Abstract
TFET (Tunnel field effect transistor) is widely used in low voltage operating electronic devices because of the ability to achieve a subthreshold swing lower than 60mV/decade. Lower subthreshold swing is also a root cause for the low power and the high speed behavior of the device. Conduction of current in TFET is due to band to band tunneling. TFET has lower-off currents as compared to MOSFET. Because of which power dissipation is also lower. In this paper, Kane-Sze formula based analytical model is used to evaluate and improve drain current. Using this analytic model, the obtained value of drain current is 2.3mA at V ds =0.4V, transconductance (gm) is 160V−1, transconductance to drain current ratio is 2200 V−1, output resistance (R0) is 1.E4 ohm, intrinsic gain of the TFET is obtained 1.0E5 V/V. The fabrication of TFET is done using Sentaurus TCAD tool. Also, the output characteristics of the TFET and tunneling phenomenon have been analyzed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.