Capric–myristic acid/vermiculite composite as form-stable phase change material for thermal energy storage

Abstract

Phase change materials (PCMs) can be incorporated with building materials to obtain novel form-stable composite PCM which has effective energy storage performance in latent heat thermal energy storage (LHTES) systems. In this study, capric acid (CA)–myristic acid (MA) eutectic mixture/vermiculite (VMT) composite was prepared as a novel form-stable PCM using vacuum impregnation method. The composite PCM was characterized using scanning electron microscope (SEM) and Fourier transformation infrared (FT-IR) analysis technique. Thermal properties and thermal reliability of the composite PCM were determined by differential scanning calorimetry (DSC) analysis. The CA–MA eutectic mixture could be retained by 20 wt% into pores of the VMT without melted PCM seepage from the composite and therefore, this mixture was described as form-stable composite PCM. Thermal cycling test showed that the form-stable composite PCM has good thermal reliability and chemical stability although it was subjected to 3000 melting/freezing cycling. Thermal conductivity of the form-stable CA–MA/VMT composite PCM was increased by about 85% by introducing 2 wt% expanded graphite (EG) into the composite. The increase in thermal conductivity was confirmed by comparison of the melting and freezing times of the CA–MA/VMT composite with that of CA–MA/VMT/EG composite. The form-stable PCM including EG can be used as energy absorbing building material such as lightweight aggregate for plaster, concrete compounds, fire stop mortar, and component of interior fill for wallboards or hollow bricks because of its good thermal properties, thermal and chemical reliability and thermal conductivity.