N4 Ligand Research Articles

Reductive Activation of O2 by Non-Heme Iron(II) Benzilate Complexes of N4 Ligands: Effect of Ligand Topology on the Reactivity of O2-Derived Oxidant.

A series of iron(II) benzilate complexes (1-7) with general formula [(L)FeII(benzilate)]+ have been isolated and characterized to study the effect of supporting ligand (L) on the reactivity of metal-based oxidant generated in the reaction with dioxygen. Five tripodal N4 ligands (tris(2-pyridylmethyl)amine (TPA in 1), tris(6-methyl-2-pyridylmethyl)amine (6-Me3-TPA in 2), N1,N1-dimethyl-N2,N2-bis(2-pyridylmethyl)ethane-1,2-diamine (iso-BPMEN in 3), N1,N1-dimethyl-N2,N2-bis(6-methyl-2-pyridylmethyl)ethane-1,2-diamine (6-Me2-iso-BPMEN in 4), and tris(2-benzimidazolylmethyl)amine (TBimA in 7)) along with two linear tetradentate amine ligands (N1,N2-dimethyl-N1,N2-bis(2-pyridylmethyl)ethane-1,2-diamine (BPMEN in 5) and N1,N2-dimethyl-N1,N2-bis(6-methyl-2-pyridylmethyl)ethane-1,2-diamine (6-Me2-BPMEN in 6)) were employed in the study. Single-crystal X-ray structural studies reveal that each of the complex cations of 1-3 and 5 contains a mononuclear six-coordinate iron(II) center coordinated by a monoanionic benzilate, whereas complex 7 contains a mononuclear five-coordinate iron(II) center. Benzilate binds to the iron center in a monodentate fashion via one of the carboxylate oxygens in 1 and 7, but it coordinates in a bidentate chelating mode through carboxylate oxygen and neutral hydroxy oxygen in 2, 3, and 5. All of the iron(II) complexes react with dioxygen to exhibit quantitative decarboxylation of benzilic acid to benzophenone. In the decarboxylation pathway, dioxygen becomes reduced on the iron center and the resulting iron-oxygen oxidant shows versatile reactivity. The oxidants are nucleophilic in nature and oxidize sulfide to sulfoxide and sulfone. Furthermore, complexes 2 and 4-6 react with alkenes to produce cis-diols in moderate yields with the incorporation of both the oxygen atoms of dioxygen. The oxygen atoms of the nucleophilic oxidants do not exchange with water. On the basis of interception studies, nucleophilic iron(II) hydroperoxides are proposed to generate in situ in the reaction pathways. The difference in reactivity of the complexes toward external substrates could be attributed to the geometry of the O2-derived iron-oxygen oxidant. DFT calculations suggest that, among all possible geometries and spin states, high-spin side-on iron(II) hydroperoxides are energetically favorable for the complexes of 6-Me3-TPA, 6-Me2-iso-BPMEN, BPMEN, and 6-Me2-BPMEN ligands, while high spin end-on iron(II) hydroperoxides are favorable for the complexes of TPA, iso-BPMEN, and TBimA ligands.

Aromaticity of metal acetylacetonates and a Möbius chelate of a cadmium(II) complex of an N4 helical ligand

Interaction of a benzene C–H tip with a metallacycle of various metal acetylacetonates are studied by means of DFT calculations at M062X/LanL2DZ and M062X/6-311++G(2d,p) levels. It is concluded that an angular interaction with a tilt angle θ of the C–H tip is diagnostic of aromaticity of a chelate ring in a metal acetylacetonate. Larger the θ value, the more aromatic is the probed molecule. This finding is supported by the known X-ray crystal structure of bis(acetylacetonato)platinum(II)-benzene. Acetylacetonate anion has 6 π electrons fulfilling Hückel’s 4n+2 rule for aromaticity. A thirteen membered 12 π electron chelate ring in a cadmium(II) complex of a helical N4 ligand is shown to be aromatic by establishing it as a Möbius object.

ChemInform Abstract: Proton‐Promoted and Anion‐Enhanced Epoxidation of Olefins by Hydrogen Peroxide in the Presence of Nonheme Manganese Catalysts.

AbstractA mononuclear nonheme manganese(II) complex bearing a tetradentate N4 ligand is found to be an efficient catalyst in the epoxidation of olefins by aqueous H2O2 in the presence of H2SO4.

Tailored synthesis of CuS nanodisks from a new macrocyclic precursor and their efficient catalytic properties on methylene blue dye degradation

In this study, CuS nanodisks have been synthesized from a tetraaza (N4) macrocyclic complex precursor by a facile wet chemical method. The crystallinity and morphology of the as-synthesized products were characterized by X-ray diffraction and transmission electron microscopy, which confirm a phase pure crystalline CuS nanostructures with ~15 to 20 nm in dimension with ~5 nm thickness. A possible formation mechanism and growth process of the CuS nanodisks are discussed using thiourea and tetraaza ligand as the sulfur donor and stabilizing agent, respectively. Cyclic N4 ligand also acts as a binding agent to template-guide the oriented growth of CuS nanodisks. The optimized geometry of ligands and complexes was calculated using B3YLP functional, which indicates that the HOMO in the complex located on metal center and N atoms are weakly bonded to the metal center. The catalytic activity of CuS nanodisks toward MB degradation with light displays the higher MB degradation rate than under dark in the presence of H2O2. The C t/C 0 plot as a function of time displays the higher MB degradation activity of CuS nanoparticles with H2O2. The recycle stability of CuS nanoparticles was even found to be >80 % after five cycles studied by repeating the MB degradation with same CuS nanoparticles sample. CuS nanostructures synthesized from a tetraaza macrocyclic complex precursor show the disk-like registry with average lateral dimension between 15 and 20 nm and thickness of 5 nm. The catalytic activity of CuS nanodisks toward MB degradation with light displays the higher MB degradation rate than in dark in the presence of H2O2.

Synthesis, Characterization, and Photocatalytic H2-Evolving Activity of a Family of [Co(N4Py)(X)](n+) Complexes in Aqueous Solution.

A series of [Co(III)(N4Py)(X)](ClO4)n (X = Cl(-), Br(-), OH(-), N3(-), NCS(-)-κN, n = 2: X = OH2, NCMe, DMSO-κO, n = 3) complexes containing the tetrapyridyl N5 ligand N4Py (N4Py = 1,1-di(pyridin-2-yl)-N,N-bis(pyridin-2-ylmethyl)methanamine) has been prepared and fully characterized by infrared (IR), UV-visible, and NMR spectroscopies, high-resolution electrospray ionization mass spectrometry (HRESI-MS), elemental analysis, X-ray crystallography, and electrochemistry. The reduced Co(II) and Co(I) species of these complexes have been also generated by bulk electrolyses in MeCN and characterized by UV-visible and EPR spectroscopies. All tested complexes are catalysts for the photocatalytic production of H2 from water at pH 4.0 in the presence of ascorbic acid/ascorbate, using [Ru(bpy)3](2+) as a photosensitizer, and all display similar H2-evolving activities. Detailed mechanistic studies show that while the complexes retain the monodentate X ligand upon electrochemical reduction to Co(II) species in MeCN solution, in aqueous solution, upon reduction by ascorbate (photocatalytic conditions), [Co(II)(N4Py)(HA)](+) is formed in all cases and is the precursor to the Co(I) species which presumably reacts with a proton. These results are in accordance with the fact that the H2-evolving activity does not depend on the chemical nature of the monodentate ligand and differ from those previously reported for similar complexes. The catalytic activity of this series of complexes in terms of turnover number versus catalyst (TONCat) was also found to be dependent on the catalyst concentration, with the highest value of 230 TONCat at 5 × 10(-6) M. As revealed by nanosecond transient absorption spectroscopy measurements, the first electron-transfer steps of the photocatalytic mechanism involve a reductive quenching of the excited state of [Ru(bpy)3](2+) by ascorbate followed by an electron transfer from [Ru(II)(bpy)2(bpy(•-))](+) to the [Co(II)(N4Py)(HA)](+) catalyst. The reduced catalyst then enters into the H2-evolution cycle.

Construction of site-specific core–shell structured nanocomposite for pH-controlled drug delivery

In this study, a pH-controlled core–shell structured site-specific magnetic nanocomposite for drug delivery was reported. Superparamagnetic Fe3O4 nanoparticles were selected to build its core for magnetic guiding purpose and mesoporous silica molecular sieve MCM-41 was chosen to construct its outer shell. The MCM-41 outer shell has highly ordered hexagonal tunnels therefore would offered enough cargo space for drug molecules. An organic ligand N1-(5H-cyclopenta[1,2-b:5,4-b′]dipyridin-5-ylidene)benzene-1,4-diamine (denoted as Dafo-Ph-NH2) was linked to the molecular sieve outer shell. There are two nitrogen atoms at the end of the ligand which are able to donate their lone pair electrons. Acidic drug molecules therefore can be bound to the ligand via weak acid–base reaction. Those drug molecules can be release in low pH solution since the H+ in the solution will compete with the ligand. The final composite was analyzed by electron microscope images, XRD, IR spectra, thermogravimetry and N2 adsorption/desorption. Its bio-compatibility was evaluated by MTT using L929 fibroblast cell line. Our Dafo-MCM-41@Fe3O4 composite shows pH-controlled and site-specific smart release properties for aspirin in vitro.

Dioxygen Activation by a Macrocyclic Copper Complex Leads to a Cu2O2 Core with Unexpected Structure and Reactivity.

We report the Cu(I)/O2 chemistry of complexes derived from the macrocylic ligands 14-TMC (1,4,8,11-tetramethyl-1,4,8,11-tetraazacyclotetradecane) and 12-TMC (1,4,7,10-tetramethyl-1,4,7,10-tetraazacyclododecane). While [(14-TMC)Cu(I)](+) is unreactive towards dioxygen, the smaller analog [(12-TMC)Cu(I)(CH3CN)](+) reacts with O2 to give a side-on bound peroxo-dicopper(II) species ((S)P), confirmed by spectroscopic and computational methods. Intriguingly, 12-TMC as a N4 donor ligand generates (S)P species, thus in contrast with the previous observation that such species are generated by N2 and N3 ligands. In addition, the reactivity of this macrocyclic side-on peroxo-dicopper(II) differs from typical (S)P species, because it reacts only with acid to release H2O2, in contrast with the classic reactivity of Cu2O2 cores. Kinetics and computations are consistent with a protonation mechanism whereby the TMC acts as a hemilabile ligand and shuttles H(+) to an isomerized peroxo core.

Hydroxylation versus Halogenation of Aliphatic C−H Bonds by a Dioxygen‐Derived Iron–Oxygen Oxidant: Functional Mimicking of Iron Halogenases

AbstractAn iron–oxygen intermediate species generated in situ in the reductive activation of dioxygen by an iron(II)–benzilate complex of a monoanionic facial N3 ligand, promoted the halogenation of aliphatic C−H bonds in the presence of a protic acid and a halide anion. An electrophilic iron(IV)–oxo oxidant with a coordinated halide is proposed as the active oxidant. The halogenation reaction with dioxygen and the iron complex mimics the activity of non‐heme iron halogenases.

Hydroxylation versus Halogenation of Aliphatic C-H Bonds by a Dioxygen-Derived Iron-Oxygen Oxidant: Functional Mimicking of Iron Halogenases.

An iron-oxygen intermediate species generated in situ in the reductive activation of dioxygen by an iron(II)-benzilate complex of a monoanionic facial N3 ligand, promoted the halogenation of aliphatic C-H bonds in the presence of a protic acid and a halide anion. An electrophilic iron(IV)-oxo oxidant with a coordinated halide is proposed as the active oxidant. The halogenation reaction with dioxygen and the iron complex mimics the activity of non-heme iron halogenases.

Proton-Promoted and Anion-Enhanced Epoxidation of Olefins by Hydrogen Peroxide in the Presence of Nonheme Manganese Catalysts

We report a remarkable Brønsted acid effect in the epoxidation of olefins by nonheme manganese catalysts and aqueous hydrogen peroxide. More specifically, a mononuclear nonheme manganese complex bearing a tetradentate N4 ligand, Mn(II)(Dbp-MCP)(OTf)2 (Dbp-MCP = (1R,2R)-N,N'-dimethyl-N,N'-bis((R)-(3,5-di-tert-butyl-phenyl)-2-pyridinylmethyl)cyclohexane-1,2-diamine; OTf(-) = CF3SO3(-)), is a highly efficient catalyst in the epoxidation of olefins by aqueous H2O2 in the presence of H2SO4 (1-3 mol %). The yields of epoxide products as well as the chemo- and enantioselectivities increase dramatically in the presence of H2SO4; no formation of epoxides is observed in the absence of H2SO4. In addition, the product yields and enantioselectivities are dependent significantly on the manganese catalysts and Brønsted acids. The catalytic epoxidation of olefins by other oxidants, such as peracids, alkyl hydroperoxides, and iodosylbenzene, is also affected by the presence of H2SO4; product yields and enantioselectivities are high and similar irrespective of the oxidants in the presence of H2SO4, suggesting that a common epoxidizing intermediate is generated in the reactions of [Mn(II)(Dbp-MCP)](2+) and the oxidants. Mechanistic studies, performed with (18)O-labeled water (H2(18)O) and cumyl hydroperoxide, reveal that a high-valent manganese-oxo species is formed as an epoxidizing intermediate via O-O bond heterolysis of Mn-OOH(R) species. The role of H2SO4 is proposed to facilitate the formation of a high-valent Mn-oxo species and to increase the oxidizing power and enantioselectivity of the Mn-oxo oxidant in olefin epoxidation reactions. Density functional theory (DFT) calculations support experimental results such as the formation of a Mn(V)-oxo species as an epoxidizing intermediate.

Substituent effects of N4 Schiff base ligands on the formation of fluoride-bridged dicobalt(ii) complexes via B-F abstraction: structures and magnetism.

We report the synthesis of two fluoride bridged cobalt(ii) dimers - [Co(μ-F)(pnN4-PhCl)2(OH2)(MeCN)](BF4)3 (1) and [Co(μ-F)2(pnN4-PhCl)2](BF4)2 (2) - and related complexes derived from propyl-bridged N4 Schiff base plus pyridine ligands. Notably, the bridging fluoride ion(s) emanate from B-F abstraction processes on the BF4 anions in the starting salt, [Co(H2O)6](BF4)2. Two types of bridging motifs are generated - mono-bridged (μ-F) or di-bridged (μ-F)2- synthetically differentiated by the absence or presence of pyridine, respectively, during metalation. The synergistic roles of pyridine and the (ClPh)N4 ligand in promoting B-F abstraction were clarified by the isolation and crystallization of the simple tetrakis-pyridine monomeric complex [Co(py)4(MeCN)2](BF4)2 (4) [no B-F abstraction]; subsequent addition of the (ClPh)N4 ligand to 4 resulted in formation of the dimeric, di-bridged complex 2. Omission of pyridine during metalation resulted in formation of the mono-bridged dimer 1. The bulky chlorophenyl substituents were obligate for B-F abstraction, as metalation of the unsubstituted N4 ligand resulted in the non-fluoride-bridged dimer, [Co(pnN4)3](BF4)4 (3). In magnetic studies, complexes 1 (μeff = 6.24μB, 298 K) and 2 (μeff = 7.70μB, 298 K) both exhibit antiferromagnetic (AFM) coupling, but to different extents. Temperature-dependent magnetic susceptibility measurements (SQUID, 2 → 300 K) reveal that the linearity of the mono-fluoride bridge in 1 [∠Co-F-Co = 159.47(11)°] results in very strong AFM coupling (J = -14.9 cm(-1)). In contrast, the more acute Co2F2 diamond core [∠Co-F-Co = 98.8(2)°, 99.1(2)°] results in a smaller extent of AFM coupling (J = -2.97 cm(-1)). Overall, the results indicate the 'non-innocence' of the BF4 counterion in cobalt(ii) chemistry, and dimers 1 and 2 affirm the effect of the geometry of the bridging fluoride ion(s) in determining the extent of AFM coupling.

Substrate-dependent aromatic ring fission of catechol and 2-aminophenol with O2 catalyzed by a nonheme iron complex of a tripodal N4 ligand.

The catalytic reactivity of an iron(ii) complex [(TPA)Fe(II)(CH3CN)2](2+) (1) (TPA = tris(2-pyridylmethyl)amine) towards oxygenative aromatic C-C bond cleavage of catechol and 2-aminophenol is presented. Complex 1 exhibits catalytic and regioselective C-C bond cleavage of 3,5-di-tert-butylcatechol (H2DBC) to form intradiol products, whereas it catalyzes extradiol-type C-C bond cleavage of 2-amino-4,6-di-tert-butylphenol (H2AP). The catalytic reactions are found to be pH-dependent and the complex exhibits maximum turnovers at pH 5 in acetonitrile-phthalate buffer. An iron(iii)-catecholate complex [(TPA)Fe(III)(DBC)](+) (2) is formed in the ring cleavage of catechol. In the extradiol-type cleavage of H2AP, an iron(iii)-2-iminobenzosemiquinonate complex [(TPA)Fe(III)(ISQ)](2+) (3) (ISQ = 4,6-di-tert-butyl-2-iminobenzosemiquinonate radical anion) is observed in the reaction pathway. This work shows the importance of the nature of 'redox non-innocent' substrates in governing the mode of ring fission reactivity.

Non-heme μ-Oxo- and bis(μ-carboxylato)-bridged diiron(iii) complexes of a 3N ligand as catalysts for alkane hydroxylation: stereoelectronic factors of carboxylate bridges determine the catalytic efficiency.

A series of non-heme (μ-oxo)bis(μ-dicarboxylato)-bridged diiron(iii) complexes, [Fe2(O)(OOCH)2(L)2](2+)1, [Fe2(O)(OAc)2(L)2](2+)2, [Fe2(O)(Me3AcO)2(L)2](2+)3, [Fe2(O)(OBz)2(L)2](2+)4, [Fe2(O)(Ph2AcO)2(L)2](2+)5 and [Fe2(O)(Ph3AcO)3(L)2](2+)6, where L = N,N-dimethyl-N'-(pyrid-2-ylmethyl)ethylenediamine, OAc(-) = acetate, Me3AcO(-) = trimethylacetate, OBz(-) = benzoate, Ph2AcO(-) = diphenylacetate and Ph3AcO(-) = triphenylacetate, have been isolated and characterized using elemental analysis and spectral and electrochemical techniques. They have been studied as catalysts for the selective oxidation of alkanes using m-chloroperbenzoic acid (m-CPBA) as the oxidant. Complexes 2, 3, and 4 possess a distorted bioctahedral geometry in which each iron atom is coordinated to an oxygen atom of the μ-oxo bridge, two oxygen atoms of the μ-carboxylate bridge and three nitrogen atoms of the 3N ligand. In an acetonitrile/dichloromethane solvent mixture all the complexes display a d-d band characteristic of the triply bridged diiron(iii) core, revealing that they retain their identity in solution. Upon replacing electron-donating substituents on the bridging carboxylates by electron-withdrawing ones the E1/2 value of the one-electron Fe(III)Fe(III)→ Fe(III)Fe(II) reduction becomes less negative. On adding one equivalent of Et3N to a mixture of one equivalent of the complex and an excess of m-CPBA in the acetonitrile/dichloromethane solvent mixture an intense absorption band (λmax, 680-720 nm) appears, which corresponds to the formation of a mixture of complex species. All the complexes act as efficient catalysts for the hydroxylation of cyclohexane with 380-500 total turnover numbers and good alcohol selectivity (A/K, 6.0-10.1). Adamantane is selectively oxidized to 1-adamantanol and 2-adamantanol (3°/2°, 12.9-17.1) along with a small amount of 2-adamantanone (total TON, 381-476), and interestingly, the sterically demanding trimethylacetate bridge around the diiron(iii) centre leads to high 3°/2° bond selectivity; on the other hand, the sterically demanding triphenylacetate bridge gives a lower 3°/2° bond selectivity. A remarkable linear correlation between the pKa of the bridging carboxylate and TON for both cyclohexane and adamantane oxidation is observed, illustrating the highest catalytic activity for 3 with strongly electron-releasing trimethylacetate bridges.

Aliphatic C-C Bond Cleavage of α-Hydroxy Ketones by Non-Heme Iron(II) Complexes: Mechanistic Insight into the Reaction Catalyzed by 2,4'-Dihydroxyacetophenone Dioxygenase.

2,4'-Dihydroxyacetophenone dioxygenase (DAD) is a bacterial non-heme enzyme that carries out oxygenative aliphatic C-C bond cleavage of 2,4'-dihydroxyacetophenone (an α-hydroxy ketone) with the incorporation of both the oxygen atoms of dioxygen into the cleavage products. The crystal structure of the iron enzyme DAD has recently been determined, but very little is known about the mechanism of the C-C bond cleavage reaction. With the objective of gaining insights into the mechanism of the reaction catalyzed by DAD, six new biomimetic iron(II)-α-hydroxy ketone complexes, [(Tp(Ph2))Fe(II)(PHAP)] (1), [(Tp(Ph2))Fe(II)(HCH)] (2), [(Tp(Ph2))Fe(II)(HBME)] (3), [(Tp(Ph2))Fe(II)(CHPE)] (4), [(6-Me3-TPA)Fe(II)(PHAP)](+) (5), and [(6-Me3-TPA)Fe(II)(HCH)](+) (6) (Tp(Ph2) = hydrotris(3,5-diphenylpyrazol-1-yl)borate, 6-Me3-TPA = tris(6-methyl-2-pyridylmethyl)amine, PHAP-H = 2-phenyl-2-hydroxyacetophenone, HCH-H = 2-hydroxycyclohexanone, HBME-H = 2-hydroxy-1,2-bis(4-methoxyphenyl)ethanone, and CHPE-H = 1-(4-chlorophenyl)-2-hydroxy-2-phenylethanone), have been isolated and characterized. The single-crystal X-ray structure of 2 shows a five-coordinate iron(II) complex with one tridentate facial ligand and a monoanionic bidentate α-hydroxy ketone, resulting in a distorted-square-pyramidal coordination geometry at the iron center. The iron(II) complexes react with dioxygen to oxidatively cleave the aliphatic C-C bonds of the coordinated α-hydroxy ketones to afford 2 equiv of carboxylic acids. Mechanistic studies reveal that the C-C bond cleavage reaction proceeds through an intradiol pathway. Additionally, the coordinated α-hydroxy ketones in all of the complexes, except in complex 4, undergo two-electron oxidation to form the corresponding 1,2-diketones. However, the yields of 1,2-diketones are higher with the iron complexes of the tripodal N4 ligand (6-Me3-TPA) in comparison to the facial N3 ligand (Tp(Ph2)). These results strongly support the natural selection of a facial N3 environment at the active site of the iron enzyme DAD.

Monoanionic Dipyrrin–Pyridine Ligands: Synthesis, Structure and Photophysical Properties

AbstractA novel monoanionic tetradentate N4 ligand (F5DPPy) based on a dipyrromethene skeleton as a molecular platform and decorated with pyridine rings at the 1‐ and 9‐positions of the dipyrrin motif has been prepared and characterized. Interestingly, although this ligand is weakly fluorescent, it presents a chelation‐enhanced fluorescence effect of around 150 times upon coordination to ZnII. Time‐dependent (TD) DFT calculations reproduce nicely the spectroscopic features of both the ligand and the complex, and analysis of the electron density redistribution in the excited state suggests that a better orbital overlap of the HOMO and LUMO in F5DPPyZnCl compared with F5DPPy is responsible for the more intense transitions observed with the former system. As such, this ligand opens interesting perspectives in the design of ratiometric sensors.

Molybdenum complexes of chiral C2-symmetric picchxn-type ligands: Synthesis, characterization, and structural studies

A series of molybdenum complexes based on chiral C2-symmetric picchxn-type ligands (N4 ligands, defined as trans-N,N′-bis(heterocycl-2-ylmethyl)-1,2-diaminocyclohexanes) has been synthesized and characterized. Reported and novel picchxn-type ligands form (κ3-N4)Mo(CO)3, [(κ4-N4)Mo(NO)(CO)]PF6, and [(κ4-N4)Mo(NO)X]PF6 (X=Br, I) compounds. Multiple tridentate (κ3) and tetradentate (κ4) ligand configurations were observed, and the favored κ4 configuration was found to vary with N4 heterocycle identity. Heterocycle variation allowed for directed modification of the molybdenum electronic characteristics, but none of the studied {(κ4-N4)Mo(NO)}+ fragments was found to be a suitable π-base for dearomatization chemistry. The crystal structures of eight molybdenum complexes with picchxn-type ligands were determined.

A simple and facile to prepare Pd(II) complex containing the pyridyl imine ligand [C5H4N-2-CH3C[dbnd]N-(CH2)3NH2]. Structural characterization and catalytic evaluation in Suzuki–Miyaura C–C couplings

The facile and simple synthesis and structural characterization of a Pd(II) complex derived from the ligand N1-(1-(pyridin-2-yl)ethylidene)propane-1,3-diamine (L1) is described. The Pd(II) species [Pd(L1)Cl][BF4] (PdL1) has been fully characterized and its structure unequivocally determined by single crystal X-ray diffraction techniques. The molecular structure of PdL1 shows the ligand L1 coordinated in a κ3-N,N,N-tridentate fashion thus affording a slightly distorted square planar compound. This species was employed as catalyst in Suzuki–Miyaura couplings affording good to excellent yields. Furthermore, in the solid state this compound exhibited extended hydrogen-bond networks.

Molecular Catalysis of the Electrochemical and Photochemical Reduction of CO2 with Earth-Abundant Metal Complexes. Selective Production of CO vs HCOOH by Switching of the Metal Center

Molecular catalysis of carbon dioxide reduction using earth-abundant metal complexes as catalysts is a key challenge related to the production of useful products--the "solar fuels"--in which solar energy would be stored. A direct approach using sunlight energy as well as an indirect approach where sunlight is first converted into electricity could be used. A Co(II) complex and a Fe(III) complex, both bearing the same pentadentate N5 ligand (2,13-dimethyl-3,6,9,12,18-pentaazabicyclo[12.3.1]octadeca-1(18),2,12,14,16-pentaene), were synthesized, and their catalytic activity toward CO2 reduction was investigated. Carbon monoxide was formed with the cobalt complex, while formic acid was obtained with the iron-based catalyst, thus showing that the catalysis product can be switched by changing the metal center. Selective CO2 reduction occurs under electrochemical conditions as well as photochemical conditions when using a photosensitizer under visible light excitation (λ > 460 nm, solvent acetonitrile) with the Co catalyst. In the case of the Fe catalyst, selective HCOOH production occurs at low overpotential. Sustained catalytic activity over long periods of time and high turnover numbers were observed in both cases. A catalytic mechanism is suggested on the basis of experimental results and preliminary quantum chemistry calculations.

Mechanism of Asymmetric Hydrogenation of Aromatic Ketones Catalyzed by a Combined System of Ru(π-CH2C(CH3)CH2)2(cod) and the Chiral sp(2)N/sp(3)NH Hybrid Linear N4 Ligand Ph-BINAN-H-Py.

The combination of a Goodwin-Lions-type chiral N4 ligand, (R)-Ph-BINAN-H-Py ((R)-3,3'-diphenyl-N(2),N(2')-bis((pyridin-2-yl)methyl)-1,1'-binaphthyl-2,2'-diamine; L), with Ru(π-CH2C(CH3)CH2)2(cod) (A) (cod = 1,5-cyclooctadiene) catalyzes the hydrogenation of acetophenone (AP) to (R)-1-phenylethanol (PE) with a high enantiomer ratio (er). Almost no Ru complex forms, with A and L remaining intact throughout the reaction while generating PE quantitatively according to [PE] = k(obs)t(2). An infinitesimal amount of reactive and unstable RuH2L (B) with C2-Λ-cis-α stereochemistry is very slowly and irreversibly generated from A by the action of H2 and L, which rapidly catalyzes the hydrogenation of AP via Noyori's donor-acceptor bifunctional mechanism. A CH-π-stabilized Si-face selective transition state, CSi, gives (R)-PE together with an intermediary Ru amide, D, which is inhibited predominantly by formation of the Ru enolate of AP. The rate-determining hydrogenolysis of D completes the cycle. The time-squared term relates both to the preliminary step before the cycle and to the cycle itself, with a highly unusual eight-order difference in the generation and turnover frequency of B. This mechanism is fully supported by a series of experiments including a detailed kinetic study, rate law analysis, simulation of t/[PE] curves with fitting to the experimental observations at the initial reaction stage, X-ray crystallographic analyses of B-related octahedral metal complexes, and Hammett plot analyses of electronically different substrates and ligands in their enantioselectivities.

Olefin cis-Dihydroxylation and Aliphatic C-H Bond Oxygenation by a Dioxygen-Derived Electrophilic Iron-Oxygen Oxidant.

Many iron-containing enzymes involve metal-oxygen oxidants to carry out O2-dependent transformation reactions. However, the selective oxidation of C-H and C=C bonds by biomimetic complexes using O2 remains a major challenge in bioinspired catalysis. The reactivity of iron-oxygen oxidants generated from an Fe(II)-benzilate complex of a facial N3 ligand were thus investigated. The complex reacted with O2 to form a nucleophilic oxidant, whereas an electrophilic oxidant, intercepted by external substrates, was generated in the presence of a Lewis acid. Based on the mechanistic studies, a nucleophilic Fe(II)-hydroperoxo species is proposed to form from the benzilate complex, which undergoes heterolytic O-O bond cleavage in the presence of a Lewis acid to generate an Fe(IV)-oxo-hydroxo oxidant. The electrophilic iron-oxygen oxidant selectively oxidizes sulfides to sulfoxides, alkenes to cis-diols, and it hydroxylates the C-H bonds of alkanes, including that of cyclohexane.