Performance of emergency mechanical ventilators in response to the covid-19 pandemic: an intercomparison study.

Abstract

Emergency mechanical ventilators developed during the pandemic were used to meet the high demand in intensive care units to care for COVID-19 patients. An example of such ventilators is Masi, developed in Peru and installed in more than 15 hospitals around the country. This study aimed to compare Masi's performance with other emergency mechanical ventilators manufactured during the covid-19 pandemic such as Neyün, Spiro Wave and a prototype developed by the Faculty of Engineering of the National University of Asuncion (FIUNA). Three configurations of a test lung were used, combining different values of resistance and compliance (C1, C2 and C3). Ventilators were set to volume-controlled ventilation with tidal volume = 400 mL, respiratory rate = 12 breaths/minute, and positive end-expiratory pressure (PEEP) = 8 cm H2O. These parameters were measured in a series of ten two-minute tests which then were evaluated through a two-way analysis of variance, considering the type of ventilator and test lung configuration as the two independent variables. For target values, MASI delivered VT that ranged from 319 to 432 ml (-20 to +8%), respiratory rate of 12 bpm, and PEEP from 8.4 to 9.5 cm H2O (+5 to +20%). In contrast, for instance, Neyün delivered VT that ranged from 199 to 543 ml (-50 to +35%) and PEEP from 7.05 to 9.21 cm H2O (--11 to +15%), with p<0.05. The analysis of variance showed that he differences between preset and delivered parameters were influenced by the type of ventilator and, significantly, by the test lung configuration.Clinical Relevance- This establishes the most advantageous conditions in which three emergency mechanical ventilators work and a quantitative perspective in this topic.