Abstract
This study focuses on the preparation, thermal properties and thermal reliability of capric acid (CA)/palmitic acid (PA) mixture as phase change material (PCM) for low temperature latent heat thermal energy storage (LHTES). The differential scanning calorimetry (DSC) results indicated that the CA/PA mixture with eutectic composition (76.5/23.5 wt.%) was suitable PCM for low temperature LHTES applications in terms of melting and freezing temperatures (Tm=21.85 °C; Tf=22.15 °C) and latent heats of melting and freezing (ΔHm=171.22 J/g; ΔHf=173.16 J/g). The thermal properties make it potential PCM for LHTES systems used in heating, ventilation, and air conditioning applications. Accelerated thermal cycling tests showed that the eutectic mixture as a PCM has good long-term thermal reliability. The probable reasons of the changes occurred in thermal properties of the PCM during accelerated thermal cycling were also investigated using Fourier Transform Infrared (FT-IR) spectroscopy method.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.