Abstract
To validate Monte Carlo codes for the prediction of radiation damage in metals irradiated by >100MeV protons, the defect-induced electrical resistivity changes related to the displacement cross-section of copper were measured with 125MeV proton irradiation at 12K. The cryogenic irradiation system was developed with a Gifford–McMahon cryocooler to cool the sample via an oxygen-free high-conductivity copper plate by conduction cooling. The sample was a copper wire with a 250-μm diameter and 99.999% purity sandwiched between two aluminum nitride ceramic sheets. The electrical resistivity changes of the copper wire were measured using the four-probe technique. After 125MeV proton irradiation with 1.45×1018 protons/m2 at 12K, the total resistivity increase was 4.94×10−13Ωm (resistance increase: 1.53μΩ), while the resistivity of copper before irradiation was 9.44×10−12Ωm (resistance: 29.41μΩ). The resistivity increase did not change during annealing after irradiation below 15K. The experimental displacement cross-section for 125MeV irradiation shows similar results to the experimental data for 1.1 and 1.94GeV. Comparison with the calculated results indicated that the defect production efficiency in Monte Carlo codes gives a good quantitative description of the displacement cross-section in the energy region >100MeV.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call