Abstract
The tyre/road noise depends on type and speed of vehicles and on the characteristics of road pavement. Vehicle traffic load and weather conditions lead to significant changes in the characteristics of the materials used to build the wearing course. This applies especially to road pavements with the increased void contents. Clogging of the pores, changes in the characteristics of the binder and the damage to the wearing course influence changes in the acoustic properties of the road pavement over time. The article presents the results of the studies on noise level carried out in 2011 and 2014 by the Statistical Pass-By method (SPB) on porous asphalt concrete (PAC), very thin asphalt concrete (VTAC) and stone mastic asphalt (SMA). The wearing courses with the increased void contents immediately after building constitute a very advantageous solution compared with traditional road pavements (dense asphalt concrete, stone mastic asphalt). However, the unfavourable location of the road with porous wearing course, lack of systematic cleaning of porous layers or inappropriate maintenance methods in winter lead to the loss of the acoustic durability of low-noise pavements within a few years of their exploitation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Transportation Research Part D: Transport and Environment
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
