Abstract
A novel all-silica fiber optic Fabry-Perot (FP) pressure sensor with pressure leading-in tube based on microbubble structure is developed and experimentally demonstrated. The FP cavity is formed by fixing the end face of the single-mode fiber (SMF) parallel to the outer surface of the microbubble, in which the microbubble with a diameter of about 318 μm is constructed at the end of silica hollow tube. When external pressure is transmitted on the inner surface of the microbubble by the pressure leading-in tube, the FP cavity length changes with the diameter of microbubble. Experimental results show that such a sensor has a linear sensitivity of approximately 4.84 nm/MPa at room temperature over the pressure range of 1.1 MPa; the sensor has a very low temperature coefficient of approximately 2 pm/°C from room temperature to 600°C. The sensor has advantages of extremely low temperature coefficient, compact structure, and small size, which has potential applications for measuring pressure in high-temperature environment.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
