811–4651 m in Ngari, China and sequenced bacterial 16S rRNA genes. ResultsOn one hand, when abundant genera in ultrahigh-altitude residences and those reported by previous studies on low-altitude residences were compared, nine genera were shared, whereas other five genera were abundant only at ultrahigh altitudes. On the other hand, when the bacterial communities of residences at different ultrahigh altitudes were further compared, the bacterial composition in indoor surface samples varied significantly with altitude. The relative abundance of five bacterial genera in indoor air samples and 10 genera and three phyla in indoor surface samples varied monotonically with altitude. ConclusionsAltitude may be a long-neglected factor that shapes residential bacterial communities and thus warrants attention.

Spatial distribution, environmental behavior, and health risk assessment of PAHs in soils at prototype coking plants in Shanxi, China: Stable carbon isotope and molecular composition analyses

To investigate the environmental behavior of and carcinogenic risk posed by 16 priority-controlled polycyclic aromatic hydrocarbons (PAHs), soil samples and air samples from the coke oven top were collected in two prototype coking plants (named PF and JD). The PF soils contained more PAHs than the JD soils because the PF plant employed the side-charging technique and had a lower coke oven height. The soils from both plants contained enough PAHs to pose a carcinogenic risk, and this risk was higher in the PF plant. Data were collected on the source characteristic spectrum of stable carbon isotopic composition (δ13C) of PAHs emitted from the coke oven top (δ13C values of −36.02‰ to −32.05‰ for gaseous PAHs and −34.09‰ to −25.28‰ for particulate PAHs), and these data fill a research gap and may be referenced for isotopic-technology-based source apportionment. Diagnostic ratios and isotopic technology revealed that the coking plant soils were mainly influenced by the coking process, followed by vehicle exhaust; the soils near the boundary of each plant were slightly affected by C3 plant burning. For most PAHs [excluding fluoranthene, benzo(k)fluoranthene, indeno(1,2,3-c,d)pyrene, and dibenzo(a,h)anthracene], the dominant migration process was the net volatilization of PAHs from soil to air. In the PF plant, 13C was depleted in gaseous PAHs during volatilization.

Online observation of light non-methane hydrocarbons (C2–C5) over the central Himalayas: Influence of the Indo-Gangetic Plain region

Studies pertaining to non-methane hydrocarbons (NMHCs) are very limited in South Asia, particularly at high-mountain sites. Therefore, online in-situ observations of light NMHCs (C2–C5) were conducted in the Central Himalayas (Nainital, 1958 m) from January 2017 to December 2020. Additionally, air samples were collected from an Indo-Gangetic Plain (IGP) site (Haldwani, 554 m), located about 18 km and the nearest source regions for the mountain site. The diurnal variations show daytime higher values at the mountain site, which is typical for a pristine site. Correlation analysis and percentage contributions confirm the major roles of biomass burning at the mountain site and Liquefied Petroleum Gas (LPG) emission, automobile and domestic combustion at the IGP site. Nevertheless, the anthropogenic influences also reaches the Himalayan site, mainly in spring, which is confirmed by the concentrated weighted trajectory (CWT) analysis. Such influences are limited to the IGP site in winter, primarily due to the shallower boundary layer. The estimated photochemical age varies from 9 days in winter to 16 days in summer-monsoon. It is shown that the hydroxyl radical reactivity, ozone formation potential (OFP) and secondary organic aerosol formation potential (SOAFP) are 4–6 times higher at the IGP site compared to the Himalayan site. Propylene, ethylene and n-butane are major contributor in these at both sites. Ethane is found to be most abundant (40%) at the Himalayan site, while propane (27%) at the IGP site. An assessment of percentage contribution of different NMHCs in emission inventories for the Himalayan region is suggested.

Characterization of microplastics in outdoor and indoor air in Ranchi, Jharkhand, India: First insights from the region

The study focused on detecting and characterizing microplastics in outdoor and indoor air in Ranchi, Jharkhand, India during post-monsoon (2022) and winter (2023). Stereo microscopic analysis showed that plastic fibres had a dominant presence, fragments were less abundant, whereas fewer films could be detected in indoor and outdoor air. The atmospheric deposition of microplastics outdoors observed 465 ± 27 particles/m2/day in PM10 and 12104 ± 665 and 13833 ± 1152 particles/m2/day in PM2.5 in quartz and PTFE, respectively during the post-monsoon months. During winter, microplastic deposition rates in PM10 samples were found to be 689 ± 52 particles/m2/day and 19789 ± 2957 and 30087 ± 13402 in quartz and PTFE particles/m2/day respectively in PM2.5. The mean deposition rate in indoor environment during post-monsoon was 8.3 × 104 and 1.03 × 105 particles/m2/day in winter. During the post-monsoon period in PM10, there were fibres from 7.7 to 40 μm and fragments from 2.3 μm to 8.6 μm. Indoor atmospheric microplastics, fibres ranged from 1.2 to 47 μm and fragments from 0.9 to 16 μm present respectively during the post-monsoon season. Fibres and fragment sizes witnessed during winter were 3.6–6.9 μm and 2.3–34 μm, respectively. Indoor air films measured in the range of 4.1–9.6 μm. Fourier transform infrared analysis showed that outdoor air contained polyethylene, polypropylene, Polystyrene, whereas indoor air had polyvinyl chloride. Polyethylene mainly was present in outdoor air, with lesser polypropylene and polystyrene than indoors, where polyvinyl chloride and polyethylene were in dominant proportions. Elemental mapping of outdoor and indoor air samples showed the presence of elements on the microplastics. The HYSPLIT models suggest that the particles predominantly were coming from North-West during the post-monsoon season. Principal component analysis indicated wind speed and direction influencing the abundance of microplastics. Microplastics concentration showed strong seasonal influence and potential to act as reservoir of contaminants.

The distribution characteristics of aerosol bacteria in different types of sheepfolds.

With the development of modern sheep raising technology, the increasing density of animals in sheep house leads to the accumulation of microbial aerosols in sheep house. It is an important prerequisite to grasp the characteristics of bacteria in aerosols in sheep house to solve the problems of air pollution and disease prevention and control in sheep house. In this study, the microorganisms present in the air of sheep houses were investigated to gain insights into the structure of bacterial communities and the prevalence of pathogenic bacteria. Samples from six sheep pens in each of three sheep farms, totaling 18, were collected in August 2022 from Ningxia province, China. A high-volume air sampler was utilized for aerosol collection within the sheep housing followed by DNA extraction for 16S rRNA sequencing. Employing high-throughput 16S rRNA sequencing technology, we conducted an in-depth analysis of microbial populations in various sheep pen air samples, enabling us to assess the community composition and diversity. The results revealed a total of 11,207 operational taxonomic units (OTUs) within the bacterial population across the air samples, encompassing 152 phyla, 298 classes, 517 orders, 853 families, 910 genera, and 482 species. Alpha diversity and beta diversity analysis indicated that differences in species diversity, evenness and coverage between different samples. At the bacterial phylum level, the dominant bacterial groups are Firmicutes, Proteobacteria, and Actinobacteria, among which Firmicutes (97.90-98.43%) is the highest. At the bacterial genus level, bacillus, Bacteroides, Fusobacterium, etc. had higher abundance, with Bacillus (85.47-89.87%) being the highest. Through an in-depth analysis of microbial diversity and a meticulous examination of pathogenic bacteria with high abundance in diverse sheep house air samples, the study provided valuable insights into the microbial diversity, abundance, and distinctive features of prevalent pathogenic bacteria in sheep house air. These findings serve as a foundation for guiding effective disease prevention and control strategies within sheep farming environments.