Finite element analysis with deformed shape constraints generated by laser‐scanned point clouds

Abstract

AbstractThis article proposes a computational method for finite element analysis with deformed shape constraints for analyzing constructed structures to account for deformations that occur before shape measurement by a terrestrial laser scanner (TLS). In this method, point clouds obtained by a TLS are considered as a partial surface of the deformed structure. An analysis model is assumed to be created from CAD data or drawings. The analysis is performed under deformed shape constraints, namely, the deformed surface constraints or the normal vector constraints, which are generated by the point clouds. These constraints are introduced to reproduce the current displacements and stresses for the structure through the analysis. This method was applied to analyses of a plate and a desk using point clouds, which were created virtually on a computer or obtained by a TLS in the numerical examples. The results showed that this method can consider unexpected deformations that occur before laser scanning. Although the computed stresses oscillated when the scanned point cloud was used due to measurement errors and conventional point cloud processing methods, the stress values were responsive enough to indicate unnatural shapes of the deformed structure. Moreover, the oscillation was observed only in areas with constraints, whereas it was not seen in areas without constraints.