Ab Initio Quantum Chemical Calculations Research Articles

Deep eutectic solvent-functionalized amorphous UiO-66 for efficient extraction and ultrasensitive analysis of perfluoroalkyl substances in infant milk powder

In this study, a convenient and effective method for determination of perfluoroalkyl substances (PFASs) in infant formula was developed based on a novel dispersive solid-phase extraction using deep eutectic solvent-functionalized amorphous UiO-66 (DES/aUiO-66) as sorbent. The synthesis of materials could be achieved without the use of complex and environmentally unfriendly procedures. Parameters were systematically investigated to establish a simple, fast, and efficient green pretreatment method. The method demonstrated high sensitivity, good precision, a detection limit of 0.330–0.529 ng·kg−1, and low matrix effects (< 12.8%). The mechanism for this material was elucidated by ab initio molecular dynamics (AIMD) simulations and quantum chemistry calculations. The presence of massive pore structures and collectively synergistic binding sites facilitated affinity adsorption toward PFASs. Finally, this method was applied to the monitoring of PFASs in 10 actual milk powder samples. This groundbreaking approach opens new possibilities for the advancement of analytical techniques and food safety monitoring.

Quantum chemical calculations of electron affinities of alkaline earth metal atoms (Ca, Sr, Ba, and Ra)

We performed high-level ab initio quantum chemical calculations, incorporating higher-order excitations, spin–orbit coupling (SOC), and the Gaunt interaction, to calculate the electron affinities (EAs) of alkaline earth (AE) metal atoms (Ca, Sr, Ba, and Ra), which are notably small. The coupled-cluster singles and doubles with perturbative triples [CCSD(T)] method is insufficient to accurately calculate the EAs of AE metal atoms. Higher-order excitations proved crucial, with the coupled-cluster singles, doubles, and triples with perturbative quadruples [CCSDT(2)Q] method effectively capturing dynamic electron correlation effects. The contributions of SOC (ΔESOs) to the EAs calculated using the multireference configuration interaction method with the Davidson correction, including SOC, positively enhance the EAs; however, these contributions are overestimated. The Dirac–Hartree–Fock (DHF)-CCSD(T) method addresses this overestimation and provides reasonable values for ΔESO (ΔESO−D). Employing additional sets of diffuse and core–valence correlation basis sets is critical for accurately calculating the EAs of AE metal atoms. The contributions of the Gaunt interaction (ΔEGaunt) to the EAs of AE metal atoms are negligible. Notably, the CCSDT(2)Q with the complete basis set limit + ΔESO−D + ΔEGaunt produced EA values for Ca, Sr, and Ba that closely aligned with experimental data and achieved accuracy exceeding the chemical accuracy. Based on our findings, the accurately proposed EA for Ra is 9.88 kJ/mol.

Development of an Elementary Reaction-Based Kinetic Model to Predict the Aqueous-Phase Fate of Organic Compounds Induced by Reactive Free Radicals.

ConspectusAqueous-phase free radicals such as reactive oxygen, halogen, and nitrogen species play important roles in the fate of organic compounds in the aqueous-phase advanced water treatment processes and natural aquatic environments under sunlight irradiation. Predicting the fate of organic compounds in aqueous-phase advanced water treatment processes and natural aquatic environments necessitates understanding the kinetics and reaction mechanisms of initial reactions of free radicals with structurally diverse organic compounds and other reactions. Researchers developed conventional predictive models based on experimentally measured transformation products and determined reaction rate constants by fitting with the time-dependent concentration profiles of species due to difficulties in their measurements of unstable intermediates. However, the empirical treatment of lumped reaction mechanisms had a model prediction limitation with respect to the specific parent compound's fate. We use ab initio and density functional theory quantum chemical computations, numerical solutions of ordinary differential equations, and validation of the outcomes of the model with experiments. Sensitivity analysis of reaction rate constants and concentration profiles enables us to identify an important elementary reaction in formating the transformation product. Such predictive elementary reaction-based kinetics models can be used to screen organic compounds in water and predict their potentially toxic transformation products for a specific experimental investigation.Over the past decade, we determined linear free energy relationships (LFERs) that bridge the kinetic and thermochemical properties of reactive oxygen species such as hydroxyl radicals (HO•), peroxyl radicals (ROO•), and singlet oxygen (1O2); reactive halogen species such as chlorine radicals (Cl•) and bromine radicals (Br•); reactive nitrogen species (NO2•); and carbonate radicals (CO3•-). We used literature-reported experimental rate constants as kinetic information. We considered the theoretically calculated aqueous-phase free energy of activation or reaction to be a kinetic or a thermochemical property, and obtained via validated ab initio or density functional theory-based quantum chemical computations using explicit and implicit solvation models. We determined rate-determining reaction mechanisms involved in reactions by observing robust LFERs. The general accuracy of LFERs to predict aqueous-phase rate constants was within a difference of a factor of 2-5 from experimental values.We developed elementary reaction-based kinetic models and predicted the fate of acetone induced by HO• in an advanced water treatment process and methionine by photochemically produced reactive intermediates in sunlit fresh waters. We provided mechanistic insight into peroxyl radical reaction mechanisms and critical roles in the degradation of acetone and the formation of transformation products. We highlighted different roles of triplet excited states of two surrogate CDOMs, 1O2, and HO•, in methionine degradation. Predicted transformation products were compared to those obtained via benchtop experiments to validate our elementary reaction-based kinetic models. Predicting the reactivities of reactive halogen and nitrogen species implicates our understanding of the formation of potentially toxic halogen- and nitrogen-containing transformation products during water treatment processes and in natural aquatic environments.

Systematic Study of Different Types of Interactions in α-, β- and γ-Cyclodextrin: Quantum Chemical Investigation.

In this work, comprehensive ab initio quantum chemical calculations using the DFT level of theory were performed to characterize the stabilization interactions (H-bonding and hyperconjugation effects) of two stable symmetrical conformations of α-, β-, and γ-cyclodextrins (CDs). For this purpose, we analyzed the electron density using "Atom in molecules" (AIM), "Natural Bond Orbital" (NBO), and energy decomposition method (CECA) in 3D and in Hilbert space. We also calculated the H-bond lengths and OH vibrational frequencies. In every investigated CD, the quantum chemical descriptors characterizing the strength of the interactions between the H-bonds of the primary OH (or hydroxymethyl) and secondary OH groups are examined by comparing the same quantity calculated for ethylene glycol, α-d-glucose (α-d-Glcp) and a water cluster as reference systems. By using these external standards, we can characterize more quantitatively the properties of these bonds (e.g., strength). We have demonstrated that bond critical points (BCP) of intra-unit H-bonds are absent in cyclodextrins, similar to α-d-Glcp and ethylene glycol. In contrast, the CECA analysis showed the existence of an exchange (bond-like) interaction between the interacting O…H atoms. Consequently, the exchange interaction refers to a chemical bond, namely the H-bond between two atoms, unlike BCP, which is not suitable for its detection.

Interpretation of molecular electron transport in ab initio many-electron framework incorporating zero-point nuclear motion effects.

A computational methodology, founded on chemical concepts, is presented for interpreting the role of nuclear motion in the electron transport through single-molecule junctions (SMJ) using many-electron ab initio quantum chemical calculations. Within this approach the many-electron states of the system, computed at the SOS-ADC(2) level, are followed along the individual normal modes of the encapsulated molecules. The inspection of the changes in the partial charge distribution of the many-electron states allows the quantification of the electron transport and the estimation of transmission probabilities. This analysis improves the understanding of the relationship between internal motions and electron transport. Two SMJ model systems are studied for validation purposes, constructed from a conductor (BDA, benzene-1,4-diamine) and an insulator molecule (DABCO, 1,4-diazabicyclo[2.2.2]octane). The trends of the resulting transmission probabilities are in agreement with the experimental observations, demonstrating the capability of the approach to distinguish between conductor and insulator type systems, thereby offering a straightforward and cost-effective tool for such classifications via quantum chemical calculations.

Theoretical investigation of distal charge separation in a perylenediimide trimer

An exciton–phonon (ex–ph) model based on our recently developed block interaction product basis framework is introduced to simulate the distal charge separation (CS) process in aggregated perylenediimide (PDI) trimer incorporating the quantum dynamic method, i.e., the time-dependent density matrix renormalization group. The electronic Hamiltonian in the ex–ph model is represented by nine constructed diabatic states, which include three local excited (LE) states and six charge transfer (CT) states from both the neighboring and distal chromophores. These diabatic states are automatically generated from the direct products of the leading localized neutral or ionic states of each chromophore’s reduced density matrix, which are obtained from ab initio quantum chemical calculation of the subsystem consisting of the targeted chromophore and its nearest neighbors, thus considering the interaction of the adjacent environment. In order to quantum-dynamically simulate the distal CS process with massive coupled vibrational modes in molecular aggregates, we used our recently proposed hierarchical mapping approach to renormalize these modes and truncate those vibrational modes that are not effectively coupled with electronic states accordingly. The simulation result demonstrates that the formation of the distal CS process undergoes an intermediate state of adjacent CT, i.e., starts from the LE states, passes through an adjacent CT state to generate the intermediates (∼200 fs), and then formalizes the targeted distal CS via further charge transference (∼1 ps). This finding agrees well with the results observed in the experiment, indicating that our scheme is capable of quantitatively investigating the CS process in a realistic aggregated PDI trimer and can also be potentially applied to exploring CS and other photoinduced processes in larger systems.

Unconventional Surface Doping Effect on the Spin State of an Adsorbed Magnetic Molecule.

Magnetic molecules adsorbed on two-dimensional (2D) substrates have attracted broad attention because of their potential applications in quantum device applications. Experimental observations have demonstrated substantial alteration in the spin excitation energy of iron phthalocyanine (FePc) molecules when adsorbed on nitrogen-doped graphene substrates. However, the underlying mechanism responsible for this notable change remains unclear. To shed light on this, we employ an embedding method and ab initio quantum chemistry calculations to investigate the effects of surface doping on molecular properties. Our study unveils an unconventional chemical bonding at the interface between the FePc molecule and the N-doped graphene. This bonding interaction, stronger than non-covalent interactions, significantly modifies the magnetic anisotropy energy of the adsorbed molecule, consistent with experimental observations. These findings provide valuable insights into the electronic and magnetic properties of molecules on 2D substrates, offering a promising pathway for precise manipulation of molecular spin states.

High-Resolution Photoelectron Spectroscopy of the Ground and First Excited Electronic States of MgXe.

We report on the characterization of the X+ 2Σ+ ground and the A+ 2ΠΩ (Ω = 1/2, 3/2) and B+ 2Σ+ electronically excited states of MgXe+. Rotationally cold MgXe in the a 3Π0(v″ = 0) metastable electronic state was generated in a laser-ablation supersonic-beam source. Following single-photon excitation from the metastable state, the vibrational structure of the X+ state of MgXe+ was measured by pulsed-field-ionization zero-kinetic-energy photoelectron spectroscopy, and the adiabatic ionization energy of the X+ ← a ionizing transition was determined to be EI/(hc) = 37,468.3(6) cm-1. Spectra of the A+ ← X+ and B+ ← X+ transitions were recorded by using the method of isolated-core Rydberg-dissociation spectroscopy. The observation of the Mg+(3p) 2P1/2 + Xe 1S0 dissociation limit enabled the determination of the dissociation energies of the X+ [D0(X+) = 2970(7) cm-1] and A+ states [D0(A1/2+) = 9781(7) cm-1 and D0(A3/2+) = 9603(7) cm-1]. We compare these results with those of earlier experimental studies and ab initio quantum-chemical calculations.

Dissipative Particle Dynamics Simulation for Reaction-Induced Phase Separation of Thermoset/Thermoplastic Blends.

Reaction-induced phase separation occurs during the curing reaction when a thermoplastic resin is dissolved in a thermoset resin, which enables toughening of the thermoset resin. As resin properties vary significantly depending on the morphology of the phase-separated structure, controlling the morphology formation is of critical importance. Reaction-induced phase separation is a phenomenon that ranges from the chemical reaction scale to the mesoscale dynamics of polymer molecules. In this study, we performed curing simulations using dissipative particle dynamics (DPD) coupled with a reaction model to reproduce reaction-induced phase separation. The curing reaction properties of the thermoset resin were determined by ab initio quantum chemical calculations, and the DPD parameters were determined by all-atom molecular dynamics simulations. This enabled mesoscopic simulations, including reactions that reflect the intrinsic material properties. The effects of the thermoplastic resin concentration, molecular weight, and curing conditions on the phase-separation morphology were evaluated, and the cure shrinkage and stiffness of each cured resin were confirmed to be consistent with the experimental trends. Furthermore, the local strain field under tensile deformation was visualized, and the inhomogeneous strain field caused by the phase-separated structures of two resins with different stiffnesses was revealed. These results can aid in understanding the toughening properties of thermoplastic additives at the molecular level.

Novel complex compounds of nickel with 3-(1-phenyl-2,3-dimethyl-pyrazolone-5)azopentadione-2,4: synthesis, NBO analysis, reactivity descriptors and in silico and in vitro anti-cancer and bioactivity studies

A synthesized azo compound based on 4-amino antipyrine and its complexes with Ni(II) in solution and solid phase is reported. The structures of these compounds have been testified by IR and NMR spectroscopy. The combined experimental and theoretical approach was used. To study the structure and properties of the synthesized compound, as well as its possible complex formation with the Ni(II), ab initio quantum-chemical calculations were carried out using the Hartree-Fock (HF) method with the 6-31 G basis set and the electron density functional theory (DFT) method with hybrid three-parameter potential B3LYP and extended basis set 6-311++G(d,p) taking into account polarization and diffuse functions for all atoms. The geometric, energy, and electronic parameters were calculated and analyzed. The HOMO-LUMO energy gap has been calculated to determine chemical activity. Both complexes had effective inhibition against butyrylcholinesterase and acetylcholinesterase. IC50 values were found as 19.43 and 27.08 µM for AChE, 2.37 and 7.40 µM for BChE, respectively. For the anticancer outcome, high doses of compound E1 inhibited viability by about 40–45%, while this rate was around 65–70% for compound E2 at the same doses. Anticholinesterase and anticancer potential of compounds E1 and E2 also evaluated by in silico techniques. Both compounds show strong binding to VEGFR1, with E2 exhibiting superior inhibitory activity in hAChE and hBChE through shorter and stronger interactions. MD simulations suggest that E2 forms more stable complexes with hAChE and hBChE compared to E1, making it a promising candidate for further exploration in anticancer and anticholinesterase therapies. Communicated by Ramaswamy H. Sarma

High-resolution photoelectron spectroscopy of the very weakly bound MgNe molecule

ABSTRACT We report on the characterisation of the X + 2 Σ + ground electronic state of MgNe + by photoionisation, mass-analysed threshold-ionisation (MATI) and pulsed-field-ionisation zero-kinetic-energy photoelectron (PFI-ZEKE-PE) spectroscopy and the observation of the metastable a 3 Π 0 state of MgNe. Rotationally cold MgNe was generated in a laser-ablation supersonic-beam source in both the X 1 Σ + ( v ″ = 0 ) ground state and a 3 Π 0 ( v ″ = 0 ) metastable electronic state. PFI-ZEKE-PE spectra with full resolution of the vibrational structure and partial resolution of the rotational structure were recorded from the X 1 Σ + ground state following resonant ( 1 + 1 ′ ) two-photon excitation via selected rovibrational levels of the C 1 Π intermediate state and from the a 3 Π 0 metastable state following single-photon excitation. The lowest six vibrational levels of the X + 2 Σ + state were observed, covering 80% of the X + 2 Σ + potential-well depth. The experimental data were used to determine potential-energy functions, dissociation energies, and molecular constants for the X 1 Σ + , a 3 Π 0 and C 1 Π states of MgNe and the X + 2 Σ + state of MgNe + . With dissociation energies D 0 of 12(3) cm−1 and 10(3) cm−1, respectively, the X 1 Σ + and a 3 Π 0 states of 24 Mg 20 Ne are extremely weakly bound. In contrast, the X + 2 Σ + state of 24 Mg 20 Ne + has a dissociation energy D 0 of 185(3) cm − 1 and 12 bound vibrational levels. From the difference between the adiabatic ionisation energies of the X 1 Σ + (61 498.5(4) cm − 1 ) and the a 3 Π 0 (39 645.1(3) cm − 1 ) states, the term value of the a 3 Π 0 ground vibrational level is determined to be 21 853.4(5) cm − 1 . These results are compared with those of earlier experimental studies and ab initio quantum-chemical calculations.

Ozone-assisted low temperature oxidation of indene: An experimental and computational study

Elucidating the oxidation chemistry of polycyclic aromatic hydrocarbons (PAHs) aids in understanding the degradation reaction processes of PAHs, as well as their competitive roles in PAH growth. In this work, ozone-assisted oxidation of indene, the smallest prototype PAH molecule, was investigated in an atmospheric jet stirred reactor at 400–550 K. Ab initio quantum chemistry calculations were conducted to characterize the oxidation kinetics of indene and interpret the experimental observations. Fingerprint oxidation products including 2-(2-oxoethyl) benzoic acid, 2-(formylmethyl) benzaldehyde, 1,2-indanedione and 1-indanone were identified by synchrotron vacuum ultraviolet photoionization mass spectrometry. The initial C9H8O3 adduct resulting from O3-addition to indene exhibits high instability and is primarily detected as 2-(2-oxoethyl)benzoic acid following ozonolysis reactions. Minor amounts of vinylhydroperoxide were also observed as isomeric products of the C9H8O3 adduct. Theoretical calculations indicate that indene ozonolysis is highly structure-dependent, where the conformation of the C9H8O3 adduct determines the configuration of the resulting Criegee intermediates (CI). The distinctive reaction pathways introduced by the bifunctionalized characteristics of indene-derived large CIs are emphasized in this study. syn-Configuration CI features more conversion pathways compared to anti-CI due to the interaction between CI functionality and the neighboring aldehyde group, among which the bicyclic ring-closure reaction yielding secondary ozonide is most favored. The dioxirane intermediates generated from anti-CIs can undergo the Crossed Acid-forming channel to yield the target acid products, which provides an alternative way for dioxirane conversion. Further theoretical analyses demonstrate that ozonolysis is not the exclusive mechanism for indene oxidation under O3-assisted conditions. Instead, it is accompanied by low-temperature reactions initiated by OH/O2, leading to key products such as 2-(formylmethyl) benzaldehyde and 1-indanone. The present work aims to unravel the elusive chemistry involved in the O3-initiated oxidation of indene, providing new insights into the distinctive kinetics introduced by large bifunctionalized CIs in the ozonolysis of structurally similar PAHs.

Systematic Raman spectroscopic study of the complexation of uranyl with fluoride.

A simple aqueous complexing system of UO22+ with F- is selected to systematically illustrate the application of Raman spectroscopy in exploring uranyl(VI) chemistry. Five successive complexes, UO2F+, UO2F2(aq), UO2F3-, UO2F42-, and UO2F53-, are identified, as well as the formation constants except for the 1 : 5 species UO2F53-, which was experimentally observed here for the first time. The standard relative molar Raman scattering intensity for each species is obtained by deconvolution of the spectra collected during titrations. The results of relativistic quantum chemical first-principles and ab initio calculations are presented for the complete set of [UO2(H2O)mFn]2-n complexes (n = 0-5), both for the gas phase as well as for aqueous solution modelling bulk water using the conductor-like screening model. Electronic structure calculations at the Møller-Plesset second-order perturbation theory level provide accurate geometrical parameters and in particular reveal that k water molecules in the second coordination sphere coordinating to the F- ligands in the resulting [UO2(H2O)mFn]2-n(H2O)k complexes need to be treated explicitly in order to obtain vibrational frequencies in very good agreement with experimental data. The thermodynamics and structural information obtained in this work and the developed methodology could be instructive for the future experimental and computational research on the complexation of the uranyl ion.

Can the presence of a fluorine-containing functional group in eutectic mixtures indeed bring fluorous affinity for fluorotelomer alcohol?

We focus on deep eutectic solvents (DESs) and investigate their potential for perfluoroalkyl substance (PFAS) remediation through ab initio molecular dynamics (AIMD) simulations and quantum chemistry calculations.

Incoherent Nonreciprocal Absorbance Circular Dichroism of Uniaxial Assemblies.

Analytical theory is proposed predicting remarkably large and fully electric-dipole-allowed circular dichroism (CD) in electronic ultraviolet-visible (UV-vis) absorbance spectroscopy of uniaxial surface assemblies. Partial depolarization of the transmitted beam provides a pathway for surface-specific and chiral-specific dissymmetry parameters that are orders of magnitude greater than those from analogous measurements of isotropic systems. Predictions of the model generated using ab initio quantum chemical calculations with no adjustable parameters agreed with UV-vis absorbance CD measurements of naproxen microcrystals prepared on hydrophilic substrates. Notably, these calculations correctly predicted (i) the key spectroscopic features, (ii) the relative magnitudes of chiral-specific peaks in the CD spectrum, (iii) the absolute CD sign, and (iv) the reciprocal CD sign inversion arising from sample reorientation in the instrument. These results connect the molecular structure and orientation to large CD observable in oriented thin-film assemblies, with the potential for further extension to broad classes of chiral-specific spectral analyses.

Using orbital sensitivity analysis to pinpoint the role of orbital interactions in thermoelectric power factor

The modification of the electronic band structure is of critical importance for thermoelectric materials whose heat to electricity power generation is related to carrier effective mass and alignment of semiconductor band edges. One approach to optimize the electronic band structure is by modification of orbital interactions through doping or alloying. While the current ab-initio quantum chemical calculations can help us to investigate orbital components of electronic bands, they reveal little information on the relative tunability of electronic states and transport properties with respect to orbital interactions. In this work, we present a method, based on a symmetry-adapted tight-binding model and sensitivity analysis, that can pinpoint the role of orbital interactions in determining electronic band structure and transport properties. As an application, a systematic theoretical analysis is used to show how the power factor of PbTe can/cannot be improved by playing with interatomic orbital interactions. The orbital interaction sensitivity analysis introduced in this work can easily be applied to other compounds or properties.

Detailed kinetic mechanism of polyoxymethylene dimethyl ether 3 (PODE3). Part I: Ab initio thermochemistry and kinetic predictions for key reactions

In recent years, polyoxymethylene dimethyl ether 3 (PODE3) has emerged as a promising fuel additive to mitigate soot emissions in diesel engines, garnering significant research attention. Several detailed kinetic mechanisms of PODE3 have been developed to investigate its reaction pathways and to simulate its combustion process. Typically, these mechanisms employ analogy methods based on rate constants derived primarily from PODE1 sub-mechanisms. However, in this study, we present, for the first time, high-level ab initio quantum chemical calculations directly on PODE3 itself. (1) The bond dissociation energies (BDEs) of all CH and CO bonds in dimethyl ether (DME) and PODEn (n = 1–5) were calculated using combined compound methods (CBS-APNO/G3/G4). (2) The obtained BDE results were then utilized to investigate the unimolecular decomposition reactions of PODE3, demonstrating good agreement with previous Molecular Dynamics simulation results. (3) The rate constants of hydrogen abstraction reactions of PODE3 by H˙,C˙H3,CH3O˙,O˙H,HO˙2,O2 were calculated with all possible pre-reaction or post-reaction complexes identified. The rate constants of the H-atom abstraction reactions were found to primarily depend on the energy barriers following the order: O˙H>CH3O˙>H˙>C˙H3>HO˙2>O2. However, the abstraction by H˙ can dominate as temperature increases. (4) The rate constants of β-scission and isomerization reactions of PODE3 radicals were also computed. The calculated β-scission reaction rates supported the suitability of the rate analogy for PODEn, employing the long-chain PODE3. The energy barriers of the isomerization reactions with long chain transition states were comparable to the energy barrier of the β-scission reactions and are much lower than that in the case of PODE1 radicals. (5) The thermochemistry properties of all involved species, including PODE4–5 and their radicals, were calculated with the combined compound methods (CBS-APNO/G3/G4) for further combustion modeling. Considering PODE3′s nature as a long-chain PODEn, the rate constants computed for PODE3 can serve as a solid foundation for developing detailed mechanisms for PODE4–5.

Molecular Structures and Microwave Spectra of the Gas-Phase Homodimers of 3-Fluoro-1,2-epoxypropane and 3,3-Difluoro-1,2-epoxypropane.

Molecular structures for the heterochiral and homochiral gas-phase homodimers of 3-fluoro-1,2-epoxypropane and 3,3-difluoro-1,2-epoxypropane are investigated using both ab initio and density functional quantum chemistry calculations. Although microwave spectra for the heterochiral dimers are not observed as the lowest-energy isomers lack an electric dipole moment and others are presumably too high in energy, rotational spectra are observed for the homochiral dimers of each molecule that are consistent with the lowest-energy isomers of each. The presence of hydrogen atoms in the fluoromethyl groups makes it possible for these groups to participate in the intermolecular interactions that stabilize these dimers, resulting in a distinctly different bonding motif than is observed in the homodimers of 3,3,3-trifluoro-1,2-epoxypropane where the lack of a hydrogen atom prevents this possibility. The rotational spectra and energy ordering of the dimers are sufficiently well predicted with modest calculational methods to enable straightforward assignment of the observed spectra and to identify the molecular carrier of an assigned spectrum.

Experimental and computational study of polystyrene sulfonate breakdown by a Fenton reaction

Experimental studies and ab initio quantum chemistry calculations were combined to investigate the process by which a Fenton reaction breaks down polystyrene sulfonate. The experimental results show that both molecular weight reduction and loss of aromaticity occur nearly simultaneously, a finding that is supported by the calculations. The results show that more than half of the material is broken down to low molecular weight compounds (< 500 g/mol) with two molar equivalents of H2O2 per styrene monomer. The calculations provide insights into the reaction pathways and indicate that at least two hydroxyl radicals are required to cleave backbone CC bonds or to eliminate aromaticity. The calculations also show that, of the aromatic carbons, hydroxyl radical is most likely to add to the carbon bonded to sulfur. This finding explains the loss of hydrogen sulfite anion early in the process and also the efficient reduction of Fe(III) to Fe(II) through semiquinone formation. Taken together the experimental and computational results indicate that the reaction is very efficient and that very little H2O2 is lost to unproductive reactions. This high efficiency is attributed to the close association of Fe atoms with the sulfonate group such that hydroxyl radicals are generated near the polymer chains.

Dynamics of the Oxygen Atom Transfer Reaction between Carbon Dioxide and the Tantalum Cation.

The understanding of fundamental atomic-level processes often requires well-defined model systems. The oxygen atom transfer from CO2 to a transition metal cation in the gas phase presents such a model system. We investigate the reaction of Ta+ + CO2 for which the formation of TaO+ is highly efficient and attributed to multistate reactivity. Here, we study the atomistic dynamics of the oxygen atom transfer reaction by recording experimental energy and angle differential cross sections by crossed beam velocity map imaging supported by ab initio quantum chemical calculations. Product ion velocity distributions are dominated by signatures for indirect dynamics, despite the reaction being highly exothermic. Product kinetic energy distributions show little dependence on additional collision energy even with only four atoms involved, which hints at dynamical trapping behind a submerged barrier.