Adjustment For Height Research Articles

Dietary patterns in relation to incidence rate of pancreatic cancer - the Norwegian women and cancer cohort study.

Despite development in cancer treatment and prevention options during the past few years, cancer of the pancreas remains a diagnosis associated with poor prognosis and limited options for prevention. Diet has proven to be an important risk factor for development of many types of cancer, particularly for cancers of the digestive system. Still, evidence regarding its relation to pancreatic cancer remains ambiguous. To investigate the relationship between diet and pancreatic cancer, an analysis of dietary patterns in participants from the Norwegian Women and Cancer Study (n = 89,156; 305 pancreatic cancer cases) was performed. Cox regression analysis was used for studying possible associations between dietary patterns, derived from principal component analysis, and pancreatic cancer incidence. The four most prominent dietary patterns were identified and described: European pattern, animal food consumers' dietary pattern, traditional Norwegian pattern, and alcohol-abstaining dietary pattern. In analysis without adjustment for confounders, being in the highest tertile of the abstaining dietary pattern was associated with lower risk of pancreatic cancer in comparison to the lowest tertile (hazard ratios [HR]: 0.66, 95% confidence interval [CI]: 0.49-0.89). After additional adjustment for height and smoking status, no dietary pattern was associated with increased pancreatic cancer risk, nor was there any difference in effect estimates between strata of smokers and non-smokers. The results of our current analysis do not support the role of major dietary patterns in the development of pancreatic cancer.

Prevalence of De-Quervain’s Tenosynovitis in Tailors of Multan (Punjab)

Purpose: De Quervain's Tenosynovitis is inflammation of extensor pollicis brevis and abductor pollicis longus tendons that run from the side of the wrist to the base of the thumb. To see the frequency of De Quervain’s Tenosynovitis and work related risk factors in tailors of Multan, Pakistan
 Methodology: It was a cross-sectional study. Sample size of the research was 246. Study was conducted at the city of Pakistan, Multan. Inclusion criteria of the study were tailors of age between twenty to fifty years having experience of more than 3 years. Data was collected to the selected population, through convenient sampling technique. Duration of the study was 8 months. Outcome measures of the study were Finkelstein test, Visual analogue scale and a structured questionnaire. The collected data was analyzed by using SPSS version 25.
 Findings: Out of 246 participants, 72.3% were males and 27.6% were females. Prevalence of De Quervain's Tenosynovitis was found to be 64% in tailors of Multan through Finkelstein test. 25.6% of the participants had moderate, while 22.3% had extreme discomfort in lower back. 35.3% reported to have mild discomfort in arms. 52.4% had mild to moderate discomfort in wrist or hand. 19.91% reported not to have an enough space for work. 44.30% did not have adjustable chairs. 69.91% reported to have no back rest while sewing, 63% reported unavailability of foot rest and 64.63% had no arm rest while sewing.
 Recommendations: De Quervain’s Tenosynovitis is prevalent in tailors of Multan, Pakistan. Work-related discomfort was found in various regions of body including eyes, neck, shoulders, arms, wrist and hand. Chairs with no adjustable height, unavailability of arm and foot rest and no back support were associated work related risk factors in tailors.

Design and Experiment of Header Height Adaptive Adjustment System for Maize (Zea mays L.) Harvester

In Northeast China, the maize (Zea mays L.) harvester header height is still manually controlled, and the control precision is poor, which limits the quality of maize harvesting and is unfavorable to the long-term development of agricultural harvesting. This work created an adaptive adjustment method for header height to address this issue. A maize harvester header, an STM32 control unit and key module, a hydraulic adjustment mechanism, and a pressure-wheel profiling device comprise the majority of the system. In this scenario, the proposed pressure-wheel profiling device is mounted to the ridge’s surface and walks along it, delivering real-time data on terrain changes. The terrain change signals are received and processed in real time by the STM32 control unit, which subsequently operates the hydraulic adjustment mechanism to alter the header height. The structural dimensions and operational parameters of the essential components for pressure-wheel profiling device were determined using force analysis. A kinematic analysis of the hydraulic adjusting mechanism was performed, and the expression of the relationship between the displacement of hydraulic cylinder and the header height was obtained. The pressure-wheel profiling device was calibrated, the adaptive adjustment parameter model was constructed, and the PID control technique was employed to achieve automatic header height adjustment. This study analyzed the effects of harvester different forward speeds (1.25, 1.45, 1.65, 1.85, and 2.05 m/s) and different operating modes (open and unopened system) on the test indexes (Errors in the automatic adjustment of header height, Cob loss rate, Coefficient of variation in stubble height). The results revealed that, with the adaptive adjustment system mode on, the average difference between the measured actual header height and the predetermined height was 9.96 mm, the average coefficient of variation in stubble height was lowered by 34.44%, and the average cob loss rate was decreased by 7.98%, both of which may accommodate the needs of maize harvester header height adjustment. This study serves as a reference for the automated design of a maize harvester for monopoly crops.

Research on body height adjustment of electronically controlled air suspension based on single mass vehicle model

Research on body height adjustment of electronically controlled air suspension based on single mass vehicle model

A Dual-Inlet Pump with a Simple Valves System.

To ameliorate the deficient output flow performance of the piezoelectric pumps with cantilever valves, a dual-inlet pump with a simple valves system is proposed. On the basis of explaining the structure design of the prototype, the working principle of the prototype is explained, and the output flow is theoretically analyzed. Then, the manufacturing process of the prototype is introduced. The general operating frequency of the pump was obtained by combining the finite element analysis of the piezoelectric actuator under dry and wet modes with the mechanical vibration test, and a series of measured flow rates were compared and improved through valve stiffness optimization and pump chamber height adjustment in the subsequent control experiment. The proposed piezoelectric pump achieves a maximum flow rate of 33.18 mL/min at a 180 Vp-p voltage with the driving frequency of 100 Hz, which may bring new inspiration for the application of small intelligent pumps in the field of microfluidics.

Testing a New Concept of a Self-Adaptive Transtibial Prosthesis

Abstract A considerable number of prosthetic medical devices for amputees are known. These devices do not fully replace the biological functions of the lost limb following lower amputations. In the case of pediatric patients, the problem is even more serious, as they are growing, it is necessary to regularly adjust the height of the prosthesis. Otherwise, a discrepancy occurs in the length of the limbs, that changes the center of gravity of the body of the prosthesis wearer, leading to related and sometimes serious pathologies. Currently, there are only classic, passive modules for adjusting the height of the prosthesis, but which are adjusted manually with low precision and extensive work. The present work contains the method of digital control of the prosthesis that can ensure the motorized height adjustment of the patient’s lower limb. The results obtained from the experimental tests are presented, which indicate that this type of concept is feasible from a biomechanical point of view and can be a technical advance in the market of prosthetic medical devices addressed to the pediatric area.

Ice sheet height retrievals from Spire grazing angle GNSS-R

Global Navigation Satellite System-Reflectometry (GNSS-R) leverages signals of opportunity for remote sensing, such as for mapping sea surface topography. This study investigates Grazing angle observations of GNSS-R (GG-R) to systematically retrieve ice sheet surface height in Greenland and Antarctica using Spire Global, Inc. CubeSats. Over a nine-month period, approximately 7800 coherent segments have been processed over the polar regions to compute relative height of the ice sheet above the WGS84 reference ellipsoid under grazing angle geometries. The retrieval of surface height is based on using ionosphere-free phase measurements from both the direct and reflected signals. Digital Elevation Models (DEMs) were used for the relative height adjustment and the validation of the GG-R retrievals, which presented a root mean square error (RMSE) of ∼1.7 m for both regions. Furthermore, the collocated GG-R profiles manifest good agreement among each other and reveal systematic behavior in the height residuals that might be caused by the DEMs. The results presented in this study demonstrate the potential of dual-frequency GG-R for measuring ice sheet surface heights.

草地作业喷播机喷播落种均匀性分析

In the process of revegetation of degraded grassland by pneumatic seed sprayer, the working parameters of the sprayer, such as the position of the sprayer and the air velocity of the inlet of the sprayer, have an impact on the uniformity of spraying. In this paper, 4BQD-40C pneumatic sprayer is taken as the research object. The influence of the compensation mechanism on the airflow velocity at the inlet of the barrel nozzle and the spraying quality is analyzed. The conclusions show that: (1) The planting trajectory of the sprayer inlet compensation mechanism is analyzed, and the planting trajectory equation is obtained, which lays a foundation for subsequent research. (2) The influence law of the opening height on the inlet airflow velocity of the nozzle is obtained, and the drop trajectory is adjusted by adjusting the inlet airflow velocity of the nozzle, and the area of the missed seeding area is reduced. (3) The time points of opening height adjustment and reset of the compensation mechanism in one cycle were obtained. At the same time, there is a lag time t1 due to changing the seed drop trajectory by adjusting the nozzle inlet airflow velocity. Due to this lag time, the compensation mechanism can be used to change the seed drop trajectory when the swing frequency is less than 7.3 min-1 to achieve optimization of the reseeded and missed seeding areas.

Research on a short-sleeper type ballastless-track that can adapt to large foundation deformation

Settlement and arch deformation on the ballastless-track foundation during rail transit operations pose challenges to the existing track structure, which can only accommodate up to 30 mm of foundation deformation through the replacement of fastener adjusting pads. These limitations result in prolonged remediation cycles, increased expenses, and disruptions to train runs. To address these issues, a height-adjustable short-sleeper ballastless-track structure is proposed. Using the vehicle-track coupled dynamics theory and FEM, this study investigates the geometric matching characteristics, modal behavior of the track structure and their impact on the dynamics performance of the vehicle and track system when the HSBS structure is adjusted to 200 mm. Findings demonstrate that the ballastless-track can easily adjust the height by modifying the thickness of pads or replacing the short sleepers, enabling effective adaptation to substantial track foundation deformation with an adjustment capacity exceeding 200 mm. Importantly, the vibration mode and natural frequency of the short sleeper remain unchanged before and after lifting the track structure. Under the condition of unchanged support stiffness, the stability of the track structure, as well as the safety and smooth performance of the vehicle, are maintained at the same level as before the height adjustment.

Research on Height Adjustment Characteristics of Heavy Vehicle Active Air Suspension Based on Fuzzy Control

The suspension system’s performance has a direct impact on the ride comfort, handling stability, and driving safety of heavy vehicles. The active air suspension of heavy vehicles can adjust the stiffness, damping parameters, and body height in real-time based on different road conditions. This adjustment ensures that the entire vehicle experiences a smooth ride while also making vehicle loading and unloading more labor efficient. Additionally, the active air suspension system enables the vehicle to achieve automation and intelligence. This study focused on a particular 6 × 4 heavy vehicle and designed an active air suspension system that aligns with the vehicle parameters of the heavy truck. Through the use of a fuzzy PID active control strategy, this study investigated and analyzed the height adjustment of the air spring. The results indicate that at a vehicle speed of 60 km/h on a class A road surface, the vehicle body’s vertical acceleration was reduced by 22.1%, and the dynamic travel of the suspension was reduced by 20.1%. This indicates that the fuzzy PID active air suspension system effectively reduces the vehicle’s vibrations and improves ride comfort.

Impact of balance on the energetic cost of walking and gait speed.

Examine the relationship between balance test performance and the energetic cost of walking (ECW) and gait speed. Cross-sectional and longitudinal analyses of data from the Baltimore Longitudinal Study of Aging. Men (48%) and women aged 60-96 years enrolled in the BLSA between 2007 and 2020 (n = 1132). Balance was assessed using narrow walk (NW) and progressive standing balance tests (SB). ECW measured during 2.5-min usual paced walk while participants wore a portable indirect calorimeter. Gait speed assessed over 6-m. Each test parameterized using validated methods. Statistical analysis to compare balance measures to ECW, and gait speed used generalized logistic regression models and adjustments for age, sex, race, height, weight, and comorbidities. Cross-sectionally, mean ECW was higher and gait speed slower in persons who failed the NW than those who passed (0.189 vs. 0.164 mL/kg/m, p < 0.0001 and 0.96 vs. 1.15 m/s, p < 0.0001, respectively). Mean ECW was increasingly higher and gait speed slower over three progressively challenging SB tests (0.207 vs. 0.171 vs. 0.164 mL/kg/m, p < 0.0001 and 0.95 vs. 1.05 vs. 1.15 m/s, p < 0.0001). Over an average 2.4 years, those who declined in SB and NW had a higher ECW and slower gait speed than persons who maintained performance (SB: 0.18 vs. 0.160 mL/kg/m, p = 0.0003, and 1.00 vs. 1.13 m/s, p = <0.001; NW: 0.175 vs. 0.160 mL/kg/m, p = 0.002, and 1.04 vs. 1.14 m/s, p = 0.001). Persons who improved had lower ECW and faster gait speed than those who failed at both visits (SB: 0.169 vs. 0.240 mL/kg/m, p = 0.0002, and 0.99 vs. 0.94 m/s, p = 0.67, NW: 0.163 vs. 0.195 mL/kg/m, p = 0.0005, and 1.10 vs. 0.92 m/s, p < 0.001). Instability contributes to higher ECW and slower gait speed which suggests that rehabilitation efforts to improve balance may help maintain function further into older adulthood and delay mobility limitation.

Estimating Total Energy Expenditure to Determine Energy Requirements in Free-Living Children With Stage 3 Chronic Kidney Disease: Can a Structured Approach Help Improve Clinical Care?

Malnutrition and obesity are complex burdensome challenges in pediatric chronic kidney disease (CKD) management that can adversely affect growth, disease progression, wellbeing, and response to treatment. Total energy expenditure (TEE) and energy requirements in children are essential for growth outcomes but are poorly defined, leaving clinical practice varied and insecure. The aims of this study were to explore a practical approach to guide prescribed nutritional interventions, using measurements of TEE, physical activity energy expenditure (PAEE), and their relationship to kidney function. In a cross-sectional prospective age-matched and sex-matched controlled study, 18 children with CKD (6-17years, mean stage 3) and 20 healthy, age-matched, and gender-matched controls were studied. TEE and PAEE were measured using basal metabolic rate (BMR), activity diaries and doubly labeled water (healthy subjects). Results were related to estimated glomerular filtration rate (eGFR). The main outcome measure was TEE measured by different methods (factorial, doubly labeled water, and a novel device). Total energy expenditure and PAEE with or without adjustments for age, gender, weight, and height did not differ between the groups and was not related to eGFR. TEE ranged from 1927±91 to 2330±73kcal/d; 95±5 to 109±5% estimated average requirement (EAR), physical activity level (PAL) 1.52±0.01 to 1.71±0.17, and PAEE 24 to 34% EAR. Comparisons between DLW and alternative methods in healthy children did not differ significantly, except for 2 (factorial methods and a fixed PAL; and the novel device). In clinical practice, structured approaches using supportive evidence (weight, height, BMI sds), predictive BMR or TEE values and simple questions on activity, are sufficient for most children with CKD as a starting energy prescription.

A Supervisory Control System for Automation of Horizontal Form-Fill-Seal Packaging Plant Based on Modified Atmosphere Technology

Abstract The packaging industry is one of the most important parts of agricultural products processing. A popular method of increasing the shelf life of agricultural products is modified atmosphere packaging (MAP). The main objective of this paper was to increase the adaptability and flexibility of the machines for packaging of different vegetables including lettuces, broccolis, cabbages, cauliflowers, etc. To achieve this goal, a supervisory control and data acquisition (SCADA)-based system was designed and developed for controlling and monitoring of MAP process of fresh vegetables. The system was divided into three physical layers: field devices, remote terminal unit (RTU) and master terminal unit (MTU). For packaging width adjuster system, the R2, maximum error (ME), mean absolute error (MAE) and root mean square error (RMSE) were obtained as 0.999, 8 mm, 2.96 mm and 3.44 mm, respectively. For packaging height adjuster system, the R2, ME, MAE and RMSE were obtained as 0.994, 10 mm, 3.53 mm and 4.57 mm, respectively. The SCADA system can be able to accurately adjust the speed of the conveyor and the temperature of the sealing jaws, based on the desired values. For gas injection unit, the value of 1.66 L/min, 0.557 L/min and 0.667 L/min were recorded for ME, MAE and RMSE, respectively. Four types of trends including temperature, speed, flow and digital parameter trends were designed. In addition to displaying screen alarms, the occurred alarms are stored, automatically as a text file for troubleshooting. Finally, the results showed that the designed system can be reliably used for MAP of various varieties of fresh vegetables.

Associations between birth weight and lung function in a Japanese adult population: The tohoku medical megabank community-based cohort study

BackgroundBirth weight, as a measure of intrauterine growth, is commonly used in epidemiological studies and is reported to be associated with adult lung function. However, findings regarding this association in previous studies have been inconsistent. Furthermore, no studies have reported associations stratified by age or smoking status, or adjusted for eosinophil count or other parameters related to type 2 airway inflammation. MethodsThis cross-sectional study included 2632 men and 7237 women aged ≥20 years living in Miyagi Prefecture, Japan. Lung function was assessed based on spirometry. Birth weight data were obtained through a questionnaire survey. Analysis of covariance was used to evaluate the associations between birth weight and lung function, adjusting for potential confounders. Stratified analyses by age and smoking status were also conducted, together with a sub-analysis for low birth-weight participants. ResultsBirth weight was positively associated with forced expiratory volume in 1 s (FEV1) for both sexes and with vital capacity in women, after adjusting for height, age, smoking status, and parameters related to type 2 airway inflammation. The stratified analysis for smoking status revealed associations in never-smokers and ex-smokers. When stratified by age, the associations were confirmed in middle-aged participants. The effect of smoking status on the FEV1 of low birth-weight participants was not significant. ConclusionsOur analysis of a large, Japanese adult population showed that birth weight was independently and positively associated with adult lung function, even after adjustment for age, height, smoking status, and parameters related to type 2 airway inflammation.

Association between Arterial Hypertension and Laboratory Markers, Body Composition, Obstructive Sleep Apnea and Autonomic Parameters in Obese Patients.

Systemic arterial hypertension (SAH) is a multifactorial disease, highly prevalent and associated with health risks. The purpose of this study was to investigate the association between SAH and laboratory, anthropometric, heart rate variability (HRV), and obstructive sleep apnea markers and, secondarily, to analyze the sensitivity and specificity of the variables that are independent factors in the association. Cross-sectional study with 95 obese patients treated at an obesity referral clinic in Salvador, BA, Brazil. SAH data were obtained from electronic medical records. The sample was stratified in the Normotensive Group (NG) and the Hypertensive Group (HG), and laboratory markers, body composition, polysomnography, and HRV were measured to evaluate the association of SAH with the predictor variables. For the analysis, p<0.05 was adopted. The average age of the NG was 36.3 ± 10.1 and HG 40.4 ± 10.6 years; 73.7% were women in the NG and 57.9% in HG; 82.4% in HG had insulin resistance. In the multivarious logistics regression model with adjustments in age, sex, height, and oxyhemoglobin saturation, SAH was inversely associated with fasting plasma glucose mg/dL (odds ratio [OR] = 0.96; 95% confidence interval [CI] = 0.92-0.99) and visceral fat area (VFA) cm2(OR = 0.98; 95% CI = 0.97-0.99). The area under the VFA curve was 0.728; CI 95% (0.620-0.836); fasting plasma glucose 0.693;CI 95% (0.582-0.804). Lower VFA and fasting plasma glucose concentrations were inversely associated with SAH. In addition, fasting plasma glucose and VFA showed a high sensitivity for SAH screening.

Modeling and Experimental Validation of the Performance of Electromechanical Height Adjustment Vehicle Suspension with Eccentric Mounted Screw System

This paper describes the modeling and experimental validation of the performance of two height adjustment suspensions with concentrically and eccentrically mounted screws. In the former solution, an anti-rotation system is required for the generation of reaction torque on the power screw–nut mechanism. The anti-rotation represents the main drawback of such mechanisms. In contrast, the eccentric solution attempts to solve this problem by placing the screw–nut mechanism eccentrically with respect to the shock absorber tube axis. In this paper, the working principle of the eccentric solution is explained. Its performance is compared to the concentric counterpart through simulations and experiments. Although the efficiencies of eccentric and concentric systems are very similar at the power screw, overall efficiencies differ substantially. During lifting, average efficiencies are around 3.4% and 6.5% for concentric and eccentric systems, respectively. When lowering, these values are 6.2% and 26%. The higher overall efficiency of the eccentric screw system is attributed to the anti-rotation system and the balancing of the bending moment due to the offset application of the load. To yield a complete perspective on the eccentric mounted screw solution, four prototypes are installed and tested on a demo vehicle.

321-OR: Differential Associations of Obesity and Metabolic Syndrome with Polyneuropathy in Early Type 2 Diabetes and Normal Glucose Tolerance

There is increasing evidence for a role of the metabolic syndrome (MetS) during development of distal sensorimotor polyneuropathy (DSPN). We hypothesized that MetS components are differentially associated with measures of DSPN in individuals with normal glucose tolerance (NGT) and early type 2 diabetes (T2D). Electrophysiological and quantitative sensory testing was performed in 180 participants with NGT and 355 with recent-onset T2D (known diabetes duration &amp;lt;1 year) matched for age from the German Diabetes Study (NGT/T2D [mean±SD]: age: 43.9±14.0/45.1±7.7 years; sex: 61/65% male; BMI: 26.8±5.0/32.3±6.5 kg/m²; HbA1c: 5.2±0.3/6.5±1.0%). Intraepidermal nerve fiber density (IENFD) was assessed in 218 individuals (NGT/T2D: n=117/101). Subsets of participants were followed for 5 years (NGT/T2D: n=48/53). MetS was defined according to International Diabetes Federation (2006) and DSPN according to Toronto consensus criteria (2011). After adjustment for age, sex, height, smoking and HbA1c, a lower IENFD was associated with higher weight (β=-0.306), number of MetS components (NMetSC; β=-0.222) and presence of central obesity (β=-0.292), while higher malleolar vibration perception threshold was associated with weight (β=0.219) in NGT (P&amp;lt;0.05), but not in T2D. Median motor nerve conduction velocity and sural sensory nerve action potential were inversely associated with weight (β=-0.182/-0.286), NMetSC (β=-0.127/-0.128), presence of central obesity (β=-0.163/-0.165), and MetS (β=-0.169/-0.203) in T2D (P&amp;lt;0.05). Higher weight predicted the presence of DSPN at 5 years (β=0.652, P=0.001) in NGT, while increasing NMetSC and MetS prevalence predicted a decline in IENFD over 5 years (β=-0.533/-0.388, P=0.001/0.013) in T2D. This suggests that obesity indices can predict DSPN over 5 years in NGT, while MetS and its components are differentially associated with measures of DSPN in early, well-controlled type 2 diabetes compared with NGT. Disclosure G.Sipola: None. A.Strom: None. M.Bombrich: None. R.Wagner: Advisory Panel; Daiichi Sankyo, Speaker's Bureau; Novo Nordisk, Sanofi. D.Ziegler: None. M.Roden: Advisory Panel; Eli Lilly and Company, Consultant; TARGET PharmaSolutions, Inc., Research Support; Boehringer-Ingelheim, Novo Nordisk, Novartis, Sanofi. G.J.Bönhof: None. Gds group: n/a. Funding German Federal Ministry of Health; Ministry of Innovation, Science, Research and Technology of the state North Rhine-Westphalia; German Federal Ministry of Education and Research

Myosteatosis and bone marrow adiposity are not associated among postmenopausal women with fragility fractures.

Although paravertebral intramuscular fatty infiltration (known as myosteatosis) following a vertebral fracture is well-known, scarce data are available regarding interactions between muscle, bone, and other fat depots. Based on a homogeneous cohort comprising postmenopausal women with or without a history of fragility fracture, we aimed to better depict the interrelationship between myosteatosis and bone marrow adiposity (BMA). 102 postmenopausal women were included, 56 of whom had a fragility fracture. Mean proton density fat fraction (PDFF) was measured in the psoas (PDFFPsoas) and paravertebral (PDFFParavertebral) muscles at the lumbar level, as well as in the lumbar spine and non-dominant hip using chemical shift encoding-based water-fat imaging. Visceral adipose tissue (VAT) and total body fat (TBF) were assessed using dual X-ray absorptiometry. Statistical models were adjusted for age, weight, height (all comparisons), and bone mineral density (when considering BMA). PDFF in the psoas and paravertebral muscles was higher in the fracture group compared to controls even after adjustment for age, weight, and height (PDFFPsoas = 17.1 ± 6.1% versus 13.5 ± 4.9%, p=0.004; PDFFParavertebral = 34.4 ± 13.6% versus 24.9 ± 8.8%, p=0.002). Higher PDFFParavertebral was associated with lower PDFF at the lumbar spine (β = -6.80 ± 2.85, p=0.022) among controls but not in the fracture group. In both groups, a significant relationship between higher PDFFPsoas and higher VAT was observed (β = 20.27 ± 9.62, p=0.040 in the fracture group, and β = 37.49 ± 8.65, p<0.001 in the control group). Although solely observed among controls, a similar relationship was observed between PDFFParavertebral and TBF (β = 6.57 ± 1.80, p<0.001). No significant association was observed between BMA and other fat depots. Myosteatosis is not associated with BMA among postmenopausal women with fragility fractures. Whereas myosteatosis was associated with other fat depots, BMA appears uniquely regulated.

Age-related trajectory of bone density in children with intestinal failure: A longitudinal retrospective cohort study.

Longitudinal changes in bone health in children with intestinal failure (IF) are unclear. We aimed to better understand the trajectory of bone mineral status over time in children with IF and identify clinical factors that influence the trajectory. Clinical records of patients attending the Intestinal Rehabilitation Center of Cincinnati Children's Hospital Medical Center between 2012 and 2021 were reviewed. Children diagnosed with IF before age 3 years with at least two lumbar spine dual-energy x-ray absorptiometry scans were included. We abstracted information on medical history, parenteral nutrition, bone density, and growth. We calculated bone density z scores with and without adjustment for height z scores. Thirty-four children with IF met inclusion criteria. Children were shorter than average with a mean height z score of -1.5 ± 1.3. The mean bone density z score was -1.5 ± 1.3 with 25 of the cohort having a z score < -2.0. After height adjustment, the mean bone density z score was -0.42 ± 1.4 with 11% below -2.0. Most dual-energy x-ray absorptiometry scans (60%) had a feeding tube artifact. Bone density z scores increased slightly with age and lower parenteral nutrition dependency and were higher in scans without an artifact. Etiologies of IF, line infections, prematurity, and vitamin D status were not associated with height-adjusted bone density z scores. Children with IF were shorter than expected for age. Deficits in bone mineral status were less common when adjusting for short stature. Etiologies of IF, prematurity, and vitamin D deficiency were not associated with bone density.

Experimental Study on Fire Suppression of the Outdoor Oil-Immersed Transformer by High-Pressure Water Mist System

Fire accidents due to oil-immersed transformers seriously threaten the safe operation of power systems. In this paper, the similarity principle was used to design a high-pressure water mist fire-extinguishing test platform for a small-scale transformer fire, and the design method achieved a good fire extinguishing effect. The results indicate that a deflagration phenomenon, lasting about 2–4 s, could be observed after activating the high-pressure water mist system; the flame temperature rose rapidly at first, then dropped sharply, and finally cooled to the indoor temperature. The nozzle’s flow rate in this system has a significant impact on the fire extinguishing time. Meanwhile, the adjustment of the upper nozzle height also influenced the fire suppression effectiveness of the system, where a height of 1800 mm achieved the best performance compared to the others. In addition, the ambient wind speed is a very unfavorable factor for transformer fire suppression, where the fire extinguishing efficiency decreases rapidly with the increase in wind speed. Therefore, under low wind speed conditions, the high-pressure water mist system has great advantages in the fire suppression of outdoor oil-immersed transformers, and the above research results can provide a reference for the optimization design of this system.