Abstract
This study investigated the position of electrons and holes in the ON and OFF states of double-gate junctionless transistors, and then three structures were proposed to create an electron-filled region exposing the drain-side inside the channel to the electron screening effect. Formation of an electron cloud in the channel and on the drain-side damps the electric field resulting from the drain voltage as the electric field passes through the electron cloud before reaching the main channel. Accordingly, in the structure with a drain-side gate, with the electric field decay introduced by the drain to the main channel, the carrier density increased compared to other structures, eventually reducing drain leakage current and improving the channel length modulation (CLM), threshold voltage, drain induced barrier lowering effect, and subthreshold slope in this structure. In the N+ pocket structure, despite the decrease in the electric field resulting from the drain voltage, the drain leakage current and the CLM were increased. In the N+ SiGe pocket structure, although the electric field resulting from the drain voltage along the channel length was reduced compared to the main structure, the drain leakage current and CLM experienced an increase. Moreover, the results showed that at low drain voltages, the drain leakage current in the N+ pocket structure was higher than that of the N+ SiGe pocket, but at high drain voltages, the order was reversed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.