Adipic Acid Research Articles

Antimicrobial and antifouling hyaluronic acid-cobalt nanogel coatings built sonochemically on contact lenses

The wearing of contact lenses (CLs) may cause bacterial infections, leading in turn to more serious complications and ultimately vision impairment. In this scenario, the first step is the adhesion of tear proteins, which provide anchoring points for bacterial colonization. A possible solution is the functionalization with an antimicrobial coating, though the latter may also lead to sight obstruction and user discomfort. In this study, adipic acid dihydrazide-modified hyaluronic acid-cobalt (II) (HA-ADH-Co) nanogels (NGs) were synthesized and deposited onto commercial CLs in a single-step sonochemical process. The coating hindered up to 60 % the protein adsorption and endowed the CLs with strong antibacterial activity against major ocular pathogens like Staphylococcus aureus and Pseudomonas aeruginosa, reducing their concentration by around 3 logs. Cytotoxicity assessment with human corneal cells demonstrated viabilities above 95 %. The nanocomposite coating did not affect the optical power and the light transmission of the CLs and provided enhanced wettability, important for the wearer comfort.

A DFT Study of Adsorption of Keto Alcohol Oil on a WO3 (001) Surface Modified with Silver Clusters of Specific Size

AbstractThe essential raw materials, cyclohexanol and cyclohexanone, are derived from the selective catalytic oxidation of cyclohexane. Due to their closely matched boiling points, the efficient separation among the components remains a significant challenge in industrial catalysis. In this work, we employed DFT calculations to explore the adsorption behavior of CyH, CyOH, and Cy═O, on both clean and Ag‐modified ɦ‐WO3 (001) surfaces. The calculation results reveal that Ag4 exhibits the highest stability on the ɦ‐WO3 (001) surface. The organic species adsorbed onto the Agn‐WO3 surfaces through distinct host‐guest interactions: CyH via CH···Ag, CyOH, and Cy═O via HO···Ag and C═O···Ag, respectively. The optimal separation efficacy of CyOH and Cy═O on the Ag2‐WO3 surface results in CyOH as the preferred product, while on the Ag4‐WO3 surface, Cy═O serves as the ultimate outcome. Our theoretical calculations provided in this study offer a valuable theoretical foundation for the separation of the KA oil mixture.

Inhibitory Effects of Powdered Liquid Smoke from Mangrove (Avicennia marina) Twigs on Spoilage Bacteria

This study investigated the inhibitory effects of powdered liquid smoke derived from Avicennia marina (mangrove) twigs on spoilage bacteria. The research method used was experimental. Branches of mangrove (A. marina) were burned and distilled to produce liquid smoke. The powdered liquid smoke was subsequently tested for its antibacterial capabilities against foodborne pathogen bacteria. The damage to the bacterial formation was further illustrated using a Scanning electron micrograph. The components of liquid smoke were analysed using GC-MS. GC-MS test results on liquid smoke from mangrove twigs revealed several components including groups of acids such as butanoic acid, 1H-pyrrole-3-propanoic acid, 2-(4-methoxy-3-methylphenyl)-thiazolidine-4-carboxylic acid, hexanedioic acid, 2-bromo propionic acid, carbamic acid, oxalic acid, ritalinic acid and 7-dimethyl-6-octenyl acetate (acetic acid), as well as oxalic acid decyl propyl ester and 1,2-benzene dicarboxylic acid. The phenol group includes cyclohexanol, 2-cyclohexen-1-ol, 2-methyl-5-(1-methylethenyl)-, cis, 1,4-dihydroxy-p-menth-2-ene, phenol, 3-methyl, phenol, 2-methoxy-4-(1-propenyl)-, acetate, 1,2-diphenyl-2-ethanediol and 1,2-ethanediol. The ketone group includes beta-piperidino propiophenone, pyrrolidine-2-one, 5-[2-benzoylethyl]-,benzoyl amino-1-(4-methylphenyl)-3-piperidinyl propane, 3-nonen-5-one, 1-(1-butoxypropan-2-yloxy) propan-2-yl 2-methylbut-2-enoate, 6-octen-1-ol, 3,7-dimethyl, 4-(2,2,6-trimethyl cyclohexyl)-2-butanone and the carbonyl group includes N2-[(phenylmethoxy) carbonyl].

Nickel-copper alloying arrays realizing efficient co-electrosynthesis of adipic acid and hydrogen

Constructing electrocatalytic overall reaction technology to couple the electrosynthesis of adipic acid with energy-saving hydrogen production is of significant for sustainable energy systems. However, the development of highly-active bifunctional electrocatalysts remains a challenge. Herein, 3D hierarchical nickel-copper alloying arrays with dendritic morphology are manufactured by a simple electrodeposition process, standing for the excellent bifunctional electrocatalyst towards the co-production of adipic acid and H2 from cyclohexanone and water. The membrane-free flow electrolyzer of Cu0.81Ni0.19/NF shows the superior electrooxidation performance of ketone-alcohol (KA) oil with high faradaic efficiencies of over 90% for adipic acid and H2, robust stability over 200 h as well as a high yield of 0.6 mmol h−1 for adipic acid at 100 mA cm−2. In-situ spectroscopy indicates the Cu0.81Ni0.19 alloy contributes to forming more active NiOOH species to involve in the conversion of cyclohexanone to adipic acid, while the proposed reaction pathway undergoes the 2-hydroxycyclohexanone and 2,7-oxepanedione intermediates. Moreover, the theoretical calculations confirm that the optimal electronic interaction, boosted reaction kinetics as well as improved adsorption free energy of reaction intermediates, synergistically endows Cu0.81Ni0.19 alloy with superior bifunctional performance.

Antioxidant and Antibacterial Activities of Selected Medicinal Plants from Addis Ababa against MDR-Uropathogenic Bacteria.

This study determined the antioxidant and antibacterial activities of Thymus schimperi (Ts), Rhamnus prinoides (Rp), and Justicia schimperiana (Js) from Addis Ababa against MDR-Uropathogenic bacteria. Accordingly, Thymus schimperi had the highest total phenolic (TPC), flavonoid (TFC) and proanthocyanidin content. In Ts, the GC-MS analyses predicted 14 bioactive compounds. And among these, hexanedioic acid, bis(2-ethylhexyl) ester, thymol, and o-cymen-5-ol were the most predominant compounds, respectively. Six compounds were also predicted in Rp, where hexanedioic acid, bis(2-ethylhexyl) ester, β-D-glucopyranoside, methyl, and desulphosinigrin were the predominant, respectively. Whereas in the Js extract, five bioactive compounds were predicted, with hexanedioic acid, mono (2-ethylhexyl) ester, debrisoquine, and 8,11,14-heptadecatrienoate, methyl ester being predominant compounds, respectively. The extracts' TPC showed a strong negative correlation with the DPPH (2,2-diphenyl-1-picrylhydrazyl) assay (r = -0.999; p = 0.023). In addition, the TFC correlated significantly with the ABTS (2,2'-azino-di-(3-ethylbenzthiazoline sulfonic acid)) assay (r = 0.999; p = 0.032). Thymus schimperi showed the highest antibacterial activity against clinical isolates of Escherichia coli and Klebsiella pneumoniae ESBL at 1000 mg/mL, and Ts had the lowest MIC (4 mg/mL) among evaluated extracts against E. coli (ATCC25922). In conclusion, Ts and Rp possess higher predicted bioactive molecules, including antioxidant and antibacterial activities, which are potentially useful in treating urinary tract infections.

Metabolic Engineering and Process Intensification for Muconic Acid Production Using Saccharomyces cerevisiae

The efficient production of biobased organic acids is crucial to move to a more sustainable and eco-friendly economy, where muconic acid is gaining interest as a versatile platform chemical to produce industrial building blocks, including adipic acid and terephthalic acid. In this study, a Saccharomyces cerevisiae platform strain able to convert glucose and xylose into cis,cis-muconic acid was further engineered to eliminate C2 dependency, improve muconic acid tolerance, enhance production and growth performance, and substantially reduce the side production of the intermediate protocatechuic acid. This was achieved by reintroducing the PDC5 gene and overexpression of QDR3 genes. The improved strain was integrated in low-pH fed-batch fermentations at bioreactor scale with integrated in situ product recovery. By adding a biocompatible organic phase consisting of CYTOP 503 and canola oil to the process, a continuous extraction of muconic acid was achieved, resulting in significant alleviation of product inhibition. Through this, the muconic acid titer and peak productivity were improved by 300% and 185%, respectively, reaching 9.3 g/L and 0.100 g/L/h in the in situ product recovery process as compared to 3.1 g/L and 0.054 g/L/h in the control process without ISPR.

Millettia aboensis leaves extract as eco-friendly corrosion inhibitor for mild steel in acidizing solution: From experimental to molecular level prediction

The development of environmentally friendly corrosion inhibitors is becoming more popular since conventional inhibitors are poisonous and non-biodegradable. The anti-corrosive effectiveness of Millettia aboensis leaves extract (MALE) has been assessed in this study using several methods, such as electrochemical measurements, X-ray Photoelectron spectroscopy and scanning electron microscopy on mild steel in acidic solution. Gas chromatography-mass spectrometry (GC-MS) analysis was combined with qualitative and quantitative phytochemical analysis to identify the phytochemicals linked to the activity of the Millettia aboensis extracts and identified key phytoconstituents such as Hexanedioic acid, Phenol derivatives, Octadecanoic acid, and Linolenic acid, which play significant roles in the extract's inhibitory performance. The results showed that the inhibition efficiency (IE%) improved to 88.6 % with the addition of inhibitor concentration from 0.1 g/L to 3.0 g/L and that the corrosion rate drastically reduced from 56.91 mpy to 16.09 mpy. Furthermore, at a greater concentration (3.0 g/L), the Rct values rose from 61.42 Ω cm2 to 176.3 Ω cm2 thus, indicating that the inhibitor molecules were forming a protective film over the metallic surface. Scanning Electron Microscopy (SEM) provided visual evidence of surface morphology, revealing a smoother surface in the presence of the inhibitor, indicative of the protective film formed by the adsorption of organic molecules onto the steel surface. Theoretical calculations using the ωB97XD functional and def2svp basis set further supported the experimental findings, showing that the protonated form of C21H36O4 exhibited the highest interaction energy, correlating with its superior inhibition efficiency on the metal surface.

Novel Bioproduction of 1,6-Hexamethylenediamine from l-Lysine Based on an Artificial One-Carbon Elongation Cycle.

1,6-hexamethylenediamine (HMD) is an important precursor for nylon-66 material synthesis, while research on the bioproduction of HMD has been relatively scarce in scientific literature. As concerns about climate change, environmental pollution, and the depletion of fossil fuel reserves continue to grow, the significance of producing fundamental chemicals from renewable sources is becoming increasingly prominent. In recent investigations, the bioproduction of HMD from adipic acid has been reported but with lingering challenges concerning costly raw materials and low yields. Here, we have undertaken the reconstruction of the HMD synthetic pathway within Escherichia coli, which was constituted with l-lysine α-oxidase (Raip), LeuABCD, α-ketoacid decarboxylase (KivD), and transaminases (Vfl), leveraging a carbon chain extension module and a metabolic pathway of transaminase-decarboxylase cascade catalysis within the strain WD20, which successfully produce 46.7 ± 2.0 mg/L HMD. To increase the cascade activity and create a higher tolerance to external environmental disturbance for l-lysine to convert into HMD, another two enzymes d-alanine aminotransferase (Dat) and alpha-ketoacid decarboxylase (KdcA) were introduced into WD21 to provide flux flexibility for α-ketoacid metabolization, which was named "Smart-net metabolic engineering" in our research, and high-efficiency synthesis of HMD utilizing l-lysine as the substrate has been successfully achieved. Finally, we established a + 1C bioconversion multienzyme cascade catalyzing up to 65% conversion of l-lysine to HMD. Notably, our fermentation process yielded an impressive 213.5 ± 8.7 mg/L, representing the highest reported yield to date for the bioproduction of HMD from l-lysine.

Discrete versus polymeric structures of coordination compounds of copper(II) with (pyridin-2-yl)methylenenicotinohydrazide and a library of dicarboxylic acids

A series of copper(II) discrete and polymeric coordination compounds, namely [{CuL(H2O)}2(fum)] (1), [{CuL(H2O)}2(mes)] (2), [Cu2L2(glu)]n·2n(H2O) (3·2n(H2O)) and [Cu3L2(adi)2]n (4) were fabricated from (pyridin-2-yl)methylenenicotinohydrazide (HL) and a library of dicarboxylic acids, namely fumaric acid (H2fum), mesaconic acid (H2mes), glutaric acid (H2glu) and adipic acid (H2adi), using evaporative crystallization, grinding and slurry synthesis methods. The obtained coordination compounds have been fully characterized by single crystal X-ray diffraction revealing different types of complexes depending on the linker length, viz. from dinuclear complexes for the shorter linkers (fumaric and mesaconic acids) to 1D and 2D coordination polymers for longer glutaric and adipic acids. Thermal stability and spectroscopic features (FTIR and diffuse reflectance) of complexes were also studied. For the nonpolymeric compounds 1 and 2, the supramolecular assemblies driven by a combination of antiparallel π-stacking and hydrogen bonding interactions have been studied and compared using DFT calculations, MEP surface analysis and a combination of QTAIM and NCIplot computational tools.

Partially Bio-Based and Biodegradable Poly(Propylene Terephthalate-Co-Adipate) Copolymers: Synthesis, Thermal Properties, and Enzymatic Degradation Behavior.

A series of partially bio-based and biodegradable poly(propylene terephthalate-co-adipate) (PPTA) random copolymers with different components were prepared by the melt polycondensation of petro-based adipic acid and terephthalic acid with bio-based 1,3-propanediol. The microstructure, crystallization behavior, thermal properties, and enzymatic degradation properties were further investigated. The thermal decomposition kinetics was deeply analyzed using Friedman's method, with the thermal degradation activation energy ranging from 297.8 to 302.1 kJ/mol. The crystallinity and wettability of the copolymers decreased with the increase in the content of the third unit, but they were lower than those of the homopolymer. The thermal degradation activation energy E, carbon residue, and reaction level n all showed a decreasing trend. Meanwhile, the initial thermal decomposition temperature (Td) was higher than 350 °C, which can meet the requirements for processing and use. The PPTA copolymer material still showed excellent thermal stability. Adding PA units could regulate the crystallinity, wettability, and degradation rate of PPTA copolymers. The composition of PPTA copolymers in different degradation cycles was characterized by 1H NMR analysis. Further, the copolymers' surface morphology during the process of enzymatic degradation also was observed by scanning electron microscopy (SEM). The copolymers' enzymatic degradation accorded with the surface degradation mechanism. The copolymers showed significant degradation behavior within 30 days, and the rate increased with increasing PA content when the PA content exceeded 45.36%.

Insights into the Synergistic Catalytic Effect of TiO2 Supported V-W Oxides for Selective C-H Bond Oxidation of Cyclohexane to KA Oil.

It is urgent to develop an efficient and stable non-noble metal catalyst for selective C-H bond oxidation of cyclohexane. Herein, a series of V-W oxides supported on TiO2catalysts (V-W/TiO2) were fabricated. The V-W/TiO2catalysts exhibited much higher catalytic activity for the selective oxidation of cyclohexane to KA oil, compared to that of V/TiO2and W/TiO2catalysts. The good distribution of active metals and the synergistic effect were responsible for the enhanced catalytic activity. H2-TPR results disclosed that the presence of V inV-W/TiO2 affected the reducibility of W6+species, and XPS verified that an electronic interaction was formed between them. Such results led to good catalytic reusability of V-W/TiO2catalyst during the reactions, and no obvious activity loss was found after six runs. The reaction mechanism was investigated, and the results verified that hydroxyl radicals generated from H2O2homolysis were the main active oxidative species. Theoretical study revealed that V dopant could regulate electronic structure of adjacent O atom, facilitating the adsorption of cyclohexane, and lower energy was needed for the rate-limiting step over V-W/TiO2during the whole oxidation reaction. This work developed an efficient V-W/TiO2catalyst for the selective oxidation of cyclohexane via a synergistic effect.

Towards Sustainable Production of Polybutylene Adipate Terephthalate: Non-biological Catalytic Syntheses of Biomass-derived Constituents.

Renewable chemicals, which are made from renewable resources such as biomass, have attracted significant interest as substitutes for natural gas- or petroleum-derived chemicals to enhance the sustainability of the chemical and petrochemical industries. Polybutylene adipate terephthalate (PBAT), which is a copolyester of 1,4-butanediol (1,4-BDO), adipic acid (AA), and dimethyl terephthalate (DMT) or terephthalic acid (TPA), has garnered significant interest as a biodegradable polymer. This study assesses the non-biological production of PBAT monomers from biomass feedstocks via heterogeneous catalytic reactions. The biomass-based catalytic routes to each monomer are analyzed and compared to conventional routes. Although no fully commercialized catalytic processes for direct conversion of biomass into 1,4-BDO, AA, DMT, and TPA are available, emerging and promising catalytic routes have been proposed. The proposed biomass-based catalytic pathways toward 1,4-BDO, AA, DMT, and TPA are not yet fully competitive with conventional fossil fuel-based pathways mainly due to high feedstock prices and the existence of other alternatives. However, given continuous technological advances in the renewable production of PBAT monomers, bio-based PBAT should be economically viable in the near future.

Electrosynthesis of adipic acid with high faradaic efficiency within a wide potential window

Electrosynthesis of adipic acid (a precursor for nylon-66) from KA oil (a mixture of cyclohexanone and cyclohexanol) represents a sustainable strategy to replace conventional method that requires harsh conditions. However, its industrial possibility is greatly restricted by the low current density and competitive oxygen evolution reaction. Herein, we modify nickel layered double hydroxide with vanadium to promote current density and maintain high faradaic efficiency (>80%) within a wide potential window (1.5 ~ 1.9 V vs. reversible hydrogen electrode). Experimental and theoretical studies reveal two key roles of V modification, including accelerating catalyst reconstruction and strengthening cyclohexanone adsorption. As a proof-of-the-concept, we construct a membrane electrode assembly, producing adipic acid with high faradaic efficiency (82%) and productivity (1536 μmol cm−2 h−1) at industrially relevant current density (300 mA cm−2), while achieving >50 hours stability. This work demonstrates an efficient catalyst for adipic acid electrosynthesis with high productivity that shows industrial potential.

A Heterogeneous Acid-Base Organocatalyst For Cascade Deacetalisation-Knoevenagel Condensations.

Multifunctional heterogeneous catalysts are an effective strategy to drive chemical cascades, with attendant time, resource and cost efficiencies by eliminating unit operations arising in normal multistep processes. Despite advances in the design of such catalysts, the fabrication of proximate, chemically antagonistic active sites remains a challenge for inorganic materials science. Hydrogen-bonded organocatalysts offer new opportunities for the molecular level design of multifunctional structures capable of stabilising antagonistic active sites. We report the catalytic application of a charge-assisted, hydrogen-bonded crystalline material, bis(melaminium)adipate (BMA), synthesised from melamine and adipic acid, which possesses proximate acid-base sites. BMA exhibits high activity for the cascade deacetalisation-Knoevenagel condensation of dimethyl acetals to form benzylidenemalononitriles under mild conditions in water; BMA is amenable to large-scale manufacture and recycling with minimal deactivation. Computational modelling of the melaminium cation in protonated BMA explains the observed catalytic reactivity, and identifies the first demethoxylation step as rate-limiting, in good agreement with time-dependent 1H NMR and kinetic experiments. A broad substrate scope for the cascade transformation of aromatic dimethyl acetals is demonstrated.

Recent Advances in Electrochemical Carboxylation with CO2.

ConspectusCarbon dioxide (CO2) is recognized as a greenhouse gas and a common waste product. Simultaneously, it serves as an advantageous and commercially available C1 building block to generate valuable chemicals. Particularly, carboxylation with CO2 is considered a significant method for the direct and sustainable production of important carboxylic acids. However, the utilization of CO2 is challenging owing to its thermodynamic stability and kinetic inertness. Recently, organic electrosynthesis has emerged as a promising approach that utilizes electrons or holes as environmentally friendly redox reagents to produce reactive intermediates in a controlled and selective manner. This technique holds great potential for the CO2 utilization.Since 2015, our group has been dedicated to exploring the utilization of CO2 in organic synthesis with a particular focus on electrochemical carboxylation. Despite the significant advancements made in this area, there are still many challenges, including the activation of inert substrates, regulation of selectivity, diversity in electrolysis modes, and activation strategies. Over the past 7 years, our team, with many great experts, has presented findings on electrochemical carboxylation with CO2 under mild conditions. In this context, we primarily highlight our contributions to selective electrocarboxylations, encompassing new reaction systems, selectivity control methods, and activation approaches.We commenced our research by establishing a Ni-catalyzed electrochemical carboxylation of unactivated aryl halides and alkyl bromides in conjunction with a useful paired anodic reaction. This approach eliminates the need for sacrificial anodes, rendering the carboxylation process sustainable. To further utilize the widely existing yet cost-effective alkyl chlorides, we have developed a deep electroreductive system to achieve carboxylation of unactivated alkyl chlorides and poly(vinyl chloride), allowing the direct modification and upgrading of waste polymers.Through precise adjustment of the electroreductive conditions, we successfully demonstrated the dicarboxylation of both strained carbocycles and acyclic polyarylethanes with CO2 via C-C bond cleavage. Furthermore, we have realized the dicarboxylative cyclization of unactivated skipped dienes to produce the valuable ring-tethered adipic acids through single-electron reduction of CO2 to the CO2 radical anion (CO2•-). In terms of the asymmetric carboxylation, Guo's and our groups have recently achieved the nickel-catalyzed enantioselective electroreductive carboxylation reaction using racemic propargylic carbonates and CO2, paving the way for the synthesis of enantioenriched propargylic carboxylic acids.In addition to the aforementioned advancements, Lin's and our groups have also developed new electrolysis modes to achieve regiodivergent C-H carboxylation of N-heteroarenes dictated by electrochemical reactors. The choice of reactors plays a crucial role in determining whether the hydrogen atom transfer (HAT) reagents are formed anodically, consequently influencing the carboxylation pathways of N-heteroarene radical anions in the distinct electrolyzed environments.

Production of bio-based adipic acid using a combination of engineered Pseudomonas putida strains

Adipic acid is an industrially important dicarboxylic acid and an essential precursor in the synthesis of Nylon-6,6. Due to the environmental impact associated with the current synthetic methods for Nylon-6,6 production, greener alternatives based on renewable and bio-based feedstocks are needed. In the present study, the potential of two Pseudomonas putida strains engineered for muconic acid accumulation was used to produce adipic acid from the lignin-derived aromatic compound guaiacol. This was achieved by expressing genes enabling the conversion of guaiacol to catechol in the first strain, and the conversion of muconic acid to adipic acid via expression of the Bacillus coagulans enoate reductase gene in the second strain. Through process engineering, a 2-step production was designed in which 2.93 mM bio-adipic acid was produced, with a yield of 0.57 mol/mol. This is the first demonstration that process and strain engineering can be combined to obtain a complete bio-based route for adipic acid production from depolymerized lignin compounds using the robust P. putida chassis.

Tin-Based Keggin-Type Phosphomolybdate and Silicomolybdate as Catalysts for the Green Synthesis of Adipic Acid

The catalytic activity of two series of Keggin-type salts of formula Cs4-xSnxSiMo12O40 (x: 0.5 and 1) and Cs3-xSnxPMo12O40 (x: 0.25-1) was examined in the liquid phase cyclohexanone oxidation to adipic acid (AA) in the solvent absence. The materials were prepared and characterized by FTIR, UV-Vis and SEM. The adipic acid synthesis was carried out at 90°C in presence of hydrogen peroxide (30%), a green oxidant that produces only water as by-product. The effects of catalyst/substrate molar ratios and time reaction on dipic acid yields were studied. The results of this study showed that the POM-H2O2 system was found to be efficient for the production of adipic acid from the oxidation of cyclohexanone and the yields were closely dependent on the operating conditions. The highest AA yield (55%) was obtained with Cs2Sn0.5PMo12O40 using a catalyst/substrate molar ratio of 3.7×10-3 and a reaction time of 20h.

Metabolomic profiles differentiate between porto-sinusoidal vascular disorder, cirrhosis, and health

Background & AimsPorto-sinusoidal vascular disorder (PSVD) is a rare and diagnostically challenging vascular liver disease. This study aimed to identify distinct metabolomic signatures in patients with PSVD, cirrhosis, and healthy volunteers (HV) to facilitate non-invasive diagnosis and elucidate perturbed metabolic pathways. MethodsSerum samples from 20 HV and patients with histologically confirmed PSVD or cirrhosis were analyzed. Metabolites were measured using liquid chromatography-mass spectrometry (LC-MS). Differential abundance was evaluated with Limma’s moderated t-statistics. Artificial neural network (ANN) and support vector machine (SVM) models were developed to classify PSVD against cirrhosis or HV metabolomic profiles. An independent cohort was used for validation. ResultsA total of 283 metabolites were included for downstream analysis. Clustering effectively separated PSVD metabolomes from HV, although a subset of PSVD patients (n=5, 25%) overlapped with cirrhosis. Differential testing revealed significant PSVD-linked metabolic perturbations, including taurocholic and adipic acids, distinguishing PSVD from both HV and cirrhosis. Alterations in pyrimidine, glycine, serine, and threonine pathways were exclusively associated with PSVD. Machine learning models utilizing selected metabolic signatures reliably differentiated PSVD from HV or cirrhosis using only 4 to 6 metabolites. Validation in an independent cohort demonstrated the high discriminative ability of taurocholic acid (AUROC 0.899) for PSVD vs HV and the taurocholic acid/aspartic acid ratio (AUROC 0.720) for PSVD vs cirrhosis. ConclusionsHigh-throughput metabolomics enabled the identification of distinct metabolic profiles for differentiating PSVD, cirrhosis, and healthy individuals. Unique alterations in the glycine, serine, and threonine pathways suggest their potential involvement in PSVD pathogenesis. Impact And ImplicationsPorto-sinusoidal vascular disorder (PSVD) is a vascular liver disease that can lead to pre-sinusoidal portal hypertension in the absence of cirrhosis, with poorly understood pathophysiology and no established treatment. Our study demonstrates that analyzing the serum metabolome could reveal distinct metabolic signatures in PSVD patients, including alterations in the pyrimidine, glycine, serine and threonine pathways and potentially shedding light on the disease's underlying pathways. These findings hold potential for earlier and non-invasive diagnosis of PSVD, potentially reducing reliance on invasive procedures like liver biopsy and guiding diagnostic pathways.

Maximizing biomass utilization: An integrated strategy for coproducing multiple chemicals

Lignocellulosic biomass is one of the viable solutions to alleviate the global warming. However, the limited utilization of biomass majorly focused on cellulose and hemicellulose restricts the economic and environmental feasibilities. To cope with this issue, we proposed an integrated process of co-producing 1,6-hexanediol (1,6-HDO) with tetrahydrofuran and adipic acid from biomass, referred to as Strategy A. To compare the impacts of lignin upgrading and feedstock, Strategy B, which co-produces tetrahydrofuran alone, and Strategy C, which is the traditional route to produce 1,6-HDO from fossil fuels, were used. Heat networks are also designed to reduce operating costs and indirect carbon emissions due to energy consumption, saving 87% and 83% of the heat and cooling requirements, respectively, in Strategy A. The market competitiveness of Strategy A was evaluated by determining the minimum selling price through techno-economic analysis, and sustainability was thoroughly investigated by quantifying the environmental impacts through both midpoint and endpoint life-cycle assessments (LCAs). Strategy A was found to be the most favorable both economically (US$3,402/ton) and environmentally (−26.9 kg CO2 eq.). This indicates that lignin valorization is not only economically but also environmentally preferred. Finally, changes in economic and environmental feasibilities depending on economic, process, and environmental parameters were investigated using sensitivity and uncertainty analyses. The results of these analyses provide valuable insight into bio-based chemical production.

Adipic acid-mediated hydrogen bonding network allocation for efficient proton conduction in water-stabilized lamellar MOF membranes

The poor water-stability and cross-layer proton transfer property pose a challenge to the lamellar metal–organic frameworks (MOFs) membrane when acting as a promising proton exchange membrane. Herein, we report an adipic acid-mediated strategy to improve the water-stability and the cross-layer proton conductivity of CuTCPP lamellar MOF membrane, which achieves a maximum power density and current density of 112.6 mW cm−2 and 424.4 mA cm−2, respectively. Adipic acid with extra functional groups (–PO3H2, –COOH) stably bridges the adjacent crystal layers via the terminal carboxylic acid anchoring Cu sites. In particular, the extra functional groups introduced into the adipic acid regulate the allocation of hydrogen bonding networks in an umbrella-shape around adipic acid with copper-porphyrin structures as external margin, enriching the coherence of hydrogen bonding network on the proton transport path. Benefiting from the regular pore structure of MOF, the optimized hydrogen bonding networks in adjacent crystal layers construct a more abundant through-plane transfer pathway. The resultant through-plane proton conductivities of CuTCPP-PO3H2/–COOH membranes are up to 108/89 mS cm−1 at 80 °C and 100 % RH, which is ∼ 6-fold higher than that of the pristine CuTCPP membrane (13 mS cm−1), with a conductivity attenuation of < 5 % during a humidity cycling test for 12 times.