Abstract
In this paper, a 2MW variable speed, pitch-regulated Doubly-fed Induction Generator (DFIG) with a speed range of 800-2000 rpm was studied for steady-state analysis. The DFIG was modelled in the Matlab/Simulink environment. The rotor-side converter utilized closed-loop stator flux-oriented vector control for managing the DFIG model. This method allows for rapid control and experimenting of grid-connected, variable speed DFIG wind turbines to examine their steady-state and energetic characteristics beneath ordinary and disturbed wind conditions when connected to a wind farm. The steady-state behavior of the wind turbine generator was derived at two different magnetizing levels: one with the reactive power of the stator equal to zero (Qs = 0), and the other with the direct current of the rotor equal to zero (Idr = 0). Simulation results show that the machine has higher efficiency when magnetized through the stator as compared with magnetization of the machine through the rotor. To come out with the DFIG transitory stability simulation results traditional controllers' for active and reactive power were compared with an adaptive adaptive tracking, self-tuned feedforward proportional integral regulating model for peak performance. Additionally, stability and instability were studied by solving the Swing equation using the Runge-Kutta method of order four. In a steady-state condition for the generator, the acceleration torque (Ta) reaches zero, which signifies that the mechanical torque (Tm) matches the electrical torque (Te). In the stability investigation, Tm is assumed to be constant. The findings provide valuable insights into the control strategies required for enhancing the reliability and efficiency of wind turbines in variable wind conditions.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call