Abstract

Metal oxide semiconductor (MOS) capacitance within field effect transistors are of great interest in terahertz (THz) imaging, as they permit high-sensitivity, high-resolution detection of chemical species and images using integrated circuit technology. High-frequency detection based on MOS technology has long been justified using a mechanism described by the plasma wave detection theory. The present study introduces a new interpretation of this effect based on the self-mixing process that occurs in the field effect depletion region, rather than that within the channel of the transistor. The proposed model formulates the THz modulation mechanisms of the charge in the potential barrier below the oxide based on the hydrodynamic semiconductor equations solved for the small-signal approximation. This approach explains the occurrence of the self-mixing process, the detection capability of the structure and, in particular, its frequency dependence. The dependence of the rectified voltage on the bias gate voltage, substrate doping, and frequency is derived, offering a new explanation for several previous experimental results. Harmonic balance simulations are presented and compared with the model results, fully validating the model’s implementation. Thus, the proposed model substantially improves the current understanding of THz rectification in semiconductors and provides new tools for the design of detectors.

Highlights

  • The low-cost detection of high-frequency electromagnetic radiation, terahertz (THz) radiation, using integrated commercial electronics represents a challenging task that is pushing significant experimental and theoretical activities

  • The developed model offers a comprehensive description of the vector dynamics within the field is 8 nm, and the gate voltage above the flat band is VG −VFB = 0.17 V

  • The model presented in this paper is strictly 1D, as it focuses on an analytical description of the self-mixing process in the depletion region under the gate

Read more

Summary

Introduction

The low-cost detection of high-frequency electromagnetic radiation, terahertz (THz) radiation, using integrated commercial electronics represents a challenging task that is pushing significant experimental and theoretical activities. Novel technologies promise to achieve resolved images that may eventually be colored by the interaction with material chemical bonding. The radiation spectrum of interest covers practically the entire gap between the microwave and infrared regions. As THz radiation is nonionizing and the associated power is low, it is considered safe. THz wavelengths are able to deeply scan the material under investigation. The combination of these safety and penetration characteristics is important in different applications, such as medical imaging, security/surveillance imaging, and spectroscopic applications

Results
Discussion
Conclusion

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.